Vulnerability Summary for the Week of May 20, 2024
Released
May 28, 2024
Document ID
SB24-149
The CISA Vulnerability Bulletin provides a summary of new vulnerabilities that have been recorded in the past week. In some cases, the vulnerabilities in the bulletin may not yet have assigned CVSS scores.
Vulnerabilities are based on the Common Vulnerabilities and Exposures (CVE) vulnerability naming standard and are organized according to severity, determined by the Common Vulnerability Scoring System (CVSS) standard. The division of high, medium, and low severities correspond to the following scores:
- High: vulnerabilities with a CVSS base score of 7.0–10.0
- Medium: vulnerabilities with a CVSS base score of 4.0–6.9
- Low: vulnerabilities with a CVSS base score of 0.0–3.9
Entries may include additional information provided by organizations and efforts sponsored by CISA. This information may include identifying information, values, definitions, and related links. Patch information is provided when available. Please note that some of the information in the bulletin is compiled from external, open-source reports and is not a direct result of CISA analysis.
Vulnerability Severity:
High Vulnerabilities
| Primary Vendor -- Product | Description | Published | CVSS Score | Source & Patch Info |
|---|---|---|---|---|
| ASUS--ExpertWiFi | ASUS routers supporting custom OpenVPN profiles are vulnerable to a code execution vulnerability. An authenticated and remote attacker can execute arbitrary operating system commands by uploading a crafted OVPN profile. Known affected routers include ASUS ExpertWiFi, ASUS RT-AX55, ASUS RT-AX58U, ASUS RT-AC67U, ASUS RT-AC68R, ASUS RT-AC68U, ASUS RT-AX86, ASUS RT-AC86U, ASUS RT-AX88U, and ASUS RT-AX3000. | 2024-05-20 | 7.2 | CVE-2024-0401 disclosure@vulncheck.com |
| Adobe--Acrobat Reader | Acrobat Reader versions 20.005.30574, 24.002.20736 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | 2024-05-23 | 7.8 | CVE-2024-30279 psirt@adobe.com |
| Adobe--Acrobat Reader | Acrobat Reader versions 20.005.30574, 24.002.20736 and earlier are affected by an out-of-bounds read vulnerability when parsing a crafted file, which could result in a read past the end of an allocated memory structure. An attacker could leverage this vulnerability to execute code in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | 2024-05-23 | 7.8 | CVE-2024-30280 psirt@adobe.com |
| Byron--gitoxide | gitoxide is a pure Rust implementation of Git. During checkout, `gix-worktree-state` does not verify that paths point to locations in the working tree. A specially crafted repository can, when cloned, place new files anywhere writable by the application. This vulnerability leads to a major loss of confidentiality, integrity, and availability, but creating files outside a working tree without attempting to execute code can directly impact integrity as well. This vulnerability has been patched in version(s) 0.36.0. | 2024-05-23 | 8.8 | CVE-2024-35186 security-advisories@github.com |
| Cisco--Cisco Firepower Management Center | A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. This vulnerability exists because the web-based management interface does not adequately validate user input. An attacker could exploit this vulnerability by authenticating to the application and sending crafted SQL queries to an affected system. A successful exploit could allow the attacker to obtain any data from the database, execute arbitrary commands on the underlying operating system, and elevate privileges to root. To exploit this vulnerability, an attacker would need at least Read Only user credentials. | 2024-05-22 | 8.8 | CVE-2024-20360 ykramarz@cisco.com |
| Dolibarr--ERP CMS | Vulnerabilities in Dolibarr ERP - CRM that affect version 9.0.1 and allow SQL injection. These vulnerabilities could allow a remote attacker to send a specially crafted SQL query to the system and retrieve all the information stored in the database through the parameters sortorder y sortfield in /dolibarr/admin/dict.php. | 2024-05-24 | 9.1 | CVE-2024-5314 cve-coordination@incibe.es |
| Dolibarr--ERP CMS | Vulnerabilities in Dolibarr ERP - CRM that affect version 9.0.1 and allow SQL injection. These vulnerabilities could allow a remote attacker to send a specially crafted SQL query to the system and retrieve all the information stored in the database through the parameters viewstatut in /dolibarr/commande/list.php. | 2024-05-24 | 9.1 | CVE-2024-5315 cve-coordination@incibe.es |
| Flexense--VX Search Enterprise | A vulnerability has been discovered in VX Search Enterprise affecting version 10.2.14 that could allow an attacker to execute persistent XSS through /setup_odbc in odbc_data_source, odbc_user and odbc_password parameters. This vulnerability could allow an attacker to store malicious JavaScript payloads on the system to be triggered when the page loads. | 2024-05-24 | 7.1 | CVE-2023-49572 cve-coordination@incibe.es |
| Flexense--VX Search Enterprise | A vulnerability has been discovered in VX Search Enterprise affecting version 10.2.14 that could allow an attacker to execute persistent XSS through /add_command_action in action_value. This vulnerability could allow an attacker to store malicious JavaScript payloads on the system to be triggered when the page loads. | 2024-05-24 | 7.1 | CVE-2023-49573 cve-coordination@incibe.es |
| Flexense--VX Search Enterprise | A vulnerability has been discovered in VX Search Enterprise affecting version 10.2.14 that could allow an attacker to execute persistent XSS through /add_job in job_name. This vulnerability could allow an attacker to store malicious JavaScript payloads on the system to be triggered when the page loads. | 2024-05-24 | 7.1 | CVE-2023-49574 cve-coordination@incibe.es |
| Flexense--VX Search Enterprise | A vulnerability has been discovered in VX Search Enterprise affecting version 10.2.14 that could allow an attacker to execute persistent XSS through /setup_smtp in smtp_server, smtp_user, smtp_password and smtp_email_address parameters. This vulnerability could allow an attacker to store malicious JavaScript payloads on the system to be triggered when the page loads. | 2024-05-24 | 7.1 | CVE-2023-49575 cve-coordination@incibe.es |
| Fluent Bit--Fluent Bit | A memory corruption vulnerability in Fluent Bit versions 2.0.7 thru 3.0.3. This issue lies in the embedded http server's parsing of trace requests and may result in denial of service conditions, information disclosure, or remote code execution. | 2024-05-20 | 9.8 | CVE-2024-4323 vulnreport@tenable.com vulnreport@tenable.com |
| Genetech Solutions--Pie Register - Social Sites Login (Add on) | The Pie Register - Social Sites Login (Add on) plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.7.7. This is due to insufficient verification on the user being supplied during a social login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. | 2024-05-24 | 9.8 | CVE-2024-4544 security@wordfence.com security@wordfence.com |
| GitLab--GitLab | A XSS condition exists within GitLab in versions 15.11 before 16.10.6, 16.11 before 16.11.3, and 17.0 before 17.0.1. By leveraging this condition, an attacker can craft a malicious page to exfiltrate sensitive user information. | 2024-05-23 | 8 | CVE-2024-4835 cve@gitlab.com cve@gitlab.com |
| IBM--i | IBM Performance Tools for i 7.2, 7.3, 7.4, and 7.5 could allow a local user to gain elevated privileges due to an unqualified library call. A malicious actor could cause user-controlled code to run with administrator privilege. IBM X-Force ID: 284563. | 2024-05-22 | 7.4 | CVE-2024-27264 psirt@us.ibm.com psirt@us.ibm.com |
| Justice AV Solutions--Viewer | Justice AV Solutions Viewer Setup 8.3.7.250-1 contains a malicious binary when executed and is signed with an unexpected authenticode signature. A remote, privileged threat actor may exploit this vulnerability to execute of unauthorized PowerShell commands. | 2024-05-23 | 8.4 | CVE-2024-4978 9119a7d8-5eab-497f-8521-727c672e3725 |
| LCDS--LAquis SCADA | There are multiple ways in LCDS LAquis SCADA for an attacker to access locations outside of their own directory. | 2024-05-21 | 7.8 | CVE-2024-5040 ics-cert@hq.dhs.gov |
| ManageEngine--ADAudit Plus | Zoho ManageEngine ADAudit Plus versions below 7271 allows SQL Injection while getting aggregate report data. | 2024-05-20 | 8.3 | CVE-2023-49330 0fc0942c-577d-436f-ae8e-945763c79b02 |
| ManageEngine--ADAudit Plus | Zoho ManageEngine ADAudit Plus versions below 7271 allows SQL injection in the aggregate reports search option. | 2024-05-20 | 8.3 | CVE-2023-49331 0fc0942c-577d-436f-ae8e-945763c79b02 |
| ManageEngine--ADAudit Plus | Zoho ManageEngine ADAudit Plus versions below 7271 allows SQL injection while adding file shares. | 2024-05-20 | 8.3 | CVE-2023-49332 0fc0942c-577d-436f-ae8e-945763c79b02 |
| ManageEngine--ADAudit Plus | Zoho ManageEngine ADAudit Plus versions below 7271 allows SQL injection in the dashboard graph feature. | 2024-05-20 | 8.3 | CVE-2023-49333 0fc0942c-577d-436f-ae8e-945763c79b02 |
| ManageEngine--ADAudit Plus | Zoho ManageEngine ADAudit Plus versions below 7271 allows SQL Injection while exporting a full summary report. | 2024-05-20 | 8.3 | CVE-2023-49334 0fc0942c-577d-436f-ae8e-945763c79b02 |
| ManageEngine--ADAudit Plus | Zoho ManageEngine ADAudit Plus versions below 7271 allows SQL injection while getting file server details. | 2024-05-20 | 8.3 | CVE-2023-49335 0fc0942c-577d-436f-ae8e-945763c79b02 |
| ManageEngine--PAM360 | Zoho ManageEngine PAM360 version 6601 is vulnerable to authorization vulnerability which allows a low-privileged user to perform admin actions. Note: This vulnerability affects only the PAM360 6600 version. No other versions are applicable to this vulnerability. | 2024-05-20 | 8.1 | CVE-2024-27312 0fc0942c-577d-436f-ae8e-945763c79b02 |
| MemberPress--Memberpress | The Memberpress plugin for WordPress is vulnerable to Blind Server-Side Request Forgery in all versions up to, and including, 1.11.29 via the 'mepr-user-file' shortcode. This makes it possible for authenticated attackers, with Contributor-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. | 2024-05-22 | 8.5 | CVE-2024-5031 security@wordfence.com security@wordfence.com |
| Microsoft--Microsoft Edge (Chromium-based) | Microsoft Edge (Chromium-based) Information Disclosure Vulnerability | 2024-05-25 | 7.1 | CVE-2024-30056 secure@microsoft.com |
| OpenCTI-Platform--opencti | OpenCTI is an open source platform allowing organizations to manage their cyber threat intelligence knowledge and observables. Due to lack of certain security controls on the profile edit functionality, an authenticated attacker with low privileges can gain administrative privileges on the web application. | 2024-05-23 | 8.3 | CVE-2024-26139 security-advisories@github.com |
| OpenText--ArcSight Enterprise Security Manager | A Stored Cross-Site Scripting (XSS) vulnerability has been identified in OpenText ArcSight Enterprise Security Manager and ArcSight Platform. The vulnerability could be remotely exploited. | 2024-05-20 | 8.7 | CVE-2024-2835 security@opentext.com |
| OpenText--ArcSight Enterprise Security Manager | A Stored Cross-Site Scripting (XSS) vulnerability has been identified in OpenText ArcSight Enterprise Security Manager and ArcSight Platform. The vulnerability could be remotely exploited. | 2024-05-20 | 8.7 | CVE-2024-3482 security@opentext.com |
| OpenText--Dimensions RM | Privilege Escalation in OpenText Dimensions RM allows an authenticated user to escalate there privilege to the privilege of another user via HTTP Request | 2024-05-23 | 8.8 | CVE-2024-5201 security@opentext.com |
| OpenText--Dimensions RM | Arbitrary File Read in OpenText Dimensions RM allows authenticated users to read files stored on the server via webservices | 2024-05-23 | 7.7 | CVE-2024-5202 security@opentext.com |
| Oxygen Builder--Oxygen Builder | The Oxygen Builder plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.8.2 via post metadata. This is due to the plugin storing custom data in post metadata without an underscore prefix. This makes it possible for lower privileged users, such as contributors, to inject arbitrary PHP code via the WordPress user interface and gain elevated privileges. | 2024-05-23 | 8.8 | CVE-2024-4662 security@wordfence.com security@wordfence.com |
| PHPGurukul--Directory Management System | A vulnerability was found in PHPGurukul Directory Management System 1.0. It has been rated as critical. This issue affects some unknown processing of the file /admin/index.php. The manipulation of the argument username leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265211. | 2024-05-20 | 7.3 | CVE-2024-5135 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Prodys--Quantum Audio codec | Improper access control vulnerability in Prodys' Quantum Audio codec affecting versions 2.3.4t and below. This vulnerability could allow an unauthenticated user to bypass authentication entirely and execute arbitrary API requests against the web application. | 2024-05-23 | 9.8 | CVE-2024-5168 cve-coordination@incibe.es |
| QNAP Systems Inc.--QTS | A double free vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute arbitrary code via a network. We have already fixed the vulnerability in the following version: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later | 2024-05-21 | 7.2 | CVE-2024-27127 security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute code via a network. We have already fixed the vulnerability in the following version: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later | 2024-05-21 | 7.2 | CVE-2024-27130 security@qnapsecurity.com.tw |
| SolarWinds--SolarWinds Platform | The SolarWinds Platform was determined to be affected by a reflected cross-site scripting vulnerability affecting the web console. A high-privileged user and user interaction is required to exploit this vulnerability. | 2024-05-20 | 7.9 | CVE-2024-29000 psirt@solarwinds.com psirt@solarwinds.com |
| SourceCodester--Event Registration System | A vulnerability, which was classified as critical, was found in SourceCodester Event Registration System 1.0. This affects an unknown part of the file portal.php. The manipulation of the argument username/password leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265197 was assigned to this vulnerability. | 2024-05-20 | 7.3 | CVE-2024-5117 cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Event Registration System | A vulnerability has been found in SourceCodester Event Registration System 1.0 and classified as critical. This vulnerability affects unknown code of the file /admin/login.php. The manipulation of the argument username/password leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-265198 is the identifier assigned to this vulnerability. | 2024-05-20 | 7.3 | CVE-2024-5118 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Event Registration System | A vulnerability was found in SourceCodester Event Registration System 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file /registrar/. The manipulation of the argument search leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-265202 is the identifier assigned to this vulnerability. | 2024-05-20 | 7.3 | CVE-2024-5122 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Online Examination System | A vulnerability, which was classified as critical, has been found in SourceCodester Online Examination System 1.0. Affected by this issue is some unknown functionality of the file save.php. The manipulation of the argument vote leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265196. | 2024-05-20 | 7.3 | CVE-2024-5116 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| ZkTeco--ZkTeco-based OEM devices with firmware ZAM170-NF-1.8.25-7354-Ver1.0.0, Standalone service v. 2.1.6-20200907 | An 'SQL Injection' vulnerability, due to improper neutralization of special elements used in SQL commands, exists in ZKTeco-based OEM devices. This vulnerability allows an attacker to, in some cases, impersonate another user or perform unauthorized actions. In other instances, it enables the attacker to access user data and system parameters from the database. This issue affects ZkTeco-based OEM devices (ZkTeco ProFace X, Smartec ST-FR043, Smartec ST-FR041ME and possibly others) with firmware ZAM170-NF-1.8.25-7354-Ver1.0.0 and possibly other, Standalone service v. 2.1.6-20200907 and possibly others. | 2024-05-21 | 7.5 | CVE-2023-3942 vulnerability@kaspersky.com |
| ZkTeco--ZkTeco-based OEM devices with firmware ZAM170-NF-1.8.25-7354-Ver1.0.0 | Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in ZkTeco-based OEM devices allows OS Command Injection. Since all the found command implementations are executed from the superuser, their impact is the maximum possible. This issue affects ZkTeco-based OEM devices (ZkTeco ProFace X, Smartec ST-FR043, Smartec ST-FR041ME and possibly others) with the ZAM170-NF-1.8.25-7354-Ver1.0.0 and possibly other. | 2024-05-21 | 10 | CVE-2023-3939 vulnerability@kaspersky.com |
| ZkTeco--ZkTeco-based OEM devices with firmware ZAM170-NF-1.8.25-7354-Ver1.0.0 | Relative Path Traversal vulnerability in ZkTeco-based OEM devices allows an attacker to write any file on the system with root privileges. This issue affects ZkTeco-based OEM devices (ZkTeco ProFace X, Smartec ST-FR043, Smartec ST-FR041ME and possibly others) with the ZAM170-NF-1.8.25-7354-Ver1.0.0 and possibly others. | 2024-05-21 | 10 | CVE-2023-3941 vulnerability@kaspersky.com |
| ZkTeco--ZkTeco-based OEM devices with firmware ZAM170-NF-1.8.25-7354-Ver1.0.0 | Stack-based Buffer Overflow vulnerability in ZkTeco-based OEM devices allows, in some cases, the execution of arbitrary code. Due to the lack of protection mechanisms such as stack canaries and PIE, it is possible to successfully execute code even under restrictive conditions. This issue affects ZkTeco-based OEM devices (ZkTeco ProFace X, Smartec ST-FR043, Smartec ST-FR041ME and possibly others) with firmware ZAM170-NF-1.8.25-7354-Ver1.0.0 and possibly others. | 2024-05-21 | 10 | CVE-2023-3943 vulnerability@kaspersky.com |
| ZkTeco--ZkTeco-based OEM devices with firmware ZAM170-NF-1.8.25-7354-Ver1.0.0 | Relative Path Traversal vulnerability in ZkTeco-based OEM devices allows an attacker to access any file on the system. This issue affects ZkTeco-based OEM devices (ZkTeco ProFace X, Smartec ST-FR043, Smartec ST-FR041ME and possibly others) with the ZAM170-NF-1.8.25-7354-Ver1.0.0 and possibly others. | 2024-05-21 | 7.5 | CVE-2023-3940 vulnerability@kaspersky.com |
| argoproj--argo-cd | Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. It has been discovered that an unprivileged pod in a different namespace on the same cluster could connect to the Redis server on port 6379. Despite having installed the latest version of the VPC CNI plugin on the EKS cluster, it requires manual enablement through configuration to enforce network policies. This raises concerns that many clients might unknowingly have open access to their Redis servers. This vulnerability could lead to Privilege Escalation to the level of cluster controller, or to information leakage, affecting anyone who does not have strict access controls on their Redis instance. This issue has been patched in version(s) 2.8.19, 2.9.15 and 2.10.10. | 2024-05-21 | 9 | CVE-2024-31989 security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| devitemsllc--ShopLentor WooCommerce Builder for Elementor & Gutenberg +12 Modules All in One Solution (formerly WooLentor) | The ShopLentor plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the ajax_dismiss function in all versions up to, and including, 2.8.8. This makes it possible for authenticated attackers, with contributor-level access and above, to set arbitrary WordPress options to "true". NOTE: This vulnerability can be exploited by attackers with subscriber- or customer-level access and above if (1) the WooCommerce plugin is deactivated or (2) access to the default WordPress admin dashboard is explicitly enabled for authenticated users. | 2024-05-21 | 7.1 | CVE-2024-4566 security@wordfence.com security@wordfence.com security@wordfence.com |
| dfir-iris--iris-evtx-module | IrisEVTXModule is an interface module for Evtx2Splunk and Iris in order to ingest Microsoft EVTX log files. The `iris-evtx-module` is a pipeline plugin of `iris-web` that processes EVTX files through IRIS web application. During the upload of an EVTX through this pipeline, the filename is not safely handled and may cause an Arbitrary File Write. This can lead to a remote code execution (RCE) when combined with a Server Side Template Injection (SSTI). This vulnerability has been patched in version 1.0.0. | 2024-05-23 | 8.8 | CVE-2024-34060 security-advisories@github.com security-advisories@github.com |
| dglingren--Media Library Assistant | The Media Library Assistant plugin for WordPress is vulnerable to SQL Injection via the plugin's shortcode(s) in all versions up to, and including, 3.15 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with contributor access or higher, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | 2024-05-22 | 8.8 | CVE-2024-3518 security@wordfence.com security@wordfence.com security@wordfence.com |
| emrevona--WP Fastest Cache | The WP Fastest Cache plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.2.6 via the specificDeleteCache function. This makes it possible for authenticated attackers to delete arbitrary files on the server, which can include wp-config.php files of the affected site or other sites in a shared hosting environment. | 2024-05-23 | 7.2 | CVE-2024-4347 security@wordfence.com security@wordfence.com security@wordfence.com |
| fastify--session | @fastify/session is a session plugin for fastify. Requires the @fastify/cookie plugin. When restoring the cookie from the session store, the `expires` field is overriden if the `maxAge` field was set. This means a cookie is never correctly detected as expired and thus expired sessions are not destroyed. This vulnerability has been patched 10.8.0. | 2024-05-21 | 7.4 | CVE-2024-35220 security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| hashthemes--Hash Form Drag & Drop Form Builder | The Hash Form - Drag & Drop Form Builder plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the 'file_upload_action' function in all versions up to, and including, 1.1.0. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. | 2024-05-23 | 9.8 | CVE-2024-5084 security@wordfence.com security@wordfence.com security@wordfence.com |
| hashthemes--Hash Form Drag & Drop Form Builder | The Hash Form - Drag & Drop Form Builder plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.1.0 via deserialization of untrusted input in the 'process_entry' function. This makes it possible for unauthenticated attackers to inject a PHP Object. No known POP chain is present in the vulnerable software. If a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code. | 2024-05-23 | 8.1 | CVE-2024-5085 security@wordfence.com security@wordfence.com security@wordfence.com |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381 | 2024-05-21 | 7.8 | CVE-2023-52752 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in gfs2_qd_dealloc In gfs2_put_super(), whether withdrawn or not, the quota should be cleaned up by gfs2_quota_cleanup(). Otherwise, struct gfs2_sbd will be freed before gfs2_qd_dealloc (rcu callback) has run for all gfs2_quota_data objects, resulting in use-after-free. Also, gfs2_destroy_threads() and gfs2_quota_cleanup() is already called by gfs2_make_fs_ro(), so in gfs2_put_super(), after calling gfs2_make_fs_ro(), there is no need to call them again. | 2024-05-21 | 7.8 | CVE-2023-52760 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix htt mlo-offset event locking The ath12k active pdevs are protected by RCU but the htt mlo-offset event handling code calling ath12k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. | 2024-05-21 | 7.8 | CVE-2023-52769 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: af_unix: fix use-after-free in unix_stream_read_actor() syzbot reported the following crash [1] After releasing unix socket lock, u->oob_skb can be changed by another thread. We must temporarily increase skb refcount to make sure this other thread will not free the skb under us. [1] BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297 CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:364 [inline] print_report+0xc4/0x620 mm/kasan/report.c:475 kasan_report+0xda/0x110 mm/kasan/report.c:588 unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866 unix_stream_recv_urg net/unix/af_unix.c:2587 [inline] unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666 unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0xe2/0x170 net/socket.c:1066 ____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803 ___sys_recvmsg+0x115/0x1a0 net/socket.c:2845 __sys_recvmsg+0x114/0x1e0 net/socket.c:2875 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7fc67492c559 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559 RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340 R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388 </TASK> Allocated by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:763 [inline] slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523 __alloc_skb+0x287/0x330 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331 sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] queue_oob net/unix/af_unix.c:2147 [inline] unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2584 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2638 __sys_sendmsg+0x117/0x1e0 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0x6b Freed by task 5295: kasan_save_stack+0x33/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1800 [inline] slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826 slab_free mm/slub.c:3809 [inline] kmem_cache_free+0xf8/0x340 mm/slub.c:3831 kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015 __kfree_skb net/core/skbuff.c:1073 [inline] consume_skb net/core/skbuff.c:1288 [inline] consume_skb+0xdf/0x170 net/core/skbuff.c:1282 queue_oob net/unix/af_unix.c:2178 [inline] u ---truncated--- | 2024-05-21 | 7.8 | CVE-2023-52772 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix possible out-of-bound read in ath12k_htt_pull_ppdu_stats() len is extracted from HTT message and could be an unexpected value in case errors happen, so add validation before using to avoid possible out-of-bound read in the following message iteration and parsing. The same issue also applies to ppdu_info->ppdu_stats.common.num_users, so validate it before using too. These are found during code review. Compile test only. | 2024-05-21 | 7.1 | CVE-2023-52827 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| n/a--VMware ESXi | The storage controllers on VMware ESXi, Workstation, and Fusion have out-of-bounds read/write vulnerability. A malicious actor with access to a virtual machine with storage controllers enabled may exploit this issue to create a denial of service condition or execute code on the hypervisor from a virtual machine in conjunction with other issues. | 2024-05-21 | 8.1 | CVE-2024-22273 security@vmware.com |
| n/a--VMware vCenter Server | The vCenter Server contains an authenticated remote code execution vulnerability. A malicious actor with administrative privileges on the vCenter appliance shell may exploit this issue to run arbitrary commands on the underlying operating system. | 2024-05-21 | 7.2 | CVE-2024-22274 security@vmware.com |
| n/a--n/a | Qlik Sense Enterprise for Windows before 14.187.4 allows a remote attacker to elevate their privilege due to improper validation. The attacker can elevate their privilege to the internal system role, which allows them to execute commands on the server. This affects February 2024 Patch 3 (14.173.3 through 14.173.7), November 2023 Patch 8 (14.159.4 through 14.159.13), August 2023 Patch 13 (14.139.3 through 14.139.20), May 2023 Patch 15 (14.129.3 through 14.129.22), February 2023 Patch 13 (14.113.1 through 14.113.18), November 2022 Patch 13 (14.97.2 through 14.97.18), August 2022 Patch 16 (14.78.3 through 14.78.23), and May 2022 Patch 17 (14.67.7 through 14.67.31). This has been fixed in May 2024 (14.187.4), February 2024 Patch 4 (14.173.8), November 2023 Patch 9 (14.159.14), August 2023 Patch 14 (14.139.21), May 2023 Patch 16 (14.129.23), February 2023 Patch 14 (14.113.19), November 2022 Patch 14 (14.97.19), August 2022 Patch 17 (14.78.25), and May 2022 Patch 18 (14.67.34). | 2024-05-22 | 8.8 | CVE-2024-36077 cve@mitre.org |
| n/a--n/a | In RTI Connext Professional 5.3.1 through 6.1.0 before 6.1.1, a buffer overflow in XML parsing from Routing Service, Recording Service, Queuing Service, and Cloud Discovery Service allows attackers to execute code with the affected service's privileges, compromise the service's integrity, leak sensitive information, or crash the service. These attacks could be done via a remote malicious RTPS message; a compromised call with malicious parameters to the RTI_RoutingService_new, rti::recording::Service, RTI_QueuingService_new, or RTI_CDS_Service_new public APIs; or a compromised local file system containing a malicious XML file. | 2024-05-21 | 7.3 | CVE-2024-25724 cve@mitre.org |
| nextscripts--NextScripts: Social Networks Auto-Poster | The NextScripts: Social Networks Auto-Poster plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 4.4.3 via the 'nxs_getExpSettings' function. This makes it possible for authenticated attackers, with subscriber access and above, to extract sensitive data including social network API keys and secrets. | 2024-05-22 | 8.5 | CVE-2024-2088 security@wordfence.com security@wordfence.com security@wordfence.com |
| opf--openproject | OpenProject is the leading open source project management software. OpenProject utilizes `tablesorter` inside of the Cost Report feature. This dependency, when misconfigured, can lead to Stored XSS via `{icon}` substitution in table header values. This attack requires the permissions "Edit work packages" as well as "Add attachments". A project admin could attempt to escalate their privileges by sending this XSS to a System Admin. Otherwise, if a full System Admin is required, then this attack is significantly less impactful. By utilizing a ticket's attachment, you can store javascript in the application itself and bypass the application's CSP policy to achieve Stored XSS. This vulnerability has been patched in version(s) 14.1.0, 14.0.2 and 13.4.2. | 2024-05-23 | 7.6 | CVE-2024-35224 security-advisories@github.com security-advisories@github.com |
| piotnetdotcom--Piotnet Addons For Elementor | The Piotnet Addons For Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple widgets in all versions up to, and including, 2.4.28 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 7.2 | CVE-2024-4262 security@wordfence.com security@wordfence.com |
| requarks--wiki | Wiki.js is al wiki app built on Node.js. Client side template injection was discovered, that could allow an attacker to inject malicious JavaScript into the content section of pages that would execute once a victim loads the page that contains the payload. This was possible through the injection of a invalid HTML tag with a template injection payload on the next line. This vulnerability is fixed in 2.5.303. | 2024-05-20 | 7.1 | CVE-2024-34710 security-advisories@github.com security-advisories@github.com |
| strategy11team--Business Directory Plugin Easy Listing Directories for WordPress | The Business Directory Plugin - Easy Listing Directories for WordPress plugin for WordPress is vulnerable to time-based SQL Injection via the 'listingfields' parameter in all versions up to, and including, 6.4.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | 2024-05-22 | 9.8 | CVE-2024-4443 security@wordfence.com security@wordfence.com security@wordfence.com |
| sudar--Email Log | The Email Log plugin for WordPress is vulnerable to Unauthenticated Hook Injection in all versions up to, and including, 2.4.8 via the check_nonce function. This makes it possible for unauthenticated attackers to execute actions with hooks in WordPress under certain circumstances. The action the attacker wishes to execute needs to have a nonce check, and the nonce needs to be known to the attacker. Furthermore, the absence of a capability check is a requirement. | 2024-05-24 | 8.1 | CVE-2024-0867 security@wordfence.com security@wordfence.com security@wordfence.com |
| techjewel--Contact Form Plugin by Fluent Forms for Quiz, Survey, and Drag & Drop WP Form Builder | The Contact Form Plugin by Fluent Forms for Quiz, Survey, and Drag & Drop WP Form Builder plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 5.1.15 via deserialization of untrusted input in the extractDynamicValues function. This makes it possible for authenticated attackers, with contributor-level access and above, to inject a PHP Object. If a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code. Successful exploitation requires the attacker to have "View Form" and "Manage Form" permissions, which must be explicitly set by an administrator. However, this requirement can be bypassed when this vulnerability is chained with CVE-2024-2771. | 2024-05-22 | 7.5 | CVE-2024-4157 security@wordfence.com security@wordfence.com |
| unitecms--Unlimited Elements For Elementor (Free Widgets, Addons, Templates) | The Unlimited Elements For Elementor (Free Widgets, Addons, Templates) plugin for WordPress is vulnerable to SQL Injection via the 'data[post_ids][0]' parameter in all versions up to, and including, 1.5.107 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | 2024-05-23 | 8.8 | CVE-2024-4779 security@wordfence.com security@wordfence.com |
| wordpresschef--Salon booking system | The Salon booking system plugin for WordPress is vulnerable to arbitrary file deletion in all versions up to, and including, 9.8. This is due to the plugin not properly validating the path of an uploaded file prior to deleting it. This makes it possible for unauthenticated attackers to delete arbitrary files, including the wp-config.php file, which can make site takeover and remote code execution possible. | 2024-05-21 | 9.1 | CVE-2024-4442 security@wordfence.com security@wordfence.com security@wordfence.com |
| wpfeedback--Visual Website Collaboration, Feedback & Project Management Atarim | The Visual Website Collaboration, Feedback & Project Management - Atarim plugin for WordPress is vulnerable to unauthorized access in all versions up to, and including, 3.22.6. This is due to the use of hardcoded credentials to authenticate all the incoming API requests. This makes it possible for unauthenticated attackers to modify plugin settings, delete posts, modify post titles, and upload images. | 2024-05-23 | 7.5 | CVE-2024-2038 security@wordfence.com security@wordfence.com security@wordfence.com |
| wpzoom--WPZOOM Addons for Elementor (Templates, Widgets) | The WPZOOM Addons for Elementor (Templates, Widgets) plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.1.37 via the 'grid_style' parameter. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other "safe" file types can be uploaded and included. | 2024-05-22 | 9.8 | CVE-2024-5147 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| xpro--140+ Widgets | Best Addons For Elementor FREE | The 140+ Widgets | Best Addons For Elementor - FREE for WordPress is vulnerable to PHP Object Injection in versions up to, and including, 1.4.3.1 via deserialization of untrusted input in the 'export_content' function. This allows authenticated attackers, with contributor-level permissions and above, to inject a PHP Object. No POP chain is present in the vulnerable plugin. If a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code. Thanks, Francesco | 2024-05-23 | 8 | CVE-2024-4471 security@wordfence.com security@wordfence.com security@wordfence.com |
| yithemes--YITH WooCommerce Ajax Search | The YITH WooCommerce Ajax Search plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'item' parameter in versions up to, and including, 2.4.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 7.2 | CVE-2024-4455 security@wordfence.com security@wordfence.com security@wordfence.com |
Medium Vulnerabilities
| Primary Vendor -- Product | Description | Published | CVSS Score | Source & Patch Info |
|---|---|---|---|---|
| Arris--VAP2500 | A vulnerability was found in Arris VAP2500 08.50. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /assoc_table.php. The manipulation of the argument id leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265831. | 2024-05-22 | 4.7 | CVE-2024-5194 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Arris--VAP2500 | A vulnerability was found in Arris VAP2500 08.50. It has been rated as critical. Affected by this issue is some unknown functionality of the file /diag_s.php. The manipulation of the argument customer_info leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265832. | 2024-05-22 | 4.7 | CVE-2024-5195 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Arris--VAP2500 | A vulnerability classified as critical has been found in Arris VAP2500 08.50. This affects an unknown part of the file /tools_command.php. The manipulation of the argument cmb_header/txt_command leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265833 was assigned to this vulnerability. | 2024-05-22 | 4.7 | CVE-2024-5196 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Byron--gitoxide | gitoxide is a pure Rust implementation of Git. On Windows, fetching refs that clash with legacy device names reads from the devices, and checking out paths that clash with such names writes arbitrary data to the devices. This allows a repository, when cloned, to cause indefinite blocking or the production of arbitrary message that appear to have come from the application, and potentially other harmful effects under limited circumstances. If Windows is not used, or untrusted repositories are not cloned or otherwise used, then there is no impact. A minor degradation in availability may also be possible, such as with a very large file named `CON`, though the user could interrupt the application. | 2024-05-23 | 5.4 | CVE-2024-35197 security-advisories@github.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability, which was classified as critical, has been found in Campcodes Complete Web-Based School Management System 1.0. This issue affects some unknown processing of the file /view/student_payment_details2.php. The manipulation of the argument index leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265097 was assigned to this vulnerability. | 2024-05-20 | 6.3 | CVE-2024-5107 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability, which was classified as critical, was found in Campcodes Complete Web-Based School Management System 1.0. Affected is an unknown function of the file /view/student_payment_details4.php. The manipulation of the argument index leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-265098 is the identifier assigned to this vulnerability. | 2024-05-20 | 6.3 | CVE-2024-5108 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability has been found in Campcodes Complete Web-Based School Management System 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /view/student_payment_history.php. The manipulation of the argument index leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265099. | 2024-05-20 | 6.3 | CVE-2024-5109 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0 and classified as critical. Affected by this issue is some unknown functionality of the file /view/student_payment_invoice.php. The manipulation of the argument index leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265100. | 2024-05-20 | 6.3 | CVE-2024-5110 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0. It has been classified as critical. This affects an unknown part of the file /view/student_payment_invoice1.php. The manipulation of the argument date leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265101 was assigned to this vulnerability. | 2024-05-20 | 6.3 | CVE-2024-5111 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /view/student_profile.php. The manipulation of the argument std_index leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-265102 is the identifier assigned to this vulnerability. | 2024-05-20 | 6.3 | CVE-2024-5112 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0. It has been rated as critical. This issue affects some unknown processing of the file /view/student_profile1.php. The manipulation of the argument std_index leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265103. | 2024-05-20 | 6.3 | CVE-2024-5113 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability classified as critical has been found in Campcodes Complete Web-Based School Management System 1.0. Affected is an unknown function of the file /view/teacher_attendance_history1.php. The manipulation of the argument index leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265104. | 2024-05-20 | 6.3 | CVE-2024-5114 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability classified as critical was found in Campcodes Complete Web-Based School Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /view/teacher_profile.php. The manipulation of the argument index leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265105 was assigned to this vulnerability. | 2024-05-20 | 6.3 | CVE-2024-5115 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0 and classified as critical. Affected by this issue is some unknown functionality of the file /view/teacher_salary_details.php. The manipulation of the argument index leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-265982 is the identifier assigned to this vulnerability. | 2024-05-23 | 6.3 | CVE-2024-5231 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0. It has been classified as critical. This affects an unknown part of the file /view/teacher_salary_details2.php. The manipulation of the argument index leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265983. | 2024-05-23 | 6.3 | CVE-2024-5232 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /view/teacher_salary_details3.php. The manipulation of the argument index leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265984. | 2024-05-23 | 6.3 | CVE-2024-5233 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0. It has been rated as critical. This issue affects some unknown processing of the file /view/teacher_salary_history1.php. The manipulation of the argument index leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265985 was assigned to this vulnerability. | 2024-05-23 | 6.3 | CVE-2024-5234 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability classified as critical has been found in Campcodes Complete Web-Based School Management System 1.0. Affected is an unknown function of the file /view/teacher_salary_invoice.php. The manipulation of the argument teacher_id leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-265986 is the identifier assigned to this vulnerability. | 2024-05-23 | 6.3 | CVE-2024-5235 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability classified as critical was found in Campcodes Complete Web-Based School Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /view/teacher_salary_invoice1.php. The manipulation of the argument date leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265987. | 2024-05-23 | 6.3 | CVE-2024-5236 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability, which was classified as critical, has been found in Campcodes Complete Web-Based School Management System 1.0. Affected by this issue is some unknown functionality of the file /view/timetable_grade_wise.php. The manipulation of the argument grade leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265988. | 2024-05-23 | 6.3 | CVE-2024-5237 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability, which was classified as critical, was found in Campcodes Complete Web-Based School Management System 1.0. This affects an unknown part of the file /view/timetable_insert_form.php. The manipulation of the argument grade leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265989 was assigned to this vulnerability. | 2024-05-23 | 6.3 | CVE-2024-5238 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability has been found in Campcodes Complete Web-Based School Management System 1.0 and classified as critical. This vulnerability affects unknown code of the file /view/timetable_update_form.php. The manipulation of the argument grade leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-265990 is the identifier assigned to this vulnerability. | 2024-05-23 | 6.3 | CVE-2024-5239 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Campcodes--Complete Web-Based School Management System | A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0 and classified as critical. This issue affects some unknown processing of the file /view/unread_msg.php. The manipulation of the argument my_index leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265991. | 2024-05-23 | 6.3 | CVE-2024-5240 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Cisco--Cisco Adaptive Security Appliance (ASA) Software | A vulnerability in the activation of an access control list (ACL) on Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to a logic error that occurs when an ACL changes from inactive to active in the running configuration of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. The reverse condition is also true-traffic that should be permitted could be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. Note: This vulnerability applies to both IPv4 and IPv6 traffic as well as dual-stack ACL configurations in which both IPv4 and IPv6 ACLs are configured on an interface. | 2024-05-22 | 5.8 | CVE-2024-20293 ykramarz@cisco.com |
| Cisco--Cisco Adaptive Security Appliance (ASA) Software | A vulnerability in the implementation of SAML 2.0 single sign-on (SSO) for remote access VPN services in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to successfully establish a VPN session on an affected device. This vulnerability is due to improper separation of authorization domains when using SAML authentication. An attacker could exploit this vulnerability by using valid credentials to successfully authenticate using their designated connection profile (tunnel group), intercepting the SAML SSO token that is sent back from the Cisco ASA device, and then submitting the same SAML SSO token to a different tunnel group for authentication. A successful exploit could allow the attacker to establish a remote access VPN session using a connection profile that they are not authorized to use and connect to secured networks behind the affected device that they are not authorized to access. For successful exploitation, the attacker must have valid remote access VPN user credentials. | 2024-05-22 | 5 | CVE-2024-20355 ykramarz@cisco.com |
| Cisco--Cisco Firepower Management Center | A vulnerability in the Object Groups for Access Control Lists (ACLs) feature of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass configured access controls on managed devices that are running Cisco Firepower Threat Defense (FTD) Software. This vulnerability is due to the incorrect deployment of the Object Groups for ACLs feature from Cisco FMC Software to managed FTD devices in high-availability setups. After an affected device is rebooted following Object Groups for ACLs deployment, an attacker can exploit this vulnerability by sending traffic through the affected device. A successful exploit could allow the attacker to bypass configured access controls and successfully send traffic to devices that are expected to be protected by the affected device. | 2024-05-22 | 5.8 | CVE-2024-20361 ykramarz@cisco.com |
| Cisco--Cisco Firepower Threat Defense Software | A vulnerability in the file policy feature that is used to inspect encrypted archive files of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured file policy to block an encrypted archive file. This vulnerability exists because of a logic error when a specific class of encrypted archive files is inspected. An attacker could exploit this vulnerability by sending a crafted, encrypted archive file through the affected device. A successful exploit could allow the attacker to send an encrypted archive file, which could contain malware and should have been blocked and dropped at the Cisco FTD device. | 2024-05-22 | 5.8 | CVE-2024-20261 ykramarz@cisco.com |
| Cisco--Cisco Firepower Threat Defense Software | Multiple Cisco products are affected by a vulnerability in the Snort Intrusion Prevention System (IPS) rule engine that could allow an unauthenticated, remote attacker to bypass the configured rules on an affected system. This vulnerability is due to incorrect HTTP packet handling. An attacker could exploit this vulnerability by sending crafted HTTP packets through an affected device. A successful exploit could allow the attacker to bypass configured IPS rules and allow uninspected traffic onto the network. | 2024-05-22 | 5.8 | CVE-2024-20363 ykramarz@cisco.com |
| Dell--Dell BSAFE Crypto-C Micro Edition | Dell BSAFE Crypto-C Micro Edition, versions before 4.1.5, and Dell BSAFE Micro Edition Suite, versions before 4.6, contain an Observable Timing Discrepancy Vulnerability. | 2024-05-22 | 5.1 | CVE-2020-35165 security_alert@emc.com |
| Eclipse Foundation--Eclipse Ditto | In Eclipse Ditto versions 3.0.0 to 3.5.5, the user input of several input fields of the Eclipse Ditto Explorer User Interface https://eclipse.dev/ditto/user-interface.html was not properly neutralized and thus vulnerable to both Reflected and Stored XSS (Cross Site Scripting). Several inputs were not persisted at the backend of Eclipse Ditto, but only in local browser storage to save settings of "environments" of the UI and e.g. the last performed "search queries", resulting in a "Reflected XSS" vulnerability. However, several other inputs were persisted at the backend of Eclipse Ditto, leading to a "Stored XSS" vulnerability. Those mean that authenticated and authorized users at Eclipse Ditto can persist Things in Ditto which can - when being displayed by other users also being authorized to see those Things in the Eclipse Ditto UI - cause scripts to be executed in the browser of other users. | 2024-05-23 | 6.5 | CVE-2024-5165 emo@eclipse.org emo@eclipse.org emo@eclipse.org emo@eclipse.org emo@eclipse.org emo@eclipse.org emo@eclipse.org emo@eclipse.org |
| EnvaySoft--FleetCart | A vulnerability has been found in EnvaySoft FleetCart up to 4.1.1 and classified as problematic. Affected by this vulnerability is an unknown functionality. The manipulation of the argument razorpayKeyId leads to information disclosure. The attack can be launched remotely. It is recommended to upgrade the affected component. The identifier VDB-265981 was assigned to this vulnerability. | 2024-05-23 | 5.3 | CVE-2024-5230 cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| GitLab--GitLab | An issue has been discovered in GitLab CE/EE affecting all versions before 16.10.6, version 16.11 before 16.11.3, and 17.0 before 17.0.1. A runner registered with a crafted description has the potential to disrupt the loading of targeted GitLab web resources. | 2024-05-23 | 6.5 | CVE-2024-2874 cve@gitlab.com cve@gitlab.com |
| GitLab--GitLab | A CSRF vulnerability exists within GitLab CE/EE from versions 13.11 before 16.10.6, from 16.11 before 16.11.3, from 17.0 before 17.0.1. By leveraging this vulnerability, an attacker could exfiltrate anti-CSRF tokens via the Kubernetes Agent Server (KAS). | 2024-05-23 | 5.4 | CVE-2023-7045 cve@gitlab.com cve@gitlab.com |
| GitLab--GitLab | A Denial of Service (DoS) condition has been discovered in GitLab CE/EE affecting all versions before 16.10.6, version 16.11 before 16.11.3, and 17.0 before 17.0.1. It is possible for an attacker to cause a denial of service using a crafted wiki page. | 2024-05-23 | 4.3 | CVE-2023-6502 cve@gitlab.com cve@gitlab.com |
| GitLab--GitLab | A denial of service (DoS) condition was discovered in GitLab CE/EE affecting all versions from 13.2.4 before 16.10.6, 16.11 before 16.11.3, and 17.0 before 17.0.1. By leveraging this vulnerability an attacker could create a DoS condition by sending crafted API calls. | 2024-05-23 | 4.3 | CVE-2024-1947 cve@gitlab.com cve@gitlab.com |
| GitLab--GitLab | An authorization vulnerability exists within GitLab from versions 16.10 before 16.10.6, 16.11 before 16.11.3, and 17.0 before 17.0.1 where an authenticated attacker could utilize a crafted naming convention to bypass pipeline authorization logic. | 2024-05-23 | 4.4 | CVE-2024-5258 cve@gitlab.com |
| GitLab--GitLab | An issue has been discovered in GitLab CE/EE affecting all versions starting from 11.11 prior to 16.10.6, starting from 16.11 prior to 16.11.3, and starting from 17.0 prior to 17.0.1. A Guest user can view dependency lists of private projects through job artifacts. | 2024-05-24 | 4 | CVE-2024-5318 cve@gitlab.com cve@gitlab.com |
| Google Cloud--Looker | An Insecure Direct Object Reference in Google Cloud's Looker allowed metadata exposure across authenticated Looker users sharing the same LookML model. | 2024-05-22 | 6.5 | CVE-2024-5166 cve-coordination@google.com |
| Huashi--Private Cloud CDN Live Streaming Acceleration Server | A vulnerability was found in Huashi Private Cloud CDN Live Streaming Acceleration Server up to 20240520. It has been classified as critical. Affected is an unknown function of the file /manager/ipconfig_new.php. The manipulation of the argument dev leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265992. | 2024-05-23 | 4.7 | CVE-2024-5241 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| IBM--App Connect Enterprise | IBM App Connect Enterprise 11.0.0.1 through 11.0.0.25 and 12.0.1.0 through 12.0.12.0 integration nodes could allow an authenticated user to cause a denial of service due to an uncaught exception. IBM X-Force ID: 289647. | 2024-05-22 | 6.5 | CVE-2024-31904 psirt@us.ibm.com psirt@us.ibm.com |
| IBM--App Connect Enterprise | IBM App Connect Enterprise 12.0.1.0 through 12.0.12.1 could allow an authenticated user to obtain sensitive calendar information using an expired access token. IBM X-Force ID: 288174. | 2024-05-22 | 4.3 | CVE-2024-31893 psirt@us.ibm.com psirt@us.ibm.com |
| IBM--App Connect Enterprise | IBM App Connect Enterprise 12.0.1.0 through 12.0.12.1 could allow an authenticated user to obtain sensitive user information using an expired access token. IBM X-Force ID: 288175. | 2024-05-22 | 4.3 | CVE-2024-31894 psirt@us.ibm.com psirt@us.ibm.com |
| IBM--App Connect Enterprise | IBM App Connect Enterprise 12.0.1.0 through 12.0.12.1 could allow an authenticated user to obtain sensitive user information using an expired access token. IBM X-Force ID: 288176. | 2024-05-22 | 4.3 | CVE-2024-31895 psirt@us.ibm.com psirt@us.ibm.com |
| IBM--Security Guardium | IBM Security Guardium 11.4, 11.5, and 12.0 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 271525. | 2024-05-24 | 5.4 | CVE-2023-47710 psirt@us.ibm.com psirt@us.ibm.com |
| Internet Computer--ic-stable-structures | When storing unbounded types in a BTreeMap, a node is represented as a linked list of "memory chunks". It was discovered recently that when we deallocate a node, in some cases only the first memory chunk is deallocated, and the rest of the memory chunks remain (incorrectly) allocated, causing a memory leak. In the worst case, depending on how a canister uses the BTreeMap, an adversary could interact with the canister through its API and trigger interactions with the map that keep consuming memory due to the memory leak. This could potentially lead to using an excessive amount of memory, or even running out of memory. This issue has been fixed in #212 https://github.com/dfinity/stable-structures/pull/212 by changing the logic for deallocating nodes to ensure that all of a node's memory chunks are deallocated and users are asked to upgrade to version 0.6.4.. Tests have been added to prevent regressions of this nature moving forward. Note: Users of stable-structure < 0.6.0 are not affected. Users who are not storing unbounded types in BTreeMap are not affected and do not need to upgrade. Otherwise, an upgrade to version 0.6.4 is necessary. | 2024-05-21 | 5.9 | CVE-2024-4435 6b35d637-e00f-4228-858c-b20ad6e1d07b 6b35d637-e00f-4228-858c-b20ad6e1d07b 6b35d637-e00f-4228-858c-b20ad6e1d07b |
| LayerSlider--LayerSlider | The LayerSlider plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's ls_search_form shortcode in version 7.11.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-4575 security@wordfence.com security@wordfence.com |
| ManageEngine--ADAudit Plus | Zoho ManageEngine ADAudit Plus versions below 7271 allows SQL Injection in lockout history option. Note: Non-admin users cannot exploit this vulnerability. | 2024-05-22 | 4.7 | CVE-2024-21791 0fc0942c-577d-436f-ae8e-945763c79b02 |
| MemberPress--Memberpress | The Memberpress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'arglist' parameter in all versions up to, and including, 1.11.29 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-5025 security@wordfence.com security@wordfence.com |
| PHP Server Monitor--PHP Server Monitor | PHP Server Monitor, version 3.2.0, is vulnerable to an XSS via the /phpservermon-3.2.0/vendor/phpmailer/phpmailer/test_script/index.php page in all visible parameters. An attacker could create a specially crafted URL, send it to a victim and retrieve their session details. | 2024-05-24 | 6.3 | CVE-2024-5312 cve-coordination@incibe.es |
| Progress Software Corporation--MOVEit Automation | The Progress MOVEit Automation configuration export function prior to 2024.0.0 uses a cryptographic method with insufficient bit length. | 2024-05-22 | 6.1 | CVE-2024-4563 security@progress.com security@progress.com |
| QNAP Systems Inc.--QTS | An incorrect permission assignment for critical resource vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to read or modify the resource via a network. We have already fixed the vulnerability in the following version: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later | 2024-05-21 | 6.4 | CVE-2024-21902 security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute code via a network. We have already fixed the vulnerability in the following version: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later | 2024-05-21 | 6.4 | CVE-2024-27128 security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute code via a network. We have already fixed the vulnerability in the following version: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later | 2024-05-21 | 6.4 | CVE-2024-27129 security@qnapsecurity.com.tw |
| Ritlabs--TinyWeb Server | A vulnerability was found in Ritlabs TinyWeb Server 1.94. It has been classified as problematic. Affected is an unknown function of the component Request Handler. The manipulation with the input %0D%0A leads to crlf injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-265830 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | 2024-05-22 | 5.3 | CVE-2024-5193 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Ruijie--RG-UAC | A vulnerability has been found in Ruijie RG-UAC up to 20240516 and classified as critical. This vulnerability affects the function addVlan of the file /view/networkConfig/vlan/vlan_add_commit.php. The manipulation of the argument phyport leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-266242 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | 2024-05-25 | 4.7 | CVE-2024-5336 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Ruijie--RG-UAC | A vulnerability was found in Ruijie RG-UAC up to 20240516 and classified as critical. This issue affects some unknown processing of the file /view/systemConfig/sys_user/user_commit.php. The manipulation of the argument email2/user_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-266243. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | 2024-05-25 | 4.7 | CVE-2024-5337 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Ruijie--RG-UAC | A vulnerability was found in Ruijie RG-UAC up to 20240516. It has been classified as critical. Affected is an unknown function of the file /view/vpn/autovpn/online.php. The manipulation of the argument peernode leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-266244. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | 2024-05-25 | 4.7 | CVE-2024-5338 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Ruijie--RG-UAC | A vulnerability was found in Ruijie RG-UAC up to 20240516. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /view/vpn/autovpn/online_check.php. The manipulation of the argument peernode leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-266245 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | 2024-05-25 | 4.7 | CVE-2024-5339 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Ruijie--RG-UAC | A vulnerability was found in Ruijie RG-UAC up to 20240516. It has been rated as critical. Affected by this issue is some unknown functionality of the file /view/vpn/autovpn/sub_commit.php. The manipulation of the argument key leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-266246 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | 2024-05-25 | 4.7 | CVE-2024-5340 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SevenSpark--UberMenu | The UberMenu plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's ubermenu-col, ubermenu_mobile_close_button, ubermenu_toggle, ubermenu-search shortcodes in all versions up to, and including, 3.8.2 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-4710 security@wordfence.com security@wordfence.com |
| SourceCodester--Electricity Consumption Monitoring Tool | A vulnerability was found in SourceCodester Electricity Consumption Monitoring Tool 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /endpoint/delete-bill.php. The manipulation of the argument bill leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-265210 is the identifier assigned to this vulnerability. | 2024-05-20 | 6.3 | CVE-2024-5134 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Event Registration System | A vulnerability was found in SourceCodester Event Registration System 1.0 and classified as critical. This issue affects some unknown processing of the file /classes/Master.php?f=load_registration. The manipulation of the argument last_id/event_id leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265199. | 2024-05-20 | 6.3 | CVE-2024-5119 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Event Registration System | A vulnerability was found in SourceCodester Event Registration System 1.0. It has been classified as critical. Affected is an unknown function of the file /registrar/?page=registration. The manipulation of the argument e leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265200. | 2024-05-20 | 6.3 | CVE-2024-5120 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Event Registration System | A vulnerability classified as problematic has been found in SourceCodester Event Registration System 1.0. This affects an unknown part of the file /registrar/. The manipulation of the argument searchbar leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265203. | 2024-05-20 | 4.3 | CVE-2024-5123 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Vehicle Management System | A vulnerability was found in SourceCodester Vehicle Management System up to 1.0 and classified as critical. This issue affects some unknown processing of the file /newdriver.php of the component HTTP POST Request Handler. The manipulation of the argument file leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265289 was assigned to this vulnerability. | 2024-05-20 | 6.3 | CVE-2024-5145 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Thales--Luna EFT | Network Transfer with AES KHT in Thales Luna EFT 2.1 and above allows a user with administrative console access to access backups taken via offline analysis | 2024-05-23 | 5.9 | CVE-2024-5264 psirt@thalesgroup.com |
| ZkTeco--ZkTeco-based OEM devices with firmware ZAM170-NF-1.8.25-7354-Ver1.0.0 | Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in ZkTeco-based OEM devices allows an attacker to authenticate under any user from the device database. This issue affects ZkTeco-based OEM devices (ZkTeco ProFace X, Smartec ST-FR043, Smartec ST-FR041ME and possibly others) with the ZAM170-NF-1.8.25-7354-Ver1.0.0 and possibly others. | 2024-05-21 | 4.6 | CVE-2023-3938 vulnerability@kaspersky.com |
| Zyxel--DX3300-T1 firmware | The buffer overflow vulnerability in the DX3300-T1 firmware version V5.50(ABVY.4)C0 could allow an authenticated local attacker to cause denial of service (DoS) conditions by executing the CLI command with crafted strings on an affected device. | 2024-05-21 | 5.5 | CVE-2024-0816 security@zyxel.com.tw |
| Zyxel--V5.50(ABPM.8)C0 firmware | The buffer overflow vulnerability in the CGI program of the VMG3625-T50B firmware version V5.50(ABPM.8)C0 could allow an authenticated remote attacker to cause denial of service (DoS) conditions by sending a crafted HTTP request to a vulnerable device. | 2024-05-21 | 6.5 | CVE-2023-37929 security@zyxel.com.tw |
| anji-plus--AJ-Report | A vulnerability was found in anji-plus AJ-Report up to 1.4.1. It has been classified as critical. Affected is the function pageList of the file /pageList. The manipulation of the argument p leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-266262 is the identifier assigned to this vulnerability. | 2024-05-25 | 6.3 | CVE-2024-5350 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| aquasecurity--trivy | Trivy is a security scanner. Prior to 0.51.2, if a malicious actor is able to trigger Trivy to scan container images from a crafted malicious registry, it could result in the leakage of credentials for legitimate registries such as AWS Elastic Container Registry (ECR), Google Cloud Artifact/Container Registry, or Azure Container Registry (ACR). These tokens can then be used to push/pull images from those registries to which the identity/user running Trivy has access. Systems are not affected if the default credential provider chain is unable to obtain valid credentials. This vulnerability only applies when scanning container images directly from a registry. This vulnerability is fixed in 0.51.2. | 2024-05-20 | 5.5 | CVE-2024-35192 security-advisories@github.com security-advisories@github.com |
| aruphash--Elegant Addons for elementor | The Elegant Addons for elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's widgets in all versions up to, and including, 1.0.8 due to insufficient input sanitization and output escaping on user supplied tag attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-3066 security@wordfence.com security@wordfence.com |
| aruphash--Elegant Addons for elementor | The Elegant Addons for elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Switcher, Slider, and Iconbox widgets in all versions up to, and including, 1.0.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-5092 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| averta--Master Slider Responsive Touch Slider | The Master Slider - Responsive Touch Slider plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'ms_slide_info' shortcode in all versions up to, and including, 3.9.9 due to insufficient input sanitization and output escaping on user supplied 'tag_name' attribute. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-4470 security@wordfence.com security@wordfence.com security@wordfence.com |
| baden03--Print-O-Matic | The Print-O-Matic plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'print-me' shortcode in all versions up to, and including, 2.1.10 due to insufficient input sanitization and output escaping on user supplied attributes such as 'tag'. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-3671 security@wordfence.com security@wordfence.com |
| baden03--jQuery T(-) Countdown Widget | The jQuery T(-) Countdown Widget plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's tminus shortcode in all versions up to, and including, 2.3.25 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-4783 security@wordfence.com security@wordfence.com |
| bastho--Event post | The Event post plugin for WordPress is vulnerable to unauthorized bulk metadata update due to a missing capability check on the save_bulkdatas function in all versions up to, and including, 5.9.4. This makes it possible for authenticated attackers, with subscriber access or higher, to update post_meta_data. | 2024-05-24 | 4.3 | CVE-2024-1376 security@wordfence.com security@wordfence.com |
| bdthemes--Element Pack Elementor Addons (Header Footer, Template Library, Dynamic Grid & Carousel, Remote Arrows) | The Element Pack Elementor Addons (Header Footer, Template Library, Dynamic Grid & Carousel, Remote Arrows) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the custom_attributes value in widgets in all versions up to, and including, 5.6.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-3926 security@wordfence.com security@wordfence.com security@wordfence.com |
| bdthemes--Element Pack Elementor Addons (Header Footer, Template Library, Dynamic Grid & Carousel, Remote Arrows) | The Element Pack Elementor Addons (Header Footer, Template Library, Dynamic Grid & Carousel, Remote Arrows) plugin for WordPress is vulnerable to Form Submission Admin Email Bypass in all versions up to, and including, 5.6.3. This is due to the plugin not properly checking for all variations of an administrators emails. This makes it possible for unauthenticated attackers to bypass the restriction using a +value when submitting the contact form. | 2024-05-22 | 5.3 | CVE-2024-3927 security@wordfence.com security@wordfence.com security@wordfence.com |
| bdthemes--Prime Slider Addons For Elementor (Revolution of a slider, Hero Slider, Ecommerce Slider) | The Prime Slider - Addons For Elementor (Revolution of a slider, Hero Slider, Ecommerce Slider) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Pagepiling widget in all versions up to, and including, 3.14.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-3997 security@wordfence.com security@wordfence.com |
| brainstormforce--Custom Fonts Host Your Fonts Locally | The Custom Fonts - Host Your Fonts Locally plugin for WordPress is vulnerable to Stored Cross-Site Scripting via svg file upload in all versions up to, and including, 2.1.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with author level or higher, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-1332 security@wordfence.com security@wordfence.com |
| brainstormforce--Elementor Header & Footer Builder | The Elementor Header & Footer Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the size attribute in all versions up to, and including, 1.6.26 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor access or higher, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-2618 security@wordfence.com security@wordfence.com security@wordfence.com |
| brainstormforce--Spectra WordPress Gutenberg Blocks | The Spectra - WordPress Gutenberg Blocks plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Testimonial block in all versions up to, and including, 2.12.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-1814 security@wordfence.com security@wordfence.com |
| brainstormforce--Spectra WordPress Gutenberg Blocks | The Spectra - WordPress Gutenberg Blocks plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Image Gallery block in all versions up to, and including, 2.12.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-1815 security@wordfence.com security@wordfence.com |
| brainstormforce--Spectra WordPress Gutenberg Blocks | The Spectra - WordPress Gutenberg Blocks plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'block_id' parameter in versions up to, and including, 2.13.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with author-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-4366 security@wordfence.com security@wordfence.com |
| brechtvds--WP Ultimate Post Grid | The WP Ultimate Post Grid plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'wpupg-text' shortcode in all versions up to, and including, 3.9.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-4043 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| choijun--LA-Studio Element Kit for Elementor | The LA-Studio Element Kit for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'id' parameter in all versions up to, and including, 1.3.7.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-4431 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| collizo4sky--Paid Membership Plugin, Ecommerce, User Registration Form, Login Form, User Profile & Restrict Content ProfilePress | The ProfilePress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ProfilePress User Panel widget in all versions up to, and including, 4.15.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-2861 security@wordfence.com security@wordfence.com |
| creativethemeshq--Blocksy | The Blocksy theme for WordPress is vulnerable to Stored Cross-Site Scripting via the 'has_field_link_rel' parameter in all versions up to, and including, 2.0.46 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-4943 security@wordfence.com security@wordfence.com |
| dapr--dapr | Dapr is a portable, event-driven, runtime for building distributed applications across cloud and edge. Dapr sends the app token of the invoker app instead of the app token of the invoked app. This causes of a leak of the application token of the invoker app to the invoked app when using Dapr as a gRPC proxy for remote service invocation. This vulnerability impacts Dapr users who use Dapr as a gRPC proxy for remote service invocation as well as the Dapr App API token functionality. An attacker could exploit this vulnerability to gain access to the app token of the invoker app, potentially compromising security and authentication mechanisms. This vulnerability was patched in version 1.13.3. | 2024-05-23 | 5.3 | CVE-2024-35223 security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| daveshine--Toolbar Extras for Elementor & More WordPress Admin Bar Enhanced | The Toolbar Extras for Elementor & More - WordPress Admin Bar Enhanced plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'tbex-version' shortcode in all versions up to, and including, 1.4.9 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-3611 security@wordfence.com security@wordfence.com |
| designextreme--Reviews and Rating Google Reviews | The Reviews and Rating - Google Reviews plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's file upload feature in all versions up to, and including, 5.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-25 | 6.4 | CVE-2024-5218 security@wordfence.com security@wordfence.com security@wordfence.com |
| devitemsllc--HT Mega Absolute Addons For Elementor | The HT Mega - Absolute Addons For Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'popover_header_text' parameter in versions up to, and including, 2.5.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-4876 security@wordfence.com security@wordfence.com security@wordfence.com |
| devitemsllc--HT Mega Absolute Addons For Elementor | The HT Mega - Absolute Addons For Elementor plugin for WordPress is vulnerable to unauthorized modification of data|loss of data due to a missing capability check on the 'ajax_dismiss' function in versions up to, and including, 2.5.2. This makes it possible for authenticated attackers, with subscriber-level permissions and above, to update options such as users_can_register, which can lead to unauthorized user registration. | 2024-05-21 | 4.3 | CVE-2024-4875 security@wordfence.com security@wordfence.com security@wordfence.com |
| devitemsllc--ShopLentor WooCommerce Builder for Elementor & Gutenberg +12 Modules All in One Solution (formerly WooLentor) | The ShopLentor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's woolentorsearch shortcode in all versions up to, and including, 2.8.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-3345 security@wordfence.com security@wordfence.com security@wordfence.com |
| dglingren--Media Library Assistant | The Media Library Assistant plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the lang parameter in all versions up to, and including, 3.15 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | 2024-05-22 | 6.1 | CVE-2024-3519 security@wordfence.com security@wordfence.com |
| elemntor--Elementor Website Builder More than Just a Page Builder | The Elementor Website Builder - More than Just a Page Builder plugin for WordPress is vulnerable to DOM-Based Stored Cross-Site Scripting via the 'hover_animation' parameter in versions up to, and including, 3.21.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-4619 security@wordfence.com security@wordfence.com security@wordfence.com |
| emarket-design--YouTube Video Gallery by YouTube Showcase Video Gallery Plugin for WordPress | The YouTube Video Gallery by YouTube Showcase - Video Gallery Plugin for WordPress plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the emd_form_builder_lite_submit_form function in all versions up to, and including, 3.3.6. This makes it possible for unauthenticated attackers to create arbitrary posts or pages. | 2024-05-21 | 5.3 | CVE-2024-3268 security@wordfence.com security@wordfence.com |
| farhannoor--ApplyOnline Application Form Builder and Manager | The ApplyOnline - Application Form Builder and Manager plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the aol_modal_box AJAX action in all versions up to, and including, 2.6. This makes it possible for authenticated attackers, with subscriber access or higher, to view Application submissions. | 2024-05-22 | 4.3 | CVE-2024-2036 security@wordfence.com security@wordfence.com |
| gn_themes--WP Shortcodes Plugin Shortcodes Ultimate | The WP Shortcodes Plugin - Shortcodes Ultimate plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'su_members' shortcode in all versions up to, and including, 7.1.5 due to insufficient input sanitization and output escaping on user supplied 'color' attribute. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-4553 security@wordfence.com security@wordfence.com security@wordfence.com |
| gpriday--Page Builder by SiteOrigin | The Page Builder by SiteOrigin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'siteorigin_widget' shortcode in all versions up to, and including, 2.29.15 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-4361 security@wordfence.com security@wordfence.com security@wordfence.com |
| gpriday--SiteOrigin Widgets Bundle | The SiteOrigin Widgets Bundle plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'siteorigin_widget' shortcode in all versions up to, and including, 1.60.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-4362 security@wordfence.com security@wordfence.com security@wordfence.com |
| hashthemes--Hash Elements | The Hash Elements plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'url' parameter within multiple widgets in all versions up to, and including, 1.3.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-5177 security@wordfence.com security@wordfence.com security@wordfence.com |
| icegram--Email Subscribers by Icegram Express Email Marketing, Newsletters, Automation for WordPress & WooCommerce | The Email Subscribers by Icegram Express - Email Marketing, Newsletters, Automation for WordPress & WooCommerce plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the get_template_content function in all versions up to, and including, 5.7.17. This makes it possible for authenticated attackers, with subscriber access and above, to obtain the contents of private and password-protected posts. | 2024-05-23 | 4.3 | CVE-2024-3626 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| ivanti -- endpoint_manager_mobile | A local privilege escalation vulnerability in EPMM before 12.1.0.0 allows an authenticated local user to bypass shell restriction and execute arbitrary commands on the appliance. | 2024-05-22 | 6.7 | CVE-2024-22026 support@hackerone.com |
| juangirini--Automatic Translator with Google Translate | The Automatic Translator with Google Translate plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the custom font setting in all versions up to, and including, 1.5.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. | 2024-05-22 | 4.4 | CVE-2024-0632 security@wordfence.com security@wordfence.com |
| jupyter-server--jupyter-scheduler | Jupyter Scheduler is collection of extensions for programming jobs to run now or run on a schedule. The list of conda environments of `jupyter-scheduler` users maybe be exposed, potentially revealing information about projects that a specific user may be working on. This vulnerability has been patched in version(s) 1.1.6, 1.2.1, 1.8.2 and 2.5.2. | 2024-05-23 | 5.3 | CVE-2024-28188 security-advisories@github.com security-advisories@github.com |
| justin_k--WP-ViperGB | The WP-ViperGB plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.6.1. This is due to missing or incorrect nonce validation when saving plugin settings. This makes it possible for unauthenticated attackers to change the plugin's settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. | 2024-05-24 | 4.3 | CVE-2024-4409 security@wordfence.com security@wordfence.com |
| kapasias--LottieFiles JSON Based Animation Lottie & Bodymovin for Elementor | The LottieFiles - JSON Based Animation Lottie & Bodymovin for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 1.10.9 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-5060 security@wordfence.com security@wordfence.com security@wordfence.com |
| leap13--Premium Addons for Elementor | The Premium Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's menu and shape widgets in all versions up to, and including, 4.10.30 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-4378 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| legalweb--WP DSGVO Tools (GDPR) | The WP DSGVO Tools (GDPR) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'pp_link' shortcode in all versions up to, and including, 3.1.32 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-3201 security@wordfence.com security@wordfence.com |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid NULL dereference of timing generator [Why & How] Check whether assigned timing generator is NULL or not before accessing its funcs to prevent NULL dereference. | 2024-05-21 | 5.5 | CVE-2023-52753 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer() When ddc_service_construct() is called, it explicitly checks both the link type and whether there is something on the link which will dictate whether the pin is marked as hw_supported. If the pin isn't set or the link is not set (such as from unloading/reloading amdgpu in an IGT test) then fail the amdgpu_dm_i2c_xfer() call. | 2024-05-21 | 5.5 | CVE-2023-52773 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: wangxun: fix kernel panic due to null pointer When the device uses a custom subsystem vendor ID, the function wx_sw_init() returns before the memory of 'wx->mac_table' is allocated. The null pointer will causes the kernel panic. | 2024-05-21 | 5.5 | CVE-2023-52783 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: iio: adc: stm32-adc: harden against NULL pointer deref in stm32_adc_probe() of_match_device() may fail and returns a NULL pointer. In practice there is no known reasonable way to trigger this, but in case one is added in future, harden the code by adding the check | 2024-05-21 | 5.5 | CVE-2023-52802 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Fix possible null-ptr-deref when assigning a stream While AudioDSP drivers assign streams exclusively of HOST or LINK type, nothing blocks a user to attempt to assign a COUPLED stream. As supplied substream instance may be a stub, what is the case when code-loading, such scenario ends with null-ptr-deref. | 2024-05-21 | 5.5 | CVE-2023-52806 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup() fc_lport_ptp_setup() did not check the return value of fc_rport_create() which can return NULL and would cause a NULL pointer dereference. Address this issue by checking return value of fc_rport_create() and log error message on fc_rport_create() failed. | 2024-05-21 | 5.5 | CVE-2023-52809 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential null pointer derefernce The amdgpu_ras_get_context may return NULL if device not support ras feature, so add check before using. | 2024-05-21 | 5.5 | CVE-2023-52814 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vkms: fix a possible null pointer dereference In amdgpu_vkms_conn_get_modes(), the return value of drm_cvt_mode() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_cvt_mode(). Add a check to avoid null pointer dereference. | 2024-05-21 | 5.5 | CVE-2023-52815 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ en ---truncated--- | 2024-05-21 | 5.5 | CVE-2023-52817 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/panel: fix a possible null pointer dereference In versatile_panel_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. | 2024-05-21 | 5.5 | CVE-2023-52821 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init() If ulp = kzalloc() fails, the allocated edev will leak because it is not properly assigned and the cleanup path will not be able to free it. Fix it by assigning it properly immediately after allocation. | 2024-05-20 | 5.5 | CVE-2024-35972 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix memory leak in hci_req_sync_complete() In 'hci_req_sync_complete()', always free the previous sync request state before assigning reference to a new one. | 2024-05-20 | 5.5 | CVE-2024-35978 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid infinite loop trying to resize local TT If the MTU of one of an attached interface becomes too small to transmit the local translation table then it must be resized to fit inside all fragments (when enabled) or a single packet. But if the MTU becomes too low to transmit even the header + the VLAN specific part then the resizing of the local TT will never succeed. This can for example happen when the usable space is 110 bytes and 11 VLANs are on top of batman-adv. In this case, at least 116 byte would be needed. There will just be an endless spam of batman_adv: batadv0: Forced to purge local tt entries to fit new maximum fragment MTU (110) in the log but the function will never finish. Problem here is that the timeout will be halved all the time and will then stagnate at 0 and therefore never be able to reduce the table even more. There are other scenarios possible with a similar result. The number of BATADV_TT_CLIENT_NOPURGE entries in the local TT can for example be too high to fit inside a packet. Such a scenario can therefore happen also with only a single VLAN + 7 non-purgable addresses - requiring at least 120 bytes. While this should be handled proactively when: * interface with too low MTU is added * VLAN is added * non-purgeable local mac is added * MTU of an attached interface is reduced * fragmentation setting gets disabled (which most likely requires dropping attached interfaces) not all of these scenarios can be prevented because batman-adv is only consuming events without the the possibility to prevent these actions (non-purgable MAC address added, MTU of an attached interface is reduced). It is therefore necessary to also make sure that the code is able to handle also the situations when there were already incompatible system configuration are present. | 2024-05-20 | 5.5 | CVE-2024-35982 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: fix NULL function pointer dereference Baruch reported an OOPS when using the designware controller as target only. Target-only modes break the assumption of one transfer function always being available. Fix this by always checking the pointer in __i2c_transfer. [wsa: dropped the simplification in core-smbus to avoid theoretical regressions] | 2024-05-20 | 5.5 | CVE-2024-35984 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: dma: xilinx_dpdma: Fix locking There are several places where either chan->lock or chan->vchan.lock was not held. Add appropriate locking. This fixes lockdep warnings like [ 31.077578] ------------[ cut here ]------------ [ 31.077831] WARNING: CPU: 2 PID: 40 at drivers/dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.077953] Modules linked in: [ 31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 Not tainted 6.6.20+ #98 [ 31.078102] Hardware name: xlnx,zynqmp (DT) [ 31.078169] Workqueue: events_unbound deferred_probe_work_func [ 31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.078377] pc : xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.078473] lr : xilinx_dpdma_chan_queue_transfer+0x270/0x5e0 [ 31.078550] sp : ffffffc083bb2e10 [ 31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: ffffff880165a168 [ 31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480 [ 31.078920] x23: ffffff880165a148 x22: ffffff880164e988 x21: 0000000000000000 [ 31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000 [ 31.079295] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001 [ 31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9 : 0001ffc082aa3def [ 31.079824] x8 : 0001ffc082aa3dec x7 : 0000000000000000 x6 : 0000000000000516 [ 31.079982] x5 : ffffffc7f8d43000 x4 : ffffff88003c9c40 x3 : ffffffffffffffff [ 31.080147] x2 : ffffffc7f8d43000 x1 : 00000000000000c0 x0 : 0000000000000000 [ 31.080307] Call trace: [ 31.080340] xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.080518] xilinx_dpdma_issue_pending+0x11c/0x120 [ 31.080595] zynqmp_disp_layer_update+0x180/0x3ac [ 31.080712] zynqmp_dpsub_plane_atomic_update+0x11c/0x21c [ 31.080825] drm_atomic_helper_commit_planes+0x20c/0x684 [ 31.080951] drm_atomic_helper_commit_tail+0x5c/0xb0 [ 31.081139] commit_tail+0x234/0x294 [ 31.081246] drm_atomic_helper_commit+0x1f8/0x210 [ 31.081363] drm_atomic_commit+0x100/0x140 [ 31.081477] drm_client_modeset_commit_atomic+0x318/0x384 [ 31.081634] drm_client_modeset_commit_locked+0x8c/0x24c [ 31.081725] drm_client_modeset_commit+0x34/0x5c [ 31.081812] __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168 [ 31.081899] drm_fb_helper_set_par+0x50/0x70 [ 31.081971] fbcon_init+0x538/0xc48 [ 31.082047] visual_init+0x16c/0x23c [ 31.082207] do_bind_con_driver.isra.0+0x2d0/0x634 [ 31.082320] do_take_over_console+0x24c/0x33c [ 31.082429] do_fbcon_takeover+0xbc/0x1b0 [ 31.082503] fbcon_fb_registered+0x2d0/0x34c [ 31.082663] register_framebuffer+0x27c/0x38c [ 31.082767] __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c [ 31.082939] drm_fb_helper_initial_config+0x50/0x74 [ 31.083012] drm_fbdev_dma_client_hotplug+0xb8/0x108 [ 31.083115] drm_client_register+0xa0/0xf4 [ 31.083195] drm_fbdev_dma_setup+0xb0/0x1cc [ 31.083293] zynqmp_dpsub_drm_init+0x45c/0x4e0 [ 31.083431] zynqmp_dpsub_probe+0x444/0x5e0 [ 31.083616] platform_probe+0x8c/0x13c [ 31.083713] really_probe+0x258/0x59c [ 31.083793] __driver_probe_device+0xc4/0x224 [ 31.083878] driver_probe_device+0x70/0x1c0 [ 31.083961] __device_attach_driver+0x108/0x1e0 [ 31.084052] bus_for_each_drv+0x9c/0x100 [ 31.084125] __device_attach+0x100/0x298 [ 31.084207] device_initial_probe+0x14/0x20 [ 31.084292] bus_probe_device+0xd8/0xdc [ 31.084368] deferred_probe_work_func+0x11c/0x180 [ 31.084451] process_one_work+0x3ac/0x988 [ 31.084643] worker_thread+0x398/0x694 [ 31.084752] kthread+0x1bc/0x1c0 [ 31.084848] ret_from_fork+0x10/0x20 [ 31.084932] irq event stamp: 64549 [ 31.084970] hardirqs last enabled at (64548): [<ffffffc081adf35c>] _raw_spin_unlock_irqrestore+0x80/0x90 [ 31.085157] ---truncated--- | 2024-05-20 | 5.5 | CVE-2024-35990 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: phy: marvell: a3700-comphy: Fix out of bounds read There is an out of bounds read access of 'gbe_phy_init_fix[fix_idx].addr' every iteration after 'fix_idx' reaches 'ARRAY_SIZE(gbe_phy_init_fix)'. Make sure 'gbe_phy_init[addr]' is used when all elements of 'gbe_phy_init_fix' array are handled. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 2024-05-20 | 5.5 | CVE-2024-35992 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up The flag I2C_HID_READ_PENDING is used to serialize I2C operations. However, this is not necessary, because I2C core already has its own locking for that. More importantly, this flag can cause a lock-up: if the flag is set in i2c_hid_xfer() and an interrupt happens, the interrupt handler (i2c_hid_irq) will check this flag and return immediately without doing anything, then the interrupt handler will be invoked again in an infinite loop. Since interrupt handler is an RT task, it takes over the CPU and the flag-clearing task never gets scheduled, thus we have a lock-up. Delete this unnecessary flag. | 2024-05-20 | 5.5 | CVE-2024-35997 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv4: check for NULL idev in ip_route_use_hint() syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199 | 2024-05-20 | 5.5 | CVE-2024-36008 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| mdempfle--Advanced iFrame | The Advanced iFrame plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'add_iframe_url_as_param_direct' parameter in versions up to, and including, 2024.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-4365 security@wordfence.com security@wordfence.com security@wordfence.com |
| mohsinrasool--PayPal Pay Now, Buy Now, Donation and Cart Buttons Shortcode | The PayPal Pay Now, Buy Now, Donation and Cart Buttons Shortcode plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 1.7 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. | 2024-05-23 | 4.4 | CVE-2024-3065 security@wordfence.com security@wordfence.com |
| moveaddons--Move Addons for Elementor | The Move Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple widgets in all versions up to, and including, 1.3.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-4695 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| n/a--VMware vCenter Server | The vCenter Server contains a partial file read vulnerability. A malicious actor with administrative privileges on the vCenter appliance shell may exploit this issue to partially read arbitrary files containing sensitive data. | 2024-05-21 | 4.9 | CVE-2024-22275 security@vmware.com |
| naa986--Videojs HTML5 Player | The Videojs HTML5 Player plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's videojs_video shortcode in all versions up to, and including, 1.1.11 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-5205 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| nextscripts--NextScripts: Social Networks Auto-Poster | The NextScripts: Social Networks Auto-Poster plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the HTTP_USER_AGENT header in all versions up to, and including, 4.4.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the victim to select view "All Cron Events" in order for the injection to fire. | 2024-05-22 | 6.1 | CVE-2024-1762 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| nextscripts--NextScripts: Social Networks Auto-Poster | The NextScripts: Social Networks Auto-Poster plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 4.4.3. This is due to missing or incorrect nonce validation on the nxssnap-reposter page. This makes it possible for unauthenticated attackers to delete arbitrary posts or pages via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. | 2024-05-22 | 5.4 | CVE-2024-1446 security@wordfence.com security@wordfence.com |
| nicdark--ND Shortcodes | The ND Shortcodes plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's upload feature in all versions up to, and including, 7.5 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-25 | 6.4 | CVE-2024-5220 security@wordfence.com security@wordfence.com security@wordfence.com |
| nicheaddons--Primary Addon for Elementor | The Primary Addon for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Pricing Table widget in all versions up to, and including, 1.5.5 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-25 | 6.4 | CVE-2024-5229 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| njba--Ninja Beaver Add-ons for Beaver Builder | The Ninja Beaver Add-ons for Beaver Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's widgets in all versions up to, and including, 2.4.5 due to insufficient input sanitization and output escaping on user supplied attributes such as urls. This makes it possible for authenticated attackers with contributor-level and above permissions to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-2163 security@wordfence.com security@wordfence.com |
| ome--omero-web | OMERO.web provides a web based client and plugin infrastructure. There is currently no escaping or validation of the `callback` parameter that can be passed to various OMERO.web endpoints that have JSONP enabled. This vulnerability has been patched in version 5.26.0. | 2024-05-21 | 6.1 | CVE-2024-35180 security-advisories@github.com security-advisories@github.com |
| opajaap--WP Photo Album Plus | The WP Photo Album Plus plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 8.7.02.003. This is due to the plugin allowing unauthenticated users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. | 2024-05-24 | 6.5 | CVE-2024-4037 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| optinmonster--Popup Builder by OptinMonster WordPress Popups for Optins, Email Newsletters and Lead Generation | The Popup Builder by OptinMonster - WordPress Popups for Optins, Email Newsletters and Lead Generation plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'campaign_id' parameter in versions up to, and including, 2.16.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-25 | 6.4 | CVE-2024-4045 security@wordfence.com security@wordfence.com security@wordfence.com |
| pickplugins--Post Grid, Form Maker, Popup Maker, WooCommerce Blocks, Post Blocks, Post Carousel Combo Blocks | The Post Grid, Form Maker, Popup Maker, WooCommerce Blocks, Post Blocks, Post Carousel - Combo Blocks plugin for WordPress is vulnerable to Stored Cross-Site Scripting via several parameters in all versions up to, and including, 2.2.80 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-3155 security@wordfence.com security@wordfence.com |
| posimyththemes--The Plus Addons for Elementor Elementor Addons, Page Templates, Widgets, Mega Menu, WooCommerce | The The Plus Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Hover Card widget in all versions up to, and including, 5.5.4 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-2784 security@wordfence.com security@wordfence.com |
| posimyththemes--The Plus Addons for Elementor Elementor Addons, Page Templates, Widgets, Mega Menu, WooCommerce | The The Plus Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via several of the plugin's widgets all versions up to, and including, 5.5.4 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-3718 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| posimyththemes--The Plus Addons for Elementor Elementor Addons, Page Templates, Widgets, Mega Menu, WooCommerce | The The Plus Addons for Elementor - Elementor Addons, Page Templates, Widgets, Mega Menu, WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'xai_username' parameter in versions up to, and including, 5.5.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-4484 security@wordfence.com security@wordfence.com security@wordfence.com |
| posimyththemes--The Plus Addons for Elementor Elementor Addons, Page Templates, Widgets, Mega Menu, WooCommerce | The The Plus Addons for Elementor - Elementor Addons, Page Templates, Widgets, Mega Menu, WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'button_custom_attributes' parameter in versions up to, and including, 5.5.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-4485 security@wordfence.com security@wordfence.com security@wordfence.com |
| psf--requests | Requests is a HTTP library. Prior to 2.32.0, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. This vulnerability is fixed in 2.32.0. | 2024-05-20 | 5.6 | CVE-2024-35195 security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| quantumcloud--AI ChatBot for WordPress WPBot | The AI ChatBot plugin for WordPress is vulnerable to unauthorized access of data due to a missing capability check on the openai_file_list_callback function in all versions up to, and including, 5.3.4. This makes it possible for authenticated attackers, with subscriber-level access and above, to list files existing in a linked OpenAI account. | 2024-05-22 | 5 | CVE-2024-0451 security@wordfence.com security@wordfence.com security@wordfence.com |
| quantumcloud--AI ChatBot for WordPress WPBot | The AI ChatBot plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the openai_file_upload_callback function in all versions up to, and including, 5.3.4. This makes it possible for authenticated attackers, with subscriber-level access and above, to upload files to a linked OpenAI account. | 2024-05-22 | 5 | CVE-2024-0452 security@wordfence.com security@wordfence.com security@wordfence.com |
| quantumcloud--AI ChatBot for WordPress WPBot | The AI ChatBot plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the openai_file_delete_callback function in all versions up to, and including, 5.3.4. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete files from a linked OpenAI account. | 2024-05-22 | 5 | CVE-2024-0453 security@wordfence.com security@wordfence.com security@wordfence.com |
| rafiul17--Awesome Contact Form7 for Elementor | The Awesome Contact Form7 for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'AEP Contact Form 7' widget in all versions up to, and including, 2.9 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-4486 security@wordfence.com security@wordfence.com |
| rainbowgeek--SEOPress On-site SEO | The SEOPress - On-site SEO plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the SEO title and description parameters as well as others in all versions up to, and including, 7.5.2.1 due to insufficient input sanitization and output escaping. This makes it possible for attackers, with contributor access or higher, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-1134 security@wordfence.com security@wordfence.com |
| rico-macchi--WP Scraper | The WP Scraper plugin for WordPress is vulnerable to unauthorized access due to a missing capability check on the wp_scraper_multi_scrape_action() function in all versions up to, and including, 5.7. This makes it possible for authenticated attackers, with subscriber-level access and above, to create arbitrary pages and posts. | 2024-05-22 | 4.3 | CVE-2024-3663 security@wordfence.com security@wordfence.com |
| rometheme--RomethemeForm For Elementor | The RomethemeForm For Elementor plugin for WordPress is vulnerable to unauthorized access and modification of data due to a missing capability check on the export_entries, rtformnewform, and rtformupdate functions in all versions up to, and including, 1.1.5. This makes it possible for unauthenticated attackers to export arbitrary form submissions, create new forms, or update any post title or certain metadata. | 2024-05-23 | 5.3 | CVE-2023-6325 security@wordfence.com security@wordfence.com security@wordfence.com |
| sharethis--ShareThis Share Buttons | The ShareThis Share Buttons plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'sharethis-inline-button' shortcode in all versions up to, and including, 2.3.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-3648 security@wordfence.com security@wordfence.com |
| spyrosvl--WP Font Awesome Share Icons | The WP Font Awesome Share Icons plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'wpfai_social' shortcode in all versions up to, and including, 1.1.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-3198 security@wordfence.com security@wordfence.com |
| stacklok--minder | Minder is a software supply chain security platform. Prior to version 0.0.50, Minder engine is susceptible to a denial of service from memory exhaustion that can be triggered from maliciously created templates. Minder engine uses templating to generate strings for various use cases such as URLs, messages for pull requests, descriptions for advisories. In some cases can the user control both the template and the params for it, and in a subset of these cases, Minder reads the generated template entirely into memory. When Minders templating meets both of these conditions, an attacker is able to generate large enough templates that Minder will exhaust memory and crash. This vulnerability is fixed in 0.0.50. | 2024-05-20 | 5.3 | CVE-2024-35194 security-advisories@github.com security-advisories@github.com |
| tauri-apps--tauri | Tauri is a framework for building binaries for all major desktop platforms. Remote origin iFrames in Tauri applications can access the Tauri IPC endpoints without being explicitly allowed in the `dangerousRemoteDomainIpcAccess` in v1 and in the `capabilities` in v2. Valid commands with potentially unwanted consequences ("delete project", "transfer credits", etc.) could be invoked by an attacker that controls the content of an iframe running inside a Tauri app. This vulnerability has been patched in versions 1.6.7 and 2.0.0-beta.19. | 2024-05-23 | 5.9 | CVE-2024-35222 security-advisories@github.com security-advisories@github.com |
| theluckywp--LuckyWP Table of Contents | The LuckyWP Table of Contents plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the attrs parameter in all versions up to, and including, 2.1.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | 2024-05-22 | 6.1 | CVE-2024-2119 security@wordfence.com security@wordfence.com |
| theluckywp--LuckyWP Table of Contents | The LuckyWP Table of Contents plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple parameters in versions up to, and including, 2.1.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers with Contributor permissions and above to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 5.5 | CVE-2024-2953 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| theluckywp--LuckyWP Table of Contents | The LuckyWP Table of Contents plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'Header Title' field in all versions up to and including 2.1.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level access, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. | 2024-05-22 | 4.4 | CVE-2023-6487 security@wordfence.com security@wordfence.com |
| themefusecom--Brizy Page Builder | The Brizy - Page Builder plugin for WordPress is vulnerable to unauthorized plugin setting update due to a missing capability check on the functions action_request_disable, action_change_template, and action_request_enable in all versions up to, and including, 2.4.43. This makes it possible for authenticated attackers, with contributor access or above, to enable/disable the Brizy editor and modify the template used. | 2024-05-23 | 4.3 | CVE-2024-3711 security@wordfence.com security@wordfence.com security@wordfence.com |
| themehunk--Responsive Contact Form Builder & Lead Generation Plugin | The Responsive Contact Form Builder & Lead Generation Plugin plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 1.9.1. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute arbitrary shortcodes. | 2024-05-22 | 5.4 | CVE-2024-4261 security@wordfence.com security@wordfence.com |
| themewinter--WPCafe Online Food Ordering, Restaurant Menu, Delivery, and Reservations for WooCommerce | The WPCafe - Restaurant Menu, Online Ordering for WooCommerce, Pickup / Delivery and Table Reservation plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 2.2.23 via the wpc_check_for_submission function. This makes it possible for unauthenticated attackers to make web requests to arbitrary locations originating from the web application. | 2024-05-23 | 5.3 | CVE-2024-1855 security@wordfence.com security@wordfence.com security@wordfence.com |
| thimpress--LearnPress WordPress LMS Plugin | The LearnPress - WordPress LMS Plugin plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'id' parameter in all versions up to, and including, 4.2.6.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | 2024-05-22 | 6.4 | CVE-2024-4971 security@wordfence.com security@wordfence.com |
| uapp--Testimonial Carousel For Elementor | The Testimonial Carousel For Elementor plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'save_testimonials_option_callback' function in versions up to, and including, 10.2.0. This makes it possible for unauthenticated attackers to update the OpenAI API key, disabling the feature. | 2024-05-25 | 5.3 | CVE-2024-4858 security@wordfence.com security@wordfence.com security@wordfence.com |
| umbraco--Umbraco-CMS | Umbraco is an ASP.NET CMS used by more than 730.000 websites. Umbraco has an endpoint that is vulnerable to open redirects. The endpoint is protected so it requires the user to be signed into backoffice before the vulnerable is exposed. This vulnerability has been patched in version(s) 8.18.14, 10.8.6, 12.3.10 and 13.3.1. | 2024-05-21 | 6.1 | CVE-2024-34071 security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| umbraco--Umbraco-CMS | Umbraco CMS is an ASP.NET CMS used by more than 730.000 websites. Stored Cross-site scripting (XSS) enable attackers that have access to backoffice to bring malicious content into a website or application. This vulnerability has been patched in version(s) 8.18.13, 10.8.4, 12.3.7, 13.1.1 by implementing IHtmlSanitizer. | 2024-05-21 | 4.2 | CVE-2024-35218 security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| vberkel--Schema App Structured Data | The Schema App Structured Data plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the MarkupUpdate function in all versions up to, and including, 2.1.0. This makes it possible for authenticated attackers, with subscriber access or higher, to update or delete post metadata. | 2024-05-24 | 4.3 | CVE-2024-0893 security@wordfence.com security@wordfence.com |
| verbb--formie | Formie is a Craft CMS plugin for creating forms. Prior to 2.1.6, users with access to a form's settings can include malicious Twig code into fields that support Twig. These might be the Submission Title or the Success Message. This code will then be executed upon creating a submission, or rendering the text. This has been fixed in Formie 2.1.6. | 2024-05-20 | 4.4 | CVE-2024-35191 security-advisories@github.com security-advisories@github.com |
| webvitaly--iframe | The iframe plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's shortcode(s) in all versions up to and including 5.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers with contributor-level and above permissions to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 5 | CVE-2023-6844 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| wpbean--WPB Elementor Addons | The WPB Elementor Addons plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'url' parameter in all versions up to, and including, 1.0.9 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-4896 security@wordfence.com security@wordfence.com security@wordfence.com |
| wpdatatables--wpDataTables WordPress Data Table, Dynamic Tables & Table Charts Plugin | The wpDataTables - WordPress Data Table, Dynamic Tables & Table Charts Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the CSV import functionality in all versions up to, and including, 3.4.2.12 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 4.7 | CVE-2024-4895 security@wordfence.com security@wordfence.com security@wordfence.com |
| wpdevteam--EmbedPress Embed PDF, Google Docs, Vimeo, Wistia, Embed YouTube Videos, Audios, Maps & Embed Any Documents in Gutenberg & Elementor | The EmbedPress - Embed PDF, Google Docs, Vimeo, Wistia, Embed YouTube Videos, Audios, Maps & Embed Any Documents in Gutenberg & Elementor plugin for WordPress is vulnerable to unauthorized access of functionality due to insufficient authorization validation on the PDF embed block in all versions up to, and including, 3.9.12. This makes it possible for authenticated attackers, with contributor-level access and above, to embed PDF blocks. | 2024-05-23 | 4.3 | CVE-2024-1803 security@wordfence.com security@wordfence.com |
| wpgmaps--WP Go Maps (formerly WP Google Maps) | The WP Go Maps (formerly WP Google Maps) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's wpgmza shortcode in all versions up to, and including, 9.0.36 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-24 | 6.4 | CVE-2024-3557 security@wordfence.com security@wordfence.com security@wordfence.com |
| wpkoithemes--WPKoi Templates for Elementor | The WPKoi Templates for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'id', 'mixColor', 'backgroundColor', 'saveInCookies', and 'autoMatchOsTheme' parameters in all versions up to, and including, 2.5.9 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-4980 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| wpmet--ElementsKit Pro | The ElementsKit Pro plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'url' parameter in versions up to, and including, 3.6.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-21 | 6.4 | CVE-2024-4452 security@wordfence.com security@wordfence.com |
| wpo365--WordPress + Microsoft Office 365 / Azure AD | LOGIN | The WordPress + Microsoft Office 365 / Azure AD | LOGIN plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'pintra' shortcode in all versions up to, and including, 27.2 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-23 | 6.4 | CVE-2024-4706 security@wordfence.com security@wordfence.com |
| wpopal--Opal Estate Pro Property Management and Submission | The Opal Estate Pro - Property Management and Submission plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the agent latitude and longitude parameters in all versions up to, and including, 1.7.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-05-22 | 6.4 | CVE-2024-3666 security@wordfence.com security@wordfence.com |
| wptb--WP Table Builder WordPress Table Plugin | The WP Table Builder - WordPress Table Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the button element in all versions up to, and including, 1.4.14 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. By default, this can only be exploited by administrators, but the ability to use and configure WP Table Builder can be extended to contributors. | 2024-05-21 | 6.4 | CVE-2024-4700 security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
Low Vulnerabilities
| Primary Vendor -- Product | Description | Published | CVSS Score | Source & Patch Info |
|---|---|---|---|---|
| PHPGurukul--Directory Management System | A vulnerability classified as problematic has been found in PHPGurukul Directory Management System 1.0. Affected is an unknown function of the file /admin/search-directory.php.. The manipulation leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265212. | 2024-05-20 | 2.4 | CVE-2024-5136 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| PHPGurukul--Directory Management System | A vulnerability classified as problematic was found in PHPGurukul Directory Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /admin/admin-profile.php of the component Searchbar. The manipulation leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265213 was assigned to this vulnerability. | 2024-05-20 | 2.4 | CVE-2024-5137 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Qiwen--Netdisk | A vulnerability was found in Qiwen Netdisk up to 1.4.0. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the component File Rename Handler. The manipulation with the input <img src="" onerror="alert(document.cookie)"> leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-266083. | 2024-05-23 | 3.5 | CVE-2024-5279 cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Event Registration System | A vulnerability was found in SourceCodester Event Registration System 1.0. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /registrar/?page=registration. The manipulation of the argument e leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265201 was assigned to this vulnerability. | 2024-05-20 | 3.5 | CVE-2024-5121 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| huandu--facebook | github.com/huandu/facebook is a Go package that fully supports the Facebook Graph API with file upload, batch request and marketing API. access_token can be exposed in error message on fail in HTTP request. This issue has been patched in version 2.7.2. | 2024-05-24 | 3.7 | CVE-2024-35232 security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| n/a--FastCMS | A vulnerability was found in FastCMS up to 0.1.5 and classified as problematic. Affected by this issue is some unknown functionality of the component New Article Tab. The manipulation of the argument Title leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-266126 is the identifier assigned to this vulnerability. | 2024-05-24 | 2.4 | CVE-2023-1111 cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| n/a--JFinalCMS | A vulnerability classified as problematic has been found in JFinalCMS up to 20221020. This affects an unknown part of the file /admin/content. The manipulation of the argument Title leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-266121 was assigned to this vulnerability. | 2024-05-24 | 2.4 | CVE-2024-5310 cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| vantage6--vantage6 | vantage6 is an open-source infrastructure for privacy preserving analysis. Collaboration administrators can add extra organizations to their collaboration that can extend their influence. For example, organizations that they include can then create new users for which they know the passwords, and use that to read task results of other collaborations that that organization is involved in. This is only relatively trusted users - with access to manage a collaboration - are able to do this, which reduces the impact. This vulnerability was patched in version 4.5.0rc3. | 2024-05-23 | 2.7 | CVE-2024-32969 security-advisories@github.com security-advisories@github.com |
| xuliangzhan--vxe-table | A vulnerability, which was classified as problematic, has been found in xuliangzhan vxe-table up to 3.7.9. This issue affects the function export of the file packages/textarea/src/textarea.js of the component vxe-textarea. The manipulation of the argument inputValue leads to cross site scripting. The attack may be initiated remotely. Upgrading to version 3.7.10 is able to address this issue. The patch is named d70b0e089740b65a22c89c106ebc4627ac48a22d. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-266123. | 2024-05-24 | 3.5 | CVE-2023-1001 cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
Severity Not Yet Assigned
| Primary Vendor -- Product | Description | Published | CVSS Score | Source & Patch Info |
|---|---|---|---|---|
| Atlassian--Confluence Data Center | This High severity RCE (Remote Code Execution) vulnerability was introduced in version 5.2 of Confluence Data Center and Server. This RCE (Remote Code Execution) vulnerability, with a CVSS Score of 8.3, allows an authenticated attacker to execute arbitrary code which has high impact to confidentiality, high impact to integrity, high impact to availability, and requires no user interaction. Atlassian recommends that Confluence Data Center and Server customers upgrade to latest version. If you are unable to do so, upgrade your instance to one of the specified supported fixed versions. See the release notes https://confluence.atlassian.com/doc/confluence-release-notes-327.html You can download the latest version of Confluence Data Center and Server from the download center https://www.atlassian.com/software/confluence/download-archives. This vulnerability was found internally. | 2024-05-21 | not yet calculated | CVE-2024-21683 security@atlassian.com security@atlassian.com |
| Avira--Prime | Avira Prime Link Following Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of Avira Prime. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the Avira Spotlight Service. By creating a symbolic link, an attacker can abuse the service to delete a file. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-21600. | 2024-05-22 | not yet calculated | CVE-2023-51636 zdi-disclosures@trendmicro.com |
| D-Link--D-View | D-Link D-View Use of Hard-coded Cryptographic Key Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of D-Link D-View. Authentication is not required to exploit this vulnerability. The specific flaw exists within the TokenUtils class. The issue results from a hard-coded cryptographic key. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-21991. | 2024-05-23 | not yet calculated | CVE-2024-5296 zdi-disclosures@trendmicro.com |
| D-Link--D-View | D-Link D-View executeWmicCmd Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link D-View. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the executeWmicCmd method. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21821. | 2024-05-23 | not yet calculated | CVE-2024-5297 zdi-disclosures@trendmicro.com |
| D-Link--D-View | D-Link D-View queryDeviceCustomMonitorResult Exposed Dangerous Method Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link D-View. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the queryDeviceCustomMonitorResult method. The issue results from an exposed dangerous method. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21842. | 2024-05-23 | not yet calculated | CVE-2024-5298 zdi-disclosures@trendmicro.com |
| D-Link--D-View | D-Link D-View execMonitorScript Exposed Dangerous Method Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of D-Link D-View. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the execMonitorScript method. The issue results from an exposed dangerous method. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21828. | 2024-05-23 | not yet calculated | CVE-2024-5299 zdi-disclosures@trendmicro.com |
| D-Link--DIR-2150 | D-Link DIR-2150 GetDeviceSettings Target Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2150 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the SOAP API interface, which listens on TCP port 80 by default. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21235. | 2024-05-23 | not yet calculated | CVE-2024-5291 zdi-disclosures@trendmicro.com |
| D-Link--DIR-2640 | D-Link DIR-2640 HTTP Referer Stack-Based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-2640-US routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within prog.cgi, which handles HNAP requests made to the lighttpd webserver listening on TCP ports 80 and 443. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21853. | 2024-05-23 | not yet calculated | CVE-2024-5293 zdi-disclosures@trendmicro.com |
| D-Link--DIR-3040 | D-Link DIR-3040 prog.cgi websSecurityHandler Memory Leak Denial-of-Service Vulnerability. This vulnerability allows network-adjacent attackers to create a denial-of-service condition on affected installations of D-Link DIR-3040 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the prog.cgi program, which handles HNAP requests made to the lighttpd webserver listening on ports 80 and 443. The issue results from the lack of proper memory management when processing HTTP cookie values. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. . Was ZDI-CAN-21668. | 2024-05-23 | not yet calculated | CVE-2024-5294 zdi-disclosures@trendmicro.com |
| D-Link--G416 | D-Link G416 flupl self Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link G416 wireless routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the HTTP service listening on TCP port 80. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-21294. | 2024-05-23 | not yet calculated | CVE-2024-5295 zdi-disclosures@trendmicro.com |
| D-Link--Network Assistant | D-Link Network Assistant Uncontrolled Search Path Element Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of D-Link Network Assistant. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the DNACore service. The service loads a file from an unsecured location. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-21426. | 2024-05-23 | not yet calculated | CVE-2024-5292 zdi-disclosures@trendmicro.com |
| GStreamer--GStreamer | GStreamer EXIF Metadata Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of EXIF metadata. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. . Was ZDI-CAN-23896. | 2024-05-22 | not yet calculated | CVE-2024-4453 zdi-disclosures@trendmicro.com zdi-disclosures@trendmicro.com |
| GitHub--Enterprise Server | An authentication bypass vulnerability was present in the GitHub Enterprise Server (GHES) when utilizing SAML single sign-on authentication with the optional encrypted assertions feature. This vulnerability allowed an attacker to forge a SAML response to provision and/or gain access to a user with site administrator privileges. Exploitation of this vulnerability would allow unauthorized access to the instance without requiring prior authentication. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.13.0 and was fixed in versions 3.9.15, 3.10.12, 3.11.10 and 3.12.4. This vulnerability was reported via the GitHub Bug Bounty program. | 2024-05-20 | not yet calculated | CVE-2024-4985 product-cna@github.com product-cna@github.com product-cna@github.com product-cna@github.com |
| Google--Chrome | Use after free in Scheduling in Google Chrome prior to 125.0.6422.76 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | 2024-05-22 | not yet calculated | CVE-2024-5157 chrome-cve-admin@google.com chrome-cve-admin@google.com |
| Google--Chrome | Type Confusion in V8 in Google Chrome prior to 125.0.6422.76 allowed a remote attacker to potentially perform arbitrary read/write via a crafted HTML page. (Chromium security severity: High) | 2024-05-22 | not yet calculated | CVE-2024-5158 chrome-cve-admin@google.com chrome-cve-admin@google.com |
| Google--Chrome | Heap buffer overflow in ANGLE in Google Chrome prior to 125.0.6422.76 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: High) | 2024-05-22 | not yet calculated | CVE-2024-5159 chrome-cve-admin@google.com chrome-cve-admin@google.com |
| Google--Chrome | Heap buffer overflow in Dawn in Google Chrome prior to 125.0.6422.76 allowed a remote attacker to perform an out of bounds memory write via a crafted HTML page. (Chromium security severity: High) | 2024-05-22 | not yet calculated | CVE-2024-5160 chrome-cve-admin@google.com chrome-cve-admin@google.com |
| Google--Tink | There exists a Denial of service vulnerability in Tink-cc in versions prior to 2.1.3. * An adversary can crash binaries using the crypto::tink::JsonKeysetReader in tink-cc by providing an input that is not an encoded JSON object, but still a valid encoded JSON element, for example a number or an array. This will crash as Tink just assumes any valid JSON input will contain an object. * An adversary can crash binaries using the crypto::tink::JsonKeysetReader in tink-cc by providing an input containing many nested JSON objects. This may result in a stack overflow. We recommend upgrading to version 2.1.3 or above | 2024-05-21 | not yet calculated | CVE-2024-4420 cve-coordination@google.com |
| HP Inc.--Certain HP LaserJet Pro Devices | Certain HP LaserJet Pro devices are potentially vulnerable to a Cross-Site Scripting (XSS) attack via the web management interface of the device. | 2024-05-23 | not yet calculated | CVE-2024-2301 hp-security-alert@hp.com |
| HP Inc.--Certain HP LaserJet Pro Printers | A user with device administrative privileges can change existing SMTP server settings on the device, without having to re-enter SMTP server credentials. By redirecting send-to-email traffic to the new server, the original SMTP server credentials may potentially be exposed. | 2024-05-23 | not yet calculated | CVE-2024-5143 hp-security-alert@hp.com |
| HYPR--Passwordless | Improper Verification of Cryptographic Signature vulnerability in HYPR Passwordless on Windows allows Malicious Software Update.This issue affects HYPR Passwordless: before 9.1. | 2024-05-21 | not yet calculated | CVE-2024-1721 security@hypr.com |
| Ivanti--EPMM | An SQL Injection vulnerability in a web component of EPMM versions before 12.1.0.0 allows an authenticated user with appropriate privilege to access or modify data in the underlying database. | 2024-05-22 | not yet calculated | CVE-2023-46806 support@hackerone.com |
| Ivanti--EPMM | An SQL Injection vulnerability in web component of EPMM before 12.1.0.0 allows an authenticated user with appropriate privilege to access or modify data in the underlying database. | 2024-05-22 | not yet calculated | CVE-2023-46807 support@hackerone.com |
| Jenkins Project--Jenkins Report Info Plugin | Jenkins Report Info Plugin 1.2 and earlier does not perform path validation of the workspace directory while serving report files, allowing attackers with Item/Configure permission to retrieve Surefire failures, PMD violations, Findbugs bugs, and Checkstyle errors on the controller file system by editing the workspace path. | 2024-05-24 | not yet calculated | CVE-2024-5273 jenkinsci-cert@googlegroups.com |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: avoid a use-after-free when BO init fails nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code back to the caller. On failures, ttm_bo_init() invokes the provided destructor which should de-initialize and free the memory. Thus, when nouveau_bo_init() returns an error the gem object has already been released and the memory freed by nouveau_bo_del_ttm(). | 2024-05-21 | not yet calculated | CVE-2020-36788 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: core: fix kernel panic when do reboot When do system reboot, it calls dwc3_shutdown and the whole debugfs for dwc3 has removed first, when the gadget tries to do deinit, and remove debugfs for its endpoints, it meets NULL pointer dereference issue when call debugfs_lookup. Fix it by removing the whole dwc3 debugfs later than dwc3_drd_exit. [ 2924.958838] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002 .... [ 2925.030994] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 2925.037005] pc : inode_permission+0x2c/0x198 [ 2925.041281] lr : lookup_one_len_common+0xb0/0xf8 [ 2925.045903] sp : ffff80001276ba70 [ 2925.049218] x29: ffff80001276ba70 x28: ffff0000c01f0000 x27: 0000000000000000 [ 2925.056364] x26: ffff800011791e70 x25: 0000000000000008 x24: dead000000000100 [ 2925.063510] x23: dead000000000122 x22: 0000000000000000 x21: 0000000000000001 [ 2925.070652] x20: ffff8000122c6188 x19: 0000000000000000 x18: 0000000000000000 [ 2925.077797] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000004 [ 2925.084943] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000030 [ 2925.092087] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : ffff8000102b2420 [ 2925.099232] x8 : 7f7f7f7f7f7f7f7f x7 : feff73746e2f6f64 x6 : 0000000000008080 [ 2925.106378] x5 : 61c8864680b583eb x4 : 209e6ec2d263dbb7 x3 : 000074756f307065 [ 2925.113523] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff8000122c6188 [ 2925.120671] Call trace: [ 2925.123119] inode_permission+0x2c/0x198 [ 2925.127042] lookup_one_len_common+0xb0/0xf8 [ 2925.131315] lookup_one_len_unlocked+0x34/0xb0 [ 2925.135764] lookup_positive_unlocked+0x14/0x50 [ 2925.140296] debugfs_lookup+0x68/0xa0 [ 2925.143964] dwc3_gadget_free_endpoints+0x84/0xb0 [ 2925.148675] dwc3_gadget_exit+0x28/0x78 [ 2925.152518] dwc3_drd_exit+0x100/0x1f8 [ 2925.156267] dwc3_remove+0x11c/0x120 [ 2925.159851] dwc3_shutdown+0x14/0x20 [ 2925.163432] platform_shutdown+0x28/0x38 [ 2925.167360] device_shutdown+0x15c/0x378 [ 2925.171291] kernel_restart_prepare+0x3c/0x48 [ 2925.175650] kernel_restart+0x1c/0x68 [ 2925.179316] __do_sys_reboot+0x218/0x240 [ 2925.183247] __arm64_sys_reboot+0x28/0x30 [ 2925.187262] invoke_syscall+0x48/0x100 [ 2925.191017] el0_svc_common.constprop.0+0x48/0xc8 [ 2925.195726] do_el0_svc+0x28/0x88 [ 2925.199045] el0_svc+0x20/0x30 [ 2925.202104] el0_sync_handler+0xa8/0xb0 [ 2925.205942] el0_sync+0x148/0x180 [ 2925.209270] Code: a9025bf5 2a0203f5 121f0056 370802b5 (79400660) [ 2925.215372] ---[ end trace 124254d8e485a58b ]--- [ 2925.220012] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2925.227676] Kernel Offset: disabled [ 2925.231164] CPU features: 0x00001001,20000846 [ 2925.235521] Memory Limit: none [ 2925.238580] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- (cherry picked from commit 2a042767814bd0edf2619f06fecd374e266ea068) | 2024-05-21 | not yet calculated | CVE-2021-47220 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm/slub: actually fix freelist pointer vs redzoning It turns out that SLUB redzoning ("slub_debug=Z") checks from s->object_size rather than from s->inuse (which is normally bumped to make room for the freelist pointer), so a cache created with an object size less than 24 would have the freelist pointer written beyond s->object_size, causing the redzone to be corrupted by the freelist pointer. This was very visible with "slub_debug=ZF": BUG test (Tainted: G B ): Right Redzone overwritten ----------------------------------------------------------------------------- INFO: 0xffff957ead1c05de-0xffff957ead1c05df @offset=1502. First byte 0x1a instead of 0xbb INFO: Slab 0xffffef3950b47000 objects=170 used=170 fp=0x0000000000000000 flags=0x8000000000000200 INFO: Object 0xffff957ead1c05d8 @offset=1496 fp=0xffff957ead1c0620 Redzone (____ptrval____): bb bb bb bb bb bb bb bb ........ Object (____ptrval____): 00 00 00 00 00 f6 f4 a5 ........ Redzone (____ptrval____): 40 1d e8 1a aa @.... Padding (____ptrval____): 00 00 00 00 00 00 00 00 ........ Adjust the offset to stay within s->object_size. (Note that no caches of in this size range are known to exist in the kernel currently.) | 2024-05-21 | not yet calculated | CVE-2021-47221 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst refcnt when egressing The egress tunnel code uses dst_clone() and directly sets the result which is wrong because the entry might have 0 refcnt or be already deleted, causing number of problems. It also triggers the WARN_ON() in dst_hold()[1] when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and checking if a reference was actually taken before setting the dst. [1] dmesg WARN_ON log and following refcnt errors WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401 FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0 Call Trace: br_handle_vlan+0xbc/0xca [bridge] __br_forward+0x23/0x164 [bridge] deliver_clone+0x41/0x48 [bridge] br_handle_frame_finish+0x36f/0x3aa [bridge] ? skb_dst+0x2e/0x38 [bridge] ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge] ? br_handle_frame_finish+0x3aa/0x3aa [bridge] br_handle_frame+0x2c3/0x377 [bridge] ? __skb_pull+0x33/0x51 ? vlan_do_receive+0x4f/0x36a ? br_handle_frame_finish+0x3aa/0x3aa [bridge] __netif_receive_skb_core+0x539/0x7c6 ? __list_del_entry_valid+0x16e/0x1c2 __netif_receive_skb_list_core+0x6d/0xd6 netif_receive_skb_list_internal+0x1d9/0x1fa gro_normal_list+0x22/0x3e dev_gro_receive+0x55b/0x600 ? detach_buf_split+0x58/0x140 napi_gro_receive+0x94/0x12e virtnet_poll+0x15d/0x315 [virtio_net] __napi_poll+0x2c/0x1c9 net_rx_action+0xe6/0x1fb __do_softirq+0x115/0x2d8 run_ksoftirqd+0x18/0x20 smpboot_thread_fn+0x183/0x19c ? smpboot_unregister_percpu_thread+0x66/0x66 kthread+0x10a/0x10f ? kthread_mod_delayed_work+0xb6/0xb6 ret_from_fork+0x22/0x30 ---[ end trace 49f61b07f775fd2b ]--- dst_release: dst:00000000c02d677a refcnt:-1 dst_release underflow | 2024-05-21 | not yet calculated | CVE-2021-47222 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst null pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking. Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path. | 2024-05-21 | not yet calculated | CVE-2021-47223 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: ll_temac: Make sure to free skb when it is completely used With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the first BD of a multi TX BD packet is seen as completed in xmit_done, and the remaining BDs are still being processed. | 2024-05-21 | not yet calculated | CVE-2021-47224 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mac80211: fix deadlock in AP/VLAN handling Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we can't easily fix this case since cfg80211 already calls us with the wiphy mutex held, but change_interface() is relatively rare in drivers anyway, so changing iftype isn't used much (and userspace has to fall back to down/change/up anyway) 2) pull the dev_close() loop over VLANs out of the wiphy mutex section in the normal stop case | 2024-05-21 | not yet calculated | CVE-2021-47225 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer Both Intel and AMD consider it to be architecturally valid for XRSTOR to fail with #PF but nonetheless change the register state. The actual conditions under which this might occur are unclear [1], but it seems plausible that this might be triggered if one sibling thread unmaps a page and invalidates the shared TLB while another sibling thread is executing XRSTOR on the page in question. __fpu__restore_sig() can execute XRSTOR while the hardware registers are preserved on behalf of a different victim task (using the fpu_fpregs_owner_ctx mechanism), and, in theory, XRSTOR could fail but modify the registers. If this happens, then there is a window in which __fpu__restore_sig() could schedule out and the victim task could schedule back in without reloading its own FPU registers. This would result in part of the FPU state that __fpu__restore_sig() was attempting to load leaking into the victim task's user-visible state. Invalidate preserved FPU registers on XRSTOR failure to prevent this situation from corrupting any state. [1] Frequent readers of the errata lists might imagine "complex microarchitectural conditions". | 2024-05-21 | not yet calculated | CVE-2021-47226 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Prevent state corruption in __fpu__restore_sig() The non-compacted slowpath uses __copy_from_user() and copies the entire user buffer into the kernel buffer, verbatim. This means that the kernel buffer may now contain entirely invalid state on which XRSTOR will #GP. validate_user_xstate_header() can detect some of that corruption, but that leaves the onus on callers to clear the buffer. Prior to XSAVES support, it was possible just to reinitialize the buffer, completely, but with supervisor states that is not longer possible as the buffer clearing code split got it backwards. Fixing that is possible but not corrupting the state in the first place is more robust. Avoid corruption of the kernel XSAVE buffer by using copy_user_to_xstate() which validates the XSAVE header contents before copying the actual states to the kernel. copy_user_to_xstate() was previously only called for compacted-format kernel buffers, but it works for both compacted and non-compacted forms. Using it for the non-compacted form is slower because of multiple __copy_from_user() operations, but that cost is less important than robust code in an already slow path. [ Changelog polished by Dave Hansen ] | 2024-05-21 | not yet calculated | CVE-2021-47227 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: x86/ioremap: Map EFI-reserved memory as encrypted for SEV Some drivers require memory that is marked as EFI boot services data. In order for this memory to not be re-used by the kernel after ExitBootServices(), efi_mem_reserve() is used to preserve it by inserting a new EFI memory descriptor and marking it with the EFI_MEMORY_RUNTIME attribute. Under SEV, memory marked with the EFI_MEMORY_RUNTIME attribute needs to be mapped encrypted by Linux, otherwise the kernel might crash at boot like below: EFI Variables Facility v0.08 2004-May-17 general protection fault, probably for non-canonical address 0x3597688770a868b2: 0000 [#1] SMP NOPTI CPU: 13 PID: 1 Comm: swapper/0 Not tainted 5.12.4-2-default #1 openSUSE Tumbleweed Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:efi_mokvar_entry_next [...] Call Trace: efi_mokvar_sysfs_init ? efi_mokvar_table_init do_one_initcall ? __kmalloc kernel_init_freeable ? rest_init kernel_init ret_from_fork Expand the __ioremap_check_other() function to additionally check for this other type of boot data reserved at runtime and indicate that it should be mapped encrypted for an SEV guest. [ bp: Massage commit message. ] | 2024-05-21 | not yet calculated | CVE-2021-47228 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: PCI: aardvark: Fix kernel panic during PIO transfer Trying to start a new PIO transfer by writing value 0 in PIO_START register when previous transfer has not yet completed (which is indicated by value 1 in PIO_START) causes an External Abort on CPU, which results in kernel panic: SError Interrupt on CPU0, code 0xbf000002 -- SError Kernel panic - not syncing: Asynchronous SError Interrupt To prevent kernel panic, it is required to reject a new PIO transfer when previous one has not finished yet. If previous PIO transfer is not finished yet, the kernel may issue a new PIO request only if the previous PIO transfer timed out. In the past the root cause of this issue was incorrectly identified (as it often happens during link retraining or after link down event) and special hack was implemented in Trusted Firmware to catch all SError events in EL3, to ignore errors with code 0xbf000002 and not forwarding any other errors to kernel and instead throw panic from EL3 Trusted Firmware handler. Links to discussion and patches about this issue: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 But the real cause was the fact that during link retraining or after link down event the PIO transfer may take longer time, up to the 1.44s until it times out. This increased probability that a new PIO transfer would be issued by kernel while previous one has not finished yet. After applying this change into the kernel, it is possible to revert the mentioned TF-A hack and SError events do not have to be caught in TF-A EL3. | 2024-05-21 | not yet calculated | CVE-2021-47229 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Immediately reset the MMU context when the SMM flag is cleared Immediately reset the MMU context when the vCPU's SMM flag is cleared so that the SMM flag in the MMU role is always synchronized with the vCPU's flag. If RSM fails (which isn't correctly emulated), KVM will bail without calling post_leave_smm() and leave the MMU in a bad state. The bad MMU role can lead to a NULL pointer dereference when grabbing a shadow page's rmap for a page fault as the initial lookups for the gfn will happen with the vCPU's SMM flag (=0), whereas the rmap lookup will use the shadow page's SMM flag, which comes from the MMU (=1). SMM has an entirely different set of memslots, and so the initial lookup can find a memslot (SMM=0) and then explode on the rmap memslot lookup (SMM=1). general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 8410 Comm: syz-executor382 Not tainted 5.13.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__gfn_to_rmap arch/x86/kvm/mmu/mmu.c:935 [inline] RIP: 0010:gfn_to_rmap+0x2b0/0x4d0 arch/x86/kvm/mmu/mmu.c:947 Code: <42> 80 3c 20 00 74 08 4c 89 ff e8 f1 79 a9 00 4c 89 fb 4d 8b 37 44 RSP: 0018:ffffc90000ffef98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888015b9f414 RCX: ffff888019669c40 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffff811d9cdb R09: ffffed10065a6002 R10: ffffed10065a6002 R11: 0000000000000000 R12: dffffc0000000000 R13: 0000000000000003 R14: 0000000000000001 R15: 0000000000000000 FS: 000000000124b300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000028e31000 CR4: 00000000001526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rmap_add arch/x86/kvm/mmu/mmu.c:965 [inline] mmu_set_spte+0x862/0xe60 arch/x86/kvm/mmu/mmu.c:2604 __direct_map arch/x86/kvm/mmu/mmu.c:2862 [inline] direct_page_fault+0x1f74/0x2b70 arch/x86/kvm/mmu/mmu.c:3769 kvm_mmu_do_page_fault arch/x86/kvm/mmu.h:124 [inline] kvm_mmu_page_fault+0x199/0x1440 arch/x86/kvm/mmu/mmu.c:5065 vmx_handle_exit+0x26/0x160 arch/x86/kvm/vmx/vmx.c:6122 vcpu_enter_guest+0x3bdd/0x9630 arch/x86/kvm/x86.c:9428 vcpu_run+0x416/0xc20 arch/x86/kvm/x86.c:9494 kvm_arch_vcpu_ioctl_run+0x4e8/0xa40 arch/x86/kvm/x86.c:9722 kvm_vcpu_ioctl+0x70f/0xbb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3460 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:1069 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:1055 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x440ce9 | 2024-05-21 | not yet calculated | CVE-2021-47230 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: fix memory leak in mcba_usb Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 2024-05-21 | not yet calculated | CVE-2021-47231 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix Use-after-Free, hold skb ref while in use This patch fixes a Use-after-Free found by the syzbot. The problem is that a skb is taken from the per-session skb queue, without incrementing the ref count. This leads to a Use-after-Free if the skb is taken concurrently from the session queue due to a CTS. | 2024-05-21 | not yet calculated | CVE-2021-47232 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULL devm_gpiod_get_array_optional may return NULL if no GPIO was assigned. | 2024-05-21 | not yet calculated | CVE-2021-47233 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() Use clk_disable_unprepare() in the error path of mtk_phy_init() to fix some resource leaks. | 2024-05-21 | not yet calculated | CVE-2021-47234 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: fix potential use-after-free in ec_bhf_remove static void ec_bhf_remove(struct pci_dev *dev) { ... struct ec_bhf_priv *priv = netdev_priv(net_dev); unregister_netdev(net_dev); free_netdev(net_dev); pci_iounmap(dev, priv->dma_io); pci_iounmap(dev, priv->io); ... } priv is netdev private data, but it is used after free_netdev(). It can cause use-after-free when accessing priv pointer. So, fix it by moving free_netdev() after pci_iounmap() calls. | 2024-05-21 | not yet calculated | CVE-2021-47235 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: cdc_eem: fix tx fixup skb leak when usbnet transmit a skb, eem fixup it in eem_tx_fixup(), if skb_copy_expand() failed, it return NULL, usbnet_start_xmit() will have no chance to free original skb. fix it by free orginal skb in eem_tx_fixup() first, then check skb clone status, if failed, return NULL to usbnet. | 2024-05-21 | not yet calculated | CVE-2021-47236 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: hamradio: fix memory leak in mkiss_close My local syzbot instance hit memory leak in mkiss_open()[1]. The problem was in missing free_netdev() in mkiss_close(). In mkiss_open() netdevice is allocated and then registered, but in mkiss_close() netdevice was only unregistered, but not freed. Fail log: BUG: memory leak unreferenced object 0xffff8880281ba000 (size 4096): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 61 78 30 00 00 00 00 00 00 00 00 00 00 00 00 00 ax0............. 00 27 fa 2a 80 88 ff ff 00 00 00 00 00 00 00 00 .'.*............ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706e7e8>] alloc_netdev_mqs+0x98/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880141a9a00 (size 96): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): e8 a2 1b 28 80 88 ff ff e8 a2 1b 28 80 88 ff ff ...(.......(.... 98 92 9c aa b0 40 02 00 00 00 00 00 00 00 00 00 .....@.......... backtrace: [<ffffffff8709f68b>] __hw_addr_create_ex+0x5b/0x310 [<ffffffff8709fb38>] __hw_addr_add_ex+0x1f8/0x2b0 [<ffffffff870a0c7b>] dev_addr_init+0x10b/0x1f0 [<ffffffff8706e88b>] alloc_netdev_mqs+0x13b/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff8880219bfc00 (size 512): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 a0 1b 28 80 88 ff ff 80 8f b1 8d ff ff ff ff ...(............ 80 8f b1 8d ff ff ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706eec7>] alloc_netdev_mqs+0x777/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae BUG: memory leak unreferenced object 0xffff888029b2b200 (size 256): comm "syz-executor.1", pid 11443, jiffies 4295046091 (age 17.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a27201>] kvmalloc_node+0x61/0xf0 [<ffffffff8706f062>] alloc_netdev_mqs+0x912/0xe80 [<ffffffff84e64192>] mkiss_open+0xb2/0x6f0 [1] [<ffffffff842355db>] tty_ldisc_open+0x9b/0x110 [<ffffffff84236488>] tty_set_ldisc+0x2e8/0x670 [<ffffffff8421f7f3>] tty_ioctl+0xda3/0x1440 [<ffffffff81c9f273>] __x64_sys_ioctl+0x193/0x200 [<ffffffff8911263a>] do_syscall_64+0x3a/0xb0 [<ffffffff89200068>] entry_SYSCALL_64_after_hwframe+0x44/0xae | 2024-05-21 | not yet calculated | CVE-2021-47237 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in ip_mc_add1_src BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline] [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline] [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095 [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416 [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline] [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423 [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857 [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117 [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline] [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline] [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125 [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47 [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In commit 24803f38a5c0 ("igmp: do not remove igmp souce list info when set link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed, because it was also called in igmpv3_clear_delrec(). Rough callgraph: inetdev_destroy -> ip_mc_destroy_dev -> igmpv3_clear_delrec -> ip_mc_clear_src -> RCU_INIT_POINTER(dev->ip_ptr, NULL) However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through inetdev_by_index() and then in_dev->mc_list->sources cannot be released by ip_mc_del1_src() in the sock_close. Rough call sequence goes like: sock_close -> __sock_release -> inet_release -> ip_mc_drop_socket -> inetdev_by_index -> ip_mc_leave_src -> ip_mc_del_src -> ip_mc_del1_src So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free in_dev->mc_list->sources. | 2024-05-21 | not yet calculated | CVE-2021-47238 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: usb: fix possible use-after-free in smsc75xx_bind The commit 46a8b29c6306 ("net: usb: fix memory leak in smsc75xx_bind") fails to clean up the work scheduled in smsc75xx_reset-> smsc75xx_set_multicast, which leads to use-after-free if the work is scheduled to start after the deallocation. In addition, this patch also removes a dangling pointer - dev->data[0]. This patch calls cancel_work_sync to cancel the scheduled work and set the dangling pointer to NULL. | 2024-05-21 | not yet calculated | CVE-2021-47239 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix OOB Read in qrtr_endpoint_post Syzbot reported slab-out-of-bounds Read in qrtr_endpoint_post. The problem was in wrong _size_ type: if (len != ALIGN(size, 4) + hdrlen) goto err; If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293 in header this check won't fail and skb_put_data(skb, data + hdrlen, size); will read out of bound from data, which is hdrlen allocated block. | 2024-05-21 | not yet calculated | CVE-2021-47240 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ethtool: strset: fix message length calculation Outer nest for ETHTOOL_A_STRSET_STRINGSETS is not accounted for. This may result in ETHTOOL_MSG_STRSET_GET producing a warning like: calculated message payload length (684) not sufficient WARNING: CPU: 0 PID: 30967 at net/ethtool/netlink.c:369 ethnl_default_doit+0x87a/0xa20 and a splat. As usually with such warnings three conditions must be met for the warning to trigger: - there must be no skb size rounding up (e.g. reply_size of 684); - string set must be per-device (so that the header gets populated); - the device name must be at least 12 characters long. all in all with current user space it looks like reading priv flags is the only place this could potentially happen. Or with syzbot :) | 2024-05-21 | not yet calculated | CVE-2021-47241 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix soft lookup in subflow_error_report() Maxim reported a soft lookup in subflow_error_report(): watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] RIP: 0010:native_queued_spin_lock_slowpath RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700 FS: 0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_bh subflow_error_report mptcp_subflow_data_available __mptcp_move_skbs_from_subflow mptcp_data_ready tcp_data_queue tcp_rcv_established tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish __netif_receive_skb_one_core netif_receive_skb rtl8139_poll 8139too __napi_poll net_rx_action __do_softirq __irq_exit_rcu common_interrupt </IRQ> The calling function - mptcp_subflow_data_available() - can be invoked from different contexts: - plain ssk socket lock - ssk socket lock + mptcp_data_lock - ssk socket lock + mptcp_data_lock + msk socket lock. Since subflow_error_report() tries to acquire the mptcp_data_lock, the latter two call chains will cause soft lookup. This change addresses the issue moving the error reporting call to outer functions, where the held locks list is known and the we can acquire only the needed one. | 2024-05-21 | not yet calculated | CVE-2021-47242 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: sch_cake: Fix out of bounds when parsing TCP options and header The TCP option parser in cake qdisc (cake_get_tcpopt and cake_tcph_may_drop) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added doff validation in cake_get_tcphdr to avoid parsing garbage as TCP header. Although it wasn't strictly an out-of-bounds access (memory was allocated), garbage values could be read where CAKE expected the TCP header if doff was smaller than 5. | 2024-05-21 | not yet calculated | CVE-2021-47243 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix out of bounds when parsing TCP options The TCP option parser in mptcp (mptcp_get_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). | 2024-05-21 | not yet calculated | CVE-2021-47244 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: Fix out of bounds when parsing TCP options The TCP option parser in synproxy (synproxy_parse_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added an early return when length < 0 to avoid calling skb_header_pointer with negative length. | 2024-05-21 | not yet calculated | CVE-2021-47245 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix page reclaim for dead peer hairpin When adding a hairpin flow, a firmware-side send queue is created for the peer net device, which claims some host memory pages for its internal ring buffer. If the peer net device is removed/unbound before the hairpin flow is deleted, then the send queue is not destroyed which leads to a stack trace on pci device remove: [ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource [ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110 [ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0 [ 748.002171] ------------[ cut here ]------------ [ 748.001177] FW pages counter is 4 after reclaiming all pages [ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core] [ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1 [ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core] [ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9 [ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286 [ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000 [ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51 [ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8 [ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30 [ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000 [ 748.001429] FS: 00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000 [ 748.001695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0 [ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 748.001654] Call Trace: [ 748.000576] ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core] [ 748.001416] ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core] [ 748.001354] ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core] [ 748.001203] mlx5_function_teardown+0x30/0x60 [mlx5_core] [ 748.001275] mlx5_uninit_one+0xa7/0xc0 [mlx5_core] [ 748.001200] remove_one+0x5f/0xc0 [mlx5_core] [ 748.001075] pci_device_remove+0x9f/0x1d0 [ 748.000833] device_release_driver_internal+0x1e0/0x490 [ 748.001207] unbind_store+0x19f/0x200 [ 748.000942] ? sysfs_file_ops+0x170/0x170 [ 748.001000] kernfs_fop_write_iter+0x2bc/0x450 [ 748.000970] new_sync_write+0x373/0x610 [ 748.001124] ? new_sync_read+0x600/0x600 [ 748.001057] ? lock_acquire+0x4d6/0x700 [ 748.000908] ? lockdep_hardirqs_on_prepare+0x400/0x400 [ 748.001126] ? fd_install+0x1c9/0x4d0 [ 748.000951] vfs_write+0x4d0/0x800 [ 748.000804] ksys_write+0xf9/0x1d0 [ 748.000868] ? __x64_sys_read+0xb0/0xb0 [ 748.000811] ? filp_open+0x50/0x50 [ 748.000919] ? syscall_enter_from_user_mode+0x1d/0x50 [ 748.001223] do_syscall_64+0x3f/0x80 [ 748.000892] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 748.00 ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47246 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free of encap entry in neigh update handler Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock removal from TC filter update path and properly handle concurrent encap entry insertion/deletion which can lead to following use-after-free: [23827.464923] ================================================================== [23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635 [23827.472251] [23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5 [23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [23827.476731] Call Trace: [23827.477260] dump_stack+0xbb/0x107 [23827.477906] print_address_description.constprop.0+0x18/0x140 [23827.478896] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.479879] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.480905] kasan_report.cold+0x7c/0xd8 [23827.481701] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.482744] kasan_check_range+0x145/0x1a0 [23827.493112] mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.494054] ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core] [23827.495296] mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core] [23827.496338] ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core] [23827.497486] ? read_word_at_a_time+0xe/0x20 [23827.498250] ? strscpy+0xa0/0x2a0 [23827.498889] process_one_work+0x8ac/0x14e0 [23827.499638] ? lockdep_hardirqs_on_prepare+0x400/0x400 [23827.500537] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [23827.501359] ? rwlock_bug.part.0+0x90/0x90 [23827.502116] worker_thread+0x53b/0x1220 [23827.502831] ? process_one_work+0x14e0/0x14e0 [23827.503627] kthread+0x328/0x3f0 [23827.504254] ? _raw_spin_unlock_irq+0x24/0x40 [23827.505065] ? __kthread_bind_mask+0x90/0x90 [23827.505912] ret_from_fork+0x1f/0x30 [23827.506621] [23827.506987] Allocated by task 28248: [23827.507694] kasan_save_stack+0x1b/0x40 [23827.508476] __kasan_kmalloc+0x7c/0x90 [23827.509197] mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core] [23827.510194] mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core] [23827.511218] __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core] [23827.512234] mlx5e_configure_flower+0x191c/0x4870 [mlx5_core] [23827.513298] tc_setup_cb_add+0x1d5/0x420 [23827.514023] fl_hw_replace_filter+0x382/0x6a0 [cls_flower] [23827.514975] fl_change+0x2ceb/0x4a51 [cls_flower] [23827.515821] tc_new_tfilter+0x89a/0x2070 [23827.516548] rtnetlink_rcv_msg+0x644/0x8c0 [23827.517300] netlink_rcv_skb+0x11d/0x340 [23827.518021] netlink_unicast+0x42b/0x700 [23827.518742] netlink_sendmsg+0x743/0xc20 [23827.519467] sock_sendmsg+0xb2/0xe0 [23827.520131] ____sys_sendmsg+0x590/0x770 [23827.520851] ___sys_sendmsg+0xd8/0x160 [23827.521552] __sys_sendmsg+0xb7/0x140 [23827.522238] do_syscall_64+0x3a/0x70 [23827.522907] entry_SYSCALL_64_after_hwframe+0x44/0xae [23827.523797] [23827.524163] Freed by task 25948: [23827.524780] kasan_save_stack+0x1b/0x40 [23827.525488] kasan_set_track+0x1c/0x30 [23827.526187] kasan_set_free_info+0x20/0x30 [23827.526968] __kasan_slab_free+0xed/0x130 [23827.527709] slab_free_freelist_hook+0xcf/0x1d0 [23827.528528] kmem_cache_free_bulk+0x33a/0x6e0 [23827.529317] kfree_rcu_work+0x55f/0xb70 [23827.530024] process_one_work+0x8ac/0x14e0 [23827.530770] worker_thread+0x53b/0x1220 [23827.531480] kthread+0x328/0x3f0 [23827.532114] ret_from_fork+0x1f/0x30 [23827.532785] [23827.533147] Last potentially related work creation: [23827.534007] kasan_save_stack+0x1b/0x40 [23827.534710] kasan_record_aux_stack+0xab/0xc0 [23827.535492] kvfree_call_rcu+0x31/0x7b0 [23827.536206] mlx5e_tc_del ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47247 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: udp: fix race between close() and udp_abort() Kaustubh reported and diagnosed a panic in udp_lib_lookup(). The root cause is udp_abort() racing with close(). Both racing functions acquire the socket lock, but udp{v6}_destroy_sock() release it before performing destructive actions. We can't easily extend the socket lock scope to avoid the race, instead use the SOCK_DEAD flag to prevent udp_abort from doing any action when the critical race happens. Diagnosed-and-tested-by: Kaustubh Pandey <kapandey@codeaurora.org> | 2024-05-21 | not yet calculated | CVE-2021-47248 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: rds: fix memory leak in rds_recvmsg Syzbot reported memory leak in rds. The problem was in unputted refcount in case of error. int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int msg_flags) { ... if (!rds_next_incoming(rs, &inc)) { ... } After this "if" inc refcount incremented and if (rds_cmsg_recv(inc, msg, rs)) { ret = -EFAULT; goto out; } ... out: return ret; } in case of rds_cmsg_recv() fail the refcount won't be decremented. And it's easy to see from ftrace log, that rds_inc_addref() don't have rds_inc_put() pair in rds_recvmsg() after rds_cmsg_recv() 1) | rds_recvmsg() { 1) 3.721 us | rds_inc_addref(); 1) 3.853 us | rds_message_inc_copy_to_user(); 1) + 10.395 us | rds_cmsg_recv(); 1) + 34.260 us | } | 2024-05-21 | not yet calculated | CVE-2021-47249 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: ipv4: fix memory leak in netlbl_cipsov4_add_std Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888105df7000 (size 64): comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline] [<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline] [<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline] [<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416 [<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739 [<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800 [<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 [<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae The memory of doi_def->map.std pointing is allocated in netlbl_cipsov4_add_std, but no place has freed it. It should be freed in cipso_v4_doi_free which frees the cipso DOI resource. | 2024-05-21 | not yet calculated | CVE-2021-47250 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mac80211: fix skb length check in ieee80211_scan_rx() Replace hard-coded compile-time constants for header length check with dynamic determination based on the frame type. Otherwise, we hit a validation WARN_ON in cfg80211 later. [style fixes, reword commit message] | 2024-05-21 | not yet calculated | CVE-2021-47251 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid WARN_ON timing related checks The soft/batadv interface for a queued OGM can be changed during the time the OGM was queued for transmission and when the OGM is actually transmitted by the worker. But WARN_ON must be used to denote kernel bugs and not to print simple warnings. A warning can simply be printed using pr_warn. | 2024-05-21 | not yet calculated | CVE-2021-47252 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential memory leak in DMUB hw_init [Why] On resume we perform DMUB hw_init which allocates memory: dm_resume->dm_dmub_hw_init->dc_dmub_srv_create->kzalloc That results in memory leak in suspend/resume scenarios. [How] Allocate memory for the DC wrapper to DMUB only if it was not allocated before. No need to reallocate it on suspend/resume. | 2024-05-21 | not yet calculated | CVE-2021-47253 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in gfs2_glock_shrink_scan The GLF_LRU flag is checked under lru_lock in gfs2_glock_remove_from_lru() to remove the glock from the lru list in __gfs2_glock_put(). On the shrink scan path, the same flag is cleared under lru_lock but because of cond_resched_lock(&lru_lock) in gfs2_dispose_glock_lru(), progress on the put side can be made without deleting the glock from the lru list. Keep GLF_LRU across the race window opened by cond_resched_lock(&lru_lock) to ensure correct behavior on both sides - clear GLF_LRU after list_del under lru_lock. | 2024-05-21 | not yet calculated | CVE-2021-47254 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: kvm: LAPIC: Restore guard to prevent illegal APIC register access Per the SDM, "any access that touches bytes 4 through 15 of an APIC register may cause undefined behavior and must not be executed." Worse, such an access in kvm_lapic_reg_read can result in a leak of kernel stack contents. Prior to commit 01402cf81051 ("kvm: LAPIC: write down valid APIC registers"), such an access was explicitly disallowed. Restore the guard that was removed in that commit. | 2024-05-21 | not yet calculated | CVE-2021-47255 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: make sure wait for page writeback in memory_failure Our syzkaller trigger the "BUG_ON(!list_empty(&inode->i_wb_list))" in clear_inode: kernel BUG at fs/inode.c:519! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: Process syz-executor.0 (pid: 249, stack limit = 0x00000000a12409d7) CPU: 1 PID: 249 Comm: syz-executor.0 Not tainted 4.19.95 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : clear_inode+0x280/0x2a8 lr : clear_inode+0x280/0x2a8 Call trace: clear_inode+0x280/0x2a8 ext4_clear_inode+0x38/0xe8 ext4_free_inode+0x130/0xc68 ext4_evict_inode+0xb20/0xcb8 evict+0x1a8/0x3c0 iput+0x344/0x460 do_unlinkat+0x260/0x410 __arm64_sys_unlinkat+0x6c/0xc0 el0_svc_common+0xdc/0x3b0 el0_svc_handler+0xf8/0x160 el0_svc+0x10/0x218 Kernel panic - not syncing: Fatal exception A crash dump of this problem show that someone called __munlock_pagevec to clear page LRU without lock_page: do_mmap -> mmap_region -> do_munmap -> munlock_vma_pages_range -> __munlock_pagevec. As a result memory_failure will call identify_page_state without wait_on_page_writeback. And after truncate_error_page clear the mapping of this page. end_page_writeback won't call sb_clear_inode_writeback to clear inode->i_wb_list. That will trigger BUG_ON in clear_inode! Fix it by checking PageWriteback too to help determine should we skip wait_on_page_writeback. | 2024-05-21 | not yet calculated | CVE-2021-47256 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: fix null deref in parse dev addr Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type. | 2024-05-21 | not yet calculated | CVE-2021-47257 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix error handling of scsi_host_alloc() After device is initialized via device_initialize(), or its name is set via dev_set_name(), the device has to be freed via put_device(). Otherwise device name will be leaked because it is allocated dynamically in dev_set_name(). Fix the leak by replacing kfree() with put_device(). Since scsi_host_dev_release() properly handles IDA and kthread removal, remove special-casing these from the error handling as well. | 2024-05-21 | not yet calculated | CVE-2021-47258 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: NFS: Fix use-after-free in nfs4_init_client() KASAN reports a use-after-free when attempting to mount two different exports through two different NICs that belong to the same server. Olga was able to hit this with kernels starting somewhere between 5.7 and 5.10, but I traced the patch that introduced the clear_bit() call to 4.13. So something must have changed in the refcounting of the clp pointer to make this call to nfs_put_client() the very last one. | 2024-05-21 | not yet calculated | CVE-2021-47259 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a potential NULL dereference in nfs_get_client() None of the callers are expecting NULL returns from nfs_get_client() so this code will lead to an Oops. It's better to return an error pointer. I expect that this is dead code so hopefully no one is affected. | 2024-05-21 | not yet calculated | CVE-2021-47260 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix initializing CQ fragments buffer The function init_cq_frag_buf() can be called to initialize the current CQ fragments buffer cq->buf, or the temporary cq->resize_buf that is filled during CQ resize operation. However, the offending commit started to use function get_cqe() for getting the CQEs, the issue with this change is that get_cqe() always returns CQEs from cq->buf, which leads us to initialize the wrong buffer, and in case of enlarging the CQ we try to access elements beyond the size of the current cq->buf and eventually hit a kernel panic. [exception RIP: init_cq_frag_buf+103] [ffff9f799ddcbcd8] mlx5_ib_resize_cq at ffffffffc0835d60 [mlx5_ib] [ffff9f799ddcbdb0] ib_resize_cq at ffffffffc05270df [ib_core] [ffff9f799ddcbdc0] llt_rdma_setup_qp at ffffffffc0a6a712 [llt] [ffff9f799ddcbe10] llt_rdma_cc_event_action at ffffffffc0a6b411 [llt] [ffff9f799ddcbe98] llt_rdma_client_conn_thread at ffffffffc0a6bb75 [llt] [ffff9f799ddcbec8] kthread at ffffffffa66c5da1 [ffff9f799ddcbf50] ret_from_fork_nospec_begin at ffffffffa6d95ddd Fix it by getting the needed CQE by calling mlx5_frag_buf_get_wqe() that takes the correct source buffer as a parameter. | 2024-05-21 | not yet calculated | CVE-2021-47261 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ensure liveliness of nested VM-Enter fail tracepoint message Use the __string() machinery provided by the tracing subystem to make a copy of the string literals consumed by the "nested VM-Enter failed" tracepoint. A complete copy is necessary to ensure that the tracepoint can't outlive the data/memory it consumes and deference stale memory. Because the tracepoint itself is defined by kvm, if kvm-intel and/or kvm-amd are built as modules, the memory holding the string literals defined by the vendor modules will be freed when the module is unloaded, whereas the tracepoint and its data in the ring buffer will live until kvm is unloaded (or "indefinitely" if kvm is built-in). This bug has existed since the tracepoint was added, but was recently exposed by a new check in tracing to detect exactly this type of bug. fmt: '%s%s ' current_buffer: ' vmx_dirty_log_t-140127 [003] .... kvm_nested_vmenter_failed: ' WARNING: CPU: 3 PID: 140134 at kernel/trace/trace.c:3759 trace_check_vprintf+0x3be/0x3e0 CPU: 3 PID: 140134 Comm: less Not tainted 5.13.0-rc1-ce2e73ce600a-req #184 Hardware name: ASUS Q87M-E/Q87M-E, BIOS 1102 03/03/2014 RIP: 0010:trace_check_vprintf+0x3be/0x3e0 Code: <0f> 0b 44 8b 4c 24 1c e9 a9 fe ff ff c6 44 02 ff 00 49 8b 97 b0 20 RSP: 0018:ffffa895cc37bcb0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffa895cc37bd08 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff9766cfad74f8 RBP: ffffffffc0a041d4 R08: ffff9766cfad74f0 R09: ffffa895cc37bad8 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffc0a041d4 R13: ffffffffc0f4dba8 R14: 0000000000000000 R15: ffff976409f2c000 FS: 00007f92fa200740(0000) GS:ffff9766cfac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559bd11b0000 CR3: 000000019fbaa002 CR4: 00000000001726e0 Call Trace: trace_event_printf+0x5e/0x80 trace_raw_output_kvm_nested_vmenter_failed+0x3a/0x60 [kvm] print_trace_line+0x1dd/0x4e0 s_show+0x45/0x150 seq_read_iter+0x2d5/0x4c0 seq_read+0x106/0x150 vfs_read+0x98/0x180 ksys_read+0x5f/0xe0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae | 2024-05-21 | not yet calculated | CVE-2021-47262 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: gpio: wcd934x: Fix shift-out-of-bounds error bit-mask for pins 0 to 4 is BIT(0) to BIT(4) however we ended up with BIT(n - 1) which is not right, and this was caught by below usban check UBSAN: shift-out-of-bounds in drivers/gpio/gpio-wcd934x.c:34:14 | 2024-05-21 | not yet calculated | CVE-2021-47263 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix Null-point-dereference in fmt_single_name() Check the return value of devm_kstrdup() in case of Null-point-dereference. | 2024-05-21 | not yet calculated | CVE-2021-47264 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: RDMA: Verify port when creating flow rule Validate port value provided by the user and with that remove no longer needed validation by the driver. The missing check in the mlx5_ib driver could cause to the below oops. Call trace: _create_flow_rule+0x2d4/0xf28 [mlx5_ib] mlx5_ib_create_flow+0x2d0/0x5b0 [mlx5_ib] ib_uverbs_ex_create_flow+0x4cc/0x624 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xd4/0x150 [ib_uverbs] ib_uverbs_cmd_verbs.isra.7+0xb28/0xc50 [ib_uverbs] ib_uverbs_ioctl+0x158/0x1d0 [ib_uverbs] do_vfs_ioctl+0xd0/0xaf0 ksys_ioctl+0x84/0xb4 __arm64_sys_ioctl+0x28/0xc4 el0_svc_common.constprop.3+0xa4/0x254 el0_svc_handler+0x84/0xa0 el0_svc+0x10/0x26c Code: b9401260 f9615681 51000400 8b001c20 (f9403c1a) | 2024-05-21 | not yet calculated | CVE-2021-47265 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Fix warning caused by destroying non-initial netns After the commit 5ce2dced8e95 ("RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces"), if the IPoIB device is moved to non-initial netns, destroying that netns lets the device vanish instead of moving it back to the initial netns, This is happening because default_device_exit() skips the interfaces due to having rtnl_link_ops set. Steps to reporoduce: ip netns add foo ip link set mlx5_ib0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 704 at net/core/dev.c:11435 netdev_exit+0x3f/0x50 Modules linked in: xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun d fuse CPU: 1 PID: 704 Comm: kworker/u64:3 Tainted: G S W 5.13.0-rc1+ #1 Hardware name: Dell Inc. PowerEdge R630/02C2CP, BIOS 2.1.5 04/11/2016 Workqueue: netns cleanup_net RIP: 0010:netdev_exit+0x3f/0x50 Code: 48 8b bb 30 01 00 00 e8 ef 81 b1 ff 48 81 fb c0 3a 54 a1 74 13 48 8b 83 90 00 00 00 48 81 c3 90 00 00 00 48 39 d8 75 02 5b c3 <0f> 0b 5b c3 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 RSP: 0018:ffffb297079d7e08 EFLAGS: 00010206 RAX: ffff8eb542c00040 RBX: ffff8eb541333150 RCX: 000000008010000d RDX: 000000008010000e RSI: 000000008010000d RDI: ffff8eb440042c00 RBP: ffffb297079d7e48 R08: 0000000000000001 R09: ffffffff9fdeac00 R10: ffff8eb5003be000 R11: 0000000000000001 R12: ffffffffa1545620 R13: ffffffffa1545628 R14: 0000000000000000 R15: ffffffffa1543b20 FS: 0000000000000000(0000) GS:ffff8ed37fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005601b5f4c2e8 CR3: 0000001fc8c10002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ops_exit_list.isra.9+0x36/0x70 cleanup_net+0x234/0x390 process_one_work+0x1cb/0x360 ? process_one_work+0x360/0x360 worker_thread+0x30/0x370 ? process_one_work+0x360/0x360 kthread+0x116/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 To avoid the above warning and later on the kernel panic that could happen on shutdown due to a NULL pointer dereference, make sure to set the netns_refund flag that was introduced by commit 3a5ca857079e ("can: dev: Move device back to init netns on owning netns delete") to properly restore the IPoIB interfaces to the initial netns. | 2024-05-21 | not yet calculated | CVE-2021-47266 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadget panics on 10gbps cabling usb_assign_descriptors() is called with 5 parameters, the last 4 of which are the usb_descriptor_header for: full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps), high-speed (USB2.0 - 480Mbps), super-speed (USB3.0 - 5Gbps), super-speed-plus (USB3.1 - 10Gbps). The differences between full/high/super-speed descriptors are usually substantial (due to changes in the maximum usb block size from 64 to 512 to 1024 bytes and other differences in the specs), while the difference between 5 and 10Gbps descriptors may be as little as nothing (in many cases the same tuning is simply good enough). However if a gadget driver calls usb_assign_descriptors() with a NULL descriptor for super-speed-plus and is then used on a max 10gbps configuration, the kernel will crash with a null pointer dereference, when a 10gbps capable device port + cable + host port combination shows up. (This wouldn't happen if the gadget max-speed was set to 5gbps, but it of course defaults to the maximum, and there's no real reason to artificially limit it) The fix is to simply use the 5gbps descriptor as the 10gbps descriptor, if a 10gbps descriptor wasn't provided. Obviously this won't fix the problem if the 5gbps descriptor is also NULL, but such cases can't be so trivially solved (and any such gadgets are unlikely to be used with USB3 ports any way). | 2024-05-21 | not yet calculated | CVE-2021-47267 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: cancel vdm and state machine hrtimer when unregister tcpm port A pending hrtimer may expire after the kthread_worker of tcpm port is destroyed, see below kernel dump when do module unload, fix it by cancel the 2 hrtimers. [ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880 [ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 111.526594] Mem abort info: [ 111.526597] ESR = 0x96000047 [ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits [ 111.526604] SET = 0, FnV = 0 [ 111.526607] EA = 0, S1PTW = 0 [ 111.526610] Data abort info: [ 111.526612] ISV = 0, ISS = 0x00000047 [ 111.526615] CM = 0, WnR = 1 [ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000 [ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000 [ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci] [ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36 [ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--) [ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390 [ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4 [ 111.526703] sp : ffff800010003e20 [ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180 [ 111.537156] buffer_io_error: 6 callbacks suppressed [ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read [ 111.539932] x27: ffff00017f3801c0 [ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001 [ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0 [ 111.548304] [ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180 [ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read [ 111.554499] [ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000 [ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read [ 111.561218] [ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read [ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040 [ 111.570902] x11: ffff0000c05ac6d8 [ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read [ 111.588978] x10: 0000000000000000 x9 : 0000000000040000 [ 111.588988] x8 : 0000000000000000 [ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read [ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880 [ 111.605777] x5 : ffff00017f384880 [ 111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read [ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184 [ 111.617096] x2 : ffff8000118cb880 [ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read [ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888 [ 111.626938] Call trace: [ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390 [ 111.795809] kthread_queue_work+0x30/0xc0 [ 111.799828] state_machine_timer_handler+0x20/0x30 [ 111.804624] __hrtimer_run_queues+0x140/0x1e0 [ 111.808990] hrtimer_interrupt+0xec/0x2c0 [ 111.813004] arch_timer_handler_phys+0x38/0x50 [ 111.817456] handle_percpu_devid_irq+0x88/0x150 [ 111.821991] __handle_domain_irq+0x80/0xe0 [ 111.826093] gic_handle_irq+0xc0/0x140 [ 111.829848] el1_irq+0xbc/0x154 [ 111.832991] arch_cpu_idle+0x1c/0x2c [ 111.836572] default_idle_call+0x24/0x6c [ 111.840497] do_idle+0x238/0x2ac [ 1 ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47268 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: ep0: fix NULL pointer exception There is no validation of the index from dwc3_wIndex_to_dep() and we might be referring a non-existing ep and trigger a NULL pointer exception. In certain configurations we might use fewer eps and the index might wrongly indicate a larger ep index than existing. By adding this validation from the patch we can actually report a wrong index back to the caller. In our usecase we are using a composite device on an older kernel, but upstream might use this fix also. Unfortunately, I cannot describe the hardware for others to reproduce the issue as it is a proprietary implementation. [ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4 [ 82.966891] Mem abort info: [ 82.969663] ESR = 0x96000006 [ 82.972703] Exception class = DABT (current EL), IL = 32 bits [ 82.978603] SET = 0, FnV = 0 [ 82.981642] EA = 0, S1PTW = 0 [ 82.984765] Data abort info: [ 82.987631] ISV = 0, ISS = 0x00000006 [ 82.991449] CM = 0, WnR = 0 [ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc [ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000 [ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c) [ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1 [ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c [ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94 ... [ 83.141788] Call trace: [ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c [ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94 [ 83.181546] ---[ end trace aac6b5267d84c32f ]--- | 2024-05-21 | not yet calculated | CVE-2021-47269 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: fix various gadgets null ptr deref on 10gbps cabling. This avoids a null pointer dereference in f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm} by simply reusing the 5gbps config for 10gbps. | 2024-05-21 | not yet calculated | CVE-2021-47270 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler Patch fixes the following critical issue caused by deadlock which has been detected during testing NCM class: smp: csd: Detected non-responsive CSD lock (#1) on CPU#0 smp: csd: CSD lock (#1) unresponsive. .... RIP: 0010:native_queued_spin_lock_slowpath+0x61/0x1d0 RSP: 0018:ffffbc494011cde0 EFLAGS: 00000002 RAX: 0000000000000101 RBX: ffff9ee8116b4a68 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494011cde0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: 0000000000000246 R15: ffff9ee8116b4658 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7bcc41a830 CR3: 000000007a612003 CR4: 00000000001706e0 Call Trace: <IRQ> do_raw_spin_lock+0xc0/0xd0 _raw_spin_lock_irqsave+0x95/0xa0 cdnsp_gadget_ep_queue.cold+0x88/0x107 [cdnsp_udc_pci] usb_ep_queue+0x35/0x110 eth_start_xmit+0x220/0x3d0 [u_ether] ncm_tx_timeout+0x34/0x40 [usb_f_ncm] ? ncm_free_inst+0x50/0x50 [usb_f_ncm] __hrtimer_run_queues+0xac/0x440 hrtimer_run_softirq+0x8c/0xb0 __do_softirq+0xcf/0x428 asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x61/0x70 irq_exit_rcu+0xc1/0xd0 sysvec_apic_timer_interrupt+0x52/0xb0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:do_raw_spin_trylock+0x18/0x40 RSP: 0018:ffffbc494138bda8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff9ee8116b4658 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494138bda8 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: ffff9ee7b5c73d80 R15: ffff9ee8116b4000 _raw_spin_lock+0x3d/0x70 ? cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] ? cdnsp_remove_request+0x1f0/0x1f0 [cdnsp_udc_pci] ? cdnsp_thread_irq_handler+0x5/0xa0 [cdnsp_udc_pci] ? irq_thread+0xa0/0x1c0 irq_thread_fn+0x28/0x60 irq_thread+0x105/0x1c0 ? __kthread_parkme+0x42/0x90 ? irq_forced_thread_fn+0x90/0x90 ? wake_threads_waitq+0x30/0x30 ? irq_thread_check_affinity+0xe0/0xe0 kthread+0x12a/0x160 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 The root cause of issue is spin_lock/spin_unlock instruction instead spin_lock_irqsave/spin_lock_irqrestore in cdnsp_thread_irq_handler function. | 2024-05-21 | not yet calculated | CVE-2021-47271 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULL There exists a possible scenario in which dwc3_gadget_init() can fail: during during host -> peripheral mode switch in dwc3_set_mode(), and a pending gadget driver fails to bind. Then, if the DRD undergoes another mode switch from peripheral->host the resulting dwc3_gadget_exit() will attempt to reference an invalid and dangling dwc->gadget pointer as well as call dma_free_coherent() on unmapped DMA pointers. The exact scenario can be reproduced as follows: - Start DWC3 in peripheral mode - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs) - Run FunctionFS userspace application (open EPs, write descriptors, etc) - Bind gadget driver to DWC3's UDC - Switch DWC3 to host mode => dwc3_gadget_exit() is called. usb_del_gadget() will put the ConfigFS driver instance on the gadget_driver_pending_list - Stop FunctionFS application (closes the ep files) - Switch DWC3 to peripheral mode => dwc3_gadget_init() fails as usb_add_gadget() calls check_pending_gadget_drivers() and attempts to rebind the UDC to the ConfigFS gadget but fails with -19 (-ENODEV) because the FFS instance is not in FFS_ACTIVE state (userspace has not re-opened and written the descriptors yet, i.e. desc_ready!=0). - Switch DWC3 back to host mode => dwc3_gadget_exit() is called again, but this time dwc->gadget is invalid. Although it can be argued that userspace should take responsibility for ensuring that the FunctionFS application be ready prior to allowing the composite driver bind to the UDC, failure to do so should not result in a panic from the kernel driver. Fix this by setting dwc->gadget to NULL in the failure path of dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out unless the gadget pointer is valid. | 2024-05-21 | not yet calculated | CVE-2021-47272 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3-meson-g12a: fix usb2 PHY glue init when phy0 is disabled When only PHY1 is used (for example on Odroid-HC4), the regmap init code uses the usb2 ports when doesn't initialize the PHY1 regmap entry. This fixes: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 ... pc : regmap_update_bits_base+0x40/0xa0 lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 ... Call trace: regmap_update_bits_base+0x40/0xa0 dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8 dwc3_meson_g12a_usb2_init+0x7c/0xc8 dwc3_meson_g12a_usb_init+0x28/0x48 dwc3_meson_g12a_probe+0x298/0x540 platform_probe+0x70/0xe0 really_probe+0xf0/0x4d8 driver_probe_device+0xfc/0x168 ... | 2024-05-21 | not yet calculated | CVE-2021-47273 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tracing: Correct the length check which causes memory corruption We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286 [1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX: 0000000006e931bf [1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI: ffff9a45ff004300 [1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09: 0000000000000000 [1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9a20608d [1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15: 696c662f65636976 [1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000) knlGS:0000000000000000 [1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4: 00000000003606e0 [1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1640542.566742] Call Trace: [1640542.567009] anon_vma_clone+0x5d/0x170 [1640542.567417] __split_vma+0x91/0x1a0 [1640542.567777] do_munmap+0x2c6/0x320 [1640542.568128] vm_munmap+0x54/0x70 [1640542.569990] __x64_sys_munmap+0x22/0x30 [1640542.572005] do_syscall_64+0x5b/0x1b0 [1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1640542.575642] RIP: 0033:0x7f45d6e61e27 James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows: [ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000 [ 86.780806] no_context+0xdf/0x3c0 [ 86.784327] __do_page_fault+0x252/0x470 [ 86.788367] do_page_fault+0x32/0x140 [ 86.792145] page_fault+0x1e/0x30 [ 86.795576] strncpy_from_unsafe+0x66/0xb0 [ 86.799789] fetch_memory_string+0x25/0x40 [ 86.804002] fetch_deref_string+0x51/0x60 [ 86.808134] kprobe_trace_func+0x32d/0x3a0 [ 86.812347] kprobe_dispatcher+0x45/0x50 [ 86.816385] kprobe_ftrace_handler+0x90/0xf0 [ 86.820779] ftrace_ops_assist_func+0xa1/0x140 [ 86.825340] 0xffffffffc00750bf [ 86.828603] do_sys_open+0x5/0x1f0 [ 86.832124] do_syscall_64+0x5b/0x1b0 [ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9 commit b220c049d519 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow. | 2024-05-21 | not yet calculated | CVE-2021-47274 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bcache: avoid oversized read request in cache missing code path In the cache missing code path of cached device, if a proper location from the internal B+ tree is matched for a cache miss range, function cached_dev_cache_miss() will be called in cache_lookup_fn() in the following code block, [code block 1] 526 unsigned int sectors = KEY_INODE(k) == s->iop.inode 527 ? min_t(uint64_t, INT_MAX, 528 KEY_START(k) - bio->bi_iter.bi_sector) 529 : INT_MAX; 530 int ret = s->d->cache_miss(b, s, bio, sectors); Here s->d->cache_miss() is the call backfunction pointer initialized as cached_dev_cache_miss(), the last parameter 'sectors' is an important hint to calculate the size of read request to backing device of the missing cache data. Current calculation in above code block may generate oversized value of 'sectors', which consequently may trigger 2 different potential kernel panics by BUG() or BUG_ON() as listed below, 1) BUG_ON() inside bch_btree_insert_key(), [code block 2] 886 BUG_ON(b->ops->is_extents && !KEY_SIZE(k)); 2) BUG() inside biovec_slab(), [code block 3] 51 default: 52 BUG(); 53 return NULL; All the above panics are original from cached_dev_cache_miss() by the oversized parameter 'sectors'. Inside cached_dev_cache_miss(), parameter 'sectors' is used to calculate the size of data read from backing device for the cache missing. This size is stored in s->insert_bio_sectors by the following lines of code, [code block 4] 909 s->insert_bio_sectors = min(sectors, bio_sectors(bio) + reada); Then the actual key inserting to the internal B+ tree is generated and stored in s->iop.replace_key by the following lines of code, [code block 5] 911 s->iop.replace_key = KEY(s->iop.inode, 912 bio->bi_iter.bi_sector + s->insert_bio_sectors, 913 s->insert_bio_sectors); The oversized parameter 'sectors' may trigger panic 1) by BUG_ON() from the above code block. And the bio sending to backing device for the missing data is allocated with hint from s->insert_bio_sectors by the following lines of code, [code block 6] 926 cache_bio = bio_alloc_bioset(GFP_NOWAIT, 927 DIV_ROUND_UP(s->insert_bio_sectors, PAGE_SECTORS), 928 &dc->disk.bio_split); The oversized parameter 'sectors' may trigger panic 2) by BUG() from the agove code block. Now let me explain how the panics happen with the oversized 'sectors'. In code block 5, replace_key is generated by macro KEY(). From the definition of macro KEY(), [code block 7] 71 #define KEY(inode, offset, size) \ 72 ((struct bkey) { \ 73 .high = (1ULL << 63) | ((__u64) (size) << 20) | (inode), \ 74 .low = (offset) \ 75 }) Here 'size' is 16bits width embedded in 64bits member 'high' of struct bkey. But in code block 1, if "KEY_START(k) - bio->bi_iter.bi_sector" is very probably to be larger than (1<<16) - 1, which makes the bkey size calculation in code block 5 is overflowed. In one bug report the value of parameter 'sectors' is 131072 (= 1 << 17), the overflowed 'sectors' results the overflowed s->insert_bio_sectors in code block 4, then makes size field of s->iop.replace_key to be 0 in code block 5. Then the 0- sized s->iop.replace_key is inserted into the internal B+ tree as cache missing check key (a special key to detect and avoid a racing between normal write request and cache missing read request) as, [code block 8] 915 ret = bch_btree_insert_check_key(b, &s->op, &s->iop.replace_key); Then the 0-sized s->iop.replace_key as 3rd parameter triggers the bkey size check BUG_ON() in code block 2, and causes the kernel panic 1). Another ke ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47275 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ftrace: Do not blindly read the ip address in ftrace_bug() It was reported that a bug on arm64 caused a bad ip address to be used for updating into a nop in ftrace_init(), but the error path (rightfully) returned -EINVAL and not -EFAULT, as the bug caused more than one error to occur. But because -EINVAL was returned, the ftrace_bug() tried to report what was at the location of the ip address, and read it directly. This caused the machine to panic, as the ip was not pointing to a valid memory address. Instead, read the ip address with copy_from_kernel_nofault() to safely access the memory, and if it faults, report that the address faulted, otherwise report what was in that location. | 2024-05-21 | not yet calculated | CVE-2021-47276 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: kvm: avoid speculation-based attacks from out-of-range memslot accesses KVM's mechanism for accessing guest memory translates a guest physical address (gpa) to a host virtual address using the right-shifted gpa (also known as gfn) and a struct kvm_memory_slot. The translation is performed in __gfn_to_hva_memslot using the following formula: hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE It is expected that gfn falls within the boundaries of the guest's physical memory. However, a guest can access invalid physical addresses in such a way that the gfn is invalid. __gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot does check that the gfn falls within the boundaries of the guest's physical memory or not, a CPU can speculate the result of the check and continue execution speculatively using an illegal gfn. The speculation can result in calculating an out-of-bounds hva. If the resulting host virtual address is used to load another guest physical address, this is effectively a Spectre gadget consisting of two consecutive reads, the second of which is data dependent on the first. Right now it's not clear if there are any cases in which this is exploitable. One interesting case was reported by the original author of this patch, and involves visiting guest page tables on x86. Right now these are not vulnerable because the hva read goes through get_user(), which contains an LFENCE speculation barrier. However, there are patches in progress for x86 uaccess.h to mask kernel addresses instead of using LFENCE; once these land, a guest could use speculation to read from the VMM's ring 3 address space. Other architectures such as ARM already use the address masking method, and would be susceptible to this same kind of data-dependent access gadgets. Therefore, this patch proactively protects from these attacks by masking out-of-bounds gfns in __gfn_to_hva_memslot, which blocks speculation of invalid hvas. Sean Christopherson noted that this patch does not cover kvm_read_guest_offset_cached. This however is limited to a few bytes past the end of the cache, and therefore it is unlikely to be useful in the context of building a chain of data dependent accesses. | 2024-05-21 | not yet calculated | CVE-2021-47277 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. | 2024-05-21 | not yet calculated | CVE-2021-47278 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: misc: brcmstb-usb-pinmap: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. | 2024-05-21 | not yet calculated | CVE-2021-47279 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm: Fix use-after-free read in drm_getunique() There is a time-of-check-to-time-of-use error in drm_getunique() due to retrieving file_priv->master prior to locking the device's master mutex. An example can be seen in the crash report of the use-after-free error found by Syzbot: https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803 In the report, the master pointer was used after being freed. This is because another process had acquired the device's master mutex in drm_setmaster_ioctl(), then overwrote fpriv->master in drm_new_set_master(). The old value of fpriv->master was subsequently freed before the mutex was unlocked. To fix this, we lock the device's master mutex before retrieving the pointer from from fpriv->master. This patch passes the Syzbot reproducer test. | 2024-05-21 | not yet calculated | CVE-2021-47280 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix race of snd_seq_timer_open() The timer instance per queue is exclusive, and snd_seq_timer_open() should have managed the concurrent accesses. It looks as if it's checking the already existing timer instance at the beginning, but it's not right, because there is no protection, hence any later concurrent call of snd_seq_timer_open() may override the timer instance easily. This may result in UAF, as the leftover timer instance can keep running while the queue itself gets closed, as spotted by syzkaller recently. For avoiding the race, add a proper check at the assignment of tmr->timeri again, and return -EBUSY if it's been already registered. | 2024-05-21 | not yet calculated | CVE-2021-47281 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: spi: bcm2835: Fix out-of-bounds access with more than 4 slaves Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()") limited the number of slaves to 3 at compile-time. The limitation was necessitated by a statically-sized array prepare_cs[] in the driver private data which contains a per-slave register value. The commit sought to enforce the limitation at run-time by setting the controller's num_chipselect to 3: Slaves with a higher chipselect are rejected by spi_add_device(). However the commit neglected that num_chipselect only limits the number of *native* chipselects. If GPIO chipselects are specified in the device tree for more than 3 slaves, num_chipselect is silently raised by of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to the statically-sized array prepare_cs[]. As a bandaid fix which is backportable to stable, raise the number of allowed slaves to 24 (which "ought to be enough for anybody"), enforce the limitation on slave ->setup and revert num_chipselect to 3 (which is the number of native chipselects supported by the controller). An upcoming for-next commit will allow an arbitrary number of slaves. | 2024-05-21 | not yet calculated | CVE-2021-47282 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net:sfc: fix non-freed irq in legacy irq mode SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed... | 2024-05-21 | not yet calculated | CVE-2021-47283 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: netjet: Fix crash in nj_probe: 'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100 ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47284 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/nfc/rawsock.c: fix a permission check bug The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable(). | 2024-05-21 | not yet calculated | CVE-2021-47285 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bus: mhi: core: Validate channel ID when processing command completions MHI reads the channel ID from the event ring element sent by the device which can be any value between 0 and 255. In order to prevent any out of bound accesses, add a check against the maximum number of channels supported by the controller and those channels not configured yet so as to skip processing of that event ring element. | 2024-05-21 | not yet calculated | CVE-2021-47286 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: driver core: auxiliary bus: Fix memory leak when driver_register() fail If driver_register() returns with error we need to free the memory allocated for auxdrv->driver.name before returning from __auxiliary_driver_register() | 2024-05-21 | not yet calculated | CVE-2021-47287 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf() Fix an 11-year old bug in ngene_command_config_free_buf() while addressing the following warnings caught with -Warray-bounds: arch/alpha/include/asm/string.h:22:16: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [12, 16] from the object at 'com' is out of the bounds of referenced subobject 'config' with type 'unsigned char' at offset 10 [-Warray-bounds] The problem is that the original code is trying to copy 6 bytes of data into a one-byte size member _config_ of the wrong structue FW_CONFIGURE_BUFFERS, in a single call to memcpy(). This causes a legitimate compiler warning because memcpy() overruns the length of &com.cmd.ConfigureBuffers.config. It seems that the right structure is FW_CONFIGURE_FREE_BUFFERS, instead, because it contains 6 more members apart from the header _hdr_. Also, the name of the function ngene_command_config_free_buf() suggests that the actual intention is to ConfigureFreeBuffers, instead of ConfigureBuffers (which takes place in the function ngene_command_config_buf(), above). Fix this by enclosing those 6 members of struct FW_CONFIGURE_FREE_BUFFERS into new struct config, and use &com.cmd.ConfigureFreeBuffers.config as the destination address, instead of &com.cmd.ConfigureBuffers.config, when calling memcpy(). This also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). | 2024-05-21 | not yet calculated | CVE-2021-47288 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ACPI: fix NULL pointer dereference Commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer that was possibly NULL. That fails miserably, because that helper inline function is not set up to handle that case. Just make acpi_dev_put() silently accept a NULL pointer, rather than calling down to put_device() with an invalid offset off that NULL pointer. | 2024-05-21 | not yet calculated | CVE-2021-47289 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL dereference on XCOPY completion CPU affinity control added with commit 39ae3edda325 ("scsi: target: core: Make completion affinity configurable") makes target_complete_cmd() queue work on a CPU based on se_tpg->se_tpg_wwn->cmd_compl_affinity state. LIO's EXTENDED COPY worker is a special case in that read/write cmds are dispatched using the global xcopy_pt_tpg, which carries a NULL se_tpg_wwn pointer following initialization in target_xcopy_setup_pt(). The NULL xcopy_pt_tpg->se_tpg_wwn pointer is dereferenced on completion of any EXTENDED COPY initiated read/write cmds. E.g using the libiscsi SCSI.ExtendedCopy.Simple test: BUG: kernel NULL pointer dereference, address: 00000000000001a8 RIP: 0010:target_complete_cmd+0x9d/0x130 [target_core_mod] Call Trace: fd_execute_rw+0x148/0x42a [target_core_file] ? __dynamic_pr_debug+0xa7/0xe0 ? target_check_reservation+0x5b/0x940 [target_core_mod] __target_execute_cmd+0x1e/0x90 [target_core_mod] transport_generic_new_cmd+0x17c/0x330 [target_core_mod] target_xcopy_issue_pt_cmd+0x9/0x60 [target_core_mod] target_xcopy_read_source.isra.7+0x10b/0x1b0 [target_core_mod] ? target_check_fua+0x40/0x40 [target_core_mod] ? transport_complete_task_attr+0x130/0x130 [target_core_mod] target_xcopy_do_work+0x61f/0xc00 [target_core_mod] This fix makes target_complete_cmd() queue work on se_cmd->cpuid if se_tpg_wwn is NULL. | 2024-05-21 | not yet calculated | CVE-2021-47290 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions While running the self-tests on a KASAN enabled kernel, I observed a slab-out-of-bounds splat very similar to the one reported in commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions"). We additionally need to take care of fib6_metrics initialization failure when the caller provides an nh. The fix is similar, explicitly free the route instead of calling fib6_info_release on a half-initialized object. | 2024-05-21 | not yet calculated | CVE-2021-47291 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: io_uring: fix memleak in io_init_wq_offload() I got memory leak report when doing fuzz test: BUG: memory leak unreferenced object 0xffff888107310a80 (size 96): comm "syz-executor.6", pid 4610, jiffies 4295140240 (age 20.135s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... backtrace: [<000000001974933b>] kmalloc include/linux/slab.h:591 [inline] [<000000001974933b>] kzalloc include/linux/slab.h:721 [inline] [<000000001974933b>] io_init_wq_offload fs/io_uring.c:7920 [inline] [<000000001974933b>] io_uring_alloc_task_context+0x466/0x640 fs/io_uring.c:7955 [<0000000039d0800d>] __io_uring_add_tctx_node+0x256/0x360 fs/io_uring.c:9016 [<000000008482e78c>] io_uring_add_tctx_node fs/io_uring.c:9052 [inline] [<000000008482e78c>] __do_sys_io_uring_enter fs/io_uring.c:9354 [inline] [<000000008482e78c>] __se_sys_io_uring_enter fs/io_uring.c:9301 [inline] [<000000008482e78c>] __x64_sys_io_uring_enter+0xabc/0xc20 fs/io_uring.c:9301 [<00000000b875f18f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000b875f18f>] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 [<000000006b0a8484>] entry_SYSCALL_64_after_hwframe+0x44/0xae CPU0 CPU1 io_uring_enter io_uring_enter io_uring_add_tctx_node io_uring_add_tctx_node __io_uring_add_tctx_node __io_uring_add_tctx_node io_uring_alloc_task_context io_uring_alloc_task_context io_init_wq_offload io_init_wq_offload hash = kzalloc hash = kzalloc ctx->hash_map = hash ctx->hash_map = hash <- one of the hash is leaked When calling io_uring_enter() in parallel, the 'hash_map' will be leaked, add uring_lock to protect 'hash_map'. | 2024-05-21 | not yet calculated | CVE-2021-47292 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: Skip non-Ethernet packets Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2 protocol, which is not always the case. As an example, for CAN devices: $ ip link add dev vcan0 type vcan $ ip link set up vcan0 $ tc qdisc add dev vcan0 root handle 1: htb $ tc filter add dev vcan0 parent 1: protocol ip prio 10 \ matchall action skbmod swap mac Doing the above silently corrupts all the packets. Do not perform skbmod actions for non-Ethernet packets. | 2024-05-21 | not yet calculated | CVE-2021-47293 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netrom: Decrease sock refcount when sock timers expire Commit 63346650c1a9 ("netrom: switch to sock timer API") switched to use sock timer API. It replaces mod_timer() by sk_reset_timer(), and del_timer() by sk_stop_timer(). Function sk_reset_timer() will increase the refcount of sock if it is called on an inactive timer, hence, in case the timer expires, we need to decrease the refcount ourselves in the handler, otherwise, the sock refcount will be unbalanced and the sock will never be freed. | 2024-05-21 | not yet calculated | CVE-2021-47294 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: sched: fix memory leak in tcindex_partial_destroy_work Syzbot reported memory leak in tcindex_set_parms(). The problem was in non-freed perfect hash in tcindex_partial_destroy_work(). In tcindex_set_parms() new tcindex_data is allocated and some fields from old one are copied to new one, but not the perfect hash. Since tcindex_partial_destroy_work() is the destroy function for old tcindex_data, we need to free perfect hash to avoid memory leak. | 2024-05-21 | not yet calculated | CVE-2021-47295 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak vcpu_put is not called if the user copy fails. This can result in preempt notifier corruption and crashes, among other issues. | 2024-05-21 | not yet calculated | CVE-2021-47296 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: fix uninit-value in caif_seqpkt_sendmsg When nr_segs equal to zero in iovec_from_user, the object msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg which is defined in ___sys_sendmsg. So we cann't just judge msg->msg_iter.iov->base directlly. We can use nr_segs to judge msg in caif_seqpkt_sendmsg whether has data buffers. ===================================================== BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343 ___sys_sendmsg net/socket.c:2397 [inline] __sys_sendmmsg+0x808/0xc90 net/socket.c:2480 __compat_sys_sendmmsg net/compat.c:656 [inline] | 2024-05-21 | not yet calculated | CVE-2021-47297 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix potential memory leak on unlikely error case If skb_linearize is needed and fails we could leak a msg on the error handling. To fix ensure we kfree the msg block before returning error. Found during code review. | 2024-05-21 | not yet calculated | CVE-2021-47298 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: xdp, net: Fix use-after-free in bpf_xdp_link_release The problem occurs between dev_get_by_index() and dev_xdp_attach_link(). At this point, dev_xdp_uninstall() is called. Then xdp link will not be detached automatically when dev is released. But link->dev already points to dev, when xdp link is released, dev will still be accessed, but dev has been released. dev_get_by_index() | link->dev = dev | | rtnl_lock() | unregister_netdevice_many() | dev_xdp_uninstall() | rtnl_unlock() rtnl_lock(); | dev_xdp_attach_link() | rtnl_unlock(); | | netdev_run_todo() // dev released bpf_xdp_link_release() | /* access dev. | use-after-free */ | [ 45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0 [ 45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732 [ 45.968297] [ 45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22 [ 45.969222] Hardware name: linux,dummy-virt (DT) [ 45.969795] Call trace: [ 45.970106] dump_backtrace+0x0/0x4c8 [ 45.970564] show_stack+0x30/0x40 [ 45.970981] dump_stack_lvl+0x120/0x18c [ 45.971470] print_address_description.constprop.0+0x74/0x30c [ 45.972182] kasan_report+0x1e8/0x200 [ 45.972659] __asan_report_load8_noabort+0x2c/0x50 [ 45.973273] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.973834] bpf_link_free+0xd0/0x188 [ 45.974315] bpf_link_put+0x1d0/0x218 [ 45.974790] bpf_link_release+0x3c/0x58 [ 45.975291] __fput+0x20c/0x7e8 [ 45.975706] ____fput+0x24/0x30 [ 45.976117] task_work_run+0x104/0x258 [ 45.976609] do_notify_resume+0x894/0xaf8 [ 45.977121] work_pending+0xc/0x328 [ 45.977575] [ 45.977775] The buggy address belongs to the page: [ 45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998 [ 45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff) [ 45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000 [ 45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 45.982259] page dumped because: kasan: bad access detected [ 45.982948] [ 45.983153] Memory state around the buggy address: [ 45.983753] ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.984645] ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.986419] ^ [ 45.987112] ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988006] ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988895] ================================================================== [ 45.989773] Disabling lock debugging due to kernel taint [ 45.990552] Kernel panic - not syncing: panic_on_warn set ... [ 45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G B 5.13.0+ #22 [ 45.991929] Hardware name: linux,dummy-virt (DT) [ 45.992448] Call trace: [ 45.992753] dump_backtrace+0x0/0x4c8 [ 45.993208] show_stack+0x30/0x40 [ 45.993627] dump_stack_lvl+0x120/0x18c [ 45.994113] dump_stack+0x1c/0x34 [ 45.994530] panic+0x3a4/0x7d8 [ 45.994930] end_report+0x194/0x198 [ 45.995380] kasan_report+0x134/0x200 [ 45.995850] __asan_report_load8_noabort+0x2c/0x50 [ 45.996453] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.997007] bpf_link_free+0xd0/0x188 [ 45.997474] bpf_link_put+0x1d0/0x218 [ 45.997942] bpf_link_release+0x3c/0x58 [ 45.998429] __fput+0x20c/0x7e8 [ 45.998833] ____fput+0x24/0x30 [ 45.999247] task_work_run+0x104/0x258 [ 45.999731] do_notify_resume+0x894/0xaf8 [ 46.000236] work_pending ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47299 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tail_call_reachable rejection for interpreter when jit failed During testing of f263a81451c1 ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47300 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: igb: Fix use-after-free error during reset Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igb_poll() runs while the controller is reset this can lead to the driver try to free a skb that was already freed. (The crash is harder to reproduce with the igb driver, but the same potential problem exists as the code is identical to igc) | 2024-05-21 | not yet calculated | CVE-2021-47301 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: igc: Fix use-after-free error during reset Cleans the next descriptor to watch (next_to_watch) when cleaning the TX ring. Failure to do so can cause invalid memory accesses. If igc_poll() runs while the controller is being reset this can lead to the driver try to free a skb that was already freed. Log message: [ 101.525242] refcount_t: underflow; use-after-free. [ 101.525251] WARNING: CPU: 1 PID: 646 at lib/refcount.c:28 refcount_warn_saturate+0xab/0xf0 [ 101.525259] Modules linked in: sch_etf(E) sch_mqprio(E) rfkill(E) intel_rapl_msr(E) intel_rapl_common(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) binfmt_misc(E) kvm_intel(E) kvm(E) irqbypass(E) crc32_pclmul(E) ghash_clmulni_intel(E) aesni_intel(E) mei_wdt(E) libaes(E) crypto_simd(E) cryptd(E) glue_helper(E) snd_hda_codec_hdmi(E) rapl(E) intel_cstate(E) snd_hda_intel(E) snd_intel_dspcfg(E) sg(E) soundwire_intel(E) intel_uncore(E) at24(E) soundwire_generic_allocation(E) iTCO_wdt(E) soundwire_cadence(E) intel_pmc_bxt(E) serio_raw(E) snd_hda_codec(E) iTCO_vendor_support(E) watchdog(E) snd_hda_core(E) snd_hwdep(E) snd_soc_core(E) snd_compress(E) snd_pcsp(E) soundwire_bus(E) snd_pcm(E) evdev(E) snd_timer(E) mei_me(E) snd(E) soundcore(E) mei(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) sd_mod(E) t10_pi(E) crc_t10dif(E) crct10dif_generic(E) i915(E) ahci(E) libahci(E) ehci_pci(E) igb(E) xhci_pci(E) ehci_hcd(E) [ 101.525303] drm_kms_helper(E) dca(E) xhci_hcd(E) libata(E) crct10dif_pclmul(E) cec(E) crct10dif_common(E) tsn(E) igc(E) e1000e(E) ptp(E) i2c_i801(E) crc32c_intel(E) psmouse(E) i2c_algo_bit(E) i2c_smbus(E) scsi_mod(E) lpc_ich(E) pps_core(E) usbcore(E) drm(E) button(E) video(E) [ 101.525318] CPU: 1 PID: 646 Comm: irq/37-enp7s0-T Tainted: G E 5.10.30-rt37-tsn1-rt-ipipe #ipipe [ 101.525320] Hardware name: SIEMENS AG SIMATIC IPC427D/A5E31233588, BIOS V17.02.09 03/31/2017 [ 101.525322] RIP: 0010:refcount_warn_saturate+0xab/0xf0 [ 101.525325] Code: 05 31 48 44 01 01 e8 f0 c6 42 00 0f 0b c3 80 3d 1f 48 44 01 00 75 90 48 c7 c7 78 a8 f3 a6 c6 05 0f 48 44 01 01 e8 d1 c6 42 00 <0f> 0b c3 80 3d fe 47 44 01 00 0f 85 6d ff ff ff 48 c7 c7 d0 a8 f3 [ 101.525327] RSP: 0018:ffffbdedc0917cb8 EFLAGS: 00010286 [ 101.525329] RAX: 0000000000000000 RBX: ffff98fd6becbf40 RCX: 0000000000000001 [ 101.525330] RDX: 0000000000000001 RSI: ffffffffa6f2700c RDI: 00000000ffffffff [ 101.525332] RBP: ffff98fd6becc14c R08: ffffffffa7463d00 R09: ffffbdedc0917c50 [ 101.525333] R10: ffffffffa74c3578 R11: 0000000000000034 R12: 00000000ffffff00 [ 101.525335] R13: ffff98fd6b0b1000 R14: 0000000000000039 R15: ffff98fd6be35c40 [ 101.525337] FS: 0000000000000000(0000) GS:ffff98fd6e240000(0000) knlGS:0000000000000000 [ 101.525339] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.525341] CR2: 00007f34135a3a70 CR3: 0000000150210003 CR4: 00000000001706e0 [ 101.525343] Call Trace: [ 101.525346] sock_wfree+0x9c/0xa0 [ 101.525353] unix_destruct_scm+0x7b/0xa0 [ 101.525358] skb_release_head_state+0x40/0x90 [ 101.525362] skb_release_all+0xe/0x30 [ 101.525364] napi_consume_skb+0x57/0x160 [ 101.525367] igc_poll+0xb7/0xc80 [igc] [ 101.525376] ? sched_clock+0x5/0x10 [ 101.525381] ? sched_clock_cpu+0xe/0x100 [ 101.525385] net_rx_action+0x14c/0x410 [ 101.525388] __do_softirq+0xe9/0x2f4 [ 101.525391] __local_bh_enable_ip+0xe3/0x110 [ 101.525395] ? irq_finalize_oneshot.part.47+0xe0/0xe0 [ 101.525398] irq_forced_thread_fn+0x6a/0x80 [ 101.525401] irq_thread+0xe8/0x180 [ 101.525403] ? wake_threads_waitq+0x30/0x30 [ 101.525406] ? irq_thread_check_affinity+0xd0/0xd0 [ 101.525408] kthread+0x183/0x1a0 [ 101.525412] ? kthread_park+0x80/0x80 [ 101.525415] ret_from_fork+0x22/0x30 | 2024-05-21 | not yet calculated | CVE-2021-47302 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bpf: Track subprog poke descriptors correctly and fix use-after-free Subprograms are calling map_poke_track(), but on program release there is no hook to call map_poke_untrack(). However, on program release, the aux memory (and poke descriptor table) is freed even though we still have a reference to it in the element list of the map aux data. When we run map_poke_run(), we then end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run(): [...] [ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e [ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337 [ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399 [ 402.824715] Call Trace: [ 402.824719] dump_stack+0x93/0xc2 [ 402.824727] print_address_description.constprop.0+0x1a/0x140 [ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824744] kasan_report.cold+0x7c/0xd8 [ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e [ 402.824757] prog_array_map_poke_run+0xc2/0x34e [ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0 [...] The elements concerned are walked as follows: for (i = 0; i < elem->aux->size_poke_tab; i++) { poke = &elem->aux->poke_tab[i]; [...] The access to size_poke_tab is a 4 byte read, verified by checking offsets in the KASAN dump: [ 402.825004] The buggy address belongs to the object at ffff8881905a7800 which belongs to the cache kmalloc-1k of size 1024 [ 402.825008] The buggy address is located 320 bytes inside of 1024-byte region [ffff8881905a7800, ffff8881905a7c00) The pahole output of bpf_prog_aux: struct bpf_prog_aux { [...] /* --- cacheline 5 boundary (320 bytes) --- */ u32 size_poke_tab; /* 320 4 */ [...] In general, subprograms do not necessarily manage their own data structures. For example, BTF func_info and linfo are just pointers to the main program structure. This allows reference counting and cleanup to be done on the latter which simplifies their management a bit. The aux->poke_tab struct, however, did not follow this logic. The initial proposed fix for this use-after-free bug further embedded poke data tracking into the subprogram with proper reference counting. However, Daniel and Alexei questioned why we were treating these objects special; I agree, its unnecessary. The fix here removes the per subprogram poke table allocation and map tracking and instead simply points the aux->poke_tab pointer at the main programs poke table. This way, map tracking is simplified to the main program and we do not need to manage them per subprogram. This also means, bpf_prog_free_deferred(), which unwinds the program reference counting and kfrees objects, needs to ensure that we don't try to double free the poke_tab when free'ing the subprog structures. This is easily solved by NULL'ing the poke_tab pointer. The second detail is to ensure that per subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do this, we add a pointer in the poke structure to point at the subprogram value so JITs can easily check while walking the poke_tab structure if the current entry belongs to the current program. The aux pointer is stable and therefore suitable for such comparison. On the jit_subprogs() error path, we omit cleaning up the poke->aux field because these are only ever referenced from the JIT side, but on error we will never make it to the JIT, so its fine to leave them dangling. Removing these pointers would complicate the error path for no reason. However, we do need to untrack all poke descriptors from the main program as otherwise they could race with the freeing of JIT memory from the subprograms. Lastly, a748c6975dea3 ("bpf: propagate poke des ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47303 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tcp: fix tcp_init_transfer() to not reset icsk_ca_initialized This commit fixes a bug (found by syzkaller) that could cause spurious double-initializations for congestion control modules, which could cause memory leaks or other problems for congestion control modules (like CDG) that allocate memory in their init functions. The buggy scenario constructed by syzkaller was something like: (1) create a TCP socket (2) initiate a TFO connect via sendto() (3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION), which calls: tcp_set_congestion_control() -> tcp_reinit_congestion_control() -> tcp_init_congestion_control() (4) receive ACK, connection is established, call tcp_init_transfer(), set icsk_ca_initialized=0 (without first calling cc->release()), call tcp_init_congestion_control() again. Note that in this sequence tcp_init_congestion_control() is called twice without a cc->release() call in between. Thus, for CC modules that allocate memory in their init() function, e.g, CDG, a memory leak may occur. The syzkaller tool managed to find a reproducer that triggered such a leak in CDG. The bug was introduced when that commit 8919a9b31eb4 ("tcp: Only init congestion control if not initialized already") introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in tcp_init_transfer(), missing the possibility for a sequence like the one above, where a process could call setsockopt(TCP_CONGESTION) in state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()), which would call tcp_init_congestion_control(). It did not intend to reset any initialization that the user had already explicitly made; it just missed the possibility of that particular sequence (which syzkaller managed to find). | 2024-05-21 | not yet calculated | CVE-2021-47304 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: dma-buf/sync_file: Don't leak fences on merge failure Each add_fence() call does a dma_fence_get() on the relevant fence. In the error path, we weren't calling dma_fence_put() so all those fences got leaked. Also, in the krealloc_array failure case, we weren't freeing the fences array. Instead, ensure that i and fences are always zero-initialized and dma_fence_put() all the fences and kfree(fences) on every error path. | 2024-05-21 | not yet calculated | CVE-2021-47305 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: fddi: fix UAF in fza_probe fp is netdev private data and it cannot be used after free_netdev() call. Using fp after free_netdev() can cause UAF bug. Fix it by moving free_netdev() after error message. TURBOchannel adapter") | 2024-05-21 | not yet calculated | CVE-2021-47306 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cifs: prevent NULL deref in cifs_compose_mount_options() The optional @ref parameter might contain an NULL node_name, so prevent dereferencing it in cifs_compose_mount_options(). Addresses-Coverity: 1476408 ("Explicit null dereferenced") | 2024-05-21 | not yet calculated | CVE-2021-47307 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix array index out of bound exception Fix array index out of bound exception in fc_rport_prli_resp(). | 2024-05-21 | not yet calculated | CVE-2021-47308 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: validate lwtstate->data before returning from skb_tunnel_info() skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info type without validation. lwtstate->data can have various types such as mpls_iptunnel_encap, etc and these are not compatible. So skb_tunnel_info() should validate before returning that pointer. Splat looks like: BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan] Read of size 2 at addr ffff888106ec2698 by task ping/811 CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195 Call Trace: dump_stack_lvl+0x56/0x7b print_address_description.constprop.8.cold.13+0x13/0x2ee ? vxlan_get_route+0x418/0x4b0 [vxlan] ? vxlan_get_route+0x418/0x4b0 [vxlan] kasan_report.cold.14+0x83/0xdf ? vxlan_get_route+0x418/0x4b0 [vxlan] vxlan_get_route+0x418/0x4b0 [vxlan] [ ... ] vxlan_xmit_one+0x148b/0x32b0 [vxlan] [ ... ] vxlan_xmit+0x25c5/0x4780 [vxlan] [ ... ] dev_hard_start_xmit+0x1ae/0x6e0 __dev_queue_xmit+0x1f39/0x31a0 [ ... ] neigh_xmit+0x2f9/0x940 mpls_xmit+0x911/0x1600 [mpls_iptunnel] lwtunnel_xmit+0x18f/0x450 ip_finish_output2+0x867/0x2040 [ ... ] | 2024-05-21 | not yet calculated | CVE-2021-47309 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: ti: fix UAF in tlan_remove_one priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. | 2024-05-21 | not yet calculated | CVE-2021-47310 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: qcom/emac: fix UAF in emac_remove adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. | 2024-05-21 | not yet calculated | CVE-2021-47311 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix dereference of null pointer flow In the case where chain->flags & NFT_CHAIN_HW_OFFLOAD is false then nft_flow_rule_create is not called and flow is NULL. The subsequent error handling execution via label err_destroy_flow_rule will lead to a null pointer dereference on flow when calling nft_flow_rule_destroy. Since the error path to err_destroy_flow_rule has to cater for null and non-null flows, only call nft_flow_rule_destroy if flow is non-null to fix this issue. Addresses-Coverity: ("Explicity null dereference") | 2024-05-21 | not yet calculated | CVE-2021-47312 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Fix potential memleak in cppc_cpufreq_cpu_init It's a classic example of memleak, we allocate something, we fail and never free the resources. Make sure we free all resources on policy ->init() failures. | 2024-05-21 | not yet calculated | CVE-2021-47313 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: memory: fsl_ifc: fix leak of private memory on probe failure On probe error the driver should free the memory allocated for private structure. Fix this by using resource-managed allocation. | 2024-05-21 | not yet calculated | CVE-2021-47314 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: memory: fsl_ifc: fix leak of IO mapping on probe failure On probe error the driver should unmap the IO memory. Smatch reports: drivers/memory/fsl_ifc.c:298 fsl_ifc_ctrl_probe() warn: 'fsl_ifc_ctrl_dev->gregs' not released on lines: 298. | 2024-05-21 | not yet calculated | CVE-2021-47315 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix NULL dereference in nfs3svc_encode_getaclres In error cases the dentry may be NULL. Before 20798dfe249a, the encoder also checked dentry and d_really_is_positive(dentry), but that looks like overkill to me--zero status should be enough to guarantee a positive dentry. This isn't the first time we've seen an error-case NULL dereference hidden in the initialization of a local variable in an xdr encoder. But I went back through the other recent rewrites and didn't spot any similar bugs. | 2024-05-21 | not yet calculated | CVE-2021-47316 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf: Fix detecting BPF atomic instructions Commit 91c960b0056672 ("bpf: Rename BPF_XADD and prepare to encode other atomics in .imm") converted BPF_XADD to BPF_ATOMIC and added a way to distinguish instructions based on the immediate field. Existing JIT implementations were updated to check for the immediate field and to reject programs utilizing anything more than BPF_ADD (such as BPF_FETCH) in the immediate field. However, the check added to powerpc64 JIT did not look at the correct BPF instruction. Due to this, such programs would be accepted and incorrectly JIT'ed resulting in soft lockups, as seen with the atomic bounds test. Fix this by looking at the correct immediate value. | 2024-05-21 | not yet calculated | CVE-2021-47317 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: arch_topology: Avoid use-after-free for scale_freq_data Currently topology_scale_freq_tick() (which gets called from scheduler_tick()) may end up using a pointer to "struct scale_freq_data", which was previously cleared by topology_clear_scale_freq_source(), as there is no protection in place here. The users of topology_clear_scale_freq_source() though needs a guarantee that the previously cleared scale_freq_data isn't used anymore, so they can free the related resources. Since topology_scale_freq_tick() is called from scheduler tick, we don't want to add locking in there. Use the RCU update mechanism instead (which is already used by the scheduler's utilization update path) to guarantee race free updates here. synchronize_rcu() makes sure that all RCU critical sections that started before it is called, will finish before it returns. And so the callers of topology_clear_scale_freq_source() don't need to worry about their callback getting called anymore. | 2024-05-21 | not yet calculated | CVE-2021-47318 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Fix memory leak among suspend/resume procedure The vblk->vqs should be freed before we call init_vqs() in virtblk_restore(). | 2024-05-21 | not yet calculated | CVE-2021-47319 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nfs: fix acl memory leak of posix_acl_create() When looking into another nfs xfstests report, I found acl and default_acl in nfs3_proc_create() and nfs3_proc_mknod() error paths are possibly leaked. Fix them in advance. | 2024-05-21 | not yet calculated | CVE-2021-47320 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free by calling del_timer_sync() This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. | 2024-05-21 | not yet calculated | CVE-2021-47321 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix an Oops in pnfs_mark_request_commit() when doing O_DIRECT Fix an Oopsable condition in pnfs_mark_request_commit() when we're putting a set of writes on the commit list to reschedule them after a failed pNFS attempt. | 2024-05-21 | not yet calculated | CVE-2021-47322 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. | 2024-05-21 | not yet calculated | CVE-2021-47323 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix possible use-after-free in wdt_startup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. | 2024-05-21 | not yet calculated | CVE-2021-47324 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation The reference counting issue happens in several exception handling paths of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the function forgets to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by jumping to "out" label when those error scenarios occur. | 2024-05-21 | not yet calculated | CVE-2021-47325 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the refcount of the "smmu" even though the return value is less than 0. The reference counting issue happens in some error handling paths of arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get() fails, the caller functions forget to decrease the refcount of "smmu" increased by arm_smmu_rpm_get(), causing a refcount leak. Fix this issue by calling pm_runtime_resume_and_get() instead of pm_runtime_get_sync() in arm_smmu_rpm_get(), which can keep the refcount balanced in case of failure. | 2024-05-21 | not yet calculated | CVE-2021-47327 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi: Fix conn use after free during resets If we haven't done a unbind target call we can race where iscsi_conn_teardown wakes up the EH thread and then frees the conn while those threads are still accessing the conn ehwait. We can only do one TMF per session so this just moves the TMF fields from the conn to the session. We can then rely on the iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call to remove the target and it's devices, and know after that point there is no device or scsi-ml callout trying to access the session. | 2024-05-21 | not yet calculated | CVE-2021-47328 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix resource leak in case of probe failure The driver doesn't clean up all the allocated resources properly when scsi_add_host(), megasas_start_aen() function fails during the PCI device probe. Clean up all those resources. | 2024-05-21 | not yet calculated | CVE-2021-47329 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tty: serial: 8250: serial_cs: Fix a memory leak in error handling path In the probe function, if the final 'serial_config()' fails, 'info' is leaking. Add a resource handling path to free this memory. | 2024-05-21 | not yet calculated | CVE-2021-47330 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: common: usb-conn-gpio: fix NULL pointer dereference of charger When power on system with OTG cable, IDDIG's interrupt arises before the charger registration, it will cause a NULL pointer dereference, fix the issue by registering the power supply before requesting IDDIG/VBUS irq. | 2024-05-21 | not yet calculated | CVE-2021-47331 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ALSA: usx2y: Don't call free_pages_exact() with NULL address Unlike some other functions, we can't pass NULL pointer to free_pages_exact(). Add a proper NULL check for avoiding possible Oops. | 2024-05-21 | not yet calculated | CVE-2021-47332 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: misc: alcor_pci: fix null-ptr-deref when there is no PCI bridge There is an issue with the ASPM(optional) capability checking function. A device might be attached to root complex directly, in this case, bus->self(bridge) will be NULL, thus priv->parent_pdev is NULL. Since alcor_pci_init_check_aspm(priv->parent_pdev) checks the PCI link's ASPM capability and populate parent_cap_off, which will be used later by alcor_pci_aspm_ctrl() to dynamically turn on/off device, what we can do here is to avoid checking the capability if we are on the root complex. This will make pdev_cap_off 0 and alcor_pci_aspm_ctrl() will simply return when bring called, effectively disable ASPM for the device. [ 1.246492] BUG: kernel NULL pointer dereference, address: 00000000000000c0 [ 1.248731] RIP: 0010:pci_read_config_byte+0x5/0x40 [ 1.253998] Call Trace: [ 1.254131] ? alcor_pci_find_cap_offset.isra.0+0x3a/0x100 [alcor_pci] [ 1.254476] alcor_pci_probe+0x169/0x2d5 [alcor_pci] | 2024-05-21 | not yet calculated | CVE-2021-47333 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: misc/libmasm/module: Fix two use after free in ibmasm_init_one In ibmasm_init_one, it calls ibmasm_init_remote_input_dev(). Inside ibmasm_init_remote_input_dev, mouse_dev and keybd_dev are allocated by input_allocate_device(), and assigned to sp->remote.mouse_dev and sp->remote.keybd_dev respectively. In the err_free_devices error branch of ibmasm_init_one, mouse_dev and keybd_dev are freed by input_free_device(), and return error. Then the execution runs into error_send_message error branch of ibmasm_init_one, where ibmasm_free_remote_input_dev(sp) is called to unregister the freed sp->remote.mouse_dev and sp->remote.keybd_dev. My patch add a "error_init_remote" label to handle the error of ibmasm_init_remote_input_dev(), to avoid the uaf bugs. | 2024-05-21 | not yet calculated | CVE-2021-47334 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem instances As syzbot reported, there is an use-after-free issue during f2fs recovery: Use-after-free write at 0xffff88823bc16040 (in kfence-#10): kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945 mount_bdev+0x26c/0x3a0 fs/super.c:1367 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2905 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3235 do_mount fs/namespace.c:3248 [inline] __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is multi f2fs filesystem instances can race on accessing global fsync_entry_slab pointer, result in use-after-free issue of slab cache, fixes to init/destroy this slab cache only once during module init/destroy procedure to avoid this issue. | 2024-05-21 | not yet calculated | CVE-2021-47335 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: smackfs: restrict bytes count in smk_set_cipso() Oops, I failed to update subject line. From 07571157c91b98ce1a4aa70967531e64b78e8346 Mon Sep 17 00:00:00 2001 Date: Mon, 12 Apr 2021 22:25:06 +0900 Subject: [PATCH] smackfs: restrict bytes count in smk_set_cipso() Commit 7ef4c19d245f3dc2 ("smackfs: restrict bytes count in smackfs write functions") missed that count > SMK_CIPSOMAX check applies to only format == SMK_FIXED24_FMT case. | 2024-05-21 | not yet calculated | CVE-2021-47336 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix bad pointer dereference when ehandler kthread is invalid Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which will always be the case whether the kthread was successfully spawned or not. In the case that it failed to spawn this has the nasty side effect of trying to dereference an invalid pointer when kthread_stop() is called. The following splat provides an example of this behavior in the wild: scsi host11: error handler thread failed to spawn, error = -4 Kernel attempted to read user page (10c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x0000010c Faulting instruction address: 0xc00000000818e9a8 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region hash dm_log dm_mod fuse overlay squashfs loop CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1 NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8 REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28228228 XER: 20040001 CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0 GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000 GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0 GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288 GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898 GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000 GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc NIP [c00000000818e9a8] kthread_stop+0x38/0x230 LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160 Call Trace: [c000000033bb2c48] 0xc000000033bb2c48 (unreliable) [c0000000089846e8] scsi_host_dev_release+0x98/0x160 [c00000000891e960] device_release+0x60/0x100 [c0000000087e55c4] kobject_release+0x84/0x210 [c00000000891ec78] put_device+0x28/0x40 [c000000008984ea4] scsi_host_alloc+0x314/0x430 [c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi] [c000000008110104] vio_bus_probe+0xa4/0x4b0 [c00000000892a860] really_probe+0x140/0x680 [c00000000892aefc] driver_probe_device+0x15c/0x200 [c00000000892b63c] device_driver_attach+0xcc/0xe0 [c00000000892b740] __driver_attach+0xf0/0x200 [c000000008926f28] bus_for_each_dev+0xa8/0x130 [c000000008929ce4] driver_attach+0x34/0x50 [c000000008928fc0] bus_add_driver+0x1b0/0x300 [c00000000892c798] driver_register+0x98/0x1a0 [c00000000810eb60] __vio_register_driver+0x80/0xe0 [c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi] [c0000000080121d0] do_one_initcall+0x60/0x2d0 [c000000008261abc] do_init_module+0x7c/0x320 [c000000008265700] load_module+0x2350/0x25b0 [c000000008265cb4] __do_sys_finit_module+0xd4/0x160 [c000000008031110] system_call_exception+0x150/0x2d0 [c00000000800d35c] system_call_common+0xec/0x278 Fix this be nulling shost->ehandler when the kthread fails to spawn. | 2024-05-21 | not yet calculated | CVE-2021-47337 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: fbmem: Do not delete the mode that is still in use The execution of fb_delete_videomode() is not based on the result of the previous fbcon_mode_deleted(). As a result, the mode is directly deleted, regardless of whether it is still in use, which may cause UAF. ================================================================== BUG: KASAN: use-after-free in fb_mode_is_equal+0x36e/0x5e0 \ drivers/video/fbdev/core/modedb.c:924 Read of size 4 at addr ffff88807e0ddb1c by task syz-executor.0/18962 CPU: 2 PID: 18962 Comm: syz-executor.0 Not tainted 5.10.45-rc1+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ... Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x137/0x1be lib/dump_stack.c:118 print_address_description+0x6c/0x640 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x13d/0x1e0 mm/kasan/report.c:562 fb_mode_is_equal+0x36e/0x5e0 drivers/video/fbdev/core/modedb.c:924 fbcon_mode_deleted+0x16a/0x220 drivers/video/fbdev/core/fbcon.c:2746 fb_set_var+0x1e1/0xdb0 drivers/video/fbdev/core/fbmem.c:975 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 18960: kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x3d/0x70 mm/kasan/common.c:56 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x108/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1541 [inline] slab_free_freelist_hook+0xd6/0x1a0 mm/slub.c:1574 slab_free mm/slub.c:3139 [inline] kfree+0xca/0x3d0 mm/slub.c:4121 fb_delete_videomode+0x56a/0x820 drivers/video/fbdev/core/modedb.c:1104 fb_set_var+0x1f3/0xdb0 drivers/video/fbdev/core/fbmem.c:978 do_fb_ioctl+0x4d9/0x6e0 drivers/video/fbdev/core/fbmem.c:1108 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl+0xfb/0x170 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 | 2024-05-21 | not yet calculated | CVE-2021-47338 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: explicitly clear ioctl input data As seen from a recent syzbot bug report, mistakes in the compat ioctl implementation can lead to uninitialized kernel stack data getting used as input for driver ioctl handlers. The reported bug is now fixed, but it's possible that other related bugs are still present or get added in the future. As the drivers need to check user input already, the possible impact is fairly low, but it might still cause an information leak. To be on the safe side, always clear the entire ioctl buffer before calling the conversion handler functions that are meant to initialize them. | 2024-05-21 | not yet calculated | CVE-2021-47339 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: jfs: fix GPF in diFree Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670 | 2024-05-21 | not yet calculated | CVE-2021-47340 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KVM: mmio: Fix use-after-free Read in kvm_vm_ioctl_unregister_coalesced_mmio BUG: KASAN: use-after-free in kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183 Read of size 8 at addr ffff0000c03a2500 by task syz-executor083/4269 CPU: 5 PID: 4269 Comm: syz-executor083 Not tainted 5.10.0 #7 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2d0 arch/arm64/kernel/stacktrace.c:132 show_stack+0x28/0x34 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x164 lib/dump_stack.c:118 print_address_description+0x78/0x5c8 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x148/0x1e4 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:183 [inline] __asan_load8+0xb4/0xbc mm/kasan/generic.c:252 kvm_vm_ioctl_unregister_coalesced_mmio+0x7c/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:183 kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 Allocated by task 4269: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0xdc/0x120 mm/kasan/common.c:461 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:475 kmem_cache_alloc_trace include/linux/slab.h:450 [inline] kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] kvm_vm_ioctl_register_coalesced_mmio+0x78/0x1cc arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:146 kvm_vm_ioctl+0x7e8/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3746 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:220 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670 Freed by task 4269: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x38/0x6c mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:355 __kasan_slab_free+0x124/0x150 mm/kasan/common.c:422 kasan_slab_free+0x10/0x1c mm/kasan/common.c:431 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook mm/slub.c:1577 [inline] slab_free mm/slub.c:3142 [inline] kfree+0x104/0x38c mm/slub.c:4124 coalesced_mmio_destructor+0x94/0xa4 arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:102 kvm_iodevice_destructor include/kvm/iodev.h:61 [inline] kvm_io_bus_unregister_dev+0x248/0x280 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:4374 kvm_vm_ioctl_unregister_coalesced_mmio+0x158/0x1ec arch/arm64/kvm/../../../virt/kvm/coalesced_mmio.c:186 kvm_vm_ioctl+0xe30/0x14c4 arch/arm64/kvm/../../../virt/kvm/kvm_main.c:3755 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __arm64_sys_ioctl+0xf88/0x131c fs/ioctl.c:739 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/sys ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47341 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ext4: fix possible UAF when remounting r/o a mmp-protected file system After commit 618f003199c6 ("ext4: fix memory leak in ext4_fill_super"), after the file system is remounted read-only, there is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to point at freed memory, which the call to ext4_stop_mmpd() can trip over. Fix this by only allowing kmmpd() to exit when it is stopped via ext4_stop_mmpd(). Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com> | 2024-05-21 | not yet calculated | CVE-2021-47342 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: dm btree remove: assign new_root only when removal succeeds remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove(). For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below: general protection fault, probably for non-canonical address 0x3fdcb14c8d7520 CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6 Hardware name: QEMU Standard PC RIP: 0010:metadata_ll_load_ie+0x14/0x30 Call Trace: sm_metadata_count_is_more_than_one+0xb9/0xe0 dm_tm_shadow_block+0x52/0x1c0 shadow_step+0x59/0xf0 remove_raw+0xb2/0x170 dm_btree_remove+0xf4/0x1c0 dm_pool_delete_thin_device+0xc3/0x140 pool_message+0x218/0x2b0 target_message+0x251/0x290 ctl_ioctl+0x1c4/0x4d0 dm_ctl_ioctl+0xe/0x20 __x64_sys_ioctl+0x7b/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixing it by only assign new_root when removal succeeds | 2024-05-21 | not yet calculated | CVE-2021-47343 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: zr364xx: fix memory leak in zr364xx_start_readpipe syzbot reported memory leak in zr364xx driver. The problem was in non-freed urb in case of usb_submit_urb() fail. backtrace: [<ffffffff82baedf6>] kmalloc include/linux/slab.h:561 [inline] [<ffffffff82baedf6>] usb_alloc_urb+0x66/0xe0 drivers/usb/core/urb.c:74 [<ffffffff82f7cce8>] zr364xx_start_readpipe+0x78/0x130 drivers/media/usb/zr364xx/zr364xx.c:1022 [<ffffffff84251dfc>] zr364xx_board_init drivers/media/usb/zr364xx/zr364xx.c:1383 [inline] [<ffffffff84251dfc>] zr364xx_probe+0x6a3/0x851 drivers/media/usb/zr364xx/zr364xx.c:1516 [<ffffffff82bb6507>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff826018a9>] really_probe+0x159/0x500 drivers/base/dd.c:576 | 2024-05-21 | not yet calculated | CVE-2021-47344 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix rdma_resolve_route() memory leak Fix a memory leak when "mda_resolve_route() is called more than once on the same "rdma_cm_id". This is possible if cma_query_handler() triggers the RDMA_CM_EVENT_ROUTE_ERROR flow which puts the state machine back and allows rdma_resolve_route() to be called again. | 2024-05-21 | not yet calculated | CVE-2021-47345 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: coresight: tmc-etf: Fix global-out-of-bounds in tmc_update_etf_buffer() commit 6f755e85c332 ("coresight: Add helper for inserting synchronization packets") removed trailing '\0' from barrier_pkt array and updated the call sites like etb_update_buffer() to have proper checks for barrier_pkt size before read but missed updating tmc_update_etf_buffer() which still reads barrier_pkt past the array size resulting in KASAN out-of-bounds bug. Fix this by adding a check for barrier_pkt size before accessing like it is done in etb_update_buffer(). BUG: KASAN: global-out-of-bounds in tmc_update_etf_buffer+0x4b8/0x698 Read of size 4 at addr ffffffd05b7d1030 by task perf/2629 Call trace: dump_backtrace+0x0/0x27c show_stack+0x20/0x2c dump_stack+0x11c/0x188 print_address_description+0x3c/0x4a4 __kasan_report+0x140/0x164 kasan_report+0x10/0x18 __asan_report_load4_noabort+0x1c/0x24 tmc_update_etf_buffer+0x4b8/0x698 etm_event_stop+0x248/0x2d8 etm_event_del+0x20/0x2c event_sched_out+0x214/0x6f0 group_sched_out+0xd0/0x270 ctx_sched_out+0x2ec/0x518 __perf_event_task_sched_out+0x4fc/0xe6c __schedule+0x1094/0x16a0 preempt_schedule_irq+0x88/0x170 arm64_preempt_schedule_irq+0xf0/0x18c el1_irq+0xe8/0x180 perf_event_exec+0x4d8/0x56c setup_new_exec+0x204/0x400 load_elf_binary+0x72c/0x18c0 search_binary_handler+0x13c/0x420 load_script+0x500/0x6c4 search_binary_handler+0x13c/0x420 exec_binprm+0x118/0x654 __do_execve_file+0x77c/0xba4 __arm64_compat_sys_execve+0x98/0xac el0_svc_common+0x1f8/0x5e0 el0_svc_compat_handler+0x84/0xb0 el0_svc_compat+0x10/0x50 The buggy address belongs to the variable: barrier_pkt+0x10/0x40 Memory state around the buggy address: ffffffd05b7d0f00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 ffffffd05b7d0f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffd05b7d1000: 00 00 00 00 00 00 fa fa fa fa fa fa 00 00 00 03 ^ ffffffd05b7d1080: fa fa fa fa 00 02 fa fa fa fa fa fa 03 fa fa fa ffffffd05b7d1100: fa fa fa fa 00 00 00 00 05 fa fa fa fa fa fa fa ================================================================== | 2024-05-21 | not yet calculated | CVE-2021-47346 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: wl1251: Fix possible buffer overflow in wl1251_cmd_scan Function wl1251_cmd_scan calls memcpy without checking the length. Harden by checking the length is within the maximum allowed size. | 2024-05-21 | not yet calculated | CVE-2021-47347 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid HDCP over-read and corruption Instead of reading the desired 5 bytes of the actual target field, the code was reading 8. This could result in a corrupted value if the trailing 3 bytes were non-zero, so instead use an appropriately sized and zero-initialized bounce buffer, and read only 5 bytes before casting to u64. | 2024-05-21 | not yet calculated | CVE-2021-47348 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mwifiex: bring down link before deleting interface We can deadlock when rmmod'ing the driver or going through firmware reset, because the cfg80211_unregister_wdev() has to bring down the link for us, ... which then grab the same wiphy lock. nl80211_del_interface() already handles a very similar case, with a nice description: /* * We hold RTNL, so this is safe, without RTNL opencount cannot * reach 0, and thus the rdev cannot be deleted. * * We need to do it for the dev_close(), since that will call * the netdev notifiers, and we need to acquire the mutex there * but don't know if we get there from here or from some other * place (e.g. "ip link set ... down"). */ mutex_unlock(&rdev->wiphy.mtx); ... Do similarly for mwifiex teardown, by ensuring we bring the link down first. Sample deadlock trace: [ 247.103516] INFO: task rmmod:2119 blocked for more than 123 seconds. [ 247.110630] Not tainted 5.12.4 #5 [ 247.115796] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.124557] task:rmmod state:D stack: 0 pid: 2119 ppid: 2114 flags:0x00400208 [ 247.133905] Call trace: [ 247.136644] __switch_to+0x130/0x170 [ 247.140643] __schedule+0x714/0xa0c [ 247.144548] schedule_preempt_disabled+0x88/0xf4 [ 247.149714] __mutex_lock_common+0x43c/0x750 [ 247.154496] mutex_lock_nested+0x5c/0x68 [ 247.158884] cfg80211_netdev_notifier_call+0x280/0x4e0 [cfg80211] [ 247.165769] raw_notifier_call_chain+0x4c/0x78 [ 247.170742] call_netdevice_notifiers_info+0x68/0xa4 [ 247.176305] __dev_close_many+0x7c/0x138 [ 247.180693] dev_close_many+0x7c/0x10c [ 247.184893] unregister_netdevice_many+0xfc/0x654 [ 247.190158] unregister_netdevice_queue+0xb4/0xe0 [ 247.195424] _cfg80211_unregister_wdev+0xa4/0x204 [cfg80211] [ 247.201816] cfg80211_unregister_wdev+0x20/0x2c [cfg80211] [ 247.208016] mwifiex_del_virtual_intf+0xc8/0x188 [mwifiex] [ 247.214174] mwifiex_uninit_sw+0x158/0x1b0 [mwifiex] [ 247.219747] mwifiex_remove_card+0x38/0xa0 [mwifiex] [ 247.225316] mwifiex_pcie_remove+0xd0/0xe0 [mwifiex_pcie] [ 247.231451] pci_device_remove+0x50/0xe0 [ 247.235849] device_release_driver_internal+0x110/0x1b0 [ 247.241701] driver_detach+0x5c/0x9c [ 247.245704] bus_remove_driver+0x84/0xb8 [ 247.250095] driver_unregister+0x3c/0x60 [ 247.254486] pci_unregister_driver+0x2c/0x90 [ 247.259267] cleanup_module+0x18/0xcdc [mwifiex_pcie] | 2024-05-21 | not yet calculated | CVE-2021-47349 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: powerpc/mm: Fix lockup on kernel exec fault The powerpc kernel is not prepared to handle exec faults from kernel. Especially, the function is_exec_fault() will return 'false' when an exec fault is taken by kernel, because the check is based on reading current->thread.regs->trap which contains the trap from user. For instance, when provoking a LKDTM EXEC_USERSPACE test, current->thread.regs->trap is set to SYSCALL trap (0xc00), and the fault taken by the kernel is not seen as an exec fault by set_access_flags_filter(). Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix with autonuma") made it clear and handled it properly. But later on commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults") removed that handling, introducing test based on error_code. And here is the problem, because on the 603 all upper bits of SRR1 get cleared when the TLB instruction miss handler bails out to ISI. Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy search_exception_tables() verification"), an exec fault from kernel at a userspace address was indirectly caught by the lack of entry for that address in the exception tables. But after that commit the kernel mainly relies on KUAP or on core mm handling to catch wrong user accesses. Here the access is not wrong, so mm handles it. It is a minor fault because PAGE_EXEC is not set, set_access_flags_filter() should set PAGE_EXEC and voila. But as is_exec_fault() returns false as explained in the beginning, set_access_flags_filter() bails out without setting PAGE_EXEC flag, which leads to a forever minor exec fault. As the kernel is not prepared to handle such exec faults, the thing to do is to fire in bad_kernel_fault() for any exec fault taken by the kernel, as it was prior to commit d3ca587404b3. | 2024-05-21 | not yet calculated | CVE-2021-47350 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix races between xattr_{set|get} and listxattr operations UBIFS may occur some problems with concurrent xattr_{set|get} and listxattr operations, such as assertion failure, memory corruption, stale xattr value[1]. Fix it by importing a new rw-lock in @ubifs_inode to serilize write operations on xattr, concurrent read operations are still effective, just like ext4. [1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com | 2024-05-21 | not yet calculated | CVE-2021-47351 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: virtio-net: Add validation for used length This adds validation for used length (might come from an untrusted device) to avoid data corruption or loss. | 2024-05-21 | not yet calculated | CVE-2021-47352 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: udf: Fix NULL pointer dereference in udf_symlink function In function udf_symlink, epos.bh is assigned with the value returned by udf_tgetblk. The function udf_tgetblk is defined in udf/misc.c and returns the value of sb_getblk function that could be NULL. Then, epos.bh is used without any check, causing a possible NULL pointer dereference when sb_getblk fails. This fix adds a check to validate the value of epos.bh. | 2024-05-21 | not yet calculated | CVE-2021-47353 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/sched: Avoid data corruptions Wait for all dependencies of a job to complete before killing it to avoid data corruptions. | 2024-05-21 | not yet calculated | CVE-2021-47354 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: atm: nicstar: Fix possible use-after-free in nicstar_cleanup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. | 2024-05-21 | not yet calculated | CVE-2021-47355 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mISDN: fix possible use-after-free in HFC_cleanup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. | 2024-05-21 | not yet calculated | CVE-2021-47356 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: atm: iphase: fix possible use-after-free in ia_module_exit() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. | 2024-05-21 | not yet calculated | CVE-2021-47357 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: staging: greybus: uart: fix tty use after free User space can hold a tty open indefinitely and tty drivers must not release the underlying structures until the last user is gone. Switch to using the tty-port reference counter to manage the life time of the greybus tty state to avoid use after free after a disconnect. | 2024-05-21 | not yet calculated | CVE-2021-47358 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix soft lockup during fsstress Below traces are observed during fsstress and system got hung. [ 130.698396] watchdog: BUG: soft lockup - CPU#6 stuck for 26s! | 2024-05-21 | not yet calculated | CVE-2021-47359 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: binder: make sure fd closes complete During BC_FREE_BUFFER processing, the BINDER_TYPE_FDA object cleanup may close 1 or more fds. The close operations are completed using the task work mechanism -- which means the thread needs to return to userspace or the file object may never be dereferenced -- which can lead to hung processes. Force the binder thread back to userspace if an fd is closed during BC_FREE_BUFFER handling. | 2024-05-21 | not yet calculated | CVE-2021-47360 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mcb: fix error handling in mcb_alloc_bus() There are two bugs: 1) If ida_simple_get() fails then this code calls put_device(carrier) but we haven't yet called get_device(carrier) and probably that leads to a use after free. 2) After device_initialize() then we need to use put_device() to release the bus. This will free the internal resources tied to the device and call mcb_free_bus() which will free the rest. | 2024-05-21 | not yet calculated | CVE-2021-47361 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Update intermediate power state for SI Update the current state as boot state during dpm initialization. During the subsequent initialization, set_power_state gets called to transition to the final power state. set_power_state refers to values from the current state and without current state populated, it could result in NULL pointer dereference. For ex: on platforms where PCI speed change is supported through ACPI ATCS method, the link speed of current state needs to be queried before deciding on changing to final power state's link speed. The logic to query ATCS-support was broken on certain platforms. The issue became visible when broken ATCS-support logic got fixed with commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)"). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698 | 2024-05-21 | not yet calculated | CVE-2021-47362 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nexthop: Fix division by zero while replacing a resilient group The resilient nexthop group torture tests in fib_nexthop.sh exposed a possible division by zero while replacing a resilient group [1]. The division by zero occurs when the data path sees a resilient nexthop group with zero buckets. The tests replace a resilient nexthop group in a loop while traffic is forwarded through it. The tests do not specify the number of buckets while performing the replacement, resulting in the kernel allocating a stub resilient table (i.e, 'struct nh_res_table') with zero buckets. This table should never be visible to the data path, but the old nexthop group (i.e., 'oldg') might still be used by the data path when the stub table is assigned to it. Fix this by only assigning the stub table to the old nexthop group after making sure the group is no longer used by the data path. Tested with fib_nexthops.sh: Tests passed: 222 Tests failed: 0 [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:nexthop_select_path+0x2d2/0x1a80 [...] Call Trace: fib_select_multipath+0x79b/0x1530 fib_select_path+0x8fb/0x1c10 ip_route_output_key_hash_rcu+0x1198/0x2da0 ip_route_output_key_hash+0x190/0x340 ip_route_output_flow+0x21/0x120 raw_sendmsg+0x91d/0x2e10 inet_sendmsg+0x9e/0xe0 __sys_sendto+0x23d/0x360 __x64_sys_sendto+0xe1/0x1b0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae | 2024-05-21 | not yet calculated | CVE-2021-47363 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: comedi: Fix memory leak in compat_insnlist() `compat_insnlist()` handles the 32-bit version of the `COMEDI_INSNLIST` ioctl (whenwhen `CONFIG_COMPAT` is enabled). It allocates memory to temporarily hold an array of `struct comedi_insn` converted from the 32-bit version in user space. This memory is only being freed if there is a fault while filling the array, otherwise it is leaked. Add a call to `kfree()` to fix the leak. | 2024-05-21 | not yet calculated | CVE-2021-47364 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: afs: Fix page leak There's a loop in afs_extend_writeback() that adds extra pages to a write we want to make to improve the efficiency of the writeback by making it larger. This loop stops, however, if we hit a page we can't write back from immediately, but it doesn't get rid of the page ref we speculatively acquired. This was caused by the removal of the cleanup loop when the code switched from using find_get_pages_contig() to xarray scanning as the latter only gets a single page at a time, not a batch. Fix this by putting the page on a ref on an early break from the loop. Unfortunately, we can't just add that page to the pagevec we're employing as we'll go through that and add those pages to the RPC call. This was found by the generic/074 test. It leaks ~4GiB of RAM each time it is run - which can be observed with "top". | 2024-05-21 | not yet calculated | CVE-2021-47365 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and Linux's afs client switches between them when talking to a non-YFS server if the read size, the file position or the sum of the two have the upper 32 bits set of the 64-bit value. This is a problem, however, since the file position and length fields of FS.FetchData are *signed* 32-bit values. Fix this by capturing the capability bits obtained from the fileserver when it's sent an FS.GetCapabilities RPC, rather than just discarding them, and then picking out the VICED_CAPABILITY_64BITFILES flag. This can then be used to decide whether to use FS.FetchData or FS.FetchData64 - and also FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to switch on the parameter values. This capabilities flag could also be used to limit the maximum size of the file, but all servers must be checked for that. Note that the issue does not exist with FS.StoreData - that uses *unsigned* 32-bit values. It's also not a problem with Auristor servers as its YFS.FetchData64 op uses unsigned 64-bit values. This can be tested by cloning a git repo through an OpenAFS client to an OpenAFS server and then doing "git status" on it from a Linux afs client[1]. Provided the clone has a pack file that's in the 2G-4G range, the git status will show errors like: error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index This can be observed in the server's FileLog with something like the following appearing: Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001 Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154 Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866 ... Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5 Note the file position of 18446744071815340032. This is the requested file position sign-extended. | 2024-05-21 | not yet calculated | CVE-2021-47366 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: virtio-net: fix pages leaking when building skb in big mode We try to use build_skb() if we had sufficient tailroom. But we forget to release the unused pages chained via private in big mode which will leak pages. Fixing this by release the pages after building the skb in big mode. | 2024-05-21 | not yet calculated | CVE-2021-47367 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: enetc: Fix illegal access when reading affinity_hint irq_set_affinity_hit() stores a reference to the cpumask_t parameter in the irq descriptor, and that reference can be accessed later from irq_affinity_hint_proc_show(). Since the cpu_mask parameter passed to irq_set_affinity_hit() has only temporary storage (it's on the stack memory), later accesses to it are illegal. Thus reads from the corresponding procfs affinity_hint file can result in paging request oops. The issue is fixed by the get_cpu_mask() helper, which provides a permanent storage for the cpumask_t parameter. | 2024-05-21 | not yet calculated | CVE-2021-47368 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix NULL deref in qeth_clear_working_pool_list() When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Root-caused-by: Heiko Carstens <hca@linux.ibm.com> | 2024-05-21 | not yet calculated | CVE-2021-47369 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure tx skbs always have the MPTCP ext Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension. | 2024-05-21 | not yet calculated | CVE-2021-47370 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nexthop: Fix memory leaks in nexthop notification chain listeners syzkaller discovered memory leaks [1] that can be reduced to the following commands: # ip nexthop add id 1 blackhole # devlink dev reload pci/0000:06:00.0 As part of the reload flow, mlxsw will unregister its netdevs and then unregister from the nexthop notification chain. Before unregistering from the notification chain, mlxsw will receive delete notifications for nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw will not receive notifications for nexthops using netdevs that are not dismantled as part of the reload flow. For example, the blackhole nexthop above that internally uses the loopback netdev as its nexthop device. One way to fix this problem is to have listeners flush their nexthop tables after unregistering from the notification chain. This is error-prone as evident by this patch and also not symmetric with the registration path where a listener receives a dump of all the existing nexthops. Therefore, fix this problem by replaying delete notifications for the listener being unregistered. This is symmetric to the registration path and also consistent with the netdev notification chain. The above means that unregister_nexthop_notifier(), like register_nexthop_notifier(), will have to take RTNL in order to iterate over the existing nexthops and that any callers of the function cannot hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN driver. To avoid a deadlock, change the latter to unregister its nexthop listener without holding RTNL, making it symmetric to the registration path. [1] unreferenced object 0xffff88806173d600 (size 512): comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s) hex dump (first 32 bytes): 41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa.... 08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............ backtrace: [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522 [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline] [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline] [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231 [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239 [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83 [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline] [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306 [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244 [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline] [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline] [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913 [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572 [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504 [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590 [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340 [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929 [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47371 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: macb: fix use after free on rmmod plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80 | 2024-05-21 | not yet calculated | CVE-2021-47372 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Fix potential VPE leak on error In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error, there is an off-by-one in the number of VPEs to be freed. Fix it by simply passing the number of VPEs allocated, which is the index of the loop iterating over the VPEs. [maz: fixed commit message] | 2024-05-21 | not yet calculated | CVE-2021-47373 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: dma-debug: prevent an error message from causing runtime problems For some drivers, that use the DMA API. This error message can be reached several millions of times per second, causing spam to the kernel's printk buffer and bringing the CPU usage up to 100% (so, it should be rate limited). However, since there is at least one driver that is in the mainline and suffers from the error condition, it is more useful to err_printk() here instead of just rate limiting the error message (in hopes that it will make it easier for other drivers that suffer from this issue to be spotted). | 2024-05-21 | not yet calculated | CVE-2021-47374 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: blktrace: Fix uaf in blk_trace access after removing by sysfs There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. | 2024-05-21 | not yet calculated | CVE-2021-47375 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bpf: Add oversize check before call kvcalloc() Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the oversize check. When the allocation is larger than what kmalloc() supports, the following warning triggered: WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597 Modules linked in: CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597 Call Trace: kvmalloc include/linux/mm.h:806 [inline] kvmalloc_array include/linux/mm.h:824 [inline] kvcalloc include/linux/mm.h:829 [inline] check_btf_line kernel/bpf/verifier.c:9925 [inline] check_btf_info kernel/bpf/verifier.c:10049 [inline] bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759 bpf_prog_load kernel/bpf/syscall.c:2301 [inline] __sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae | 2024-05-21 | not yet calculated | CVE-2021-47376 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: xen/balloon: use a kernel thread instead a workqueue Today the Xen ballooning is done via delayed work in a workqueue. This might result in workqueue hangups being reported in case of large amounts of memory are being ballooned in one go (here 16GB): BUG: workqueue lockup - pool cpus=6 node=0 flags=0x0 nice=0 stuck for 64s! Showing busy workqueues and worker pools: workqueue events: flags=0x0 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=2/256 refcnt=3 in-flight: 229:balloon_process pending: cache_reap workqueue events_freezable_power_: flags=0x84 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: disk_events_workfn workqueue mm_percpu_wq: flags=0x8 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: vmstat_update pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=64s workers=3 idle: 2222 43 This can easily be avoided by using a dedicated kernel thread for doing the ballooning work. | 2024-05-21 | not yet calculated | CVE-2021-47377 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: destroy cm id before destroy qp to avoid use after free We should always destroy cm_id before destroy qp to avoid to get cma event after qp was destroyed, which may lead to use after free. In RDMA connection establishment error flow, don't destroy qp in cm event handler.Just report cm_error to upper level, qp will be destroy in nvme_rdma_alloc_queue() after destroy cm id. | 2024-05-21 | not yet calculated | CVE-2021-47378 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF by grabbing blkcg lock before destroying blkg pd KASAN reports a use-after-free report when doing fuzz test: [693354.104835] ================================================================== [693354.105094] BUG: KASAN: use-after-free in bfq_io_set_weight_legacy+0xd3/0x160 [693354.105336] Read of size 4 at addr ffff888be0a35664 by task sh/1453338 [693354.105607] CPU: 41 PID: 1453338 Comm: sh Kdump: loaded Not tainted 4.18.0-147 [693354.105610] Hardware name: Huawei 2288H V5/BC11SPSCB0, BIOS 0.81 07/02/2018 [693354.105612] Call Trace: [693354.105621] dump_stack+0xf1/0x19b [693354.105626] ? show_regs_print_info+0x5/0x5 [693354.105634] ? printk+0x9c/0xc3 [693354.105638] ? cpumask_weight+0x1f/0x1f [693354.105648] print_address_description+0x70/0x360 [693354.105654] kasan_report+0x1b2/0x330 [693354.105659] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105665] ? bfq_io_set_weight_legacy+0xd3/0x160 [693354.105670] bfq_io_set_weight_legacy+0xd3/0x160 [693354.105675] ? bfq_cpd_init+0x20/0x20 [693354.105683] cgroup_file_write+0x3aa/0x510 [693354.105693] ? ___slab_alloc+0x507/0x540 [693354.105698] ? cgroup_file_poll+0x60/0x60 [693354.105702] ? 0xffffffff89600000 [693354.105708] ? usercopy_abort+0x90/0x90 [693354.105716] ? mutex_lock+0xef/0x180 [693354.105726] kernfs_fop_write+0x1ab/0x280 [693354.105732] ? cgroup_file_poll+0x60/0x60 [693354.105738] vfs_write+0xe7/0x230 [693354.105744] ksys_write+0xb0/0x140 [693354.105749] ? __ia32_sys_read+0x50/0x50 [693354.105760] do_syscall_64+0x112/0x370 [693354.105766] ? syscall_return_slowpath+0x260/0x260 [693354.105772] ? do_page_fault+0x9b/0x270 [693354.105779] ? prepare_exit_to_usermode+0xf9/0x1a0 [693354.105784] ? enter_from_user_mode+0x30/0x30 [693354.105793] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.105875] Allocated by task 1453337: [693354.106001] kasan_kmalloc+0xa0/0xd0 [693354.106006] kmem_cache_alloc_node_trace+0x108/0x220 [693354.106010] bfq_pd_alloc+0x96/0x120 [693354.106015] blkcg_activate_policy+0x1b7/0x2b0 [693354.106020] bfq_create_group_hierarchy+0x1e/0x80 [693354.106026] bfq_init_queue+0x678/0x8c0 [693354.106031] blk_mq_init_sched+0x1f8/0x460 [693354.106037] elevator_switch_mq+0xe1/0x240 [693354.106041] elevator_switch+0x25/0x40 [693354.106045] elv_iosched_store+0x1a1/0x230 [693354.106049] queue_attr_store+0x78/0xb0 [693354.106053] kernfs_fop_write+0x1ab/0x280 [693354.106056] vfs_write+0xe7/0x230 [693354.106060] ksys_write+0xb0/0x140 [693354.106064] do_syscall_64+0x112/0x370 [693354.106069] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106114] Freed by task 1453336: [693354.106225] __kasan_slab_free+0x130/0x180 [693354.106229] kfree+0x90/0x1b0 [693354.106233] blkcg_deactivate_policy+0x12c/0x220 [693354.106238] bfq_exit_queue+0xf5/0x110 [693354.106241] blk_mq_exit_sched+0x104/0x130 [693354.106245] __elevator_exit+0x45/0x60 [693354.106249] elevator_switch_mq+0xd6/0x240 [693354.106253] elevator_switch+0x25/0x40 [693354.106257] elv_iosched_store+0x1a1/0x230 [693354.106261] queue_attr_store+0x78/0xb0 [693354.106264] kernfs_fop_write+0x1ab/0x280 [693354.106268] vfs_write+0xe7/0x230 [693354.106271] ksys_write+0xb0/0x140 [693354.106275] do_syscall_64+0x112/0x370 [693354.106280] entry_SYSCALL_64_after_hwframe+0x65/0xca [693354.106329] The buggy address belongs to the object at ffff888be0a35580 which belongs to the cache kmalloc-1k of size 1024 [693354.106736] The buggy address is located 228 bytes inside of 1024-byte region [ffff888be0a35580, ffff888be0a35980) [693354.107114] The buggy address belongs to the page: [693354.107273] page:ffffea002f828c00 count:1 mapcount:0 mapping:ffff888107c17080 index:0x0 compound_mapcount: 0 [693354.107606] flags: 0x17ffffc0008100(slab|head) [693354.107760] raw: 0017ffffc0008100 ffffea002fcbc808 ffffea0030bd3a08 ffff888107c17080 [693354.108020] r ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47379 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix potential NULL pointer dereference devm_add_action_or_reset() can suddenly invoke amd_mp2_pci_remove() at registration that will cause NULL pointer dereference since corresponding data is not initialized yet. The patch moves initialization of data before devm_add_action_or_reset(). Found by Linux Driver Verification project (linuxtesting.org). [jkosina@suse.cz: rebase] | 2024-05-21 | not yet calculated | CVE-2021-47380 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Fix DSP oops stack dump output contents Fix @buf arg given to hex_dump_to_buffer() and stack address used in dump error output. | 2024-05-21 | not yet calculated | CVE-2021-47381 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix deadlock during failing recovery Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed taking discipline_mutex inside qeth_do_reset(), fixing potential deadlocks. An error path was missed though, that still takes discipline_mutex and thus has the original deadlock potential. Intermittent deadlocks were seen when a qeth channel path is configured offline, causing a race between qeth_do_reset and ccwgroup_remove. Call qeth_set_offline() directly in the qeth_do_reset() error case and then a new variant of ccwgroup_set_offline(), without taking discipline_mutex. | 2024-05-21 | not yet calculated | CVE-2021-47382 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tty: Fix out-of-bound vmalloc access in imageblit This issue happens when a userspace program does an ioctl FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct containing only the fields xres, yres, and bits_per_pixel with values. If this struct is the same as the previous ioctl, the vc_resize() detects it and doesn't call the resize_screen(), leaving the fb_var_screeninfo incomplete. And this leads to the updatescrollmode() calculates a wrong value to fbcon_display->vrows, which makes the real_y() return a wrong value of y, and that value, eventually, causes the imageblit to access an out-of-bound address value. To solve this issue I made the resize_screen() be called even if the screen does not need any resizing, so it will "fix and fill" the fb_var_screeninfo independently. | 2024-05-21 | not yet calculated | CVE-2021-47383 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field If driver read tmp value sufficient for (tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignments] | 2024-05-21 | not yet calculated | CVE-2021-47384 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multipline alignment] | 2024-05-21 | not yet calculated | CVE-2021-47385 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment] | 2024-05-21 | not yet calculated | CVE-2021-47386 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cpufreq: schedutil: Use kobject release() method to free sugov_tunables The struct sugov_tunables is protected by the kobject, so we can't free it directly. Otherwise we would get a call trace like this: ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30 WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100 Modules linked in: CPU: 3 PID: 720 Comm: a.sh Tainted: G W 5.14.0-rc1-next-20210715-yocto-standard+ #507 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) pc : debug_print_object+0xb8/0x100 lr : debug_print_object+0xb8/0x100 sp : ffff80001ecaf910 x29: ffff80001ecaf910 x28: ffff00011b10b8d0 x27: ffff800011043d80 x26: ffff00011a8f0000 x25: ffff800013cb3ff0 x24: 0000000000000000 x23: ffff80001142aa68 x22: ffff800011043d80 x21: ffff00010de46f20 x20: ffff800013c0c520 x19: ffff800011d8f5b0 x18: 0000000000000010 x17: 6e6968207473696c x16: 5f72656d6974203a x15: 6570797420746365 x14: 6a626f2029302065 x13: 303378302f307830 x12: 2b6e665f72656d69 x11: ffff8000124b1560 x10: ffff800012331520 x9 : ffff8000100ca6b0 x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 0000000000000001 x5 : ffff800011d8c000 x4 : ffff800011d8c740 x3 : 0000000000000000 x2 : ffff0001108301c0 x1 : ab3c90eedf9c0f00 x0 : 0000000000000000 Call trace: debug_print_object+0xb8/0x100 __debug_check_no_obj_freed+0x1c0/0x230 debug_check_no_obj_freed+0x20/0x88 slab_free_freelist_hook+0x154/0x1c8 kfree+0x114/0x5d0 sugov_exit+0xbc/0xc0 cpufreq_exit_governor+0x44/0x90 cpufreq_set_policy+0x268/0x4a8 store_scaling_governor+0xe0/0x128 store+0xc0/0xf0 sysfs_kf_write+0x54/0x80 kernfs_fop_write_iter+0x128/0x1c0 new_sync_write+0xf0/0x190 vfs_write+0x2d4/0x478 ksys_write+0x74/0x100 __arm64_sys_write+0x24/0x30 invoke_syscall.constprop.0+0x54/0xe0 do_el0_svc+0x64/0x158 el0_svc+0x2c/0xb0 el0t_64_sync_handler+0xb0/0xb8 el0t_64_sync+0x198/0x19c irq event stamp: 5518 hardirqs last enabled at (5517): [<ffff8000100cbd7c>] console_unlock+0x554/0x6c8 hardirqs last disabled at (5518): [<ffff800010fc0638>] el1_dbg+0x28/0xa0 softirqs last enabled at (5504): [<ffff8000100106e0>] __do_softirq+0x4d0/0x6c0 softirqs last disabled at (5483): [<ffff800010049548>] irq_exit+0x1b0/0x1b8 So split the original sugov_tunables_free() into two functions, sugov_clear_global_tunables() is just used to clear the global_tunables and the new sugov_tunables_free() is used as kobj_type::release to release the sugov_tunables safely. | 2024-05-21 | not yet calculated | CVE-2021-47387 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mac80211: fix use-after-free in CCMP/GCMP RX When PN checking is done in mac80211, for fragmentation we need to copy the PN to the RX struct so we can later use it to do a comparison, since commit bf30ca922a0c ("mac80211: check defrag PN against current frame"). Unfortunately, in that commit I used the 'hdr' variable without it being necessarily valid, so use-after-free could occur if it was necessary to reallocate (parts of) the frame. Fix this by reloading the variable after the code that results in the reallocations, if any. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401. | 2024-05-21 | not yet calculated | CVE-2021-47388 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: fix missing sev_decommission in sev_receive_start DECOMMISSION the current SEV context if binding an ASID fails after RECEIVE_START. Per AMD's SEV API, RECEIVE_START generates a new guest context and thus needs to be paired with DECOMMISSION: The RECEIVE_START command is the only command other than the LAUNCH_START command that generates a new guest context and guest handle. The missing DECOMMISSION can result in subsequent SEV launch failures, as the firmware leaks memory and might not able to allocate more SEV guest contexts in the future. Note, LAUNCH_START suffered the same bug, but was previously fixed by commit 934002cd660b ("KVM: SVM: Call SEV Guest Decommission if ASID binding fails"). | 2024-05-21 | not yet calculated | CVE-2021-47389 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix stack-out-of-bounds memory access from ioapic_write_indirect() KASAN reports the following issue: BUG: KASAN: stack-out-of-bounds in kvm_make_vcpus_request_mask+0x174/0x440 [kvm] Read of size 8 at addr ffffc9001364f638 by task qemu-kvm/4798 CPU: 0 PID: 4798 Comm: qemu-kvm Tainted: G X --------- --- Hardware name: AMD Corporation DAYTONA_X/DAYTONA_X, BIOS RYM0081C 07/13/2020 Call Trace: dump_stack+0xa5/0xe6 print_address_description.constprop.0+0x18/0x130 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] __kasan_report.cold+0x7f/0x114 ? kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kasan_report+0x38/0x50 kasan_check_range+0xf5/0x1d0 kvm_make_vcpus_request_mask+0x174/0x440 [kvm] kvm_make_scan_ioapic_request_mask+0x84/0xc0 [kvm] ? kvm_arch_exit+0x110/0x110 [kvm] ? sched_clock+0x5/0x10 ioapic_write_indirect+0x59f/0x9e0 [kvm] ? static_obj+0xc0/0xc0 ? __lock_acquired+0x1d2/0x8c0 ? kvm_ioapic_eoi_inject_work+0x120/0x120 [kvm] The problem appears to be that 'vcpu_bitmap' is allocated as a single long on stack and it should really be KVM_MAX_VCPUS long. We also seem to clear the lower 16 bits of it with bitmap_zero() for no particular reason (my guess would be that 'bitmap' and 'vcpu_bitmap' variables in kvm_bitmap_or_dest_vcpus() caused the confusion: while the later is indeed 16-bit long, the later should accommodate all possible vCPUs). | 2024-05-21 | not yet calculated | CVE-2021-47390 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests The FSM can run in a circle allowing rdma_resolve_ip() to be called twice on the same id_priv. While this cannot happen without going through the work, it violates the invariant that the same address resolution background request cannot be active twice. CPU 1 CPU 2 rdma_resolve_addr(): RDMA_CM_IDLE -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) #1 process_one_req(): for #1 addr_handler(): RDMA_CM_ADDR_QUERY -> RDMA_CM_ADDR_BOUND mutex_unlock(&id_priv->handler_mutex); [.. handler still running ..] rdma_resolve_addr(): RDMA_CM_ADDR_BOUND -> RDMA_CM_ADDR_QUERY rdma_resolve_ip(addr_handler) !! two requests are now on the req_list rdma_destroy_id(): destroy_id_handler_unlock(): _destroy_id(): cma_cancel_operation(): rdma_addr_cancel() // process_one_req() self removes it spin_lock_bh(&lock); cancel_delayed_work(&req->work); if (!list_empty(&req->list)) == true ! rdma_addr_cancel() returns after process_on_req #1 is done kfree(id_priv) process_one_req(): for #2 addr_handler(): mutex_lock(&id_priv->handler_mutex); !! Use after free on id_priv rdma_addr_cancel() expects there to be one req on the list and only cancels the first one. The self-removal behavior of the work only happens after the handler has returned. This yields a situations where the req_list can have two reqs for the same "handle" but rdma_addr_cancel() only cancels the first one. The second req remains active beyond rdma_destroy_id() and will use-after-free id_priv once it inevitably triggers. Fix this by remembering if the id_priv has called rdma_resolve_ip() and always cancel before calling it again. This ensures the req_list never gets more than one item in it and doesn't cost anything in the normal flow that never uses this strange error path. | 2024-05-21 | not yet calculated | CVE-2021-47391 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure If cma_listen_on_all() fails it leaves the per-device ID still on the listen_list but the state is not set to RDMA_CM_ADDR_BOUND. When the cmid is eventually destroyed cma_cancel_listens() is not called due to the wrong state, however the per-device IDs are still holding the refcount preventing the ID from being destroyed, thus deadlocking: task:rping state:D stack: 0 pid:19605 ppid: 47036 flags:0x00000084 Call Trace: __schedule+0x29a/0x780 ? free_unref_page_commit+0x9b/0x110 schedule+0x3c/0xa0 schedule_timeout+0x215/0x2b0 ? __flush_work+0x19e/0x1e0 wait_for_completion+0x8d/0xf0 _destroy_id+0x144/0x210 [rdma_cm] ucma_close_id+0x2b/0x40 [rdma_ucm] __destroy_id+0x93/0x2c0 [rdma_ucm] ? __xa_erase+0x4a/0xa0 ucma_destroy_id+0x9a/0x120 [rdma_ucm] ucma_write+0xb8/0x130 [rdma_ucm] vfs_write+0xb4/0x250 ksys_write+0xb5/0xd0 ? syscall_trace_enter.isra.19+0x123/0x190 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Ensure that cma_listen_on_all() atomically unwinds its action under the lock during error. | 2024-05-21 | not yet calculated | CVE-2021-47392 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc .. | 2024-05-21 | not yet calculated | CVE-2021-47393 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unlink table before deleting it syzbot reports following UAF: BUG: KASAN: use-after-free in memcmp+0x18f/0x1c0 lib/string.c:955 nla_strcmp+0xf2/0x130 lib/nlattr.c:836 nft_table_lookup.part.0+0x1a2/0x460 net/netfilter/nf_tables_api.c:570 nft_table_lookup net/netfilter/nf_tables_api.c:4064 [inline] nf_tables_getset+0x1b3/0x860 net/netfilter/nf_tables_api.c:4064 nfnetlink_rcv_msg+0x659/0x13f0 net/netfilter/nfnetlink.c:285 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 Problem is that all get operations are lockless, so the commit_mutex held by nft_rcv_nl_event() isn't enough to stop a parallel GET request from doing read-accesses to the table object even after synchronize_rcu(). To avoid this, unlink the table first and store the table objects in on-stack scratch space. | 2024-05-21 | not yet calculated | CVE-2021-47394 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap routine in order to fix the following warning reported by syzbot: WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 Modules linked in: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [inline] __bpf_redirect_no_mac net/core/filter.c:2139 [inline] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline] __bpf_prog_run include/linux/filter.h:624 [inline] bpf_prog_run include/linux/filter.h:631 [inline] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline] __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 | 2024-05-21 | not yet calculated | CVE-2021-47395 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mac80211-hwsim: fix late beacon hrtimer handling Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx that our handling of the hrtimer here is wrong: If the timer fires late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot) then it tries to actually rearm the timer at the next deadline, which might be in the past already: 1 2 3 N N+1 | | | ... | | ^ intended to fire here (1) ^ next deadline here (2) ^ actually fired here The next time it fires, it's later, but will still try to schedule for the next deadline (now 3), etc. until it catches up with N, but that might take a long time, causing stalls etc. Now, all of this is simulation, so we just have to fix it, but note that the behaviour is wrong even per spec, since there's no value then in sending all those beacons unaligned - they should be aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a bit (or a lot) late, then just resume at that point. Therefore, change the code to use hrtimer_forward_now() which will ensure that the next firing of the timer would be at N+1 (in the picture), i.e. the next interval point after the current time. | 2024-05-21 | not yet calculated | CVE-2021-47396 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb We should always check if skb_header_pointer's return is NULL before using it, otherwise it may cause null-ptr-deref, as syzbot reported: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline] RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196 Call Trace: <IRQ> sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109 ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422 ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297 | 2024-05-21 | not yet calculated | CVE-2021-47397 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix kernel pointer leak Pointers should be printed with %p or %px rather than cast to 'unsigned long long' and printed with %llx. Change %llx to %p to print the secured pointer. | 2024-05-21 | not yet calculated | CVE-2021-47398 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues. | 2024-05-21 | not yet calculated | CVE-2021-47399 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: hns3: do not allow call hns3_nic_net_open repeatedly hns3_nic_net_open() is not allowed to called repeatly, but there is no checking for this. When doing device reset and setup tc concurrently, there is a small oppotunity to call hns3_nic_net_open repeatedly, and cause kernel bug by calling napi_enable twice. The calltrace information is like below: [ 3078.222780] ------------[ cut here ]------------ [ 3078.230255] kernel BUG at net/core/dev.c:6991! [ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1 [ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021 [ 3078.276801] Workqueue: hclge hclge_service_task [hclge] [ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 3078.296168] pc : napi_enable+0x80/0x84 tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3] [ 3078.314771] sp : ffff8000108abb20 [ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300 [ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000 [ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880 [ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000 [ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930 [ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4 [ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8 [ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344 [ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938 [ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0 [ 3078.414657] Call trace: [ 3078.418517] napi_enable+0x80/0x84 [ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3] [ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3] [ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge] [ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge] [ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge] [ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge] [ 3078.475675] process_one_work+0x1dc/0x48c [ 3078.481888] worker_thread+0x15c/0x464 [ 3078.487104] kthread+0x160/0x170 [ 3078.492479] ret_from_fork+0x10/0x18 [ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000) [ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]--- Once hns3_nic_net_open() is excute success, the flag HNS3_NIC_STATE_DOWN will be cleared. So add checking for this flag, directly return when HNS3_NIC_STATE_DOWN is no set. | 2024-05-21 | not yet calculated | CVE-2021-47400 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix stack information leak The tty driver name is used also after registering the driver and must specifically not be allocated on the stack to avoid leaking information to user space (or triggering an oops). Drivers should not try to encode topology information in the tty device name but this one snuck in through staging without anyone noticing and another driver has since copied this malpractice. Fixing the ABI is a separate issue, but this at least plugs the security hole. | 2024-05-21 | not yet calculated | CVE-2021-47401 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: sched: flower: protect fl_walk() with rcu Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul() also removed rcu protection of individual filters which causes following use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain rcu read lock while iterating and taking the filter reference and temporary release the lock while calling arg->fn() callback that can sleep. KASAN trace: [ 352.773640] ================================================================== [ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower] [ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987 [ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2 [ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 352.781022] Call Trace: [ 352.781573] dump_stack_lvl+0x46/0x5a [ 352.782332] print_address_description.constprop.0+0x1f/0x140 [ 352.783400] ? fl_walk+0x159/0x240 [cls_flower] [ 352.784292] ? fl_walk+0x159/0x240 [cls_flower] [ 352.785138] kasan_report.cold+0x83/0xdf [ 352.785851] ? fl_walk+0x159/0x240 [cls_flower] [ 352.786587] kasan_check_range+0x145/0x1a0 [ 352.787337] fl_walk+0x159/0x240 [cls_flower] [ 352.788163] ? fl_put+0x10/0x10 [cls_flower] [ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.790102] tcf_chain_dump+0x231/0x450 [ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170 [ 352.791833] ? __might_sleep+0x2e/0xc0 [ 352.792594] ? tfilter_notify+0x170/0x170 [ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.794477] tc_dump_tfilter+0x385/0x4b0 [ 352.795262] ? tc_new_tfilter+0x1180/0x1180 [ 352.796103] ? __mod_node_page_state+0x1f/0xc0 [ 352.796974] ? __build_skb_around+0x10e/0x130 [ 352.797826] netlink_dump+0x2c0/0x560 [ 352.798563] ? netlink_getsockopt+0x430/0x430 [ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220 [ 352.800542] __netlink_dump_start+0x356/0x440 [ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550 [ 352.802190] ? tc_new_tfilter+0x1180/0x1180 [ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.803668] ? tc_new_tfilter+0x1180/0x1180 [ 352.804344] ? _copy_from_iter_nocache+0x800/0x800 [ 352.805202] ? kasan_set_track+0x1c/0x30 [ 352.805900] netlink_rcv_skb+0xc6/0x1f0 [ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0 [ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0 [ 352.808324] ? netlink_ack+0x4d0/0x4d0 [ 352.809086] ? netlink_deliver_tap+0x62/0x3d0 [ 352.809951] netlink_unicast+0x353/0x480 [ 352.810744] ? netlink_attachskb+0x430/0x430 [ 352.811586] ? __alloc_skb+0xd7/0x200 [ 352.812349] netlink_sendmsg+0x396/0x680 [ 352.813132] ? netlink_unicast+0x480/0x480 [ 352.813952] ? __import_iovec+0x192/0x210 [ 352.814759] ? netlink_unicast+0x480/0x480 [ 352.815580] sock_sendmsg+0x6c/0x80 [ 352.816299] ____sys_sendmsg+0x3a5/0x3c0 [ 352.817096] ? kernel_sendmsg+0x30/0x30 [ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150 [ 352.818753] ___sys_sendmsg+0xd8/0x140 [ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110 [ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0 [ 352.821110] ? __copy_msghdr_from_user+0x260/0x260 [ 352.821934] ? _raw_spin_lock+0x81/0xd0 [ 352.822680] ? __handle_mm_fault+0xef3/0x1b20 [ 352.823549] ? rb_insert_color+0x2a/0x270 [ 352.824373] ? copy_page_range+0x16b0/0x16b0 [ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0 [ 352.826190] ? __fget_light+0xd9/0xf0 [ 352.826941] __sys_sendmsg+0xb3/0x130 [ 352.827613] ? __sys_sendmsg_sock+0x20/0x20 [ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0 [ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60 [ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160 [ 352.830845] do_syscall_64+0x35/0x80 [ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 352.832331] RIP: 0033:0x7f7bee973c17 [ ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47402 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix module reference leak A reference to the carrier module was taken on every open but was only released once when the final reference to the tty struct was dropped. Fix this by taking the module reference and initialising the tty driver data when installing the tty. | 2024-05-21 | not yet calculated | CVE-2021-47403 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: HID: betop: fix slab-out-of-bounds Write in betop_probe Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver. The problem is the driver assumes the device must have an input report but some malicious devices violate this assumption. So this patch checks hid_device's input is non empty before it's been used. | 2024-05-21 | not yet calculated | CVE-2021-47404 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: free raw_report buffers in usbhid_stop Free the unsent raw_report buffers when the device is removed. Fixes a memory leak reported by syzbot at: https://syzkaller.appspot.com/bug?id=7b4fa7cb1a7c2d3342a2a8a6c53371c8c418ab47 | 2024-05-21 | not yet calculated | CVE-2021-47405 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ext4: add error checking to ext4_ext_replay_set_iblocks() If the call to ext4_map_blocks() fails due to an corrupted file system, ext4_ext_replay_set_iblocks() can get stuck in an infinite loop. This could be reproduced by running generic/526 with a file system that has inline_data and fast_commit enabled. The system will repeatedly log to the console: EXT4-fs warning (device dm-3): ext4_block_to_path:105: block 1074800922 > max in inode 131076 and the stack that it gets stuck in is: ext4_block_to_path+0xe3/0x130 ext4_ind_map_blocks+0x93/0x690 ext4_map_blocks+0x100/0x660 skip_hole+0x47/0x70 ext4_ext_replay_set_iblocks+0x223/0x440 ext4_fc_replay_inode+0x29e/0x3b0 ext4_fc_replay+0x278/0x550 do_one_pass+0x646/0xc10 jbd2_journal_recover+0x14a/0x270 jbd2_journal_load+0xc4/0x150 ext4_load_journal+0x1f3/0x490 ext4_fill_super+0x22d4/0x2c00 With this patch, generic/526 still fails, but system is no longer locking up in a tight loop. It's likely the root casue is that fast_commit replay is corrupting file systems with inline_data, and we probably need to add better error handling in the fast commit replay code path beyond what is done here, which essentially just breaks the infinite loop without reporting the to the higher levels of the code. | 2024-05-21 | not yet calculated | CVE-2021-47406 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Handle SRCU initialization failure during page track init Check the return of init_srcu_struct(), which can fail due to OOM, when initializing the page track mechanism. Lack of checking leads to a NULL pointer deref found by a modified syzkaller. [Move the call towards the beginning of kvm_arch_init_vm. - Paolo] | 2024-05-21 | not yet calculated | CVE-2021-47407 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: serialize hash resizes and cleanups Syzbot was able to trigger the following warning [1] No repro found by syzbot yet but I was able to trigger similar issue by having 2 scripts running in parallel, changing conntrack hash sizes, and: for j in `seq 1 1000` ; do unshare -n /bin/true >/dev/null ; done It would take more than 5 minutes for net_namespace structures to be cleaned up. This is because nf_ct_iterate_cleanup() has to restart everytime a resize happened. By adding a mutex, we can serialize hash resizes and cleanups and also make get_next_corpse() faster by skipping over empty buckets. Even without resizes in the picture, this patch considerably speeds up network namespace dismantles. [1] INFO: task syz-executor.0:8312 can't die for more than 144 seconds. task:syz-executor.0 state:R running task stack:25672 pid: 8312 ppid: 6573 flags:0x00004006 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 preempt_schedule_common+0x45/0xc0 kernel/sched/core.c:6408 preempt_schedule_thunk+0x16/0x18 arch/x86/entry/thunk_64.S:35 __local_bh_enable_ip+0x109/0x120 kernel/softirq.c:390 local_bh_enable include/linux/bottom_half.h:32 [inline] get_next_corpse net/netfilter/nf_conntrack_core.c:2252 [inline] nf_ct_iterate_cleanup+0x15a/0x450 net/netfilter/nf_conntrack_core.c:2275 nf_conntrack_cleanup_net_list+0x14c/0x4f0 net/netfilter/nf_conntrack_core.c:2469 ops_exit_list+0x10d/0x160 net/core/net_namespace.c:171 setup_net+0x639/0xa30 net/core/net_namespace.c:349 copy_net_ns+0x319/0x760 net/core/net_namespace.c:470 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:226 ksys_unshare+0x445/0x920 kernel/fork.c:3128 __do_sys_unshare kernel/fork.c:3202 [inline] __se_sys_unshare kernel/fork.c:3200 [inline] __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3200 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f63da68e739 RSP: 002b:00007f63d7c05188 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f63da792f80 RCX: 00007f63da68e739 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000040000000 RBP: 00007f63da6e8cc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f63da792f80 R13: 00007fff50b75d3f R14: 00007f63d7c05300 R15: 0000000000022000 Showing all locks held in the system: 1 lock held by khungtaskd/27: #0: ffffffff8b980020 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6446 2 locks held by kworker/u4:2/153: #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: arch_atomic_long_set include/linux/atomic/atomic-long.h:41 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: atomic_long_set include/linux/atomic/atomic-instrumented.h:1198 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_data kernel/workqueue.c:634 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: set_work_pool_and_clear_pending kernel/workqueue.c:661 [inline] #0: ffff888010c69138 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x896/0x1690 kernel/workqueue.c:2268 #1: ffffc9000140fdb0 ((kfence_timer).work){+.+.}-{0:0}, at: process_one_work+0x8ca/0x1690 kernel/workqueue.c:2272 1 lock held by systemd-udevd/2970: 1 lock held by in:imklog/6258: #0: ffff88807f970ff0 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:990 3 locks held by kworker/1:6/8158: 1 lock held by syz-executor.0/8312: 2 locks held by kworker/u4:13/9320: 1 lock held by ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47408 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. | 2024-05-21 | not yet calculated | CVE-2021-47409 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix svm_migrate_fini warning Device manager releases device-specific resources when a driver disconnects from a device, devm_memunmap_pages and devm_release_mem_region calls in svm_migrate_fini are redundant. It causes below warning trace after patch "drm/amdgpu: Split amdgpu_device_fini into early and late", so remove function svm_migrate_fini. BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718 WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795 devm_release_action+0x51/0x60 Call Trace: ? memunmap_pages+0x360/0x360 svm_migrate_fini+0x2d/0x60 [amdgpu] kgd2kfd_device_exit+0x23/0xa0 [amdgpu] amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu] amdgpu_device_fini_sw+0x45/0x290 [amdgpu] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] drm_dev_release+0x20/0x40 [drm] release_nodes+0x196/0x1e0 device_release_driver_internal+0x104/0x1d0 driver_detach+0x47/0x90 bus_remove_driver+0x7a/0xd0 pci_unregister_driver+0x3d/0x90 amdgpu_exit+0x11/0x20 [amdgpu] | 2024-05-21 | not yet calculated | CVE-2021-47410 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: block: don't call rq_qos_ops->done_bio if the bio isn't tracked rq_qos framework is only applied on request based driver, so: 1) rq_qos_done_bio() needn't to be called for bio based driver 2) rq_qos_done_bio() needn't to be called for bio which isn't tracked, such as bios ended from error handling code. Especially in bio_endio(): 1) request queue is referred via bio->bi_bdev->bd_disk->queue, which may be gone since request queue refcount may not be held in above two cases 2) q->rq_qos may be freed in blk_cleanup_queue() when calling into __rq_qos_done_bio() Fix the potential kernel panic by not calling rq_qos_ops->done_bio if the bio isn't tracked. This way is safe because both ioc_rqos_done_bio() and blkcg_iolatency_done_bio() are nop if the bio isn't tracked. | 2024-05-21 | not yet calculated | CVE-2021-47412 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board. | 2024-05-21 | not yet calculated | CVE-2021-47413 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: riscv: Flush current cpu icache before other cpus On SiFive Unmatched, I recently fell onto the following BUG when booting: [ 0.000000] ftrace: allocating 36610 entries in 144 pages [ 0.000000] Oops - illegal instruction [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.13.1+ #5 [ 0.000000] Hardware name: SiFive HiFive Unmatched A00 (DT) [ 0.000000] epc : riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] ra : __sbi_rfence_v02+0xc8/0x10a [ 0.000000] epc : ffffffff80007240 ra : ffffffff80009964 sp : ffffffff81803e10 [ 0.000000] gp : ffffffff81a1ea70 tp : ffffffff8180f500 t0 : ffffffe07fe30000 [ 0.000000] t1 : 0000000000000004 t2 : 0000000000000000 s0 : ffffffff81803e60 [ 0.000000] s1 : 0000000000000000 a0 : ffffffff81a22238 a1 : ffffffff81803e10 [ 0.000000] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.000000] a5 : 0000000000000000 a6 : ffffffff8000989c a7 : 0000000052464e43 [ 0.000000] s2 : ffffffff81a220c8 s3 : 0000000000000000 s4 : 0000000000000000 [ 0.000000] s5 : 0000000000000000 s6 : 0000000200000100 s7 : 0000000000000001 [ 0.000000] s8 : ffffffe07fe04040 s9 : ffffffff81a22c80 s10: 0000000000001000 [ 0.000000] s11: 0000000000000004 t3 : 0000000000000001 t4 : 0000000000000008 [ 0.000000] t5 : ffffffcf04000808 t6 : ffffffe3ffddf188 [ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000002 [ 0.000000] [<ffffffff80007240>] riscv_cpuid_to_hartid_mask+0x6/0xae [ 0.000000] [<ffffffff80009474>] sbi_remote_fence_i+0x1e/0x26 [ 0.000000] [<ffffffff8000b8f4>] flush_icache_all+0x12/0x1a [ 0.000000] [<ffffffff8000666c>] patch_text_nosync+0x26/0x32 [ 0.000000] [<ffffffff8000884e>] ftrace_init_nop+0x52/0x8c [ 0.000000] [<ffffffff800f051e>] ftrace_process_locs.isra.0+0x29c/0x360 [ 0.000000] [<ffffffff80a0e3c6>] ftrace_init+0x80/0x130 [ 0.000000] [<ffffffff80a00f8c>] start_kernel+0x5c4/0x8f6 [ 0.000000] ---[ end trace f67eb9af4d8d492b ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- While ftrace is looping over a list of addresses to patch, it always failed when patching the same function: riscv_cpuid_to_hartid_mask. Looking at the backtrace, the illegal instruction is encountered in this same function. However, patch_text_nosync, after patching the instructions, calls flush_icache_range. But looking at what happens in this function: flush_icache_range -> flush_icache_all -> sbi_remote_fence_i -> __sbi_rfence_v02 -> riscv_cpuid_to_hartid_mask The icache and dcache of the current cpu are never synchronized between the patching of riscv_cpuid_to_hartid_mask and calling this same function. So fix this by flushing the current cpu's icache before asking for the other cpus to do the same. | 2024-05-21 | not yet calculated | CVE-2021-47414 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: iwlwifi: mvm: Fix possible NULL dereference In __iwl_mvm_remove_time_event() check that 'te_data->vif' is NULL before dereferencing it. | 2024-05-21 | not yet calculated | CVE-2021-47415 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: phy: mdio: fix memory leak Syzbot reported memory leak in MDIO bus interface, the problem was in wrong state logic. MDIOBUS_ALLOCATED indicates 2 states: 1. Bus is only allocated 2. Bus allocated and __mdiobus_register() fails, but device_register() was called In case of device_register() has been called we should call put_device() to correctly free the memory allocated for this device, but mdiobus_free() calls just kfree(dev) in case of MDIOBUS_ALLOCATED state To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED _before_ calling device_register(), because put_device() should be called even in case of device_register() failure. | 2024-05-21 | not yet calculated | CVE-2021-47416 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: libbpf: Fix memory leak in strset Free struct strset itself, not just its internal parts. | 2024-05-21 | not yet calculated | CVE-2021-47417 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net_sched: fix NULL deref in fifo_set_limit() syzbot reported another NULL deref in fifo_set_limit() [1] I could repro the issue with : unshare -n tc qd add dev lo root handle 1:0 tbf limit 200000 burst 70000 rate 100Mbit tc qd replace dev lo parent 1:0 pfifo_fast tc qd change dev lo root handle 1:0 tbf limit 300000 burst 70000 rate 100Mbit pfifo_fast does not have a change() operation. Make fifo_set_limit() more robust about this. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 1cf99067 P4D 1cf99067 PUD 7ca49067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14443 Comm: syz-executor959 Not tainted 5.15.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffffc9000e2f7310 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff8d6ecc00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888024c27910 RDI: ffff888071e34000 RBP: ffff888071e34000 R08: 0000000000000001 R09: ffffffff8fcfb947 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888024c27910 R13: ffff888071e34018 R14: 0000000000000000 R15: ffff88801ef74800 FS: 00007f321d897700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000722c3000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: fifo_set_limit net/sched/sch_fifo.c:242 [inline] fifo_set_limit+0x198/0x210 net/sched/sch_fifo.c:227 tbf_change+0x6ec/0x16d0 net/sched/sch_tbf.c:418 qdisc_change net/sched/sch_api.c:1332 [inline] tc_modify_qdisc+0xd9a/0x1a60 net/sched/sch_api.c:1634 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae | 2024-05-21 | not yet calculated | CVE-2021-47418 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: properly cancel timer from taprio_destroy() There is a comment in qdisc_create() about us not calling ops->reset() in some cases. err_out4: /* * Any broken qdiscs that would require a ops->reset() here? * The qdisc was never in action so it shouldn't be necessary. */ As taprio sets a timer before actually receiving a packet, we need to cancel it from ops->destroy, just in case ops->reset has not been called. syzbot reported: ODEBUG: free active (active state 0) object type: hrtimer hint: advance_sched+0x0/0x9a0 arch/x86/include/asm/atomic64_64.h:22 WARNING: CPU: 0 PID: 8441 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 8441 Comm: syz-executor813 Not tainted 5.14.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd e0 d3 e3 89 4c 89 ee 48 c7 c7 e0 c7 e3 89 e8 5b 86 11 05 <0f> 0b 83 05 85 03 92 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000130f330 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff88802baeb880 RSI: ffffffff815d87b5 RDI: fffff52000261e58 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815d25ee R11: 0000000000000000 R12: ffffffff898dd020 R13: ffffffff89e3ce20 R14: ffffffff81653630 R15: dffffc0000000000 FS: 0000000000f0d300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffb64b3e000 CR3: 0000000036557000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __debug_check_no_obj_freed lib/debugobjects.c:987 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1018 slab_free_hook mm/slub.c:1603 [inline] slab_free_freelist_hook+0x171/0x240 mm/slub.c:1653 slab_free mm/slub.c:3213 [inline] kfree+0xe4/0x540 mm/slub.c:4267 qdisc_create+0xbcf/0x1320 net/sched/sch_api.c:1299 tc_modify_qdisc+0x4c8/0x1a60 net/sched/sch_api.c:1663 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2403 ___sys_sendmsg+0xf3/0x170 net/socket.c:2457 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 | 2024-05-21 | not yet calculated | CVE-2021-47419 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix a potential ttm->sg memory leak Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr, but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it! | 2024-05-21 | not yet calculated | CVE-2021-47420 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen. | 2024-05-21 | not yet calculated | CVE-2021-47421 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/kms/nv50-: fix file release memory leak When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. | 2024-05-21 | not yet calculated | CVE-2021-47422 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/debugfs: fix file release memory leak When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. | 2024-05-21 | not yet calculated | CVE-2021-47423 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: i40e: Fix freeing of uninitialized misc IRQ vector When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized. | 2024-05-21 | not yet calculated | CVE-2021-47424 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: i2c: acpi: fix resource leak in reconfiguration device addition acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a reference on the adapter which is never released which will result in a reference count leak and render the adapter unremovable. Make sure to put the adapter after creating the client in the same manner that we do for OF. [wsa: fixed title] | 2024-05-21 | not yet calculated | CVE-2021-47425 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Fix potential memory leak about jit_data Make sure to free jit_data through kfree() in the error path. | 2024-05-21 | not yet calculated | CVE-2021-47426 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi: Fix iscsi_task use after free Commit d39df158518c ("scsi: iscsi: Have abort handler get ref to conn") added iscsi_get_conn()/iscsi_put_conn() calls during abort handling but then also changed the handling of the case where we detect an already completed task where we now end up doing a goto to the common put/cleanup code. This results in a iscsi_task use after free, because the common cleanup code will do a put on the iscsi_task. This reverts the goto and moves the iscsi_get_conn() to after we've checked if the iscsi_task is valid. | 2024-05-21 | not yet calculated | CVE-2021-47427 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: fix program check interrupt emergency stack path Emergency stack path was jumping into a 3: label inside the __GEN_COMMON_BODY macro for the normal path after it had finished, rather than jumping over it. By a small miracle this is the correct place to build up a new interrupt frame with the existing stack pointer, so things basically worked okay with an added weird looking 700 trap frame on top (which had the wrong ->nip so it didn't decode bug messages either). Fix this by avoiding using numeric labels when jumping over non-trivial macros. Before: LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: sh Not tainted 5.15.0-rc2-00034-ge057cdade6e5 #2637 NIP: 7265677368657265 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3a50 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 00000700 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 c0000000fffb3cf0 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [7265677368657265] 0x7265677368657265 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 Call Trace: [c0000000fffb3cf0] [c00000000000bdac] soft_nmi_common+0x13c/0x1d0 (unreliable) --- interrupt: 700 at decrementer_common_virt+0xb8/0x230 NIP: c0000000000098b8 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 22424282 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 0000000000002400 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 --- interrupt: 700 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 6d28218e0cc3c949 ]--- After: ------------[ cut here ]------------ kernel BUG at arch/powerpc/kernel/exceptions-64s.S:491! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: login Not tainted 5.15.0-rc2-00034-ge057cdade6e5-dirty #2638 NIP: c0000000000098b8 LR: c00000000006bf04 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 24482227 XER: 00040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006bf04 0000000000002400 c000000001513800 c000000001271868 GPR04: 00000000100f0d29 0000000042000000 0000000000000007 0000000000000009 GPR08: 00000000100f0d29 0000000024482227 0000000000002710 c000000000181b3c GPR12: 9000000000009033 c0000000016b0000 00000000100f0d29 c000000005b22f00 GPR16: 00000000ffff0000 0000000000000001 0000000000000009 00000000100eed90 GPR20: 00000000100eed90 00000 ---truncated--- | 2024-05-21 | not yet calculated | CVE-2021-47428 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix unrecoverable MCE calling async handler from NMI The machine check handler is not considered NMI on 64s. The early handler is the true NMI handler, and then it schedules the machine_check_exception handler to run when interrupts are enabled. This works fine except the case of an unrecoverable MCE, where the true NMI is taken when MSR[RI] is clear, it can not recover, so it calls machine_check_exception directly so something might be done about it. Calling an async handler from NMI context can result in irq state and other things getting corrupted. This can also trigger the BUG at arch/powerpc/include/asm/interrupt.h:168 BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE)); Fix this by making an _async version of the handler which is called in the normal case, and a NMI version that is called for unrecoverable interrupts. | 2024-05-21 | not yet calculated | CVE-2021-47429 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n Commit 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks") added a warning if AC is set when in the kernel. Commit 662a0221893a3d ("x86/entry: Fix AC assertion") changed the warning to only fire if the CPU supports SMAP. However, the warning can still trigger on a machine that supports SMAP but where it's disabled in the kernel config and when running the syscall_nt selftest, for example: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 49 at irqentry_enter_from_user_mode CPU: 0 PID: 49 Comm: init Tainted: G T 5.15.0-rc4+ #98 e6202628ee053b4f310759978284bd8bb0ce6905 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:irqentry_enter_from_user_mode ... Call Trace: ? irqentry_enter ? exc_general_protection ? asm_exc_general_protection ? asm_exc_general_protectio IS_ENABLED(CONFIG_X86_SMAP) could be added to the warning condition, but even this would not be enough in case SMAP is disabled at boot time with the "nosmap" parameter. To be consistent with "nosmap" behaviour, clear X86_FEATURE_SMAP when !CONFIG_X86_SMAP. Found using entry-fuzz + satrandconfig. [ bp: Massage commit message. ] | 2024-05-21 | not yet calculated | CVE-2021-47430 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix gart.bo pin_count leak gmc_v{9,10}_0_gart_disable() isn't called matched with correspoding gart_enbale function in SRIOV case. This will lead to gart.bo pin_count leak on driver unload. | 2024-05-21 | not yet calculated | CVE-2021-47431 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: lib/generic-radix-tree.c: Don't overflow in peek() When we started spreading new inode numbers throughout most of the 64 bit inode space, that triggered some corner case bugs, in particular some integer overflows related to the radix tree code. Oops. | 2024-05-21 | not yet calculated | CVE-2021-47432 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix abort logic in btrfs_replace_file_extents Error injection testing uncovered a case where we'd end up with a corrupt file system with a missing extent in the middle of a file. This occurs because the if statement to decide if we should abort is wrong. The only way we would abort in this case is if we got a ret != -EOPNOTSUPP and we called from the file clone code. However the prealloc code uses this path too. Instead we need to abort if there is an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only if we came from the clone file code. | 2024-05-22 | not yet calculated | CVE-2021-47433 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: xhci: Fix command ring pointer corruption while aborting a command The command ring pointer is located at [6:63] bits of the command ring control register (CRCR). All the control bits like command stop, abort are located at [0:3] bits. While aborting a command, we read the CRCR and set the abort bit and write to the CRCR. The read will always give command ring pointer as all zeros. So we essentially write only the control bits. Since we split the 64 bit write into two 32 bit writes, there is a possibility of xHC command ring stopped before the upper dword (all zeros) is written. If that happens, xHC updates the upper dword of its internal command ring pointer with all zeros. Next time, when the command ring is restarted, we see xHC memory access failures. Fix this issue by only writing to the lower dword of CRCR where all control bits are located. | 2024-05-22 | not yet calculated | CVE-2021-47434 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: dm: fix mempool NULL pointer race when completing IO dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io(). | 2024-05-22 | not yet calculated | CVE-2021-47435 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: musb: dsps: Fix the probe error path Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") has inverted the calls to dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without updating correctly the error path. dsps_create_musb_pdev() allocates and registers a new platform device which must be unregistered and freed with platform_device_unregister(), and this is missing upon dsps_setup_optional_vbus_irq() error. While on the master branch it seems not to trigger any issue, I observed a kernel crash because of a NULL pointer dereference with a v5.10.70 stable kernel where the patch mentioned above was backported. With this kernel version, -EPROBE_DEFER is returned the first time dsps_setup_optional_vbus_irq() is called which triggers the probe to error out without unregistering the platform device. Unfortunately, on the Beagle Bone Black Wireless, the platform device still living in the system is being used by the USB Ethernet gadget driver, which during the boot phase triggers the crash. My limited knowledge of the musb world prevents me to revert this commit which was sent to silence a robot warning which, as far as I understand, does not make sense. The goal of this patch was to prevent an IRQ to fire before the platform device being registered. I think this cannot ever happen due to the fact that enabling the interrupts is done by the ->enable() callback of the platform musb device, and this platform device must be already registered in order for the core or any other user to use this callback. Hence, I decided to fix the error path, which might prevent future errors on mainline kernels while also fixing older ones. | 2024-05-22 | not yet calculated | CVE-2021-47436 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: iio: adis16475: fix deadlock on frequency set With commit 39c024b51b560 ("iio: adis16475: improve sync scale mode handling"), two deadlocks were introduced: 1) The call to 'adis_write_reg_16()' was not changed to it's unlocked version. 2) The lock was not being released on the success path of the function. This change fixes both these issues. | 2024-05-22 | not yet calculated | CVE-2021-47437 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path Prior to this patch in case mlx5_core_destroy_cq() failed it returns without completing all destroy operations and that leads to memory leak. Instead, complete the destroy flow before return error. Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq() to be symmetrical with mlx5_core_create_cq(). kmemleak complains on: unreferenced object 0xc000000038625100 (size 64): comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s) hex dump (first 32 bytes): 60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0 `.H.......4..... 02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0 ..........}..... backtrace: [<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core] [<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core] [<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core] [<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core] [<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core] [<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core] [<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core] [<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230 [mlx5_core] [<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300 [mlx5_core] [<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core] [<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core] [<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0 [<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0 [<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0 [<00000000646c5c2c>] genl_rcv_msg+0x78/0x120 [<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0 | 2024-05-22 | not yet calculated | CVE-2021-47438 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: dsa: microchip: Added the condition for scheduling ksz_mib_read_work When the ksz module is installed and removed using rmmod, kernel crashes with null pointer dereferrence error. During rmmod, ksz_switch_remove function tries to cancel the mib_read_workqueue using cancel_delayed_work_sync routine and unregister switch from dsa. During dsa_unregister_switch it calls ksz_mac_link_down, which in turn reschedules the workqueue since mib_interval is non-zero. Due to which queue executed after mib_interval and it tries to access dp->slave. But the slave is unregistered in the ksz_switch_remove function. Hence kernel crashes. To avoid this crash, before canceling the workqueue, resetted the mib_interval to 0. v1 -> v2: -Removed the if condition in ksz_mib_read_work | 2024-05-22 | not yet calculated | CVE-2021-47439 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: encx24j600: check error in devm_regmap_init_encx24j600 devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty #11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. | 2024-05-22 | not yet calculated | CVE-2021-47440 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mlxsw: thermal: Fix out-of-bounds memory accesses Currently, mlxsw allows cooling states to be set above the maximum cooling state supported by the driver: # cat /sys/class/thermal/thermal_zone2/cdev0/type mlxsw_fan # cat /sys/class/thermal/thermal_zone2/cdev0/max_state 10 # echo 18 > /sys/class/thermal/thermal_zone2/cdev0/cur_state # echo $? 0 This results in out-of-bounds memory accesses when thermal state transition statistics are enabled (CONFIG_THERMAL_STATISTICS=y), as the transition table is accessed with a too large index (state) [1]. According to the thermal maintainer, it is the responsibility of the driver to reject such operations [2]. Therefore, return an error when the state to be set exceeds the maximum cooling state supported by the driver. To avoid dead code, as suggested by the thermal maintainer [3], partially revert commit a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels") that tried to interpret these invalid cooling states (above the maximum) in a special way. The cooling levels array is not removed in order to prevent the fans going below 20% PWM, which would cause them to get stuck at 0% PWM. [1] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x271/0x290 Read of size 4 at addr ffff8881052f7bf8 by task kworker/0:0/5 CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.15.0-rc3-custom-45935-gce1adf704b14 #122 Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2FO"/"SA000874", BIOS 4.6.5 03/08/2016 Workqueue: events_freezable_power_ thermal_zone_device_check Call Trace: dump_stack_lvl+0x8b/0xb3 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b thermal_cooling_device_stats_update+0x271/0x290 __thermal_cdev_update+0x15e/0x4e0 thermal_cdev_update+0x9f/0xe0 step_wise_throttle+0x770/0xee0 thermal_zone_device_update+0x3f6/0xdf0 process_one_work+0xa42/0x1770 worker_thread+0x62f/0x13e0 kthread+0x3ee/0x4e0 ret_from_fork+0x1f/0x30 Allocated by task 1: kasan_save_stack+0x1b/0x40 __kasan_kmalloc+0x7c/0x90 thermal_cooling_device_setup_sysfs+0x153/0x2c0 __thermal_cooling_device_register.part.0+0x25b/0x9c0 thermal_cooling_device_register+0xb3/0x100 mlxsw_thermal_init+0x5c5/0x7e0 __mlxsw_core_bus_device_register+0xcb3/0x19c0 mlxsw_core_bus_device_register+0x56/0xb0 mlxsw_pci_probe+0x54f/0x710 local_pci_probe+0xc6/0x170 pci_device_probe+0x2b2/0x4d0 really_probe+0x293/0xd10 __driver_probe_device+0x2af/0x440 driver_probe_device+0x51/0x1e0 __driver_attach+0x21b/0x530 bus_for_each_dev+0x14c/0x1d0 bus_add_driver+0x3ac/0x650 driver_register+0x241/0x3d0 mlxsw_sp_module_init+0xa2/0x174 do_one_initcall+0xee/0x5f0 kernel_init_freeable+0x45a/0x4de kernel_init+0x1f/0x210 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff8881052f7800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 1016 bytes inside of 1024-byte region [ffff8881052f7800, ffff8881052f7c00) The buggy address belongs to the page: page:0000000052355272 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1052f0 head:0000000052355272 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x200000000010200(slab|head|node=0|zone=2) raw: 0200000000010200 ffffea0005034800 0000000300000003 ffff888100041dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881052f7a80: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc ffff8881052f7b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8881052f7b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff8881052f7c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881052f7c80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [2] https://lore.kernel.org/linux-pm/9aca37cb-1629-5c67- ---truncated--- | 2024-05-22 | not yet calculated | CVE-2021-47441 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: NFC: digital: fix possible memory leak in digital_in_send_sdd_req() 'skb' is allocated in digital_in_send_sdd_req(), but not free when digital_in_send_cmd() failed, which will cause memory leak. Fix it by freeing 'skb' if digital_in_send_cmd() return failed. | 2024-05-22 | not yet calculated | CVE-2021-47442 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: NFC: digital: fix possible memory leak in digital_tg_listen_mdaa() 'params' is allocated in digital_tg_listen_mdaa(), but not free when digital_send_cmd() failed, which will cause memory leak. Fix it by freeing 'params' if digital_send_cmd() return failed. | 2024-05-22 | not yet calculated | CVE-2021-47443 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read In commit e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid corruption test") the function connector_bad_edid() started assuming that the memory for the EDID passed to it was big enough to hold `edid[0x7e] + 1` blocks of data (1 extra for the base block). It completely ignored the fact that the function was passed `num_blocks` which indicated how much memory had been allocated for the EDID. Let's fix this by adding a bounds check. This is important for handling the case where there's an error in the first block of the EDID. In that case we will call connector_bad_edid() without having re-allocated memory based on `edid[0x7e]`. | 2024-05-22 | not yet calculated | CVE-2021-47444 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null pointer dereference on pointer edp The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check") | 2024-05-22 | not yet calculated | CVE-2021-47445 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/msm/a4xx: fix error handling in a4xx_gpu_init() This code returns 1 on error instead of a negative error. It leads to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" cannot be true because "ret" is set to 1. | 2024-05-22 | not yet calculated | CVE-2021-47446 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/msm/a3xx: fix error handling in a3xx_gpu_init() These error paths returned 1 on failure, instead of a negative error code. This would lead to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" did not work because "ret" was set to 1. | 2024-05-22 | not yet calculated | CVE-2021-47447 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mptcp: fix possible stall on recvmsg() recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2 ---truncated--- | 2024-05-22 | not yet calculated | CVE-2021-47448 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ice: fix locking for Tx timestamp tracking flush Commit 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") added a lock around the Tx timestamp tracker flow which is used to cleanup any left over SKBs and prepare for device removal. This lock is problematic because it is being held around a call to ice_clear_phy_tstamp. The clear function takes a mutex to send a PHY write command to firmware. This could lead to a deadlock if the mutex actually sleeps, and causes the following warning on a kernel with preemption debugging enabled: [ 715.419426] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:573 [ 715.427900] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 3100, name: rmmod [ 715.435652] INFO: lockdep is turned off. [ 715.439591] Preemption disabled at: [ 715.439594] [<0000000000000000>] 0x0 [ 715.446678] CPU: 52 PID: 3100 Comm: rmmod Tainted: G W OE 5.15.0-rc4+ #42 bdd7ec3018e725f159ca0d372ce8c2c0e784891c [ 715.458058] Hardware name: Intel Corporation S2600STQ/S2600STQ, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ 715.468483] Call Trace: [ 715.470940] dump_stack_lvl+0x6a/0x9a [ 715.474613] ___might_sleep.cold+0x224/0x26a [ 715.478895] __mutex_lock+0xb3/0x1440 [ 715.482569] ? stack_depot_save+0x378/0x500 [ 715.486763] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.494979] ? kfree+0xc1/0x520 [ 715.498128] ? mutex_lock_io_nested+0x12a0/0x12a0 [ 715.502837] ? kasan_set_free_info+0x20/0x30 [ 715.507110] ? __kasan_slab_free+0x10b/0x140 [ 715.511385] ? slab_free_freelist_hook+0xc7/0x220 [ 715.516092] ? kfree+0xc1/0x520 [ 715.519235] ? ice_deinit_lag+0x16c/0x220 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.527359] ? ice_remove+0x1cf/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.535133] ? pci_device_remove+0xab/0x1d0 [ 715.539318] ? __device_release_driver+0x35b/0x690 [ 715.544110] ? driver_detach+0x214/0x2f0 [ 715.548035] ? bus_remove_driver+0x11d/0x2f0 [ 715.552309] ? pci_unregister_driver+0x26/0x250 [ 715.556840] ? ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.564799] ? __do_sys_delete_module.constprop.0+0x2d8/0x4e0 [ 715.570554] ? do_syscall_64+0x3b/0x90 [ 715.574303] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [ 715.579529] ? start_flush_work+0x542/0x8f0 [ 715.583719] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.591923] ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.599960] ? wait_for_completion_io+0x250/0x250 [ 715.604662] ? lock_acquire+0x196/0x200 [ 715.608504] ? do_raw_spin_trylock+0xa5/0x160 [ 715.612864] ice_sbq_rw_reg+0x1e6/0x2f0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.620813] ? ice_reset+0x130/0x130 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.628497] ? __debug_check_no_obj_freed+0x1e8/0x3c0 [ 715.633550] ? trace_hardirqs_on+0x1c/0x130 [ 715.637748] ice_write_phy_reg_e810+0x70/0xf0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.646220] ? do_raw_spin_trylock+0xa5/0x160 [ 715.650581] ? ice_ptp_release+0x910/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.658797] ? ice_ptp_release+0x255/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.667013] ice_clear_phy_tstamp+0x2c/0x110 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.675403] ice_ptp_release+0x408/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.683440] ice_remove+0x560/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d] [ 715.691037] ? _raw_spin_unlock_irqrestore+0x46/0x73 [ 715.696005] pci_device_remove+0xab/0x1d0 [ 715.700018] __device_release_driver+0x35b/0x690 [ 715.704637] driver_detach+0x214/0x2f0 [ 715.708389] bus_remove_driver+0x11d/0x2f0 [ 715.712489] pci_unregister_driver+0x26/0x250 [ 71 ---truncated--- | 2024-05-22 | not yet calculated | CVE-2021-47449 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix host stage-2 PGD refcount The KVM page-table library refcounts the pages of concatenated stage-2 PGDs individually. However, when running KVM in protected mode, the host's stage-2 PGD is currently managed by EL2 as a single high-order compound page, which can cause the refcount of the tail pages to reach 0 when they shouldn't, hence corrupting the page-table. Fix this by introducing a new hyp_split_page() helper in the EL2 page allocator (matching the kernel's split_page() function), and make use of it from host_s2_zalloc_pages_exact(). | 2024-05-22 | not yet calculated | CVE-2021-47450 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_IDLETIMER: fix panic that occurs when timer_type has garbage value Currently, when the rule related to IDLETIMER is added, idletimer_tg timer structure is initialized by kmalloc on executing idletimer_tg_create function. However, in this process timer->timer_type is not defined to a specific value. Thus, timer->timer_type has garbage value and it occurs kernel panic. So, this commit fixes the panic by initializing timer->timer_type using kzalloc instead of kmalloc. Test commands: # iptables -A OUTPUT -j IDLETIMER --timeout 1 --label test $ cat /sys/class/xt_idletimer/timers/test Killed Splat looks like: BUG: KASAN: user-memory-access in alarm_expires_remaining+0x49/0x70 Read of size 8 at addr 0000002e8c7bc4c8 by task cat/917 CPU: 12 PID: 917 Comm: cat Not tainted 5.14.0+ #3 79940a339f71eb14fc81aee1757a20d5bf13eb0e Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: dump_stack_lvl+0x6e/0x9c kasan_report.cold+0x112/0x117 ? alarm_expires_remaining+0x49/0x70 __asan_load8+0x86/0xb0 alarm_expires_remaining+0x49/0x70 idletimer_tg_show+0xe5/0x19b [xt_IDLETIMER 11219304af9316a21bee5ba9d58f76a6b9bccc6d] dev_attr_show+0x3c/0x60 sysfs_kf_seq_show+0x11d/0x1f0 ? device_remove_bin_file+0x20/0x20 kernfs_seq_show+0xa4/0xb0 seq_read_iter+0x29c/0x750 kernfs_fop_read_iter+0x25a/0x2c0 ? __fsnotify_parent+0x3d1/0x570 ? iov_iter_init+0x70/0x90 new_sync_read+0x2a7/0x3d0 ? __x64_sys_llseek+0x230/0x230 ? rw_verify_area+0x81/0x150 vfs_read+0x17b/0x240 ksys_read+0xd9/0x180 ? vfs_write+0x460/0x460 ? do_syscall_64+0x16/0xc0 ? lockdep_hardirqs_on+0x79/0x120 __x64_sys_read+0x43/0x50 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0cdc819142 Code: c0 e9 c2 fe ff ff 50 48 8d 3d 3a ca 0a 00 e8 f5 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 RSP: 002b:00007fff28eee5b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f0cdc819142 RDX: 0000000000020000 RSI: 00007f0cdc032000 RDI: 0000000000000003 RBP: 00007f0cdc032000 R08: 00007f0cdc031010 R09: 0000000000000000 R10: 0000000000000022 R11: 0000000000000246 R12: 00005607e9ee31f0 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 | 2024-05-22 | not yet calculated | CVE-2021-47451 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: skip netdev events generated on netns removal syzbot reported following (harmless) WARN: WARNING: CPU: 1 PID: 2648 at net/netfilter/core.c:468 nft_netdev_unregister_hooks net/netfilter/nf_tables_api.c:230 [inline] nf_tables_unregister_hook include/net/netfilter/nf_tables.h:1090 [inline] __nft_release_basechain+0x138/0x640 net/netfilter/nf_tables_api.c:9524 nft_netdev_event net/netfilter/nft_chain_filter.c:351 [inline] nf_tables_netdev_event+0x521/0x8a0 net/netfilter/nft_chain_filter.c:382 reproducer: unshare -n bash -c 'ip link add br0 type bridge; nft add table netdev t ; \ nft add chain netdev t ingress \{ type filter hook ingress device "br0" \ priority 0\; policy drop\; \}' Problem is that when netns device exit hooks create the UNREGISTER event, the .pre_exit hook for nf_tables core has already removed the base hook. Notifier attempts to do this again. The need to do base hook unregister unconditionally was needed in the past, because notifier was last stage where reg->dev dereference was safe. Now that nf_tables does the hook removal in .pre_exit, this isn't needed anymore. | 2024-05-22 | not yet calculated | CVE-2021-47452 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ice: Avoid crash from unnecessary IDA free In the remove path, there is an attempt to free the aux_idx IDA whether it was allocated or not. This can potentially cause a crash when unloading the driver on systems that do not initialize support for RDMA. But, this free cannot be gated by the status bit for RDMA, since it is allocated if the driver detects support for RDMA at probe time, but the driver can enter into a state where RDMA is not supported after the IDA has been allocated at probe time and this would lead to a memory leak. Initialize aux_idx to an invalid value and check for a valid value when unloading to determine if an IDA free is necessary. | 2024-05-22 | not yet calculated | CVE-2021-47453 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: powerpc/smp: do not decrement idle task preempt count in CPU offline With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we get: BUG: scheduling while atomic: swapper/1/0/0x00000000 no locks held by swapper/1/0. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100 Call Trace: dump_stack_lvl+0xac/0x108 __schedule_bug+0xac/0xe0 __schedule+0xcf8/0x10d0 schedule_idle+0x3c/0x70 do_idle+0x2d8/0x4a0 cpu_startup_entry+0x38/0x40 start_secondary+0x2ec/0x3a0 start_secondary_prolog+0x10/0x14 This is because powerpc's arch_cpu_idle_dead() decrements the idle task's preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc: Re-enable preemption before cpu_die()"), specifically "start_secondary() expects a preempt_count() of 0." However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled"), that justification no longer holds. The idle task isn't supposed to re-enable preemption, so remove the vestigial preempt_enable() from the CPU offline path. Tested with pseries and powernv in qemu, and pseries on PowerVM. | 2024-05-22 | not yet calculated | CVE-2021-47454 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ptp: Fix possible memory leak in ptp_clock_register() I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release(). | 2024-05-22 | not yet calculated | CVE-2021-47455 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: can: peak_pci: peak_pci_remove(): fix UAF When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 | 2024-05-22 | not yet calculated | CVE-2021-47456 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible() Using wait_event_interruptible() to wait for complete transmission, but do not check the result of wait_event_interruptible() which can be interrupted. It will result in TX buffer has multiple accessors and the later process interferes with the previous process. Following is one of the problems reported by syzbot. ============================================================= WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0 Call Trace: <IRQ> ? isotp_setsockopt+0x390/0x390 __hrtimer_run_queues+0xb8/0x610 hrtimer_run_softirq+0x91/0xd0 ? rcu_read_lock_sched_held+0x4d/0x80 __do_softirq+0xe8/0x553 irq_exit_rcu+0xf8/0x100 sysvec_apic_timer_interrupt+0x9e/0xc0 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 Add result check for wait_event_interruptible() in isotp_sendmsg() to avoid multiple accessers for tx buffer. | 2024-05-22 | not yet calculated | CVE-2021-47457 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ocfs2: mount fails with buffer overflow in strlen Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae | 2024-05-22 | not yet calculated | CVE-2021-47458 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_netdev_start(): fix UAF for rx_kref of j1939_priv It will trigger UAF for rx_kref of j1939_priv as following. cpu0 cpu1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start j1939_priv_set j1939_priv_get_by_ndev_locked j1939_jsk_add ..... j1939_netdev_stop kref_put_lock(&priv->rx_kref, ...) kref_get(&priv->rx_kref, ...) REFCOUNT_WARN("addition on 0;...") ==================================================== refcount_t: addition on 0; use-after-free. WARNING: CPU: 1 PID: 20874 at lib/refcount.c:25 refcount_warn_saturate+0x169/0x1e0 RIP: 0010:refcount_warn_saturate+0x169/0x1e0 Call Trace: j1939_netdev_start+0x68b/0x920 j1939_sk_bind+0x426/0xeb0 ? security_socket_bind+0x83/0xb0 The rx_kref's kref_get() and kref_put() should use j1939_netdev_lock to protect. | 2024-05-22 | not yet calculated | CVE-2021-47459 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix data corruption after conversion from inline format Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb55598, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [akpm@linux-foundation.org: fix whitespace, per Joseph] | 2024-05-22 | not yet calculated | CVE-2021-47460 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix a race between writeprotect and exit_mmap() A race is possible when a process exits, its VMAs are removed by exit_mmap() and at the same time userfaultfd_writeprotect() is called. The race was detected by KASAN on a development kernel, but it appears to be possible on vanilla kernels as well. Use mmget_not_zero() to prevent the race as done in other userfaultfd operations. | 2024-05-22 | not yet calculated | CVE-2021-47461 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind() syzbot reported access to unitialized memory in mbind() [1] Issue came with commit bda420b98505 ("numa balancing: migrate on fault among multiple bound nodes") This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in do_set_mempolicy() This patch moves the check in sanitize_mpol_flags() so that it is also used by mbind() [1] BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_alloc_node mm/slub.c:3221 [inline] slab_alloc mm/slub.c:3230 [inline] kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235 mpol_new mm/mempolicy.c:293 [inline] do_mbind+0x912/0x15f0 mm/mempolicy.c:1289 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae ===================================================== Kernel panic - not syncing: panic_on_kmsan set ... CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106 dump_stack+0x25/0x28 lib/dump_stack.c:113 panic+0x44f/0xdeb kernel/panic.c:232 kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186 __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae | 2024-05-22 | not yet calculated | CVE-2021-47462 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem() Check for a NULL page->mapping before dereferencing the mapping in page_is_secretmem(), as the page's mapping can be nullified while gup() is running, e.g. by reclaim or truncation. BUG: kernel NULL pointer dereference, address: 0000000000000068 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 4173897 Comm: CPU 3/KVM Tainted: G W RIP: 0010:internal_get_user_pages_fast+0x621/0x9d0 Code: <48> 81 7a 68 80 08 04 bc 0f 85 21 ff ff 8 89 c7 be RSP: 0018:ffffaa90087679b0 EFLAGS: 00010046 RAX: ffffe3f37905b900 RBX: 00007f2dd561e000 RCX: ffffe3f37905b934 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffe3f37905b900 ... CR2: 0000000000000068 CR3: 00000004c5898003 CR4: 00000000001726e0 Call Trace: get_user_pages_fast_only+0x13/0x20 hva_to_pfn+0xa9/0x3e0 try_async_pf+0xa1/0x270 direct_page_fault+0x113/0xad0 kvm_mmu_page_fault+0x69/0x680 vmx_handle_exit+0xe1/0x5d0 kvm_arch_vcpu_ioctl_run+0xd81/0x1c70 kvm_vcpu_ioctl+0x267/0x670 __x64_sys_ioctl+0x83/0xa0 do_syscall_64+0x56/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae | 2024-05-22 | not yet calculated | CVE-2021-47463 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: audit: fix possible null-pointer dereference in audit_filter_rules Fix possible null-pointer dereference in audit_filter_rules. audit_filter_rules() error: we previously assumed 'ctx' could be null | 2024-05-22 | not yet calculated | CVE-2021-47464 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest() In commit 10d91611f426 ("powerpc/64s: Reimplement book3s idle code in C") kvm_start_guest() became idle_kvm_start_guest(). The old code allocated a stack frame on the emergency stack, but didn't use the frame to store anything, and also didn't store anything in its caller's frame. idle_kvm_start_guest() on the other hand is written more like a normal C function, it creates a frame on entry, and also stores CR/LR into its callers frame (per the ABI). The problem is that there is no caller frame on the emergency stack. The emergency stack for a given CPU is allocated with: paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE; So emergency_sp actually points to the first address above the emergency stack allocation for a given CPU, we must not store above it without first decrementing it to create a frame. This is different to the regular kernel stack, paca->kstack, which is initialised to point at an initial frame that is ready to use. idle_kvm_start_guest() stores the backchain, CR and LR all of which write outside the allocation for the emergency stack. It then creates a stack frame and saves the non-volatile registers. Unfortunately the frame it creates is not large enough to fit the non-volatiles, and so the saving of the non-volatile registers also writes outside the emergency stack allocation. The end result is that we corrupt whatever is at 0-24 bytes, and 112-248 bytes above the emergency stack allocation. In practice this has gone unnoticed because the memory immediately above the emergency stack happens to be used for other stack allocations, either another CPUs mc_emergency_sp or an IRQ stack. See the order of calls to irqstack_early_init() and emergency_stack_init(). The low addresses of another stack are the top of that stack, and so are only used if that stack is under extreme pressue, which essentially never happens in practice - and if it did there's a high likelyhood we'd crash due to that stack overflowing. Still, we shouldn't be corrupting someone else's stack, and it is purely luck that we aren't corrupting something else. To fix it we save CR/LR into the caller's frame using the existing r1 on entry, we then create a SWITCH_FRAME_SIZE frame (which has space for pt_regs) on the emergency stack with the backchain pointing to the existing stack, and then finally we switch to the new frame on the emergency stack. | 2024-05-22 | not yet calculated | CVE-2021-47465 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm, slub: fix potential memoryleak in kmem_cache_open() In error path, the random_seq of slub cache might be leaked. Fix this by using __kmem_cache_release() to release all the relevant resources. | 2024-05-22 | not yet calculated | CVE-2021-47466 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: kunit: fix reference count leak in kfree_at_end The reference counting issue happens in the normal path of kfree_at_end(). When kunit_alloc_and_get_resource() is invoked, the function forgets to handle the returned resource object, whose refcount increased inside, causing a refcount leak. Fix this issue by calling kunit_alloc_resource() instead of kunit_alloc_and_get_resource(). Fixed the following when applying: Shuah Khan <skhan@linuxfoundation.org> CHECK: Alignment should match open parenthesis + kunit_alloc_resource(test, NULL, kfree_res_free, GFP_KERNEL, (void *)to_free); | 2024-05-22 | not yet calculated | CVE-2021-47467 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: Fix sleeping function called from invalid context The driver can call card->isac.release() function from an atomic context. Fix this by calling this function after releasing the lock. The following log reveals it: [ 44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018 [ 44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe [ 44.169574 ] INFO: lockdep is turned off. [ 44.169899 ] irq event stamp: 0 [ 44.170160 ] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00 [ 44.171240 ] softirqs last enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00 [ 44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 44.172318 ] Preemption disabled at: [ 44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet] [ 44.174441 ] Call Trace: [ 44.174630 ] dump_stack_lvl+0xa8/0xd1 [ 44.174912 ] dump_stack+0x15/0x17 [ 44.175166 ] ___might_sleep+0x3a2/0x510 [ 44.175459 ] ? nj_release+0x69/0x500 [netjet] [ 44.175791 ] __might_sleep+0x82/0xe0 [ 44.176063 ] ? start_flush_work+0x20/0x7b0 [ 44.176375 ] start_flush_work+0x33/0x7b0 [ 44.176672 ] ? trace_irq_enable_rcuidle+0x85/0x170 [ 44.177034 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177372 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177711 ] __flush_work+0x11a/0x1a0 [ 44.177991 ] ? flush_work+0x20/0x20 [ 44.178257 ] ? lock_release+0x13c/0x8f0 [ 44.178550 ] ? __kasan_check_write+0x14/0x20 [ 44.178872 ] ? do_raw_spin_lock+0x148/0x360 [ 44.179187 ] ? read_lock_is_recursive+0x20/0x20 [ 44.179530 ] ? __kasan_check_read+0x11/0x20 [ 44.179846 ] ? do_raw_spin_unlock+0x55/0x900 [ 44.180168 ] ? ____kasan_slab_free+0x116/0x140 [ 44.180505 ] ? _raw_spin_unlock_irqrestore+0x41/0x60 [ 44.180878 ] ? skb_queue_purge+0x1a3/0x1c0 [ 44.181189 ] ? kfree+0x13e/0x290 [ 44.181438 ] flush_work+0x17/0x20 [ 44.181695 ] mISDN_freedchannel+0xe8/0x100 [ 44.182006 ] isac_release+0x210/0x260 [mISDNipac] [ 44.182366 ] nj_release+0xf6/0x500 [netjet] [ 44.182685 ] nj_remove+0x48/0x70 [netjet] [ 44.182989 ] pci_device_remove+0xa9/0x250 | 2024-05-22 | not yet calculated | CVE-2021-47468 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: spi: Fix deadlock when adding SPI controllers on SPI buses Currently we have a global spi_add_lock which we take when adding new devices so that we can check that we're not trying to reuse a chip select that's already controlled. This means that if the SPI device is itself a SPI controller and triggers the instantiation of further SPI devices we trigger a deadlock as we try to register and instantiate those devices while in the process of doing so for the parent controller and hence already holding the global spi_add_lock. Since we only care about concurrency within a single SPI bus move the lock to be per controller, avoiding the deadlock. This can be easily triggered in the case of spi-mux. | 2024-05-22 | not yet calculated | CVE-2021-47469 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm, slub: fix potential use-after-free in slab_debugfs_fops When sysfs_slab_add failed, we shouldn't call debugfs_slab_add() for s because s will be freed soon. And slab_debugfs_fops will use s later leading to a use-after-free. | 2024-05-22 | not yet calculated | CVE-2021-47470 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm: mxsfb: Fix NULL pointer dereference crash on unload The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ. | 2024-05-22 | not yet calculated | CVE-2021-47471 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: mdiobus: Fix memory leak in __mdiobus_register Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it will cause memory leak. BUG: memory leak unreferenced object 0xffff888114032e00 (size 256): comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff ................ 08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff .........ve..... backtrace: [<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline] [<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253 [<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 [<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359 [<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170 [<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 BUG: memory leak unreferenced object 0xffff888116f06900 (size 32): comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s) hex dump (first 32 bytes): 75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00 usb-001:003..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60 [<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83 [<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48 [<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289 [<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147 [<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each ---truncated--- | 2024-05-22 | not yet calculated | CVE-2021-47472 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els() Commit 8c0eb596baa5 ("[SCSI] qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()"), intended to change: bsg_job->request->msgcode == FC_BSG_HST_ELS_NOLOGIN bsg_job->request->msgcode != FC_BSG_RPT_ELS but changed it to: bsg_job->request->msgcode == FC_BSG_RPT_ELS instead. Change the == to a != to avoid leaking the fcport structure or freeing unallocated memory. | 2024-05-22 | not yet calculated | CVE-2021-47473 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix bulk-buffer overflow The driver is using endpoint-sized buffers but must not assume that the tx and rx buffers are of equal size or a malicious device could overflow the slab-allocated receive buffer when doing bulk transfers. | 2024-05-22 | not yet calculated | CVE-2021-47474 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: comedi: vmk80xx: fix transfer-buffer overflows The driver uses endpoint-sized USB transfer buffers but up until recently had no sanity checks on the sizes. Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize of usb endpoints found") inadvertently fixed NULL-pointer dereferences when accessing the transfer buffers in case a malicious device has a zero wMaxPacketSize. Make sure to allocate buffers large enough to handle also the other accesses that are done without a size check (e.g. byte 18 in vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond the buffers, for example, when doing descriptor fuzzing. The original driver was for a low-speed device with 8-byte buffers. Support was later added for a device that uses bulk transfers and is presumably a full-speed device with a maximum 64-byte wMaxPacketSize. | 2024-05-22 | not yet calculated | CVE-2021-47475 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: comedi: ni_usb6501: fix NULL-deref in command paths The driver uses endpoint-sized USB transfer buffers but had no sanity checks on the sizes. This can lead to zero-size-pointer dereferences or overflowed transfer buffers in ni6501_port_command() and ni6501_counter_command() if a (malicious) device has smaller max-packet sizes than expected (or when doing descriptor fuzz testing). Add the missing sanity checks to probe(). | 2024-05-22 | not yet calculated | CVE-2021-47476 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: comedi: dt9812: fix DMA buffers on stack USB transfer buffers are typically mapped for DMA and must not be allocated on the stack or transfers will fail. Allocate proper transfer buffers in the various command helpers and return an error on short transfers instead of acting on random stack data. Note that this also fixes a stack info leak on systems where DMA is not used as 32 bytes are always sent to the device regardless of how short the command is. | 2024-05-22 | not yet calculated | CVE-2021-47477 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: isofs: Fix out of bound access for corrupted isofs image When isofs image is suitably corrupted isofs_read_inode() can read data beyond the end of buffer. Sanity-check the directory entry length before using it. | 2024-05-22 | not yet calculated | CVE-2021-47478 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix use-after-free in rtl8712_dl_fw Syzbot reported use-after-free in rtl8712_dl_fw(). The problem was in race condition between r871xu_dev_remove() ->ndo_open() callback. It's easy to see from crash log, that driver accesses released firmware in ->ndo_open() callback. It may happen, since driver was releasing firmware _before_ unregistering netdev. Fix it by moving unregister_netdev() before cleaning up resources. Call Trace: ... rtl871x_open_fw drivers/staging/rtl8712/hal_init.c:83 [inline] rtl8712_dl_fw+0xd95/0xe10 drivers/staging/rtl8712/hal_init.c:170 rtl8712_hal_init drivers/staging/rtl8712/hal_init.c:330 [inline] rtl871x_hal_init+0xae/0x180 drivers/staging/rtl8712/hal_init.c:394 netdev_open+0xe6/0x6c0 drivers/staging/rtl8712/os_intfs.c:380 __dev_open+0x2bc/0x4d0 net/core/dev.c:1484 Freed by task 1306: ... release_firmware+0x1b/0x30 drivers/base/firmware_loader/main.c:1053 r871xu_dev_remove+0xcc/0x2c0 drivers/staging/rtl8712/usb_intf.c:599 usb_unbind_interface+0x1d8/0x8d0 drivers/usb/core/driver.c:458 | 2024-05-22 | not yet calculated | CVE-2021-47479 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Put LLD module refcnt after SCSI device is released SCSI host release is triggered when SCSI device is freed. We have to make sure that the low-level device driver module won't be unloaded before SCSI host instance is released because shost->hostt is required in the release handler. Make sure to put LLD module refcnt after SCSI device is released. Fixes a kernel panic of 'BUG: unable to handle page fault for address' reported by Changhui and Yi. | 2024-05-22 | not yet calculated | CVE-2021-47480 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Initialize the ODP xarray when creating an ODP MR Normally the zero fill would hide the missing initialization, but an errant set to desc_size in reg_create() causes a crash: BUG: unable to handle page fault for address: 0000000800000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 5 PID: 890 Comm: ib_write_bw Not tainted 5.15.0-rc4+ #47 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5_ib_dereg_mr+0x14/0x3b0 [mlx5_ib] Code: 48 63 cd 4c 89 f7 48 89 0c 24 e8 37 30 03 e1 48 8b 0c 24 eb a0 90 0f 1f 44 00 00 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 30 <48> 8b 2f 65 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 8b 87 c8 RSP: 0018:ffff88811afa3a60 EFLAGS: 00010286 RAX: 000000000000001c RBX: 0000000800000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000800000000 RBP: 0000000800000000 R08: 0000000000000000 R09: c0000000fffff7ff R10: ffff88811afa38f8 R11: ffff88811afa38f0 R12: ffffffffa02c7ac0 R13: 0000000000000000 R14: ffff88811afa3cd8 R15: ffff88810772fa00 FS: 00007f47b9080740(0000) GS:ffff88852cd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000800000000 CR3: 000000010761e003 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5_ib_free_odp_mr+0x95/0xc0 [mlx5_ib] mlx5_ib_dereg_mr+0x128/0x3b0 [mlx5_ib] ib_dereg_mr_user+0x45/0xb0 [ib_core] ? xas_load+0x8/0x80 destroy_hw_idr_uobject+0x1a/0x50 [ib_uverbs] uverbs_destroy_uobject+0x2f/0x150 [ib_uverbs] uobj_destroy+0x3c/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x467/0xb00 [ib_uverbs] ? uverbs_finalize_object+0x60/0x60 [ib_uverbs] ? ttwu_queue_wakelist+0xa9/0xe0 ? pty_write+0x85/0x90 ? file_tty_write.isra.33+0x214/0x330 ? process_echoes+0x60/0x60 ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs] __x64_sys_ioctl+0x10d/0x8e0 ? vfs_write+0x17f/0x260 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Add the missing xarray initialization and remove the desc_size set. | 2024-05-22 | not yet calculated | CVE-2021-47481 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: batman-adv: fix error handling Syzbot reported ODEBUG warning in batadv_nc_mesh_free(). The problem was in wrong error handling in batadv_mesh_init(). Before this patch batadv_mesh_init() was calling batadv_mesh_free() in case of any batadv_*_init() calls failure. This approach may work well, when there is some kind of indicator, which can tell which parts of batadv are initialized; but there isn't any. All written above lead to cleaning up uninitialized fields. Even if we hide ODEBUG warning by initializing bat_priv->nc.work, syzbot was able to hit GPF in batadv_nc_purge_paths(), because hash pointer in still NULL. [1] To fix these bugs we can unwind batadv_*_init() calls one by one. It is good approach for 2 reasons: 1) It fixes bugs on error handling path 2) It improves the performance, since we won't call unneeded batadv_*_free() functions. So, this patch makes all batadv_*_init() clean up all allocated memory before returning with an error to no call correspoing batadv_*_free() and open-codes batadv_mesh_free() with proper order to avoid touching uninitialized fields. | 2024-05-22 | not yet calculated | CVE-2021-47482 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: regmap: Fix possible double-free in regcache_rbtree_exit() In regcache_rbtree_insert_to_block(), when 'present' realloc failed, the 'blk' which is supposed to assign to 'rbnode->block' will be freed, so 'rbnode->block' points a freed memory, in the error handling path of regcache_rbtree_init(), 'rbnode->block' will be freed again in regcache_rbtree_exit(), KASAN will report double-free as follows: BUG: KASAN: double-free or invalid-free in kfree+0xce/0x390 Call Trace: slab_free_freelist_hook+0x10d/0x240 kfree+0xce/0x390 regcache_rbtree_exit+0x15d/0x1a0 regcache_rbtree_init+0x224/0x2c0 regcache_init+0x88d/0x1310 __regmap_init+0x3151/0x4a80 __devm_regmap_init+0x7d/0x100 madera_spi_probe+0x10f/0x333 [madera_spi] spi_probe+0x183/0x210 really_probe+0x285/0xc30 To fix this, moving up the assignment of rbnode->block to immediately after the reallocation has succeeded so that the data structure stays valid even if the second reallocation fails. | 2024-05-22 | not yet calculated | CVE-2021-47483 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix possible null pointer dereference. This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c" | 2024-05-22 | not yet calculated | CVE-2021-47484 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: IB/qib: Protect from buffer overflow in struct qib_user_sdma_pkt fields Overflowing either addrlimit or bytes_togo can allow userspace to trigger a buffer overflow of kernel memory. Check for overflows in all the places doing math on user controlled buffers. | 2024-05-22 | not yet calculated | CVE-2021-47485 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix potential NULL dereference The bpf_jit_binary_free() function requires a non-NULL argument. When the RISC-V BPF JIT fails to converge in NR_JIT_ITERATIONS steps, jit_data->header will be NULL, which triggers a NULL dereference. Avoid this by checking the argument, prior calling the function. | 2024-05-22 | not yet calculated | CVE-2021-47486 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix out of bounds write Size can be any value and is user controlled resulting in overwriting the 40 byte array wr_buf with an arbitrary length of data from buf. | 2024-05-22 | not yet calculated | CVE-2021-47487 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cgroup: Fix memory leak caused by missing cgroup_bpf_offline When enabling CONFIG_CGROUP_BPF, kmemleak can be observed by running the command as below: $mount -t cgroup -o none,name=foo cgroup cgroup/ $umount cgroup/ unreferenced object 0xc3585c40 (size 64): comm "mount", pid 425, jiffies 4294959825 (age 31.990s) hex dump (first 32 bytes): 01 00 00 80 84 8c 28 c0 00 00 00 00 00 00 00 00 ......(......... 00 00 00 00 00 00 00 00 6c 43 a0 c3 00 00 00 00 ........lC...... backtrace: [<e95a2f9e>] cgroup_bpf_inherit+0x44/0x24c [<1f03679c>] cgroup_setup_root+0x174/0x37c [<ed4b0ac5>] cgroup1_get_tree+0x2c0/0x4a0 [<f85b12fd>] vfs_get_tree+0x24/0x108 [<f55aec5c>] path_mount+0x384/0x988 [<e2d5e9cd>] do_mount+0x64/0x9c [<208c9cfe>] sys_mount+0xfc/0x1f4 [<06dd06e0>] ret_fast_syscall+0x0/0x48 [<a8308cb3>] 0xbeb4daa8 This is because that since the commit 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") root_cgrp->bpf.refcnt.data is allocated by the function percpu_ref_init in cgroup_bpf_inherit which is called by cgroup_setup_root when mounting, but not freed along with root_cgrp when umounting. Adding cgroup_bpf_offline which calls percpu_ref_kill to cgroup_kill_sb can free root_cgrp->bpf.refcnt.data in umount path. This patch also fixes the commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself"). A cgroup_bpf_offline is needed to do a cleanup that frees the resources which are allocated by cgroup_bpf_inherit in cgroup_setup_root. And inside cgroup_bpf_offline, cgroup_get() is at the beginning and cgroup_put is at the end of cgroup_bpf_release which is called by cgroup_bpf_offline. So cgroup_bpf_offline can keep the balance of cgroup's refcount. | 2024-05-22 | not yet calculated | CVE-2021-47488 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix even more out of bound writes from debugfs CVE-2021-42327 was fixed by: commit f23750b5b3d98653b31d4469592935ef6364ad67 Author: Thelford Williams <tdwilliamsiv@gmail.com> Date: Wed Oct 13 16:04:13 2021 -0400 drm/amdgpu: fix out of bounds write but amdgpu_dm_debugfs.c contains more of the same issue so fix the remaining ones. v2: * Add missing fix in dp_max_bpc_write (Harry Wentland) | 2024-05-22 | not yet calculated | CVE-2021-47489 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/ttm: fix memleak in ttm_transfered_destroy We need to cleanup the fences for ghost objects as well. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214029 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214447 | 2024-05-22 | not yet calculated | CVE-2021-47490 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm: khugepaged: skip huge page collapse for special files The read-only THP for filesystems will collapse THP for files opened readonly and mapped with VM_EXEC. The intended usecase is to avoid TLB misses for large text segments. But it doesn't restrict the file types so a THP could be collapsed for a non-regular file, for example, block device, if it is opened readonly and mapped with EXEC permission. This may cause bugs, like [1] and [2]. This is definitely not the intended usecase, so just collapse THP for regular files in order to close the attack surface. [shy828301@gmail.com: fix vm_file check [3]] | 2024-05-22 | not yet calculated | CVE-2021-47491 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm, thp: bail out early in collapse_file for writeback page Currently collapse_file does not explicitly check PG_writeback, instead, page_has_private and try_to_release_page are used to filter writeback pages. This does not work for xfs with blocksize equal to or larger than pagesize, because in such case xfs has no page->private. This makes collapse_file bail out early for writeback page. Otherwise, xfs end_page_writeback will panic as follows. page:fffffe00201bcc80 refcount:0 mapcount:0 mapping:ffff0003f88c86a8 index:0x0 pfn:0x84ef32 aops:xfs_address_space_operations [xfs] ino:30000b7 dentry name:"libtest.so" flags: 0x57fffe0000008027(locked|referenced|uptodate|active|writeback) raw: 57fffe0000008027 ffff80001b48bc28 ffff80001b48bc28 ffff0003f88c86a8 raw: 0000000000000000 0000000000000000 00000000ffffffff ffff0000c3e9a000 page dumped because: VM_BUG_ON_PAGE(((unsigned int) page_ref_count(page) + 127u <= 127u)) page->mem_cgroup:ffff0000c3e9a000 ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:1212! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: BUG: Bad page state in process khugepaged pfn:84ef32 xfs(E) page:fffffe00201bcc80 refcount:0 mapcount:0 mapping:0 index:0x0 pfn:0x84ef32 libcrc32c(E) rfkill(E) aes_ce_blk(E) crypto_simd(E) ... CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Tainted: ... pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) Call trace: end_page_writeback+0x1c0/0x214 iomap_finish_page_writeback+0x13c/0x204 iomap_finish_ioend+0xe8/0x19c iomap_writepage_end_bio+0x38/0x50 bio_endio+0x168/0x1ec blk_update_request+0x278/0x3f0 blk_mq_end_request+0x34/0x15c virtblk_request_done+0x38/0x74 [virtio_blk] blk_done_softirq+0xc4/0x110 __do_softirq+0x128/0x38c __irq_exit_rcu+0x118/0x150 irq_exit+0x1c/0x30 __handle_domain_irq+0x8c/0xf0 gic_handle_irq+0x84/0x108 el1_irq+0xcc/0x180 arch_cpu_idle+0x18/0x40 default_idle_call+0x4c/0x1a0 cpuidle_idle_call+0x168/0x1e0 do_idle+0xb4/0x104 cpu_startup_entry+0x30/0x9c secondary_start_kernel+0x104/0x180 Code: d4210000 b0006161 910c8021 94013f4d (d4210000) ---[ end trace 4a88c6a074082f8c ]--- Kernel panic - not syncing: Oops - BUG: Fatal exception in interrupt | 2024-05-22 | not yet calculated | CVE-2021-47492 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix race between searching chunks and release journal_head from buffer_head Encountered a race between ocfs2_test_bg_bit_allocatable() and jbd2_journal_put_journal_head() resulting in the below vmcore. PID: 106879 TASK: ffff880244ba9c00 CPU: 2 COMMAND: "loop3" Call trace: panic oops_end no_context __bad_area_nosemaphore bad_area_nosemaphore __do_page_fault do_page_fault page_fault [exception RIP: ocfs2_block_group_find_clear_bits+316] ocfs2_block_group_find_clear_bits [ocfs2] ocfs2_cluster_group_search [ocfs2] ocfs2_search_chain [ocfs2] ocfs2_claim_suballoc_bits [ocfs2] __ocfs2_claim_clusters [ocfs2] ocfs2_claim_clusters [ocfs2] ocfs2_local_alloc_slide_window [ocfs2] ocfs2_reserve_local_alloc_bits [ocfs2] ocfs2_reserve_clusters_with_limit [ocfs2] ocfs2_reserve_clusters [ocfs2] ocfs2_lock_refcount_allocators [ocfs2] ocfs2_make_clusters_writable [ocfs2] ocfs2_replace_cow [ocfs2] ocfs2_refcount_cow [ocfs2] ocfs2_file_write_iter [ocfs2] lo_rw_aio loop_queue_work kthread_worker_fn kthread ret_from_fork When ocfs2_test_bg_bit_allocatable() called bh2jh(bg_bh), the bg_bh->b_private NULL as jbd2_journal_put_journal_head() raced and released the jounal head from the buffer head. Needed to take bit lock for the bit 'BH_JournalHead' to fix this race. | 2024-05-22 | not yet calculated | CVE-2021-47493 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cfg80211: fix management registrations locking The management registrations locking was broken, the list was locked for each wdev, but cfg80211_mgmt_registrations_update() iterated it without holding all the correct spinlocks, causing list corruption. Rather than trying to fix it with fine-grained locking, just move the lock to the wiphy/rdev (still need the list on each wdev), we already need to hold the wdev lock to change it, so there's no contention on the lock in any case. This trivially fixes the bug since we hold one wdev's lock already, and now will hold the lock that protects all lists. | 2024-05-22 | not yet calculated | CVE-2021-47494 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usbnet: sanity check for maxpacket maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues | 2024-05-22 | not yet calculated | CVE-2021-47495 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/tls: Fix flipped sign in tls_err_abort() calls sk->sk_err appears to expect a positive value, a convention that ktls doesn't always follow and that leads to memory corruption in other code. For instance, [kworker] tls_encrypt_done(..., err=<negative error from crypto request>) tls_err_abort(.., err) sk->sk_err = err; [task] splice_from_pipe_feed ... tls_sw_do_sendpage if (sk->sk_err) { ret = -sk->sk_err; // ret is positive splice_from_pipe_feed (continued) ret = actor(...) // ret is still positive and interpreted as bytes // written, resulting in underflow of buf->len and // sd->len, leading to huge buf->offset and bogus // addresses computed in later calls to actor() Fix all tls_err_abort() callers to pass a negative error code consistently and centralize the error-prone sign flip there, throwing in a warning to catch future misuse and uninlining the function so it really does only warn once. | 2024-05-22 | not yet calculated | CVE-2021-47496 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nvmem: Fix shift-out-of-bound (UBSAN) with byte size cells If a cell has 'nbits' equal to a multiple of BITS_PER_BYTE the logic *p &= GENMASK((cell->nbits%BITS_PER_BYTE) - 1, 0); will become undefined behavior because nbits modulo BITS_PER_BYTE is 0, and we subtract one from that making a large number that is then shifted more than the number of bits that fit into an unsigned long. UBSAN reports this problem: UBSAN: shift-out-of-bounds in drivers/nvmem/core.c:1386:8 shift exponent 64 is too large for 64-bit type 'unsigned long' CPU: 6 PID: 7 Comm: kworker/u16:0 Not tainted 5.15.0-rc3+ #9 Hardware name: Google Lazor (rev3+) with KB Backlight (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x170 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 ubsan_epilogue+0x10/0x54 __ubsan_handle_shift_out_of_bounds+0x180/0x194 __nvmem_cell_read+0x1ec/0x21c nvmem_cell_read+0x58/0x94 nvmem_cell_read_variable_common+0x4c/0xb0 nvmem_cell_read_variable_le_u32+0x40/0x100 a6xx_gpu_init+0x170/0x2f4 adreno_bind+0x174/0x284 component_bind_all+0xf0/0x264 msm_drm_bind+0x1d8/0x7a0 try_to_bring_up_master+0x164/0x1ac __component_add+0xbc/0x13c component_add+0x20/0x2c dp_display_probe+0x340/0x384 platform_probe+0xc0/0x100 really_probe+0x110/0x304 __driver_probe_device+0xb8/0x120 driver_probe_device+0x4c/0xfc __device_attach_driver+0xb0/0x128 bus_for_each_drv+0x90/0xdc __device_attach+0xc8/0x174 device_initial_probe+0x20/0x2c bus_probe_device+0x40/0xa4 deferred_probe_work_func+0x7c/0xb8 process_one_work+0x128/0x21c process_scheduled_works+0x40/0x54 worker_thread+0x1ec/0x2a8 kthread+0x138/0x158 ret_from_fork+0x10/0x20 Fix it by making sure there are any bits to mask out. | 2024-05-22 | not yet calculated | CVE-2021-47497 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: dm rq: don't queue request to blk-mq during DM suspend DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue. But blk-mq's unquiesce may come from outside events, such as elevator switch, updating nr_requests or others, and request may come during suspend, so simply ask for blk-mq to requeue it. Fixes one kernel panic issue when running updating nr_requests and dm-mpath suspend/resume stress test. | 2024-05-22 | not yet calculated | CVE-2021-47498 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxcjk-1013: Fix possible memory leak in probe and remove When ACPI type is ACPI_SMO8500, the data->dready_trig will not be set, the memory allocated by iio_triggered_buffer_setup() will not be freed, and cause memory leak as follows: unreferenced object 0xffff888009551400 (size 512): comm "i2c-SMO8500-125", pid 911, jiffies 4294911787 (age 83.852s) hex dump (first 32 bytes): 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 20 e2 e5 c0 ff ff ff ff ........ ....... backtrace: [<0000000041ce75ee>] kmem_cache_alloc_trace+0x16d/0x360 [<000000000aeb17b0>] iio_kfifo_allocate+0x41/0x130 [kfifo_buf] [<000000004b40c1f5>] iio_triggered_buffer_setup_ext+0x2c/0x210 [industrialio_triggered_buffer] [<000000004375b15f>] kxcjk1013_probe+0x10c3/0x1d81 [kxcjk_1013] Fix it by remove data->dready_trig condition in probe and remove. | 2024-05-24 | not yet calculated | CVE-2021-47499 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: iio: mma8452: Fix trigger reference couting The mma8452 driver directly assigns a trigger to the struct iio_dev. The IIO core when done using this trigger will call `iio_trigger_put()` to drop the reference count by 1. Without the matching `iio_trigger_get()` in the driver the reference count can reach 0 too early, the trigger gets freed while still in use and a use-after-free occurs. Fix this by getting a reference to the trigger before assigning it to the IIO device. | 2024-05-24 | not yet calculated | CVE-2021-47500 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL pointer dereference in i40e_dbg_dump_desc When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors. | 2024-05-24 | not yet calculated | CVE-2021-47501 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd934x: handle channel mappping list correctly Currently each channel is added as list to dai channel list, however there is danger of adding same channel to multiple dai channel list which endups corrupting the other list where its already added. This patch ensures that the channel is actually free before adding to the dai channel list and also ensures that the channel is on the list before deleting it. This check was missing previously, and we did not hit this issue as we were testing very simple usecases with sequence of amixer commands. | 2024-05-24 | not yet calculated | CVE-2021-47502 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc() Calling scsi_remove_host() before scsi_add_host() results in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000108 RIP: 0010:device_del+0x63/0x440 Call Trace: device_unregister+0x17/0x60 scsi_remove_host+0xee/0x2a0 pm8001_pci_probe+0x6ef/0x1b90 [pm80xx] local_pci_probe+0x3f/0x90 We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host() has not been called yet at that point in time. Function call tree: pm8001_pci_probe() | `- pm8001_pci_alloc() | | | `- pm8001_alloc() | | | `- scsi_remove_host() | `- scsi_add_host() | 2024-05-24 | not yet calculated | CVE-2021-47503 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure task_work gets run as part of cancelations If we successfully cancel a work item but that work item needs to be processed through task_work, then we can be sleeping uninterruptibly in io_uring_cancel_generic() and never process it. Hence we don't make forward progress and we end up with an uninterruptible sleep warning. While in there, correct a comment that should be IFF, not IIF. | 2024-05-24 | not yet calculated | CVE-2021-47504 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: aio: fix use-after-free due to missing POLLFREE handling signalfd_poll() and binder_poll() are special in that they use a waitqueue whose lifetime is the current task, rather than the struct file as is normally the case. This is okay for blocking polls, since a blocking poll occurs within one task; however, non-blocking polls require another solution. This solution is for the queue to be cleared before it is freed, by sending a POLLFREE notification to all waiters. Unfortunately, only eventpoll handles POLLFREE. A second type of non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't handle POLLFREE. This allows a use-after-free to occur if a signalfd or binder fd is polled with aio poll, and the waitqueue gets freed. Fix this by making aio poll handle POLLFREE. A patch by Ramji Jiyani <ramjiyani@google.com> (https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com) tried to do this by making aio_poll_wake() always complete the request inline if POLLFREE is seen. However, that solution had two bugs. First, it introduced a deadlock, as it unconditionally locked the aio context while holding the waitqueue lock, which inverts the normal locking order. Second, it didn't consider that POLLFREE notifications are missed while the request has been temporarily de-queued. The second problem was solved by my previous patch. This patch then properly fixes the use-after-free by handling POLLFREE in a deadlock-free way. It does this by taking advantage of the fact that freeing of the waitqueue is RCU-delayed, similar to what eventpoll does. | 2024-05-24 | not yet calculated | CVE-2021-47505 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nfsd: fix use-after-free due to delegation race A delegation break could arrive as soon as we've called vfs_setlease. A delegation break runs a callback which immediately (in nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we then exit nfs4_set_delegation without hashing the delegation, it will be freed as soon as the callback is done with it, without ever being removed from del_recall_lru. Symptoms show up later as use-after-free or list corruption warnings, usually in the laundromat thread. I suspect aba2072f4523 "nfsd: grant read delegations to clients holding writes" made this bug easier to hit, but I looked as far back as v3.0 and it looks to me it already had the same problem. So I'm not sure where the bug was introduced; it may have been there from the beginning. | 2024-05-24 | not yet calculated | CVE-2021-47506 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix nsfd startup race (again) Commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first") has re-opened rpc_pipefs_event() race against nfsd_net_id registration (register_pernet_subsys()) which has been fixed by commit bb7ffbf29e76 ("nfsd: fix nsfd startup race triggering BUG_ON"). Restore the order of register_pernet_subsys() vs register_cld_notifier(). Add WARN_ON() to prevent a future regression. Crash info: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000012 CPU: 8 PID: 345 Comm: mount Not tainted 5.4.144-... #1 pc : rpc_pipefs_event+0x54/0x120 [nfsd] lr : rpc_pipefs_event+0x48/0x120 [nfsd] Call trace: rpc_pipefs_event+0x54/0x120 [nfsd] blocking_notifier_call_chain rpc_fill_super get_tree_keyed rpc_fs_get_tree vfs_get_tree do_mount ksys_mount __arm64_sys_mount el0_svc_handler el0_svc | 2024-05-24 | not yet calculated | CVE-2021-47507 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: btrfs: free exchange changeset on failures Fstests runs on my VMs have show several kmemleak reports like the following. unreferenced object 0xffff88811ae59080 (size 64): comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s) hex dump (first 32 bytes): 00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00 ................ 90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff ................ backtrace: [<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs] [<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs] [<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs] [<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs] [<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs] [<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs] [<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs] [<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs] [<00000000fb8a74b8>] iomap_iter+0x161/0x1e0 [<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700 [<000000002567ba53>] iomap_dio_rw+0x5/0x20 [<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs] [<000000005eb3d845>] new_sync_write+0x106/0x180 [<000000003fb505bf>] vfs_write+0x24d/0x2f0 [<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0 [<000000003eba3fdf>] do_syscall_64+0x43/0x90 In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata() fail the allocated extent_changeset will not be freed. So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space() free the allocated extent_changeset to get rid of the allocated memory. The issue currently only happens in the direct IO write path, but only after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range"), and also at defrag_one_locked_target(). Every other place is always calling extent_changeset_free() even if its call to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has failed. | 2024-05-24 | not yet calculated | CVE-2021-47508 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Limit the period size to 16MB Set the practical limit to the period size (the fragment shift in OSS) instead of a full 31bit; a too large value could lead to the exhaust of memory as we allocate temporary buffers of the period size, too. As of this patch, we set to 16MB limit, which should cover all use cases. | 2024-05-24 | not yet calculated | CVE-2021-47509 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix re-dirty process of tree-log nodes There is a report of a transaction abort of -EAGAIN with the following script. #!/bin/sh for d in sda sdb; do mkfs.btrfs -d single -m single -f /dev/\${d} done mount /dev/sda /mnt/test mount /dev/sdb /mnt/scratch for dir in test scratch; do echo 3 >/proc/sys/vm/drop_caches fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \ --numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \ --group_reporting |& tee /dev/shm/fio.\${dir} echo 3 >/proc/sys/vm/drop_caches done for d in sda sdb; do umount /dev/\${d} done The stack trace is shown in below. [3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction) [3310.968060] BTRFS info (device sda): forced readonly [3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction. [3310.968065] ------------[ cut here ]------------ [3310.968066] BTRFS: Transaction aborted (error -11) [3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1 [3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021 [3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8 [3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282 [3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027 [3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00 [3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48 [3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00 [3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58 [3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000 [3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0 [3310.968160] PKRU: 55555554 [3310.968161] Call Trace: [3310.968167] ? dput+0xd4/0x300 [3310.968174] btrfs_sync_file+0x3f1/0x490 [3310.968180] __x64_sys_fsync+0x33/0x60 [3310.968185] do_syscall_64+0x3b/0x90 [3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae [3310.968194] RIP: 0033:0x7efe6557329b [3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a [3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b [3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006 [3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010 [3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980 [3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000 [3310.968212] ---[ end trace 1a346f4d3c0d96ba ]--- [3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown The abort occurs because of a write hole while writing out freeing tree nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree node to ensure btrfs can write the region and does not leave a hole on write on a zoned device. The current code fails to re-dirty a node when the tree-log tree's depth is greater or equal to 2. That leads to a transaction abort with -EAGAIN. Fix the issue by properly re-dirtying a node on walking up the tree. | 2024-05-24 | not yet calculated | CVE-2021-47510 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: oss: Fix negative period/buffer sizes The period size calculation in OSS layer may receive a negative value as an error, but the code there assumes only the positive values and handle them with size_t. Due to that, a too big value may be passed to the lower layers. This patch changes the code to handle with ssize_t and adds the proper error checks appropriately. | 2024-05-24 | not yet calculated | CVE-2021-47511 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/sched: fq_pie: prevent dismantle issue For some reason, fq_pie_destroy() did not copy working code from pie_destroy() and other qdiscs, thus causing elusive bug. Before calling del_timer_sync(&q->adapt_timer), we need to ensure timer will not rearm itself. rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-....: (4416 ticks this GP) idle=60d/1/0x4000000000000000 softirq=10433/10434 fqs=2579 (t=10501 jiffies g=13085 q=3989) NMI backtrace for cpu 0 CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 5.16.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111 nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343 print_cpu_stall kernel/rcu/tree_stall.h:627 [inline] check_cpu_stall kernel/rcu/tree_stall.h:711 [inline] rcu_pending kernel/rcu/tree.c:3878 [inline] rcu_sched_clock_irq.cold+0x9d/0x746 kernel/rcu/tree.c:2597 update_process_times+0x16d/0x200 kernel/time/timer.c:1785 tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226 tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428 __run_hrtimer kernel/time/hrtimer.c:1685 [inline] __hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749 hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline] __sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103 sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 RIP: 0010:write_comp_data kernel/kcov.c:221 [inline] RIP: 0010:__sanitizer_cov_trace_const_cmp1+0x1d/0x80 kernel/kcov.c:273 Code: 54 c8 20 48 89 10 c3 66 0f 1f 44 00 00 53 41 89 fb 41 89 f1 bf 03 00 00 00 65 48 8b 0c 25 40 70 02 00 48 89 ce 4c 8b 54 24 08 <e8> 4e f7 ff ff 84 c0 74 51 48 8b 81 88 15 00 00 44 8b 81 84 15 00 RSP: 0018:ffffc90000d27b28 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888064bf1bf0 RCX: ffff888011928000 RDX: ffff888011928000 RSI: ffff888011928000 RDI: 0000000000000003 RBP: ffff888064bf1c28 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff875d8295 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8880783dd300 R14: 0000000000000000 R15: 0000000000000000 pie_calculate_probability+0x405/0x7c0 net/sched/sch_pie.c:418 fq_pie_timer+0x170/0x2a0 net/sched/sch_fq_pie.c:383 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421 expire_timers kernel/time/timer.c:1466 [inline] __run_timers.part.0+0x675/0xa20 kernel/time/timer.c:1734 __run_timers kernel/time/timer.c:1715 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1747 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 run_ksoftirqd kernel/softirq.c:921 [inline] run_ksoftirqd+0x2d/0x60 kernel/softirq.c:913 smpboot_thread_fn+0x645/0x9c0 kernel/smpboot.c:164 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> | 2024-05-24 | not yet calculated | CVE-2021-47512 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: Fix memory leak in felix_setup_mmio_filtering Avoid a memory leak if there is not a CPU port defined. Addresses-Coverity-ID: 1492897 ("Resource leak") Addresses-Coverity-ID: 1492899 ("Resource leak") | 2024-05-24 | not yet calculated | CVE-2021-47513 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: devlink: fix netns refcount leak in devlink_nl_cmd_reload() While preparing my patch series adding netns refcount tracking, I spotted bugs in devlink_nl_cmd_reload() Some error paths forgot to release a refcount on a netns. To fix this, we can reduce the scope of get_net()/put_net() section around the call to devlink_reload(). | 2024-05-24 | not yet calculated | CVE-2021-47514 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: seg6: fix the iif in the IPv6 socket control block When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving interface index into the IPv4 socket control block (v5.16-rc4, net/ipv4/ip_input.c line 510): IPCB(skb)->iif = skb->skb_iif; If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH header, the seg6_do_srh_encap(...) performs the required encapsulation. In this case, the seg6_do_srh_encap function clears the IPv6 socket control block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163): memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); The memset(...) was introduced in commit ef489749aae5 ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29). Since the IPv6 socket control block and the IPv4 socket control block share the same memory area (skb->cb), the receiving interface index info is lost (IP6CB(skb)->iif is set to zero). As a side effect, that condition triggers a NULL pointer dereference if commit 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") is applied. To fix that issue, we set the IP6CB(skb)->iif with the index of the receiving interface once again. | 2024-05-24 | not yet calculated | CVE-2021-47515 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nfp: Fix memory leak in nfp_cpp_area_cache_add() In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a CPP area structure. But in line 807 (#2), when the cache is allocated failed, this CPP area structure is not freed, which will result in memory leak. We can fix it by freeing the CPP area when the cache is allocated failed (#2). 792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size) 793 { 794 struct nfp_cpp_area_cache *cache; 795 struct nfp_cpp_area *area; 800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0), 801 0, size); // #1: allocates and initializes 802 if (!area) 803 return -ENOMEM; 805 cache = kzalloc(sizeof(*cache), GFP_KERNEL); 806 if (!cache) 807 return -ENOMEM; // #2: missing free 817 return 0; 818 } | 2024-05-24 | not yet calculated | CVE-2021-47516 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ethtool: do not perform operations on net devices being unregistered There is a short period between a net device starts to be unregistered and when it is actually gone. In that time frame ethtool operations could still be performed, which might end up in unwanted or undefined behaviours[1]. Do not allow ethtool operations after a net device starts its unregistration. This patch targets the netlink part as the ioctl one isn't affected: the reference to the net device is taken and the operation is executed within an rtnl lock section and the net device won't be found after unregister. [1] For example adding Tx queues after unregister ends up in NULL pointer exceptions and UaFs, such as: BUG: KASAN: use-after-free in kobject_get+0x14/0x90 Read of size 1 at addr ffff88801961248c by task ethtool/755 CPU: 0 PID: 755 Comm: ethtool Not tainted 5.15.0-rc6+ #778 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/014 Call Trace: dump_stack_lvl+0x57/0x72 print_address_description.constprop.0+0x1f/0x140 kasan_report.cold+0x7f/0x11b kobject_get+0x14/0x90 kobject_add_internal+0x3d1/0x450 kobject_init_and_add+0xba/0xf0 netdev_queue_update_kobjects+0xcf/0x200 netif_set_real_num_tx_queues+0xb4/0x310 veth_set_channels+0x1c3/0x550 ethnl_set_channels+0x524/0x610 | 2024-05-24 | not yet calculated | CVE-2021-47517 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nfc: fix potential NULL pointer deref in nfc_genl_dump_ses_done The done() netlink callback nfc_genl_dump_ses_done() should check if received argument is non-NULL, because its allocation could fail earlier in dumpit() (nfc_genl_dump_ses()). | 2024-05-24 | not yet calculated | CVE-2021-47518 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_read_fifo: fix memory leak in error branch In m_can_read_fifo(), if the second call to m_can_fifo_read() fails, the function jump to the out_fail label and returns without calling m_can_receive_skb(). This means that the skb previously allocated by alloc_can_skb() is not freed. In other terms, this is a memory leak. This patch adds a goto label to destroy the skb if an error occurs. Issue was found with GCC -fanalyzer, please follow the link below for details. | 2024-05-24 | not yet calculated | CVE-2021-47519 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: can: pch_can: pch_can_rx_normal: fix use after free After calling netif_receive_skb(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is dereferenced just after the call netif_receive_skb(skb). Reordering the lines solves the issue. | 2024-05-24 | not yet calculated | CVE-2021-47520 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: can: sja1000: fix use after free in ems_pcmcia_add_card() If the last channel is not available then "dev" is freed. Fortunately, we can just use "pdev->irq" instead. Also we should check if at least one channel was set up. | 2024-05-24 | not yet calculated | CVE-2021-47521 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: HID: bigbenff: prevent null pointer dereference When emulating the device through uhid, there is a chance we don't have output reports and so report_field is null. | 2024-05-24 | not yet calculated | CVE-2021-47522 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix leak of rcvhdrtail_dummy_kvaddr This buffer is currently allocated in hfi1_init(): if (reinit) ret = init_after_reset(dd); else ret = loadtime_init(dd); if (ret) goto done; /* allocate dummy tail memory for all receive contexts */ dd->rcvhdrtail_dummy_kvaddr = dma_alloc_coherent(&dd->pcidev->dev, sizeof(u64), &dd->rcvhdrtail_dummy_dma, GFP_KERNEL); if (!dd->rcvhdrtail_dummy_kvaddr) { dd_dev_err(dd, "cannot allocate dummy tail memory\n"); ret = -ENOMEM; goto done; } The reinit triggered path will overwrite the old allocation and leak it. Fix by moving the allocation to hfi1_alloc_devdata() and the deallocation to hfi1_free_devdata(). | 2024-05-24 | not yet calculated | CVE-2021-47523 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix minor-number leak on probe errors Make sure to release the allocated minor number before returning on probe errors. | 2024-05-24 | not yet calculated | CVE-2021-47524 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: fix use-after-free and memleak on unbind Deregister the port when unbinding the driver to prevent it from being used after releasing the driver data and leaking memory allocated by serial core. | 2024-05-24 | not yet calculated | CVE-2021-47525 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: serial: liteuart: Fix NULL pointer dereference in ->remove() drvdata has to be set in _probe() - otherwise platform_get_drvdata() causes null pointer dereference BUG in _remove(). | 2024-05-24 | not yet calculated | CVE-2021-47526 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: serial: core: fix transmit-buffer reset and memleak Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close") converted serial core to use tty_port_close() but failed to notice that the transmit buffer still needs to be freed on final close. Not freeing the transmit buffer means that the buffer is no longer cleared on next open so that any ioctl() waiting for the buffer to drain might wait indefinitely (e.g. on termios changes) or that stale data can end up being transmitted in case tx is restarted. Furthermore, the buffer of any port that has been opened would leak on driver unbind. Note that the port lock is held when clearing the buffer pointer due to the ldisc race worked around by commit a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()"). Also note that the tty-port shutdown() callback is not called for console ports so it is not strictly necessary to free the buffer page after releasing the lock (cf. d72402145ace ("tty/serial: do not free trasnmit buffer page under port lock")). | 2024-05-24 | not yet calculated | CVE-2021-47527 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code. | 2024-05-24 | not yet calculated | CVE-2021-47528 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: iwlwifi: Fix memory leaks in error handling path Should an error occur (invalid TLV len or memory allocation failure), the memory already allocated in 'reduce_power_data' should be freed before returning, otherwise it is leaking. | 2024-05-24 | not yet calculated | CVE-2021-47529 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix wait_fence submitqueue leak We weren't dropping the submitqueue reference in all paths. In particular, when the fence has already been signalled. Split out a helper to simplify handling this in the various different return paths. | 2024-05-24 | not yet calculated | CVE-2021-47530 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix mmap to include VM_IO and VM_DONTDUMP In commit 510410bfc034 ("drm/msm: Implement mmap as GEM object function") we switched to a new/cleaner method of doing things. That's good, but we missed a little bit. Before that commit, we used to _first_ run through the drm_gem_mmap_obj() case where `obj->funcs->mmap()` was NULL. That meant that we ran: vma->vm_flags |= VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP; vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); vma->vm_page_prot = pgprot_decrypted(vma->vm_page_prot); ...and _then_ we modified those mappings with our own. Now that `obj->funcs->mmap()` is no longer NULL we don't run the default code. It looks like the fact that the vm_flags got VM_IO / VM_DONTDUMP was important because we're now getting crashes on Chromebooks that use ARC++ while logging out. Specifically a crash that looks like this (this is on a 5.10 kernel w/ relevant backports but also seen on a 5.15 kernel): Unable to handle kernel paging request at virtual address ffffffc008000000 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008293d000 [ffffffc008000000] pgd=00000001002b3003, p4d=00000001002b3003, pud=00000001002b3003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP [...] CPU: 7 PID: 15734 Comm: crash_dump64 Tainted: G W 5.10.67 #1 [...] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) pc : __arch_copy_to_user+0xc0/0x30c lr : copyout+0xac/0x14c [...] Call trace: __arch_copy_to_user+0xc0/0x30c copy_page_to_iter+0x1a0/0x294 process_vm_rw_core+0x240/0x408 process_vm_rw+0x110/0x16c __arm64_sys_process_vm_readv+0x30/0x3c el0_svc_common+0xf8/0x250 do_el0_svc+0x30/0x80 el0_svc+0x10/0x1c el0_sync_handler+0x78/0x108 el0_sync+0x184/0x1c0 Code: f8408423 f80008c3 910020c6 36100082 (b8404423) Let's add the two flags back in. While we're at it, the fact that we aren't running the default means that we _don't_ need to clear out VM_PFNMAP, so remove that and save an instruction. NOTE: it was confirmed that VM_IO was the important flag to fix the problem I was seeing, but adding back VM_DONTDUMP seems like a sane thing to do so I'm doing that too. | 2024-05-24 | not yet calculated | CVE-2021-47531 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/msm/devfreq: Fix OPP refcnt leak | 2024-05-24 | not yet calculated | CVE-2021-47532 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: kms: Clear the HVS FIFO commit pointer once done Commit 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") introduced a wait on the previous commit done on a given HVS FIFO. However, we never cleared that pointer once done. Since drm_crtc_commit_put can free the drm_crtc_commit structure directly if we were the last user, this means that it can lead to a use-after free if we were to duplicate the state, and that stale pointer would even be copied to the new state. Set the pointer to NULL once we're done with the wait so that we don't carry over a pointer to a free'd structure. | 2024-05-24 | not yet calculated | CVE-2021-47533 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/vc4: kms: Add missing drm_crtc_commit_put Commit 9ec03d7f1ed3 ("drm/vc4: kms: Wait on previous FIFO users before a commit") introduced a global state for the HVS, with each FIFO storing the current CRTC commit so that we can properly synchronize commits. However, the refcounting was off and we thus ended up leaking the drm_crtc_commit structure every commit. Add a drm_crtc_commit_put to prevent the leakage. | 2024-05-24 | not yet calculated | CVE-2021-47534 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: Allocate enough space for GMU registers In commit 142639a52a01 ("drm/msm/a6xx: fix crashstate capture for A650") we changed a6xx_get_gmu_registers() to read 3 sets of registers. Unfortunately, we didn't change the memory allocation for the array. That leads to a KASAN warning (this was on the chromeos-5.4 kernel, which has the problematic commit backported to it): BUG: KASAN: slab-out-of-bounds in _a6xx_get_gmu_registers+0x144/0x430 Write of size 8 at addr ffffff80c89432b0 by task A618-worker/209 CPU: 5 PID: 209 Comm: A618-worker Tainted: G W 5.4.156-lockdep #22 Hardware name: Google Lazor Limozeen without Touchscreen (rev5 - rev8) (DT) Call trace: dump_backtrace+0x0/0x248 show_stack+0x20/0x2c dump_stack+0x128/0x1ec print_address_description+0x88/0x4a0 __kasan_report+0xfc/0x120 kasan_report+0x10/0x18 __asan_report_store8_noabort+0x1c/0x24 _a6xx_get_gmu_registers+0x144/0x430 a6xx_gpu_state_get+0x330/0x25d4 msm_gpu_crashstate_capture+0xa0/0x84c recover_worker+0x328/0x838 kthread_worker_fn+0x32c/0x574 kthread+0x2dc/0x39c ret_from_fork+0x10/0x18 Allocated by task 209: __kasan_kmalloc+0xfc/0x1c4 kasan_kmalloc+0xc/0x14 kmem_cache_alloc_trace+0x1f0/0x2a0 a6xx_gpu_state_get+0x164/0x25d4 msm_gpu_crashstate_capture+0xa0/0x84c recover_worker+0x328/0x838 kthread_worker_fn+0x32c/0x574 kthread+0x2dc/0x39c ret_from_fork+0x10/0x18 | 2024-05-24 | not yet calculated | CVE-2021-47535 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/smc: fix wrong list_del in smc_lgr_cleanup_early smc_lgr_cleanup_early() meant to delete the link group from the link group list, but it deleted the list head by mistake. This may cause memory corruption since we didn't remove the real link group from the list and later memseted the link group structure. We got a list corruption panic when testing: [ 231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000 [ 231.278222] ------------[ cut here ]------------ [ 231.278726] kernel BUG at lib/list_debug.c:53! [ 231.279326] invalid opcode: 0000 [#1] SMP NOPTI [ 231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435 [ 231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 [ 231.281248] Workqueue: events smc_link_down_work [ 231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90 [ 231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c 60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f> 0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc [ 231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292 [ 231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000 [ 231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040 [ 231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001 [ 231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001 [ 231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003 [ 231.288337] FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 231.289160] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0 [ 231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 231.291940] Call Trace: [ 231.292211] smc_lgr_terminate_sched+0x53/0xa0 [ 231.292677] smc_switch_conns+0x75/0x6b0 [ 231.293085] ? update_load_avg+0x1a6/0x590 [ 231.293517] ? ttwu_do_wakeup+0x17/0x150 [ 231.293907] ? update_load_avg+0x1a6/0x590 [ 231.294317] ? newidle_balance+0xca/0x3d0 [ 231.294716] smcr_link_down+0x50/0x1a0 [ 231.295090] ? __wake_up_common_lock+0x77/0x90 [ 231.295534] smc_link_down_work+0x46/0x60 [ 231.295933] process_one_work+0x18b/0x350 | 2024-05-24 | not yet calculated | CVE-2021-47536 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Fix a memleak bug in rvu_mbox_init() In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. | 2024-05-24 | not yet calculated | CVE-2021-47537 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer() Need to call rxrpc_put_local() for peer candidate before kfree() as it holds a ref to rxrpc_local. [DH: v2: Changed to abstract the peer freeing code out into a function] | 2024-05-24 | not yet calculated | CVE-2021-47538 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxrpc_peer leak in rxrpc_look_up_bundle() Need to call rxrpc_put_peer() for bundle candidate before kfree() as it holds a ref to rxrpc_peer. [DH: v2: Changed to abstract out the bundle freeing code into a function] | 2024-05-24 | not yet calculated | CVE-2021-47539 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode Fix the following NULL pointer dereference in mt7915_get_phy_mode routine adding an ibss interface to the mt7915 driver. [ 101.137097] wlan0: Trigger new scan to find an IBSS to join [ 102.827039] wlan0: Creating new IBSS network, BSSID 26:a4:50:1a:6e:69 [ 103.064756] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 103.073670] Mem abort info: [ 103.076520] ESR = 0x96000005 [ 103.079614] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.084934] SET = 0, FnV = 0 [ 103.088042] EA = 0, S1PTW = 0 [ 103.091215] Data abort info: [ 103.094104] ISV = 0, ISS = 0x00000005 [ 103.098041] CM = 0, WnR = 0 [ 103.101044] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000460b1000 [ 103.107565] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 103.116590] Internal error: Oops: 96000005 [#1] SMP [ 103.189066] CPU: 1 PID: 333 Comm: kworker/u4:3 Not tainted 5.10.75 #0 [ 103.195498] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 103.201124] Workqueue: phy0 ieee80211_iface_work [mac80211] [ 103.206695] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--) [ 103.212705] pc : mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.218103] lr : mt7915_mcu_add_bss_info+0x11c/0x760 [mt7915e] [ 103.223927] sp : ffffffc011cdb9e0 [ 103.227235] x29: ffffffc011cdb9e0 x28: ffffff8006563098 [ 103.232545] x27: ffffff8005f4da22 x26: ffffff800685ac40 [ 103.237855] x25: 0000000000000001 x24: 000000000000011f [ 103.243165] x23: ffffff8005f4e260 x22: ffffff8006567918 [ 103.248475] x21: ffffff8005f4df80 x20: ffffff800685ac58 [ 103.253785] x19: ffffff8006744400 x18: 0000000000000000 [ 103.259094] x17: 0000000000000000 x16: 0000000000000001 [ 103.264403] x15: 000899c3a2d9d2e4 x14: 000899bdc3c3a1c8 [ 103.269713] x13: 0000000000000000 x12: 0000000000000000 [ 103.275024] x11: ffffffc010e30c20 x10: 0000000000000000 [ 103.280333] x9 : 0000000000000050 x8 : ffffff8006567d88 [ 103.285642] x7 : ffffff8006563b5c x6 : ffffff8006563b44 [ 103.290952] x5 : 0000000000000002 x4 : 0000000000000001 [ 103.296262] x3 : 0000000000000001 x2 : 0000000000000001 [ 103.301572] x1 : 0000000000000000 x0 : 0000000000000011 [ 103.306882] Call trace: [ 103.309328] mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.314378] mt7915_bss_info_changed+0x198/0x200 [mt7915e] [ 103.319941] ieee80211_bss_info_change_notify+0x128/0x290 [mac80211] [ 103.326360] __ieee80211_sta_join_ibss+0x308/0x6c4 [mac80211] [ 103.332171] ieee80211_sta_create_ibss+0x8c/0x10c [mac80211] [ 103.337895] ieee80211_ibss_work+0x3dc/0x614 [mac80211] [ 103.343185] ieee80211_iface_work+0x388/0x3f0 [mac80211] [ 103.348495] process_one_work+0x288/0x690 [ 103.352499] worker_thread+0x70/0x464 [ 103.356157] kthread+0x144/0x150 [ 103.359380] ret_from_fork+0x10/0x18 [ 103.362952] Code: 394008c3 52800220 394000e4 7100007f (39400023) | 2024-05-24 | not yet calculated | CVE-2021-47540 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. | 2024-05-24 | not yet calculated | CVE-2021-47541 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. | 2024-05-24 | not yet calculated | CVE-2021-47542 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: perf report: Fix memory leaks around perf_tip() perf_tip() may allocate memory or use a literal, this means memory wasn't freed if allocated. Change the API so that literals aren't used. At the same time add missing frees for system_path. These issues were spotted using leak sanitizer. | 2024-05-24 | not yet calculated | CVE-2021-47543 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tcp: fix page frag corruption on page fault Steffen reported a TCP stream corruption for HTTP requests served by the apache web-server using a cifs mount-point and memory mapping the relevant file. The root cause is quite similar to the one addressed by commit 20eb4f29b602 ("net: fix sk_page_frag() recursion from memory reclaim"). Here the nested access to the task page frag is caused by a page fault on the (mmapped) user-space memory buffer coming from the cifs file. The page fault handler performs an smb transaction on a different socket, inside the same process context. Since sk->sk_allaction for such socket does not prevent the usage for the task_frag, the nested allocation modify "under the hood" the page frag in use by the outer sendmsg call, corrupting the stream. The overall relevant stack trace looks like the following: httpd 78268 [001] 3461630.850950: probe:tcp_sendmsg_locked: ffffffff91461d91 tcp_sendmsg_locked+0x1 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139814e sock_sendmsg+0x3e ffffffffc06dfe1d smb_send_kvec+0x28 [...] ffffffffc06cfaf8 cifs_readpages+0x213 ffffffff90e83c4b read_pages+0x6b ffffffff90e83f31 __do_page_cache_readahead+0x1c1 ffffffff90e79e98 filemap_fault+0x788 ffffffff90eb0458 __do_fault+0x38 ffffffff90eb5280 do_fault+0x1a0 ffffffff90eb7c84 __handle_mm_fault+0x4d4 ffffffff90eb8093 handle_mm_fault+0xc3 ffffffff90c74f6d __do_page_fault+0x1ed ffffffff90c75277 do_page_fault+0x37 ffffffff9160111e page_fault+0x1e ffffffff9109e7b5 copyin+0x25 ffffffff9109eb40 _copy_from_iter_full+0xe0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139815c sock_sendmsg+0x4c ffffffff913981f7 sock_write_iter+0x97 ffffffff90f2cc56 do_iter_readv_writev+0x156 ffffffff90f2dff0 do_iter_write+0x80 ffffffff90f2e1c3 vfs_writev+0xa3 ffffffff90f2e27c do_writev+0x5c ffffffff90c042bb do_syscall_64+0x5b ffffffff916000ad entry_SYSCALL_64_after_hwframe+0x65 The cifs filesystem rightfully sets sk_allocations to GFP_NOFS, we can avoid the nesting using the sk page frag for allocation lacking the __GFP_FS flag. Do not define an additional mm-helper for that, as this is strictly tied to the sk page frag usage. v1 -> v2: - use a stricted sk_page_frag() check instead of reordering the code (Eric) | 2024-05-24 | not yet calculated | CVE-2021-47544 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: perf hist: Fix memory leak of a perf_hpp_fmt perf_hpp__column_unregister() removes an entry from a list but doesn't free the memory causing a memory leak spotted by leak sanitizer. Add the free while at the same time reducing the scope of the function to static. | 2024-05-24 | not yet calculated | CVE-2021-47545 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix memory leak in fib6_rule_suppress The kernel leaks memory when a `fib` rule is present in IPv6 nftables firewall rules and a suppress_prefix rule is present in the IPv6 routing rules (used by certain tools such as wg-quick). In such scenarios, every incoming packet will leak an allocation in `ip6_dst_cache` slab cache. After some hours of `bpftrace`-ing and source code reading, I tracked down the issue to ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule"). The problem with that change is that the generic `args->flags` always have `FIB_LOOKUP_NOREF` set[1][2] but the IPv6-specific flag `RT6_LOOKUP_F_DST_NOREF` might not be, leading to `fib6_rule_suppress` not decreasing the refcount when needed. How to reproduce: - Add the following nftables rule to a prerouting chain: meta nfproto ipv6 fib saddr . mark . iif oif missing drop This can be done with: sudo nft create table inet test sudo nft create chain inet test test_chain '{ type filter hook prerouting priority filter + 10; policy accept; }' sudo nft add rule inet test test_chain meta nfproto ipv6 fib saddr . mark . iif oif missing drop - Run: sudo ip -6 rule add table main suppress_prefixlength 0 - Watch `sudo slabtop -o | grep ip6_dst_cache` to see memory usage increase with every incoming ipv6 packet. This patch exposes the protocol-specific flags to the protocol specific `suppress` function, and check the protocol-specific `flags` argument for RT6_LOOKUP_F_DST_NOREF instead of the generic FIB_LOOKUP_NOREF when decreasing the refcount, like this. [1]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L71 [2]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L99 | 2024-05-24 | not yet calculated | CVE-2021-47546 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8. At this time, the array 'lp->phy[8]' may be out of bound. | 2024-05-24 | not yet calculated | CVE-2021-47547 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() The if statement: if (port >= DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns. | 2024-05-24 | not yet calculated | CVE-2021-47548 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. | 2024-05-24 | not yet calculated | CVE-2021-47549 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdgpu: fix potential memleak In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed There is a potential memleak if not call kobject_put. | 2024-05-24 | not yet calculated | CVE-2021-47550 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch already been called, the start_cpsch will not be called since there is no resume in this case. When reset been triggered again, driver should avoid to do uninitialization again. | 2024-05-24 | not yet calculated | CVE-2021-47551 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() For avoiding to slow down queue destroy, we don't call blk_mq_quiesce_queue() in blk_cleanup_queue(), instead of delaying to cancel dispatch work in blk_release_queue(). However, this way has caused kernel oops[1], reported by Changhui. The log shows that scsi_device can be freed before running blk_release_queue(), which is expected too since scsi_device is released after the scsi disk is closed and the scsi_device is removed. Fixes the issue by canceling blk-mq dispatch work in both blk_cleanup_queue() and disk_release(): 1) when disk_release() is run, the disk has been closed, and any sync dispatch activities have been done, so canceling dispatch work is enough to quiesce filesystem I/O dispatch activity. 2) in blk_cleanup_queue(), we only focus on passthrough request, and passthrough request is always explicitly allocated & freed by its caller, so once queue is frozen, all sync dispatch activity for passthrough request has been done, then it is enough to just cancel dispatch work for avoiding any dispatch activity. [1] kernel panic log [12622.769416] BUG: kernel NULL pointer dereference, address: 0000000000000300 [12622.777186] #PF: supervisor read access in kernel mode [12622.782918] #PF: error_code(0x0000) - not-present page [12622.788649] PGD 0 P4D 0 [12622.791474] Oops: 0000 [#1] PREEMPT SMP PTI [12622.796138] CPU: 10 PID: 744 Comm: kworker/10:1H Kdump: loaded Not tainted 5.15.0+ #1 [12622.804877] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 1.5.4 10/002/2015 [12622.813321] Workqueue: kblockd blk_mq_run_work_fn [12622.818572] RIP: 0010:sbitmap_get+0x75/0x190 [12622.823336] Code: 85 80 00 00 00 41 8b 57 08 85 d2 0f 84 b1 00 00 00 45 31 e4 48 63 cd 48 8d 1c 49 48 c1 e3 06 49 03 5f 10 4c 8d 6b 40 83 f0 01 <48> 8b 33 44 89 f2 4c 89 ef 0f b6 c8 e8 fa f3 ff ff 83 f8 ff 75 58 [12622.844290] RSP: 0018:ffffb00a446dbd40 EFLAGS: 00010202 [12622.850120] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000004 [12622.858082] RDX: 0000000000000006 RSI: 0000000000000082 RDI: ffffa0b7a2dfe030 [12622.866042] RBP: 0000000000000004 R08: 0000000000000001 R09: ffffa0b742721334 [12622.874003] R10: 0000000000000008 R11: 0000000000000008 R12: 0000000000000000 [12622.881964] R13: 0000000000000340 R14: 0000000000000000 R15: ffffa0b7a2dfe030 [12622.889926] FS: 0000000000000000(0000) GS:ffffa0baafb40000(0000) knlGS:0000000000000000 [12622.898956] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12622.905367] CR2: 0000000000000300 CR3: 0000000641210001 CR4: 00000000001706e0 [12622.913328] Call Trace: [12622.916055] <TASK> [12622.918394] scsi_mq_get_budget+0x1a/0x110 [12622.922969] __blk_mq_do_dispatch_sched+0x1d4/0x320 [12622.928404] ? pick_next_task_fair+0x39/0x390 [12622.933268] __blk_mq_sched_dispatch_requests+0xf4/0x140 [12622.939194] blk_mq_sched_dispatch_requests+0x30/0x60 [12622.944829] __blk_mq_run_hw_queue+0x30/0xa0 [12622.949593] process_one_work+0x1e8/0x3c0 [12622.954059] worker_thread+0x50/0x3b0 [12622.958144] ? rescuer_thread+0x370/0x370 [12622.962616] kthread+0x158/0x180 [12622.966218] ? set_kthread_struct+0x40/0x40 [12622.970884] ret_from_fork+0x22/0x30 [12622.974875] </TASK> [12622.977309] Modules linked in: scsi_debug rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs sunrpc dm_multipath intel_rapl_msr intel_rapl_common dell_wmi_descriptor sb_edac rfkill video x86_pkg_temp_thermal intel_powerclamp dcdbas coretemp kvm_intel kvm mgag200 irqbypass i2c_algo_bit rapl drm_kms_helper ipmi_ssif intel_cstate intel_uncore syscopyarea sysfillrect sysimgblt fb_sys_fops pcspkr cec mei_me lpc_ich mei ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter drm fuse xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg ixgbe ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata megaraid_sas ghash_clmulni_intel tg3 wdat_w ---truncated--- | 2024-05-24 | not yet calculated | CVE-2021-47552 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: sched/scs: Reset task stack state in bringup_cpu() To hot unplug a CPU, the idle task on that CPU calls a few layers of C code before finally leaving the kernel. When KASAN is in use, poisoned shadow is left around for each of the active stack frames, and when shadow call stacks are in use. When shadow call stacks (SCS) are in use the task's saved SCS SP is left pointing at an arbitrary point within the task's shadow call stack. When a CPU is offlined than onlined back into the kernel, this stale state can adversely affect execution. Stale KASAN shadow can alias new stackframes and result in bogus KASAN warnings. A stale SCS SP is effectively a memory leak, and prevents a portion of the shadow call stack being used. Across a number of hotplug cycles the idle task's entire shadow call stack can become unusable. We previously fixed the KASAN issue in commit: e1b77c92981a5222 ("sched/kasan: remove stale KASAN poison after hotplug") ... by removing any stale KASAN stack poison immediately prior to onlining a CPU. Subsequently in commit: f1a0a376ca0c4ef1 ("sched/core: Initialize the idle task with preemption disabled") ... the refactoring left the KASAN and SCS cleanup in one-time idle thread initialization code rather than something invoked prior to each CPU being onlined, breaking both as above. We fixed SCS (but not KASAN) in commit: 63acd42c0d4942f7 ("sched/scs: Reset the shadow stack when idle_task_exit") ... but as this runs in the context of the idle task being offlined it's potentially fragile. To fix these consistently and more robustly, reset the SCS SP and KASAN shadow of a CPU's idle task immediately before we online that CPU in bringup_cpu(). This ensures the idle task always has a consistent state when it is running, and removes the need to so so when exiting an idle task. Whenever any thread is created, dup_task_struct() will give the task a stack which is free of KASAN shadow, and initialize the task's SCS SP, so there's no need to specially initialize either for idle thread within init_idle(), as this was only necessary to handle hotplug cycles. I've tested this on arm64 with: * gcc 11.1.0, defconfig +KASAN_INLINE, KASAN_STACK * clang 12.0.0, defconfig +KASAN_INLINE, KASAN_STACK, SHADOW_CALL_STACK ... offlining and onlining CPUS with: | while true; do | for C in /sys/devices/system/cpu/cpu*/online; do | echo 0 > $C; | echo 1 > $C; | done | done | 2024-05-24 | not yet calculated | CVE-2021-47553 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: avoid putting an uninitialized iova_domain The system will crash if we put an uninitialized iova_domain, this could happen when an error occurs before initializing the iova_domain in vdpasim_create(). BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0 ... Call Trace: <TASK> put_iova_domain+0x29/0x220 vdpasim_free+0xd1/0x120 [vdpa_sim] vdpa_release_dev+0x21/0x40 [vdpa] device_release+0x33/0x90 kobject_release+0x63/0x160 vdpasim_create+0x127/0x2a0 [vdpa_sim] vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net] vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa] genl_family_rcv_msg_doit+0x112/0x140 genl_rcv_msg+0xdf/0x1d0 ... So we must make sure the iova_domain is already initialized before put it. In addition, we may get the following warning in this case: WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70 So we must make sure the iova_cache_put() is invoked only if the iova_cache_get() is already invoked. Let's fix it together. | 2024-05-24 | not yet calculated | CVE-2021-47554 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: vlan: fix underflow for the real_dev refcnt Inject error before dev_hold(real_dev) in register_vlan_dev(), and execute the following testcase: ip link add dev dummy1 type dummy ip link add name dummy1.100 link dummy1 type vlan id 100 ip link del dev dummy1 When the dummy netdevice is removed, we will get a WARNING as following: ======================================================================= refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 and an endless loop of: ======================================================================= unregister_netdevice: waiting for dummy1 to become free. Usage count = -1073741824 That is because dev_put(real_dev) in vlan_dev_free() be called without dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev underflow. Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev symmetrical. | 2024-05-24 | not yet calculated | CVE-2021-47555 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce() ethtool_set_coalesce() now uses both the .get_coalesce() and .set_coalesce() callbacks. But the check for their availability is buggy, so changing the coalesce settings on a device where the driver provides only _one_ of the callbacks results in a NULL pointer dereference instead of an -EOPNOTSUPP. Fix the condition so that the availability of both callbacks is ensured. This also matches the netlink code. Note that reproducing this requires some effort - it only affects the legacy ioctl path, and needs a specific combination of driver options: - have .get_coalesce() and .coalesce_supported but no .set_coalesce(), or - have .set_coalesce() but no .get_coalesce(). Here eg. ethtool doesn't cause the crash as it first attempts to call ethtool_get_coalesce() and bails out on error. | 2024-05-24 | not yet calculated | CVE-2021-47556 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_ets: don't peek at classes beyond 'nbands' when the number of DRR classes decreases, the round-robin active list can contain elements that have already been freed in ets_qdisc_change(). As a consequence, it's possible to see a NULL dereference crash, caused by the attempt to call cl->qdisc->ops->peek(cl->qdisc) when cl->qdisc is NULL: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 910 Comm: mausezahn Not tainted 5.16.0-rc1+ #475 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:ets_qdisc_dequeue+0x129/0x2c0 [sch_ets] Code: c5 01 41 39 ad e4 02 00 00 0f 87 18 ff ff ff 49 8b 85 c0 02 00 00 49 39 c4 0f 84 ba 00 00 00 49 8b ad c0 02 00 00 48 8b 7d 10 <48> 8b 47 18 48 8b 40 38 0f ae e8 ff d0 48 89 c3 48 85 c0 0f 84 9d RSP: 0000:ffffbb36c0b5fdd8 EFLAGS: 00010287 RAX: ffff956678efed30 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffffffff9b938dc9 RDI: 0000000000000000 RBP: ffff956678efed30 R08: e2f3207fe360129c R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff956678efeac0 R13: ffff956678efe800 R14: ffff956611545000 R15: ffff95667ac8f100 FS: 00007f2aa9120740(0000) GS:ffff95667b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000011070c000 CR4: 0000000000350ee0 Call Trace: <TASK> qdisc_peek_dequeued+0x29/0x70 [sch_ets] tbf_dequeue+0x22/0x260 [sch_tbf] __qdisc_run+0x7f/0x630 net_tx_action+0x290/0x4c0 __do_softirq+0xee/0x4f8 irq_exit_rcu+0xf4/0x130 sysvec_apic_timer_interrupt+0x52/0xc0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0033:0x7f2aa7fc9ad4 Code: b9 ff ff 48 8b 54 24 18 48 83 c4 08 48 89 ee 48 89 df 5b 5d e9 ed fc ff ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa <53> 48 83 ec 10 48 8b 05 10 64 33 00 48 8b 00 48 85 c0 0f 85 84 00 RSP: 002b:00007ffe5d33fab8 EFLAGS: 00000202 RAX: 0000000000000002 RBX: 0000561f72c31460 RCX: 0000561f72c31720 RDX: 0000000000000002 RSI: 0000561f72c31722 RDI: 0000561f72c31720 RBP: 000000000000002a R08: 00007ffe5d33fa40 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 0000561f7187e380 R13: 0000000000000000 R14: 0000000000000000 R15: 0000561f72c31460 </TASK> Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt intel_rapl_msr iTCO_vendor_support intel_rapl_common joydev virtio_balloon lpc_ich i2c_i801 i2c_smbus pcspkr ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel serio_raw libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000018 Ensuring that 'alist' was never zeroed [1] was not sufficient, we need to remove from the active list those elements that are no more SP nor DRR. [1] https://lore.kernel.org/netdev/60d274838bf09777f0371253416e8af71360bc08.1633609148.git.dcaratti@redhat.com/ v3: fix race between ets_qdisc_change() and ets_qdisc_dequeue() delisting DRR classes beyond 'nbands' in ets_qdisc_change() with the qdisc lock acquired, thanks to Cong Wang. v2: when a NULL qdisc is found in the DRR active list, try to dequeue skb from the next list item. | 2024-05-24 | not yet calculated | CVE-2021-47557 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Disable Tx queues when reconfiguring the interface The Tx queues were not disabled in situations where the driver needed to stop the interface to apply a new configuration. This could result in a kernel panic when doing any of the 3 following actions: * reconfiguring the number of queues (ethtool -L) * reconfiguring the size of the ring buffers (ethtool -G) * installing/removing an XDP program (ip l set dev ethX xdp) Prevent the panic by making sure netif_tx_disable is called when stopping an interface. Without this patch, the following kernel panic can be observed when doing any of the actions above: Unable to handle kernel paging request at virtual address ffff80001238d040 [....] Call trace: dwmac4_set_addr+0x8/0x10 dev_hard_start_xmit+0xe4/0x1ac sch_direct_xmit+0xe8/0x39c __dev_queue_xmit+0x3ec/0xaf0 dev_queue_xmit+0x14/0x20 [...] [ end trace 0000000000000002 ]--- | 2024-05-24 | not yet calculated | CVE-2021-47558 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/smc: Fix NULL pointer dereferencing in smc_vlan_by_tcpsk() Coverity reports a possible NULL dereferencing problem: in smc_vlan_by_tcpsk(): 6. returned_null: netdev_lower_get_next returns NULL (checked 29 out of 30 times). 7. var_assigned: Assigning: ndev = NULL return value from netdev_lower_get_next. 1623 ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower); CID 1468509 (#1 of 1): Dereference null return value (NULL_RETURNS) 8. dereference: Dereferencing a pointer that might be NULL ndev when calling is_vlan_dev. 1624 if (is_vlan_dev(ndev)) { Remove the manual implementation and use netdev_walk_all_lower_dev() to iterate over the lower devices. While on it remove an obsolete function parameter comment. | 2024-05-24 | not yet calculated | CVE-2021-47559 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Protect driver from buggy firmware When processing port up/down events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not the CPU port (local port 0), which exists, but lacks a netdev. This can result in a NULL pointer dereference when calling netif_carrier_{on,off}(). Fix this by bailing early when processing an event reported for the CPU port. Problem was only observed when running on top of a buggy emulator. | 2024-05-24 | not yet calculated | CVE-2021-47560 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: i2c: virtio: disable timeout handling If a timeout is hit, it can result is incorrect data on the I2C bus and/or memory corruptions in the guest since the device can still be operating on the buffers it was given while the guest has freed them. Here is, for example, the start of a slub_debug splat which was triggered on the next transfer after one transfer was forced to timeout by setting a breakpoint in the backend (rust-vmm/vhost-device): BUG kmalloc-1k (Not tainted): Poison overwritten First byte 0x1 instead of 0x6b Allocated in virtio_i2c_xfer+0x65/0x35c age=350 cpu=0 pid=29 __kmalloc+0xc2/0x1c9 virtio_i2c_xfer+0x65/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 Freed in virtio_i2c_xfer+0x32e/0x35c age=244 cpu=0 pid=29 kfree+0x1bd/0x1cc virtio_i2c_xfer+0x32e/0x35c __i2c_transfer+0x429/0x57d i2c_transfer+0x115/0x134 i2cdev_ioctl_rdwr+0x16a/0x1de i2cdev_ioctl+0x247/0x2ed vfs_ioctl+0x21/0x30 sys_ioctl+0xb18/0xb41 There is no simple fix for this (the driver would have to always create bounce buffers and hold on to them until the device eventually returns the buffers), so just disable the timeout support for now. | 2024-05-24 | not yet calculated | CVE-2021-47561 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ice: fix vsi->txq_map sizing The approach of having XDP queue per CPU regardless of user's setting exposed a hidden bug that could occur in case when Rx queue count differ from Tx queue count. Currently vsi->txq_map's size is equal to the doubled vsi->alloc_txq, which is not correct due to the fact that XDP rings were previously based on the Rx queue count. Below splat can be seen when ethtool -L is used and XDP rings are configured: [ 682.875339] BUG: kernel NULL pointer dereference, address: 000000000000000f [ 682.883403] #PF: supervisor read access in kernel mode [ 682.889345] #PF: error_code(0x0000) - not-present page [ 682.895289] PGD 0 P4D 0 [ 682.898218] Oops: 0000 [#1] PREEMPT SMP PTI [ 682.903055] CPU: 42 PID: 2878 Comm: ethtool Tainted: G OE 5.15.0-rc5+ #1 [ 682.912214] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 682.923380] RIP: 0010:devres_remove+0x44/0x130 [ 682.928527] Code: 49 89 f4 55 48 89 fd 4c 89 ff 53 48 83 ec 10 e8 92 b9 49 00 48 8b 9d a8 02 00 00 48 8d 8d a0 02 00 00 49 89 c2 48 39 cb 74 0f <4c> 3b 63 10 74 25 48 8b 5b 08 48 39 cb 75 f1 4c 89 ff 4c 89 d6 e8 [ 682.950237] RSP: 0018:ffffc90006a679f0 EFLAGS: 00010002 [ 682.956285] RAX: 0000000000000286 RBX: ffffffffffffffff RCX: ffff88908343a370 [ 682.964538] RDX: 0000000000000001 RSI: ffffffff81690d60 RDI: 0000000000000000 [ 682.972789] RBP: ffff88908343a0d0 R08: 0000000000000000 R09: 0000000000000000 [ 682.981040] R10: 0000000000000286 R11: 3fffffffffffffff R12: ffffffff81690d60 [ 682.989282] R13: ffffffff81690a00 R14: ffff8890819807a8 R15: ffff88908343a36c [ 682.997535] FS: 00007f08c7bfa740(0000) GS:ffff88a03fd00000(0000) knlGS:0000000000000000 [ 683.006910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 683.013557] CR2: 000000000000000f CR3: 0000001080a66003 CR4: 00000000003706e0 [ 683.021819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 683.030075] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 683.038336] Call Trace: [ 683.041167] devm_kfree+0x33/0x50 [ 683.045004] ice_vsi_free_arrays+0x5e/0xc0 [ice] [ 683.050380] ice_vsi_rebuild+0x4c8/0x750 [ice] [ 683.055543] ice_vsi_recfg_qs+0x9a/0x110 [ice] [ 683.060697] ice_set_channels+0x14f/0x290 [ice] [ 683.065962] ethnl_set_channels+0x333/0x3f0 [ 683.070807] genl_family_rcv_msg_doit+0xea/0x150 [ 683.076152] genl_rcv_msg+0xde/0x1d0 [ 683.080289] ? channels_prepare_data+0x60/0x60 [ 683.085432] ? genl_get_cmd+0xd0/0xd0 [ 683.089667] netlink_rcv_skb+0x50/0xf0 [ 683.094006] genl_rcv+0x24/0x40 [ 683.097638] netlink_unicast+0x239/0x340 [ 683.102177] netlink_sendmsg+0x22e/0x470 [ 683.106717] sock_sendmsg+0x5e/0x60 [ 683.110756] __sys_sendto+0xee/0x150 [ 683.114894] ? handle_mm_fault+0xd0/0x2a0 [ 683.119535] ? do_user_addr_fault+0x1f3/0x690 [ 683.134173] __x64_sys_sendto+0x25/0x30 [ 683.148231] do_syscall_64+0x3b/0xc0 [ 683.161992] entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by taking into account the value that num_possible_cpus() yields in addition to vsi->alloc_txq instead of doubling the latter. | 2024-05-24 | not yet calculated | CVE-2021-47562 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ice: avoid bpf_prog refcount underflow Ice driver has the routines for managing XDP resources that are shared between ndo_bpf op and VSI rebuild flow. The latter takes place for example when user changes queue count on an interface via ethtool's set_channels(). There is an issue around the bpf_prog refcounting when VSI is being rebuilt - since ice_prepare_xdp_rings() is called with vsi->xdp_prog as an argument that is used later on by ice_vsi_assign_bpf_prog(), same bpf_prog pointers are swapped with each other. Then it is also interpreted as an 'old_prog' which in turn causes us to call bpf_prog_put on it that will decrement its refcount. Below splat can be interpreted in a way that due to zero refcount of a bpf_prog it is wiped out from the system while kernel still tries to refer to it: [ 481.069429] BUG: unable to handle page fault for address: ffffc9000640f038 [ 481.077390] #PF: supervisor read access in kernel mode [ 481.083335] #PF: error_code(0x0000) - not-present page [ 481.089276] PGD 100000067 P4D 100000067 PUD 1001cb067 PMD 106d2b067 PTE 0 [ 481.097141] Oops: 0000 [#1] PREEMPT SMP PTI [ 481.101980] CPU: 12 PID: 3339 Comm: sudo Tainted: G OE 5.15.0-rc5+ #1 [ 481.110840] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 481.122021] RIP: 0010:dev_xdp_prog_id+0x25/0x40 [ 481.127265] Code: 80 00 00 00 00 0f 1f 44 00 00 89 f6 48 c1 e6 04 48 01 fe 48 8b 86 98 08 00 00 48 85 c0 74 13 48 8b 50 18 31 c0 48 85 d2 74 07 <48> 8b 42 38 8b 40 20 c3 48 8b 96 90 08 00 00 eb e8 66 2e 0f 1f 84 [ 481.148991] RSP: 0018:ffffc90007b63868 EFLAGS: 00010286 [ 481.155034] RAX: 0000000000000000 RBX: ffff889080824000 RCX: 0000000000000000 [ 481.163278] RDX: ffffc9000640f000 RSI: ffff889080824010 RDI: ffff889080824000 [ 481.171527] RBP: ffff888107af7d00 R08: 0000000000000000 R09: ffff88810db5f6e0 [ 481.179776] R10: 0000000000000000 R11: ffff8890885b9988 R12: ffff88810db5f4bc [ 481.188026] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 481.196276] FS: 00007f5466d5bec0(0000) GS:ffff88903fb00000(0000) knlGS:0000000000000000 [ 481.205633] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 481.212279] CR2: ffffc9000640f038 CR3: 000000014429c006 CR4: 00000000003706e0 [ 481.220530] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 481.228771] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 481.237029] Call Trace: [ 481.239856] rtnl_fill_ifinfo+0x768/0x12e0 [ 481.244602] rtnl_dump_ifinfo+0x525/0x650 [ 481.249246] ? __alloc_skb+0xa5/0x280 [ 481.253484] netlink_dump+0x168/0x3c0 [ 481.257725] netlink_recvmsg+0x21e/0x3e0 [ 481.262263] ____sys_recvmsg+0x87/0x170 [ 481.266707] ? __might_fault+0x20/0x30 [ 481.271046] ? _copy_from_user+0x66/0xa0 [ 481.275591] ? iovec_from_user+0xf6/0x1c0 [ 481.280226] ___sys_recvmsg+0x82/0x100 [ 481.284566] ? sock_sendmsg+0x5e/0x60 [ 481.288791] ? __sys_sendto+0xee/0x150 [ 481.293129] __sys_recvmsg+0x56/0xa0 [ 481.297267] do_syscall_64+0x3b/0xc0 [ 481.301395] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 481.307238] RIP: 0033:0x7f5466f39617 [ 481.311373] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb bd 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2f 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 481.342944] RSP: 002b:00007ffedc7f4308 EFLAGS: 00000246 ORIG_RAX: 000000000000002f [ 481.361783] RAX: ffffffffffffffda RBX: 00007ffedc7f5460 RCX: 00007f5466f39617 [ 481.380278] RDX: 0000000000000000 RSI: 00007ffedc7f5360 RDI: 0000000000000003 [ 481.398500] RBP: 00007ffedc7f53f0 R08: 0000000000000000 R09: 000055d556f04d50 [ 481.416463] R10: 0000000000000077 R11: 0000000000000246 R12: 00007ffedc7f5360 [ 481.434131] R13: 00007ffedc7f5350 R14: 00007ffedc7f5344 R15: 0000000000000e98 [ 481.451520] Modules linked in: ice ---truncated--- | 2024-05-24 | not yet calculated | CVE-2021-47563 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: marvell: prestera: fix double free issue on err path fix error path handling in prestera_bridge_port_join() that cases prestera driver to crash (see below). Trace: Internal error: Oops: 96000044 [#1] SMP Modules linked in: prestera_pci prestera uio_pdrv_genirq CPU: 1 PID: 881 Comm: ip Not tainted 5.15.0 #1 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : prestera_bridge_destroy+0x2c/0xb0 [prestera] lr : prestera_bridge_port_join+0x2cc/0x350 [prestera] sp : ffff800011a1b0f0 ... x2 : ffff000109ca6c80 x1 : dead000000000100 x0 : dead000000000122 Call trace: prestera_bridge_destroy+0x2c/0xb0 [prestera] prestera_bridge_port_join+0x2cc/0x350 [prestera] prestera_netdev_port_event.constprop.0+0x3c4/0x450 [prestera] prestera_netdev_event_handler+0xf4/0x110 [prestera] raw_notifier_call_chain+0x54/0x80 call_netdevice_notifiers_info+0x54/0xa0 __netdev_upper_dev_link+0x19c/0x380 | 2024-05-24 | not yet calculated | CVE-2021-47564 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix kernel panic during drive powercycle test While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. | 2024-05-24 | not yet calculated | CVE-2021-47565 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: proc/vmcore: fix clearing user buffer by properly using clear_user() To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer. | 2024-05-24 | not yet calculated | CVE-2021-47566 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: powerpc/32: Fix hardlockup on vmap stack overflow Since the commit c118c7303ad5 ("powerpc/32: Fix vmap stack - Do not activate MMU before reading task struct") a vmap stack overflow results in a hard lockup. This is because emergency_ctx is still addressed with its virtual address allthough data MMU is not active anymore at that time. Fix it by using a physical address instead. | 2024-05-24 | not yet calculated | CVE-2021-47567 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix memleak in get_file_stream_info() Fix memleak in get_file_stream_info() | 2024-05-24 | not yet calculated | CVE-2021-47568 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: io_uring: fail cancellation for EXITING tasks WARNING: CPU: 1 PID: 20 at fs/io_uring.c:6269 io_try_cancel_userdata+0x3c5/0x640 fs/io_uring.c:6269 CPU: 1 PID: 20 Comm: kworker/1:0 Not tainted 5.16.0-rc1-syzkaller #0 Workqueue: events io_fallback_req_func RIP: 0010:io_try_cancel_userdata+0x3c5/0x640 fs/io_uring.c:6269 Call Trace: <TASK> io_req_task_link_timeout+0x6b/0x1e0 fs/io_uring.c:6886 io_fallback_req_func+0xf9/0x1ae fs/io_uring.c:1334 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> We need original task's context to do cancellations, so if it's dying and the callback is executed in a fallback mode, fail the cancellation attempt. | 2024-05-24 | not yet calculated | CVE-2021-47569 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: staging: r8188eu: fix a memory leak in rtw_wx_read32() Free "ptmp" before returning -EINVAL. | 2024-05-24 | not yet calculated | CVE-2021-47570 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect() The free_rtllib() function frees the "dev" pointer so there is use after free on the next line. Re-arrange things to avoid that. | 2024-05-24 | not yet calculated | CVE-2021-47571 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix null pointer dereference when IPv6 is not enabled When we try to add an IPv6 nexthop and IPv6 is not enabled (!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug has been present since the beginning of IPv6 nexthop gateway support. Commit 1aefd3de7bc6 ("ipv6: Add fib6_nh_init and release to stubs") tells us that only fib6_nh_init has a dummy stub because fib6_nh_release should not be called if fib6_nh_init returns an error, but the commit below added a call to ipv6_stub->fib6_nh_release in its error path. To fix it return the dummy stub's -EAFNOSUPPORT error directly without calling ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path. [1] Output is a bit truncated, but it clearly shows the error. BUG: kernel NULL pointer dereference, address: 000000000000000000 #PF: supervisor instruction fetch in kernel modede #PF: error_code(0x0010) - not-present pagege PGD 0 P4D 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ #446 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860 RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840 FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0 Call Trace: <TASK> nh_create_ipv6+0xed/0x10c rtm_new_nexthop+0x6d7/0x13f3 ? check_preemption_disabled+0x3d/0xf2 ? lock_is_held_type+0xbe/0xfd rtnetlink_rcv_msg+0x23f/0x26a ? check_preemption_disabled+0x3d/0xf2 ? rtnl_calcit.isra.0+0x147/0x147 netlink_rcv_skb+0x61/0xb2 netlink_unicast+0x100/0x187 netlink_sendmsg+0x37f/0x3a0 ? netlink_unicast+0x187/0x187 sock_sendmsg_nosec+0x67/0x9b ____sys_sendmsg+0x19d/0x1f9 ? copy_msghdr_from_user+0x4c/0x5e ? rcu_read_lock_any_held+0x2a/0x78 ___sys_sendmsg+0x6c/0x8c ? asm_sysvec_apic_timer_interrupt+0x12/0x20 ? lockdep_hardirqs_on+0xd9/0x102 ? sockfd_lookup_light+0x69/0x99 __sys_sendmsg+0x50/0x6e do_syscall_64+0xcb/0xf2 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f98dea28914 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53 RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914 RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008 R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001 R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0 </TASK> Modules linked in: bridge stp llc bonding virtio_net | 2024-05-24 | not yet calculated | CVE-2021-47572 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: vdpa: ifcvf: Do proper cleanup if IFCVF init fails ifcvf_mgmt_dev leaks memory if it is not freed before returning. Call is made to correct return statement so memory does not leak. ifcvf_init_hw does not take care of this so it is needed to do it here. | 2024-05-21 | not yet calculated | CVE-2022-48706 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix null pointer dereference for resetting decoder Not all decoders have a reset callback. The CXL specification allows a host bridge with a single root port to have no explicit HDM decoders. Currently the region driver assumes there are none. As such the CXL core creates a special pass through decoder instance without a commit/reset callback. Prior to this patch, the ->reset() callback was called unconditionally when calling cxl_region_decode_reset. Thus a configuration with 1 Host Bridge, 1 Root Port, and one directly attached CXL type 3 device or multiple CXL type 3 devices attached to downstream ports of a switch can cause a null pointer dereference. Before the fix, a kernel crash was observed when we destroy the region, and a pass through decoder is reset. The issue can be reproduced as below, 1) create a region with a CXL setup which includes a HB with a single root port under which a memdev is attached directly. 2) destroy the region with cxl destroy-region regionX -f. | 2024-05-21 | not yet calculated | CVE-2022-48707 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: pinctrl: single: fix potential NULL dereference Added checking of pointer "function" in pcs_set_mux(). pinmux_generic_get_function() can return NULL and the pointer "function" was dereferenced without checking against NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 2024-05-21 | not yet calculated | CVE-2022-48708 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ice: switch: fix potential memleak in ice_add_adv_recipe() When ice_add_special_words() fails, the 'rm' is not released, which will lead to a memory leak. Fix this up by going to 'err_unroll' label. Compile tested only. | 2024-05-21 | not yet calculated | CVE-2022-48709 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix a possible null pointer dereference In radeon_fp_native_mode(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. The failure status of drm_cvt_mode() on the other path is checked too. | 2024-05-21 | not yet calculated | CVE-2022-48710 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tipc: fix kernel warning when sending SYN message When sending a SYN message, this kernel stack trace is observed: ... [ 13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550 ... [ 13.398494] Call Trace: [ 13.398630] <TASK> [ 13.398630] ? __alloc_skb+0xed/0x1a0 [ 13.398630] tipc_msg_build+0x12c/0x670 [tipc] [ 13.398630] ? shmem_add_to_page_cache.isra.71+0x151/0x290 [ 13.398630] __tipc_sendmsg+0x2d1/0x710 [tipc] [ 13.398630] ? tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __local_bh_enable_ip+0x37/0x80 [ 13.398630] tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __sys_connect+0x9f/0xd0 [ 13.398630] __sys_connect+0x9f/0xd0 [ 13.398630] ? preempt_count_add+0x4d/0xa0 [ 13.398630] ? fpregs_assert_state_consistent+0x22/0x50 [ 13.398630] __x64_sys_connect+0x16/0x20 [ 13.398630] do_syscall_64+0x42/0x90 [ 13.398630] entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because commit a41dad905e5a ("iov_iter: saner checks for attempt to copy to/from iterator") has introduced sanity check for copying from/to iov iterator. Lacking of copy direction from the iterator viewpoint would lead to kernel stack trace like above. This commit fixes this issue by initializing the iov iterator with the correct copy direction when sending SYN or ACK without data. | 2024-05-21 | not yet calculated | CVE-2023-52700 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: use a bounce buffer for copying skb->mark syzbot found arm64 builds would crash in sock_recv_mark() when CONFIG_HARDENED_USERCOPY=y x86 and powerpc are not detecting the issue because they define user_access_begin. This will be handled in a different patch, because a check_object_size() is missing. Only data from skb->cb[] can be copied directly to/from user space, as explained in commit 79a8a642bf05 ("net: Whitelist the skbuff_head_cache "cb" field") syzbot report was: usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_head_cache' (offset 168, size 4)! ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:102 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 4410 Comm: syz-executor533 Not tainted 6.2.0-rc7-syzkaller-17907-g2d3827b3f393 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usercopy_abort+0x90/0x94 mm/usercopy.c:90 lr : usercopy_abort+0x90/0x94 mm/usercopy.c:90 sp : ffff80000fb9b9a0 x29: ffff80000fb9b9b0 x28: ffff0000c6073400 x27: 0000000020001a00 x26: 0000000000000014 x25: ffff80000cf52000 x24: fffffc0000000000 x23: 05ffc00000000200 x22: fffffc000324bf80 x21: ffff0000c92fe1a8 x20: 0000000000000001 x19: 0000000000000004 x18: 0000000000000000 x17: 656a626f2042554c x16: ffff0000c6073dd0 x15: ffff80000dbd2118 x14: ffff0000c6073400 x13: 00000000ffffffff x12: ffff0000c6073400 x11: ff808000081bbb4c x10: 0000000000000000 x9 : 7b0572d7cc0ccf00 x8 : 7b0572d7cc0ccf00 x7 : ffff80000bf650d4 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefbff08 x1 : 0000000100000000 x0 : 000000000000006c Call trace: usercopy_abort+0x90/0x94 mm/usercopy.c:90 __check_heap_object+0xa8/0x100 mm/slub.c:4761 check_heap_object mm/usercopy.c:196 [inline] __check_object_size+0x208/0x6b8 mm/usercopy.c:251 check_object_size include/linux/thread_info.h:199 [inline] __copy_to_user include/linux/uaccess.h:115 [inline] put_cmsg+0x408/0x464 net/core/scm.c:238 sock_recv_mark net/socket.c:975 [inline] __sock_recv_cmsgs+0x1fc/0x248 net/socket.c:984 sock_recv_cmsgs include/net/sock.h:2728 [inline] packet_recvmsg+0x2d8/0x678 net/packet/af_packet.c:3482 ____sys_recvmsg+0x110/0x3a0 ___sys_recvmsg net/socket.c:2737 [inline] __sys_recvmsg+0x194/0x210 net/socket.c:2767 __do_sys_recvmsg net/socket.c:2777 [inline] __se_sys_recvmsg net/socket.c:2774 [inline] __arm64_sys_recvmsg+0x2c/0x3c net/socket.c:2774 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x64/0x178 arch/arm64/kernel/syscall.c:52 el0_svc_common+0xbc/0x180 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x48/0x110 arch/arm64/kernel/syscall.c:193 el0_svc+0x58/0x14c arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: 91388800 aa0903e1 f90003e8 94e6d752 (d4210000) | 2024-05-21 | not yet calculated | CVE-2023-52701 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix possible memory leak in ovs_meter_cmd_set() old_meter needs to be free after it is detached regardless of whether the new meter is successfully attached. | 2024-05-21 | not yet calculated | CVE-2023-52702 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path syzbot reported that act_len in kalmia_send_init_packet() is uninitialized when passing it to the first usb_bulk_msg error path. Jiri Pirko noted that it's pointless to pass it in the error path, and that the value that would be printed in the second error path would be the value of act_len from the first call to usb_bulk_msg.[1] With this in mind, let's just not pass act_len to the usb_bulk_msg error paths. 1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/ | 2024-05-21 | not yet calculated | CVE-2023-52703 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: freezer,umh: Fix call_usermode_helper_exec() vs SIGKILL Tetsuo-San noted that commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic") broke call_usermodehelper_exec() for the KILLABLE case. Specifically it was missed that the second, unconditional, wait_for_completion() was not optional and ensures the on-stack completion is unused before going out-of-scope. | 2024-05-21 | not yet calculated | CVE-2023-52704 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix underflow in second superblock position calculations Macro NILFS_SB2_OFFSET_BYTES, which computes the position of the second superblock, underflows when the argument device size is less than 4096 bytes. Therefore, when using this macro, it is necessary to check in advance that the device size is not less than a lower limit, or at least that underflow does not occur. The current nilfs2 implementation lacks this check, causing out-of-bound block access when mounting devices smaller than 4096 bytes: I/O error, dev loop0, sector 36028797018963960 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 NILFS (loop0): unable to read secondary superblock (blocksize = 1024) In addition, when trying to resize the filesystem to a size below 4096 bytes, this underflow occurs in nilfs_resize_fs(), passing a huge number of segments to nilfs_sufile_resize(), corrupting parameters such as the number of segments in superblocks. This causes excessive loop iterations in nilfs_sufile_resize() during a subsequent resize ioctl, causing semaphore ns_segctor_sem to block for a long time and hang the writer thread: INFO: task segctord:5067 blocked for more than 143 seconds. Not tainted 6.2.0-rc8-syzkaller-00015-gf6feea56f66d #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:segctord state:D stack:23456 pid:5067 ppid:2 flags:0x00004000 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x1409/0x43f0 kernel/sched/core.c:6606 schedule+0xc3/0x190 kernel/sched/core.c:6682 rwsem_down_write_slowpath+0xfcf/0x14a0 kernel/locking/rwsem.c:1190 nilfs_transaction_lock+0x25c/0x4f0 fs/nilfs2/segment.c:357 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2486 [inline] nilfs_segctor_thread+0x52f/0x1140 fs/nilfs2/segment.c:2570 kthread+0x270/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> ... Call Trace: <TASK> folio_mark_accessed+0x51c/0xf00 mm/swap.c:515 __nilfs_get_page_block fs/nilfs2/page.c:42 [inline] nilfs_grab_buffer+0x3d3/0x540 fs/nilfs2/page.c:61 nilfs_mdt_submit_block+0xd7/0x8f0 fs/nilfs2/mdt.c:121 nilfs_mdt_read_block+0xeb/0x430 fs/nilfs2/mdt.c:176 nilfs_mdt_get_block+0x12d/0xbb0 fs/nilfs2/mdt.c:251 nilfs_sufile_get_segment_usage_block fs/nilfs2/sufile.c:92 [inline] nilfs_sufile_truncate_range fs/nilfs2/sufile.c:679 [inline] nilfs_sufile_resize+0x7a3/0x12b0 fs/nilfs2/sufile.c:777 nilfs_resize_fs+0x20c/0xed0 fs/nilfs2/super.c:422 nilfs_ioctl_resize fs/nilfs2/ioctl.c:1033 [inline] nilfs_ioctl+0x137c/0x2440 fs/nilfs2/ioctl.c:1301 ... This fixes these issues by inserting appropriate minimum device size checks or anti-underflow checks, depending on where the macro is used. | 2024-05-21 | not yet calculated | CVE-2023-52705 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: gpio: sim: fix a memory leak Fix an inverted logic bug in gpio_sim_remove_hogs() that leads to GPIO hog structures never being freed. | 2024-05-21 | not yet calculated | CVE-2023-52706 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: sched/psi: Fix use-after-free in ep_remove_wait_queue() If a non-root cgroup gets removed when there is a thread that registered trigger and is polling on a pressure file within the cgroup, the polling waitqueue gets freed in the following path: do_rmdir cgroup_rmdir kernfs_drain_open_files cgroup_file_release cgroup_pressure_release psi_trigger_destroy However, the polling thread still has a reference to the pressure file and will access the freed waitqueue when the file is closed or upon exit: fput ep_eventpoll_release ep_free ep_remove_wait_queue remove_wait_queue This results in use-after-free as pasted below. The fundamental problem here is that cgroup_file_release() (and consequently waitqueue's lifetime) is not tied to the file's real lifetime. Using wake_up_pollfree() here might be less than ideal, but it is in line with the comment at commit 42288cb44c4b ("wait: add wake_up_pollfree()") since the waitqueue's lifetime is not tied to file's one and can be considered as another special case. While this would be fixable by somehow making cgroup_file_release() be tied to the fput(), it would require sizable refactoring at cgroups or higher layer which might be more justifiable if we identify more cases like this. BUG: KASAN: use-after-free in _raw_spin_lock_irqsave+0x60/0xc0 Write of size 4 at addr ffff88810e625328 by task a.out/4404 CPU: 19 PID: 4404 Comm: a.out Not tainted 6.2.0-rc6 #38 Hardware name: Amazon EC2 c5a.8xlarge/, BIOS 1.0 10/16/2017 Call Trace: <TASK> dump_stack_lvl+0x73/0xa0 print_report+0x16c/0x4e0 kasan_report+0xc3/0xf0 kasan_check_range+0x2d2/0x310 _raw_spin_lock_irqsave+0x60/0xc0 remove_wait_queue+0x1a/0xa0 ep_free+0x12c/0x170 ep_eventpoll_release+0x26/0x30 __fput+0x202/0x400 task_work_run+0x11d/0x170 do_exit+0x495/0x1130 do_group_exit+0x100/0x100 get_signal+0xd67/0xde0 arch_do_signal_or_restart+0x2a/0x2b0 exit_to_user_mode_prepare+0x94/0x100 syscall_exit_to_user_mode+0x20/0x40 do_syscall_64+0x52/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> Allocated by task 4404: kasan_set_track+0x3d/0x60 __kasan_kmalloc+0x85/0x90 psi_trigger_create+0x113/0x3e0 pressure_write+0x146/0x2e0 cgroup_file_write+0x11c/0x250 kernfs_fop_write_iter+0x186/0x220 vfs_write+0x3d8/0x5c0 ksys_write+0x90/0x110 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 4407: kasan_set_track+0x3d/0x60 kasan_save_free_info+0x27/0x40 ____kasan_slab_free+0x11d/0x170 slab_free_freelist_hook+0x87/0x150 __kmem_cache_free+0xcb/0x180 psi_trigger_destroy+0x2e8/0x310 cgroup_file_release+0x4f/0xb0 kernfs_drain_open_files+0x165/0x1f0 kernfs_drain+0x162/0x1a0 __kernfs_remove+0x1fb/0x310 kernfs_remove_by_name_ns+0x95/0xe0 cgroup_addrm_files+0x67f/0x700 cgroup_destroy_locked+0x283/0x3c0 cgroup_rmdir+0x29/0x100 kernfs_iop_rmdir+0xd1/0x140 vfs_rmdir+0xfe/0x240 do_rmdir+0x13d/0x280 __x64_sys_rmdir+0x2c/0x30 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd | 2024-05-21 | not yet calculated | CVE-2023-52707 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mmc: mmc_spi: fix error handling in mmc_spi_probe() If mmc_add_host() fails, it doesn't need to call mmc_remove_host(), or it will cause null-ptr-deref, because of deleting a not added device in mmc_remove_host(). To fix this, goto label 'fail_glue_init', if mmc_add_host() fails, and change the label 'fail_add_host' to 'fail_gpiod_request'. | 2024-05-21 | not yet calculated | CVE-2023-52708 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mmc: sdio: fix possible resource leaks in some error paths If sdio_add_func() or sdio_init_func() fails, sdio_remove_func() can not release the resources, because the sdio function is not presented in these two cases, it won't call of_node_put() or put_device(). To fix these leaks, make sdio_func_present() only control whether device_del() needs to be called or not, then always call of_node_put() and put_device(). In error case in sdio_init_func(), the reference of 'card->dev' is not get, to avoid redundant put in sdio_free_func_cis(), move the get_device() to sdio_alloc_func() and put_device() to sdio_release_func(), it can keep the get/put function be balanced. Without this patch, while doing fault inject test, it can get the following leak reports, after this fix, the leak is gone. unreferenced object 0xffff888112514000 (size 2048): comm "kworker/3:2", pid 65, jiffies 4294741614 (age 124.774s) hex dump (first 32 bytes): 00 e0 6f 12 81 88 ff ff 60 58 8d 06 81 88 ff ff ..o.....`X...... 10 40 51 12 81 88 ff ff 10 40 51 12 81 88 ff ff .@Q......@Q..... backtrace: [<000000009e5931da>] kmalloc_trace+0x21/0x110 [<000000002f839ccb>] mmc_alloc_card+0x38/0xb0 [mmc_core] [<0000000004adcbf6>] mmc_sdio_init_card+0xde/0x170 [mmc_core] [<000000007538fea0>] mmc_attach_sdio+0xcb/0x1b0 [mmc_core] [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core] unreferenced object 0xffff888112511000 (size 2048): comm "kworker/3:2", pid 65, jiffies 4294741623 (age 124.766s) hex dump (first 32 bytes): 00 40 51 12 81 88 ff ff e0 58 8d 06 81 88 ff ff .@Q......X...... 10 10 51 12 81 88 ff ff 10 10 51 12 81 88 ff ff ..Q.......Q..... backtrace: [<000000009e5931da>] kmalloc_trace+0x21/0x110 [<00000000fcbe706c>] sdio_alloc_func+0x35/0x100 [mmc_core] [<00000000c68f4b50>] mmc_attach_sdio.cold.18+0xb1/0x395 [mmc_core] [<00000000d4fdeba7>] mmc_rescan+0x54a/0x640 [mmc_core] | 2024-05-21 | not yet calculated | CVE-2023-52730 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: fbdev: Fix invalid page access after closing deferred I/O devices When a fbdev with deferred I/O is once opened and closed, the dirty pages still remain queued in the pageref list, and eventually later those may be processed in the delayed work. This may lead to a corruption of pages, hitting an Oops. This patch makes sure to cancel the delayed work and clean up the pageref list at closing the device for addressing the bug. A part of the cleanup code is factored out as a new helper function that is called from the common fb_release(). | 2024-05-21 | not yet calculated | CVE-2023-52731 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ceph: blocklist the kclient when receiving corrupted snap trace When received corrupted snap trace we don't know what exactly has happened in MDS side. And we shouldn't continue IOs and metadatas access to MDS, which may corrupt or get incorrect contents. This patch will just block all the further IO/MDS requests immediately and then evict the kclient itself. The reason why we still need to evict the kclient just after blocking all the further IOs is that the MDS could revoke the caps faster. | 2024-05-21 | not yet calculated | CVE-2023-52732 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: s390/decompressor: specify __decompress() buf len to avoid overflow Historically calls to __decompress() didn't specify "out_len" parameter on many architectures including s390, expecting that no writes beyond uncompressed kernel image are performed. This has changed since commit 2aa14b1ab2c4 ("zstd: import usptream v1.5.2") which includes zstd library commit 6a7ede3dfccb ("Reduce size of dctx by reutilizing dst buffer (#2751)"). Now zstd decompression code might store literal buffer in the unwritten portion of the destination buffer. Since "out_len" is not set, it is considered to be unlimited and hence free to use for optimization needs. On s390 this might corrupt initrd or ipl report which are often placed right after the decompressor buffer. Luckily the size of uncompressed kernel image is already known to the decompressor, so to avoid the problem simply specify it in the "out_len" parameter. | 2024-05-21 | not yet calculated | CVE-2023-52733 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: sched: sch: Bounds check priority Nothing was explicitly bounds checking the priority index used to access clpriop[]. WARN and bail out early if it's pathological. Seen with GCC 13: ../net/sched/sch_htb.c: In function 'htb_activate_prios': ../net/sched/sch_htb.c:437:44: warning: array subscript [0, 31] is outside array bounds of 'struct htb_prio[8]' [-Warray-bounds=] 437 | if (p->inner.clprio[prio].feed.rb_node) | ~~~~~~~~~~~~~~~^~~~~~ ../net/sched/sch_htb.c:131:41: note: while referencing 'clprio' 131 | struct htb_prio clprio[TC_HTB_NUMPRIO]; | ^~~~~~ | 2024-05-21 | not yet calculated | CVE-2023-52734 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself sock_map proto callbacks should never call themselves by design. Protect against bugs like [1] and break out of the recursive loop to avoid a stack overflow in favor of a resource leak. [1] https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/ | 2024-05-21 | not yet calculated | CVE-2023-52735 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: Do not unset preset when cleaning up codec Several functions that take part in codec's initialization and removal are re-used by ASoC codec drivers implementations. Drivers mimic the behavior of hda_codec_driver_probe/remove() found in sound/pci/hda/hda_bind.c with their component->probe/remove() instead. One of the reasons for that is the expectation of snd_hda_codec_device_new() to receive a valid pointer to an instance of struct snd_card. This expectation can be met only once sound card components probing commences. As ASoC sound card may be unbound without codec device being actually removed from the system, unsetting ->preset in snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load scenario causing null-ptr-deref. Preset is assigned only once, during device/driver matching whereas ASoC codec driver's module reloading may occur several times throughout the lifetime of an audio stack. | 2024-05-21 | not yet calculated | CVE-2023-52736 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: btrfs: lock the inode in shared mode before starting fiemap Currently fiemap does not take the inode's lock (VFS lock), it only locks a file range in the inode's io tree. This however can lead to a deadlock if we have a concurrent fsync on the file and fiemap code triggers a fault when accessing the user space buffer with fiemap_fill_next_extent(). The deadlock happens on the inode's i_mmap_lock semaphore, which is taken both by fsync and btrfs_page_mkwrite(). This deadlock was recently reported by syzbot and triggers a trace like the following: task:syz-executor361 state:D stack:20264 pid:5668 ppid:5119 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6606 schedule+0xcb/0x190 kernel/sched/core.c:6682 wait_on_state fs/btrfs/extent-io-tree.c:707 [inline] wait_extent_bit+0x577/0x6f0 fs/btrfs/extent-io-tree.c:751 lock_extent+0x1c2/0x280 fs/btrfs/extent-io-tree.c:1742 find_lock_delalloc_range+0x4e6/0x9c0 fs/btrfs/extent_io.c:488 writepage_delalloc+0x1ef/0x540 fs/btrfs/extent_io.c:1863 __extent_writepage+0x736/0x14e0 fs/btrfs/extent_io.c:2174 extent_write_cache_pages+0x983/0x1220 fs/btrfs/extent_io.c:3091 extent_writepages+0x219/0x540 fs/btrfs/extent_io.c:3211 do_writepages+0x3c3/0x680 mm/page-writeback.c:2581 filemap_fdatawrite_wbc+0x11e/0x170 mm/filemap.c:388 __filemap_fdatawrite_range mm/filemap.c:421 [inline] filemap_fdatawrite_range+0x175/0x200 mm/filemap.c:439 btrfs_fdatawrite_range fs/btrfs/file.c:3850 [inline] start_ordered_ops fs/btrfs/file.c:1737 [inline] btrfs_sync_file+0x4ff/0x1190 fs/btrfs/file.c:1839 generic_write_sync include/linux/fs.h:2885 [inline] btrfs_do_write_iter+0xcd3/0x1280 fs/btrfs/file.c:1684 call_write_iter include/linux/fs.h:2189 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f7d4054e9b9 RSP: 002b:00007f7d404fa2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f7d405d87a0 RCX: 00007f7d4054e9b9 RDX: 0000000000000090 RSI: 0000000020000000 RDI: 0000000000000006 RBP: 00007f7d405a51d0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 61635f65646f6e69 R13: 65646f7475616f6e R14: 7261637369646f6e R15: 00007f7d405d87a8 </TASK> INFO: task syz-executor361:5697 blocked for more than 145 seconds. Not tainted 6.2.0-rc3-syzkaller-00376-g7c6984405241 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor361 state:D stack:21216 pid:5697 ppid:5119 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6606 schedule+0xcb/0x190 kernel/sched/core.c:6682 rwsem_down_read_slowpath+0x5f9/0x930 kernel/locking/rwsem.c:1095 __down_read_common+0x54/0x2a0 kernel/locking/rwsem.c:1260 btrfs_page_mkwrite+0x417/0xc80 fs/btrfs/inode.c:8526 do_page_mkwrite+0x19e/0x5e0 mm/memory.c:2947 wp_page_shared+0x15e/0x380 mm/memory.c:3295 handle_pte_fault mm/memory.c:4949 [inline] __handle_mm_fault mm/memory.c:5073 [inline] handle_mm_fault+0x1b79/0x26b0 mm/memory.c:5219 do_user_addr_fault+0x69b/0xcb0 arch/x86/mm/fault.c:1428 handle_page_fault arch/x86/mm/fault.c:1519 [inline] exc_page_fault+0x7a/0x110 arch/x86/mm/fault.c:1575 asm_exc_page_fault+0x22/0x30 arch/x86/include/asm/idtentry.h:570 RIP: 0010:copy_user_short_string+0xd/0x40 arch/x86/lib/copy_user_64.S:233 Code: 74 0a 89 (...) RSP: 0018:ffffc9000570f330 EFLAGS: 000502 ---truncated--- | 2024-05-21 | not yet calculated | CVE-2023-52737 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/fini Currently amdgpu calls drm_sched_fini() from the fence driver sw fini routine - such function is expected to be called only after the respective init function - drm_sched_init() - was executed successfully. Happens that we faced a driver probe failure in the Steam Deck recently, and the function drm_sched_fini() was called even without its counter-part had been previously called, causing the following oops: amdgpu: probe of 0000:04:00.0 failed with error -110 BUG: kernel NULL pointer dereference, address: 0000000000000090 PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 609 Comm: systemd-udevd Not tainted 6.2.0-rc3-gpiccoli #338 Hardware name: Valve Jupiter/Jupiter, BIOS F7A0113 11/04/2022 RIP: 0010:drm_sched_fini+0x84/0xa0 [gpu_sched] [...] Call Trace: <TASK> amdgpu_fence_driver_sw_fini+0xc8/0xd0 [amdgpu] amdgpu_device_fini_sw+0x2b/0x3b0 [amdgpu] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] devm_drm_dev_init_release+0x49/0x70 [...] To prevent that, check if the drm_sched was properly initialized for a given ring before calling its fini counter-part. Notice ideally we'd use sched.ready for that; such field is set as the latest thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such field - in the above oops for example, it was a GFX ring causing the crash, and the sched.ready field was set to true in the ring init routine, regardless of the state of the DRM scheduler. Hence, we ended-up using sched.ops as per Christian's suggestion [0], and also removed the no_scheduler check [1]. [0] https://lore.kernel.org/amd-gfx/984ee981-2906-0eaf-ccec-9f80975cb136@amd.com/ [1] https://lore.kernel.org/amd-gfx/cd0e2994-f85f-d837-609f-7056d5fb7231@amd.com/ | 2024-05-21 | not yet calculated | CVE-2023-52738 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Fix page corruption caused by racy check in __free_pages When we upgraded our kernel, we started seeing some page corruption like the following consistently: BUG: Bad page state in process ganesha.nfsd pfn:1304ca page:0000000022261c55 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x1304ca flags: 0x17ffffc0000000() raw: 0017ffffc0000000 ffff8a513ffd4c98 ffffeee24b35ec08 0000000000000000 raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount CPU: 0 PID: 15567 Comm: ganesha.nfsd Kdump: loaded Tainted: P B O 5.10.158-1.nutanix.20221209.el7.x86_64 #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/05/2016 Call Trace: dump_stack+0x74/0x96 bad_page.cold+0x63/0x94 check_new_page_bad+0x6d/0x80 rmqueue+0x46e/0x970 get_page_from_freelist+0xcb/0x3f0 ? _cond_resched+0x19/0x40 __alloc_pages_nodemask+0x164/0x300 alloc_pages_current+0x87/0xf0 skb_page_frag_refill+0x84/0x110 ... Sometimes, it would also show up as corruption in the free list pointer and cause crashes. After bisecting the issue, we found the issue started from commit e320d3012d25 ("mm/page_alloc.c: fix freeing non-compound pages"): if (put_page_testzero(page)) free_the_page(page, order); else if (!PageHead(page)) while (order-- > 0) free_the_page(page + (1 << order), order); So the problem is the check PageHead is racy because at this point we already dropped our reference to the page. So even if we came in with compound page, the page can already be freed and PageHead can return false and we will end up freeing all the tail pages causing double free. | 2024-05-21 | not yet calculated | CVE-2023-52739 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: powerpc/64s/interrupt: Fix interrupt exit race with security mitigation switch The RFI and STF security mitigation options can flip the interrupt_exit_not_reentrant static branch condition concurrently with the interrupt exit code which tests that branch. Interrupt exit tests this condition to set MSR[EE|RI] for exit, then again in the case a soft-masked interrupt is found pending, to recover the MSR so the interrupt can be replayed before attempting to exit again. If the condition changes between these two tests, the MSR and irq soft-mask state will become corrupted, leading to warnings and possible crashes. For example, if the branch is initially true then false, MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get enabled, leading to warnings in irq_64.c. | 2024-05-21 | not yet calculated | CVE-2023-52740 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix use-after-free in rdata->read_into_pages() When the network status is unstable, use-after-free may occur when read data from the server. BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0 Call Trace: <TASK> dump_stack_lvl+0x38/0x4c print_report+0x16f/0x4a6 kasan_report+0xb7/0x130 readpages_fill_pages+0x14c/0x7e0 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 </TASK> Allocated by task 2535: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 __kasan_kmalloc+0x82/0x90 cifs_readdata_direct_alloc+0x2c/0x110 cifs_readdata_alloc+0x2d/0x60 cifs_readahead+0x393/0xfe0 read_pages+0x12f/0x470 page_cache_ra_unbounded+0x1b1/0x240 filemap_get_pages+0x1c8/0x9a0 filemap_read+0x1c0/0x540 cifs_strict_readv+0x21b/0x240 vfs_read+0x395/0x4b0 ksys_read+0xb8/0x150 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 79: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x50 __kasan_slab_free+0x10e/0x1a0 __kmem_cache_free+0x7a/0x1a0 cifs_readdata_release+0x49/0x60 process_one_work+0x46c/0x760 worker_thread+0x2a4/0x6f0 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 Last potentially related work creation: kasan_save_stack+0x22/0x50 __kasan_record_aux_stack+0x95/0xb0 insert_work+0x2b/0x130 __queue_work+0x1fe/0x660 queue_work_on+0x4b/0x60 smb2_readv_callback+0x396/0x800 cifs_abort_connection+0x474/0x6a0 cifs_reconnect+0x5cb/0xa50 cifs_readv_from_socket.cold+0x22/0x6c cifs_read_page_from_socket+0xc1/0x100 readpages_fill_pages.cold+0x2f/0x46 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 The following function calls will cause UAF of the rdata pointer. readpages_fill_pages cifs_read_page_from_socket cifs_readv_from_socket cifs_reconnect __cifs_reconnect cifs_abort_connection mid->callback() --> smb2_readv_callback queue_work(&rdata->work) # if the worker completes first, # the rdata is freed cifs_readv_complete kref_put cifs_readdata_release kfree(rdata) return rdata->... # UAF in readpages_fill_pages() Similarly, this problem also occurs in the uncache_fill_pages(). Fix this by adjusts the order of condition judgment in the return statement. | 2024-05-21 | not yet calculated | CVE-2023-52741 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: USB: Fix wrong-direction WARNING in plusb.c The syzbot fuzzer detected a bug in the plusb network driver: A zero-length control-OUT transfer was treated as a read instead of a write. In modern kernels this error provokes a WARNING: usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0 WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 1 PID: 4645 Comm: dhcpcd Not tainted 6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 ... Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068 pl_vendor_req drivers/net/usb/plusb.c:60 [inline] pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline] pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889 __dev_open+0x297/0x4d0 net/core/dev.c:1417 __dev_change_flags+0x587/0x750 net/core/dev.c:8530 dev_change_flags+0x97/0x170 net/core/dev.c:8602 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979 sock_do_ioctl+0xcc/0x230 net/socket.c:1169 sock_ioctl+0x1f8/0x680 net/socket.c:1286 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and remove the USB_DIR_IN flag. | 2024-05-21 | not yet calculated | CVE-2023-52742 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ice: Do not use WQ_MEM_RECLAIM flag for workqueue When both ice and the irdma driver are loaded, a warning in check_flush_dependency is being triggered. This is due to ice driver workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one is not. According to kernel documentation, this flag should be set if the workqueue will be involved in the kernel's memory reclamation flow. Since it is not, there is no need for the ice driver's WQ to have this flag set so remove it. Example trace: [ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0 [ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel _rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1 0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_ core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ +0.000161] [last unloaded: bonding] [ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1 [ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ +0.000003] Workqueue: ice ice_service_task [ice] [ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0 [ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08 9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06 [ +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282 [ +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000 [ +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80 [ +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112 [ +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000 [ +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400 [ +0.000004] FS: 0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0 [ +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000002] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000002] <TASK> [ +0.000003] __flush_workqueue+0x203/0x840 [ +0.000006] ? mutex_unlock+0x84/0xd0 [ +0.000008] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? __pfx___flush_workqueue+0x10/0x10 [ +0.000006] ? mutex_lock+0xa3/0xf0 [ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core] [ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core] [ +0.000094] ib_unregister_device+0x25/0x30 [ib_core] [ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma] [ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma] [ +0.000059] ? up_write+0x5c/0x90 [ +0.000005] irdma_remove+0x36/0x90 [irdma] [ +0.000062] auxiliary_bus_remove+0x32/0x50 [ +0.000007] device_r ---truncated--- | 2024-05-21 | not yet calculated | CVE-2023-52743 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix potential NULL-ptr-dereference in_dev_get() can return NULL which will cause a failure once idev is dereferenced in in_dev_for_each_ifa_rtnl(). This patch adds a check for NULL value in idev beforehand. Found by Linux Verification Center (linuxtesting.org) with SVACE. | 2024-05-21 | not yet calculated | CVE-2023-52744 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: IB/IPoIB: Fix legacy IPoIB due to wrong number of queues The cited commit creates child PKEY interfaces over netlink will multiple tx and rx queues, but some devices doesn't support more than 1 tx and 1 rx queues. This causes to a crash when traffic is sent over the PKEY interface due to the parent having a single queue but the child having multiple queues. This patch fixes the number of queues to 1 for legacy IPoIB at the earliest possible point in time. BUG: kernel NULL pointer dereference, address: 000000000000036b PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 4 PID: 209665 Comm: python3 Not tainted 6.1.0_for_upstream_min_debug_2022_12_12_17_02 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmem_cache_alloc+0xcb/0x450 Code: ce 7e 49 8b 50 08 49 83 78 10 00 4d 8b 28 0f 84 cb 02 00 00 4d 85 ed 0f 84 c2 02 00 00 41 8b 44 24 28 48 8d 4a 01 49 8b 3c 24 <49> 8b 5c 05 00 4c 89 e8 65 48 0f c7 0f 0f 94 c0 84 c0 74 b8 41 8b RSP: 0018:ffff88822acbbab8 EFLAGS: 00010202 RAX: 0000000000000070 RBX: ffff8881c28e3e00 RCX: 00000000064f8dae RDX: 00000000064f8dad RSI: 0000000000000a20 RDI: 0000000000030d00 RBP: 0000000000000a20 R08: ffff8882f5d30d00 R09: ffff888104032f40 R10: ffff88810fade828 R11: 736f6d6570736575 R12: ffff88810081c000 R13: 00000000000002fb R14: ffffffff817fc865 R15: 0000000000000000 FS: 00007f9324ff9700(0000) GS:ffff8882f5d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036b CR3: 00000001125af004 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_clone+0x55/0xd0 ip6_finish_output2+0x3fe/0x690 ip6_finish_output+0xfa/0x310 ip6_send_skb+0x1e/0x60 udp_v6_send_skb+0x1e5/0x420 udpv6_sendmsg+0xb3c/0xe60 ? ip_mc_finish_output+0x180/0x180 ? __switch_to_asm+0x3a/0x60 ? __switch_to_asm+0x34/0x60 sock_sendmsg+0x33/0x40 __sys_sendto+0x103/0x160 ? _copy_to_user+0x21/0x30 ? kvm_clock_get_cycles+0xd/0x10 ? ktime_get_ts64+0x49/0xe0 __x64_sys_sendto+0x25/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f9374f1ed14 Code: 42 41 f8 ff 44 8b 4c 24 2c 4c 8b 44 24 20 89 c5 44 8b 54 24 28 48 8b 54 24 18 b8 2c 00 00 00 48 8b 74 24 10 8b 7c 24 08 0f 05 <48> 3d 00 f0 ff ff 77 34 89 ef 48 89 44 24 08 e8 68 41 f8 ff 48 8b RSP: 002b:00007f9324ff7bd0 EFLAGS: 00000293 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007f9324ff7cc8 RCX: 00007f9374f1ed14 RDX: 00000000000002fb RSI: 00007f93000052f0 RDI: 0000000000000030 RBP: 0000000000000000 R08: 00007f9324ff7d40 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 000000012a05f200 R14: 0000000000000001 R15: 00007f9374d57bdc </TASK> | 2024-05-21 | not yet calculated | CVE-2023-52745 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr() int type = nla_type(nla); if (type > XFRMA_MAX) { return -EOPNOTSUPP; } @type is then used as an array index and can be used as a Spectre v1 gadget. if (nla_len(nla) < compat_policy[type].len) { array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. | 2024-05-21 | not yet calculated | CVE-2023-52746 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Restore allocated resources on failed copyout Fix a resource leak if an error occurs. | 2024-05-21 | not yet calculated | CVE-2023-52747 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid format-overflow warning With gcc and W=1 option, there's a warning like this: fs/f2fs/compress.c: In function 'f2fs_init_page_array_cache': fs/f2fs/compress.c:1984:47: error: '%u' directive writing between 1 and 7 bytes into a region of size between 5 and 8 [-Werror=format-overflow=] 1984 | sprintf(slab_name, "f2fs_page_array_entry-%u:%u", MAJOR(dev), MINOR(dev)); | ^~ String "f2fs_page_array_entry-%u:%u" can up to 35. The first "%u" can up to 4 and the second "%u" can up to 7, so total size is "24 + 4 + 7 = 35". slab_name's size should be 35 rather than 32. | 2024-05-21 | not yet calculated | CVE-2023-52748 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: spi: Fix null dereference on suspend A race condition exists where a synchronous (noqueue) transfer can be active during a system suspend. This can cause a null pointer dereference exception to occur when the system resumes. Example order of events leading to the exception: 1. spi_sync() calls __spi_transfer_message_noqueue() which sets ctlr->cur_msg 2. Spi transfer begins via spi_transfer_one_message() 3. System is suspended interrupting the transfer context 4. System is resumed 6. spi_controller_resume() calls spi_start_queue() which resets cur_msg to NULL 7. Spi transfer context resumes and spi_finalize_current_message() is called which dereferences cur_msg (which is now NULL) Wait for synchronous transfers to complete before suspending by acquiring the bus mutex and setting/checking a suspend flag. | 2024-05-21 | not yet calculated | CVE-2023-52749 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly byte-swap NOP when compiling for big-endian, and the resulting series of bytes happened to match the encoding of FNMADD S21, S30, S0, S0. This went unnoticed until commit: 34f66c4c4d5518c1 ("arm64: Use a positive cpucap for FP/SIMD") Prior to that commit, the kernel would always enable the use of FPSIMD early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of FNMADD within the kernel was not detected, but could result in the corruption of user or kernel FPSIMD state. After that commit, the instructions happen to trap during boot prior to FPSIMD being detected and enabled, e.g. | Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD | CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __pi_strcmp+0x1c/0x150 | lr : populate_properties+0xe4/0x254 | sp : ffffd014173d3ad0 | x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000 | x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008 | x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044 | x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005 | x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000 | x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000 | x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000 | x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000 | x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a | x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8 | Kernel panic - not syncing: Unhandled exception | CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0xec/0x108 | show_stack+0x18/0x2c | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | panic+0x13c/0x340 | el1t_64_irq_handler+0x0/0x1c | el1_abort+0x0/0x5c | el1h_64_sync+0x64/0x68 | __pi_strcmp+0x1c/0x150 | unflatten_dt_nodes+0x1e8/0x2d8 | __unflatten_device_tree+0x5c/0x15c | unflatten_device_tree+0x38/0x50 | setup_arch+0x164/0x1e0 | start_kernel+0x64/0x38c | __primary_switched+0xbc/0xc4 Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked commit. | 2024-05-21 | not yet calculated | CVE-2023-52750 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free in smb2_query_info_compound() The following UAF was triggered when running fstests generic/072 with KASAN enabled against Windows Server 2022 and mount options 'multichannel,max_channels=2,vers=3.1.1,mfsymlinks,noperm' BUG: KASAN: slab-use-after-free in smb2_query_info_compound+0x423/0x6d0 [cifs] Read of size 8 at addr ffff888014941048 by task xfs_io/27534 CPU: 0 PID: 27534 Comm: xfs_io Not tainted 6.6.0-rc7 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0x7f ? srso_alias_return_thunk+0x5/0x7f ? __phys_addr+0x46/0x90 kasan_report+0xda/0x110 ? smb2_query_info_compound+0x423/0x6d0 [cifs] ? smb2_query_info_compound+0x423/0x6d0 [cifs] smb2_query_info_compound+0x423/0x6d0 [cifs] ? __pfx_smb2_query_info_compound+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0x7f ? __stack_depot_save+0x39/0x480 ? kasan_save_stack+0x33/0x60 ? kasan_set_track+0x25/0x30 ? ____kasan_slab_free+0x126/0x170 smb2_queryfs+0xc2/0x2c0 [cifs] ? __pfx_smb2_queryfs+0x10/0x10 [cifs] ? __pfx___lock_acquire+0x10/0x10 smb311_queryfs+0x210/0x220 [cifs] ? __pfx_smb311_queryfs+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0x7f ? __lock_acquire+0x480/0x26c0 ? lock_release+0x1ed/0x640 ? srso_alias_return_thunk+0x5/0x7f ? do_raw_spin_unlock+0x9b/0x100 cifs_statfs+0x18c/0x4b0 [cifs] statfs_by_dentry+0x9b/0xf0 fd_statfs+0x4e/0xb0 __do_sys_fstatfs+0x7f/0xe0 ? __pfx___do_sys_fstatfs+0x10/0x10 ? srso_alias_return_thunk+0x5/0x7f ? lockdep_hardirqs_on_prepare+0x136/0x200 ? srso_alias_return_thunk+0x5/0x7f do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 27534: kasan_save_stack+0x33/0x60 kasan_set_track+0x25/0x30 __kasan_kmalloc+0x8f/0xa0 open_cached_dir+0x71b/0x1240 [cifs] smb2_query_info_compound+0x5c3/0x6d0 [cifs] smb2_queryfs+0xc2/0x2c0 [cifs] smb311_queryfs+0x210/0x220 [cifs] cifs_statfs+0x18c/0x4b0 [cifs] statfs_by_dentry+0x9b/0xf0 fd_statfs+0x4e/0xb0 __do_sys_fstatfs+0x7f/0xe0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 27534: kasan_save_stack+0x33/0x60 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2b/0x50 ____kasan_slab_free+0x126/0x170 slab_free_freelist_hook+0xd0/0x1e0 __kmem_cache_free+0x9d/0x1b0 open_cached_dir+0xff5/0x1240 [cifs] smb2_query_info_compound+0x5c3/0x6d0 [cifs] smb2_queryfs+0xc2/0x2c0 [cifs] This is a race between open_cached_dir() and cached_dir_lease_break() where the cache entry for the open directory handle receives a lease break while creating it. And before returning from open_cached_dir(), we put the last reference of the new @cfid because of !@cfid->has_lease. Besides the UAF, while running xfstests a lot of missed lease breaks have been noticed in tests that run several concurrent statfs(2) calls on those cached fids CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame... CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1... CIFS: VFS: \\w22-root1.gandalf.test smb buf 00000000715bfe83 len 108 CIFS: VFS: Dump pending requests: CIFS: VFS: \\w22-root1.gandalf.test No task to wake, unknown frame... CIFS: VFS: \\w22-root1.gandalf.test Cmd: 18 Err: 0x0 Flags: 0x1... CIFS: VFS: \\w22-root1.gandalf.test smb buf 000000005aa7316e len 108 ... To fix both, in open_cached_dir() ensure that @cfid->has_lease is set right before sending out compounded request so that any potential lease break will be get processed by demultiplex thread while we're still caching @cfid. And, if open failed for some reason, re-check @cfid->has_lease to decide whether or not put lease reference. | 2024-05-21 | not yet calculated | CVE-2023-52751 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: imon: fix access to invalid resource for the second interface imon driver probes two USB interfaces, and at the probe of the second interface, the driver assumes blindly that the first interface got bound with the same imon driver. It's usually true, but it's still possible that the first interface is bound with another driver via a malformed descriptor. Then it may lead to a memory corruption, as spotted by syzkaller; imon driver accesses the data from drvdata as struct imon_context object although it's a completely different one that was assigned by another driver. This patch adds a sanity check -- whether the first interface is really bound with the imon driver or not -- for avoiding the problem above at the probe time. | 2024-05-21 | not yet calculated | CVE-2023-52754 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab out of bounds write in smb_inherit_dacl() slab out-of-bounds write is caused by that offsets is bigger than pntsd allocation size. This patch add the check to validate 3 offsets using allocation size. | 2024-05-21 | not yet calculated | CVE-2023-52755 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: pwm: Fix double shift bug These enums are passed to set/test_bit(). The set/test_bit() functions take a bit number instead of a shifted value. Passing a shifted value is a double shift bug like doing BIT(BIT(1)). The double shift bug doesn't cause a problem here because we are only checking 0 and 1 but if the value was 5 or above then it can lead to a buffer overflow. | 2024-05-21 | not yet calculated | CVE-2023-52756 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when releasing mids All release_mid() callers seem to hold a reference of @mid so there is no need to call kref_put(&mid->refcount, __release_mid) under @server->mid_lock spinlock. If they don't, then an use-after-free bug would have occurred anyways. By getting rid of such spinlock also fixes a potential deadlock as shown below CPU 0 CPU 1 ------------------------------------------------------------------ cifs_demultiplex_thread() cifs_debug_data_proc_show() release_mid() spin_lock(&server->mid_lock); spin_lock(&cifs_tcp_ses_lock) spin_lock(&server->mid_lock) __release_mid() smb2_find_smb_tcon() spin_lock(&cifs_tcp_ses_lock) *deadlock* | 2024-05-21 | not yet calculated | CVE-2023-52757 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: gfs2: ignore negated quota changes When lots of quota changes are made, there may be cases in which an inode's quota information is increased and then decreased, such as when blocks are added to a file, then deleted from it. If the timing is right, function do_qc can add pending quota changes to a transaction, then later, another call to do_qc can negate those changes, resulting in a net gain of 0. The quota_change information is recorded in the qc buffer (and qd element of the inode as well). The buffer is added to the transaction by the first call to do_qc, but a subsequent call changes the value from non-zero back to zero. At that point it's too late to remove the buffer_head from the transaction. Later, when the quota sync code is called, the zero-change qd element is discovered and flagged as an assert warning. If the fs is mounted with errors=panic, the kernel will panic. This is usually seen when files are truncated and the quota changes are negated by punch_hole/truncate which uses gfs2_quota_hold and gfs2_quota_unhold rather than block allocations that use gfs2_quota_lock and gfs2_quota_unlock which automatically do quota sync. This patch solves the problem by adding a check to qd_check_sync such that net-zero quota changes already added to the transaction are no longer deemed necessary to be synced, and skipped. In this case references are taken for the qd and the slot from do_qc so those need to be put. The normal sequence of events for a normal non-zero quota change is as follows: gfs2_quota_change do_qc qd_hold slot_hold Later, when the changes are to be synced: gfs2_quota_sync qd_fish qd_check_sync gets qd ref via lockref_get_not_dead do_sync do_qc(QC_SYNC) qd_put lockref_put_or_lock qd_unlock qd_put lockref_put_or_lock In the net-zero change case, we add a check to qd_check_sync so it puts the qd and slot references acquired in gfs2_quota_change and skip the unneeded sync. | 2024-05-21 | not yet calculated | CVE-2023-52759 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: riscv: VMAP_STACK overflow detection thread-safe commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to `shadow_stack` temporarily before switching finally to per-cpu `overflow_stack`. If two CPUs/harts are racing and end up in over flowing kernel stack, one or both will end up corrupting each other state because `shadow_stack` is not per-cpu. This patch optimizes per-cpu overflow stack switch by directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`. Following are the changes in this patch - Defines an asm macro to obtain per-cpu symbols in destination register. - In entry.S, when overflow is detected, per-cpu overflow stack is located using per-cpu asm macro. Computing per-cpu symbol requires a temporary register. x31 is saved away into CSR_SCRATCH (CSR_SCRATCH is anyways zero since we're in kernel). Please see Links for additional relevant disccussion and alternative solution. Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT` Kernel crash log below Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT Task stack: [0xff20000010a98000..0xff20000010a9c000] Overflow stack: [0xff600001f7d98370..0xff600001f7d99370] CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) epc : __memset+0x60/0xfc ra : recursive_loop+0x48/0xc6 [lkdtm] epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80 gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88 t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0 s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000 a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000 a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90 s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684 s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10 s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4 t5 : ffffffff815dbab8 t6 : ff20000010a9bb48 status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f Kernel panic - not syncing: Kernel stack overflow CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80006754>] dump_backtrace+0x30/0x38 [<ffffffff808de798>] show_stack+0x40/0x4c [<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c [<ffffffff808ea2d8>] dump_stack+0x18/0x20 [<ffffffff808dec06>] panic+0x126/0x2fe [<ffffffff800065ea>] walk_stackframe+0x0/0xf0 [<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm] SMP: stopping secondary CPUs ---[ end Kernel panic - not syncing: Kernel stack overflow ]--- | 2024-05-21 | not yet calculated | CVE-2023-52761 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: virtio-blk: fix implicit overflow on virtio_max_dma_size The following codes have an implicit conversion from size_t to u32: (u32)max_size = (size_t)virtio_max_dma_size(vdev); This may lead overflow, Ex (size_t)4G -> (u32)0. Once virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX instead. | 2024-05-21 | not yet calculated | CVE-2023-52762 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data. The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the driver to use DAT_data when it is NULL. | 2024-05-21 | not yet calculated | CVE-2023-52763 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: gspca: cpia1: shift-out-of-bounds in set_flicker Syzkaller reported the following issue: UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27 shift exponent 245 is too large for 32-bit type 'int' When the value of the variable "sd->params.exposure.gain" exceeds the number of bits in an integer, a shift-out-of-bounds error is reported. It is triggered because the variable "currentexp" cannot be left-shifted by more than the number of bits in an integer. In order to avoid invalid range during left-shift, the conditional expression is added. | 2024-05-21 | not yet calculated | CVE-2023-52764 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mfd: qcom-spmi-pmic: Fix revid implementation The Qualcomm SPMI PMIC revid implementation is broken in multiple ways. First, it assumes that just because the sibling base device has been registered that means that it is also bound to a driver, which may not be the case (e.g. due to probe deferral or asynchronous probe). This could trigger a NULL-pointer dereference when attempting to access the driver data of the unbound device. Second, it accesses driver data of a sibling device directly and without any locking, which means that the driver data may be freed while it is being accessed (e.g. on driver unbind). Third, it leaks a struct device reference to the sibling device which is looked up using the spmi_device_from_of() every time a function (child) device is calling the revid function (e.g. on probe). Fix this mess by reimplementing the revid lookup so that it is done only at probe of the PMIC device; the base device fetches the revid info from the hardware, while any secondary SPMI device fetches the information from the base device and caches it so that it can be accessed safely from its children. If the base device has not been probed yet then probe of a secondary device is deferred. | 2024-05-21 | not yet calculated | CVE-2023-52765 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler Do not loop over ring headers in hci_dma_irq_handler() that are not allocated and enabled in hci_dma_init(). Otherwise out of bounds access will occur from rings->headers[i] access when i >= number of allocated ring headers. | 2024-05-21 | not yet calculated | CVE-2023-52766 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tls: fix NULL deref on tls_sw_splice_eof() with empty record syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof(). | 2024-05-21 | not yet calculated | CVE-2023-52767 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: use vmm_table as array in wilc struct Enabling KASAN and running some iperf tests raises some memory issues with vmm_table: BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4 Write of size 4 at addr c3a61540 by task wlan0-tx/95 KASAN detects that we are writing data beyond range allocated to vmm_table. There is indeed a mismatch between the size passed to allocator in wilc_wlan_init, and the range of possible indexes used later: allocation size is missing a multiplication by sizeof(u32) | 2024-05-21 | not yet calculated | CVE-2023-52768 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: f2fs: split initial and dynamic conditions for extent_cache Let's allocate the extent_cache tree without dynamic conditions to avoid a missing condition causing a panic as below. # create a file w/ a compressed flag # disable the compression # panic while updating extent_cache F2FS-fs (dm-64): Swapfile: last extent is not aligned to section F2FS-fs (dm-64): Swapfile (3) is not align to section: 1) creat(), 2) ioctl(F2FS_IOC_SET_PIN_FILE), 3) fallocate(2097152 * N) Adding 124996k swap on ./swap-file. Priority:0 extents:2 across:17179494468k ================================================================== BUG: KASAN: null-ptr-deref in instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] BUG: KASAN: null-ptr-deref in atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] BUG: KASAN: null-ptr-deref in queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] BUG: KASAN: null-ptr-deref in __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] BUG: KASAN: null-ptr-deref in _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 Write of size 4 at addr 0000000000000030 by task syz-executor154/3327 CPU: 0 PID: 3327 Comm: syz-executor154 Tainted: G O 5.10.185 #1 Hardware name: emulation qemu-x86/qemu-x86, BIOS 2023.01-21885-gb3cc1cd24d 01/01/2023 Call Trace: __dump_stack out/common/lib/dump_stack.c:77 [inline] dump_stack_lvl+0x17e/0x1c4 out/common/lib/dump_stack.c:118 __kasan_report+0x16c/0x260 out/common/mm/kasan/report.c:415 kasan_report+0x51/0x70 out/common/mm/kasan/report.c:428 kasan_check_range+0x2f3/0x340 out/common/mm/kasan/generic.c:186 __kasan_check_write+0x14/0x20 out/common/mm/kasan/shadow.c:37 instrument_atomic_read_write out/common/include/linux/instrumented.h:101 [inline] atomic_try_cmpxchg_acquire out/common/include/asm-generic/atomic-instrumented.h:705 [inline] queued_write_lock out/common/include/asm-generic/qrwlock.h:92 [inline] __raw_write_lock out/common/include/linux/rwlock_api_smp.h:211 [inline] _raw_write_lock+0x5a/0x110 out/common/kernel/locking/spinlock.c:295 __drop_extent_tree+0xdf/0x2f0 out/common/fs/f2fs/extent_cache.c:1155 f2fs_drop_extent_tree+0x17/0x30 out/common/fs/f2fs/extent_cache.c:1172 f2fs_insert_range out/common/fs/f2fs/file.c:1600 [inline] f2fs_fallocate+0x19fd/0x1f40 out/common/fs/f2fs/file.c:1764 vfs_fallocate+0x514/0x9b0 out/common/fs/open.c:310 ksys_fallocate out/common/fs/open.c:333 [inline] __do_sys_fallocate out/common/fs/open.c:341 [inline] __se_sys_fallocate out/common/fs/open.c:339 [inline] __x64_sys_fallocate+0xb8/0x100 out/common/fs/open.c:339 do_syscall_64+0x35/0x50 out/common/arch/x86/entry/common.c:46 | 2024-05-21 | not yet calculated | CVE-2023-52770 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cxl/port: Fix delete_endpoint() vs parent unregistration race The CXL subsystem, at cxl_mem ->probe() time, establishes a lineage of ports (struct cxl_port objects) between an endpoint and the root of a CXL topology. Each port including the endpoint port is attached to the cxl_port driver. Given that setup, it follows that when either any port in that lineage goes through a cxl_port ->remove() event, or the memdev goes through a cxl_mem ->remove() event. The hierarchy below the removed port, or the entire hierarchy if the memdev is removed needs to come down. The delete_endpoint() callback is careful to check whether it is being called to tear down the hierarchy, or if it is only being called to teardown the memdev because an ancestor port is going through ->remove(). That care needs to take the device_lock() of the endpoint's parent. Which requires 2 bugs to be fixed: 1/ A reference on the parent is needed to prevent use-after-free scenarios like this signature: BUG: spinlock bad magic on CPU#0, kworker/u56:0/11 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023 Workqueue: cxl_port detach_memdev [cxl_core] RIP: 0010:spin_bug+0x65/0xa0 Call Trace: do_raw_spin_lock+0x69/0xa0 __mutex_lock+0x695/0xb80 delete_endpoint+0xad/0x150 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 detach_memdev+0x15/0x20 [cxl_core] process_one_work+0x1e3/0x4c0 worker_thread+0x1dd/0x3d0 2/ In the case of RCH topologies, the parent device that needs to be locked is not always @port->dev as returned by cxl_mem_find_port(), use endpoint->dev.parent instead. | 2024-05-21 | not yet calculated | CVE-2023-52771 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: s390/dasd: protect device queue against concurrent access In dasd_profile_start() the amount of requests on the device queue are counted. The access to the device queue is unprotected against concurrent access. With a lot of parallel I/O, especially with alias devices enabled, the device queue can change while dasd_profile_start() is accessing the queue. In the worst case this leads to a kernel panic due to incorrect pointer accesses. Fix this by taking the device lock before accessing the queue and counting the requests. Additionally the check for a valid profile data pointer can be done earlier to avoid unnecessary locking in a hot path. | 2024-05-21 | not yet calculated | CVE-2023-52774 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid data corruption caused by decline We found a data corruption issue during testing of SMC-R on Redis applications. The benchmark has a low probability of reporting a strange error as shown below. "Error: Protocol error, got "\xe2" as reply type byte" Finally, we found that the retrieved error data was as follows: 0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C 0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2 It is quite obvious that this is a SMC DECLINE message, which means that the applications received SMC protocol message. We found that this was caused by the following situations: client server ¦ clc proposal -------------> ¦ clc accept <------------- ¦ clc confirm -------------> wait llc confirm send llc confirm ¦failed llc confirm ¦ x------ (after 2s)timeout wait llc confirm rsp wait decline (after 1s) timeout (after 2s) timeout ¦ decline --------------> ¦ decline <-------------- As a result, a decline message was sent in the implementation, and this message was read from TCP by the already-fallback connection. This patch double the client timeout as 2x of the server value, With this simple change, the Decline messages should never cross or collide (during Confirm link timeout). This issue requires an immediate solution, since the protocol updates involve a more long-term solution. | 2024-05-21 | not yet calculated | CVE-2023-52775 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix dfs-radar and temperature event locking The ath12k active pdevs are protected by RCU but the DFS-radar and temperature event handling code calling ath12k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as RCU read-side critical sections to avoid any potential use-after-free issues. Note that the temperature event handler looks like a place holder currently but would still trigger an RCU lockdep splat. Compile tested only. | 2024-05-21 | not yet calculated | CVE-2023-52776 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix gtk offload status event locking The ath11k active pdevs are protected by RCU but the gtk offload status event handling code calling ath11k_mac_get_arvif_by_vdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. | 2024-05-21 | not yet calculated | CVE-2023-52777 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mptcp: deal with large GSO size After the blamed commit below, the TCP sockets (and the MPTCP subflows) can build egress packets larger than 64K. That exceeds the maximum DSS data size, the length being misrepresent on the wire and the stream being corrupted, as later observed on the receiver: WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0 CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705 RSP: 0018:ffffc90000006e80 EFLAGS: 00010246 RAX: ffffffff83e9f674 RBX: ffff88802f45d870 RCX: ffff888102ad0000 netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'. RDX: 0000000080000303 RSI: 0000000000013908 RDI: 0000000000003908 RBP: ffffc90000007110 R08: ffffffff83e9e078 R09: 1ffff1100e548c8a R10: dffffc0000000000 R11: ffffed100e548c8b R12: 0000000000013908 R13: dffffc0000000000 R14: 0000000000003908 R15: 000000000031cf29 FS: 00007f239c47e700(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f239c45cd78 CR3: 000000006a66c006 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <IRQ> mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819 subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409 tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151 tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098 tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483 tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749 ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438 ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483 ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304 __netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532 process_backlog+0x353/0x660 net/core/dev.c:5974 __napi_poll+0xc6/0x5a0 net/core/dev.c:6536 net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603 __do_softirq+0x184/0x524 kernel/softirq.c:553 do_softirq+0xdd/0x130 kernel/softirq.c:454 Address the issue explicitly bounding the maximum GSO size to what MPTCP actually allows. | 2024-05-21 | not yet calculated | CVE-2023-52778 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: fs: Pass AT_GETATTR_NOSEC flag to getattr interface function When vfs_getattr_nosec() calls a filesystem's getattr interface function then the 'nosec' should propagate into this function so that vfs_getattr_nosec() can again be called from the filesystem's gettattr rather than vfs_getattr(). The latter would add unnecessary security checks that the initial vfs_getattr_nosec() call wanted to avoid. Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass with the new getattr_flags parameter to the getattr interface function. In overlayfs and ecryptfs use this flag to determine which one of the two functions to call. In a recent code change introduced to IMA vfs_getattr_nosec() ended up calling vfs_getattr() in overlayfs, which in turn called security_inode_getattr() on an exiting process that did not have current->fs set anymore, which then caused a kernel NULL pointer dereference. With this change the call to security_inode_getattr() can be avoided, thus avoiding the NULL pointer dereference. | 2024-05-21 | not yet calculated | CVE-2023-52779 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: mvneta: fix calls to page_pool_get_stats Calling page_pool_get_stats in the mvneta driver without checks leads to kernel crashes. First the page pool is only available if the bm is not used. The page pool is also not allocated when the port is stopped. It can also be not allocated in case of errors. The current implementation leads to the following crash calling ethstats on a port that is down or when calling it at the wrong moment: ble to handle kernel NULL pointer dereference at virtual address 00000070 [00000070] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Hardware name: Marvell Armada 380/385 (Device Tree) PC is at page_pool_get_stats+0x18/0x1cc LR is at mvneta_ethtool_get_stats+0xa0/0xe0 [mvneta] pc : [<c0b413cc>] lr : [<bf0a98d8>] psr: a0000013 sp : f1439d48 ip : f1439dc0 fp : 0000001d r10: 00000100 r9 : c4816b80 r8 : f0d75150 r7 : bf0b400c r6 : c238f000 r5 : 00000000 r4 : f1439d68 r3 : c2091040 r2 : ffffffd8 r1 : f1439d68 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 066b004a DAC: 00000051 Register r0 information: NULL pointer Register r1 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r2 information: non-paged memory Register r3 information: slab kmalloc-2k start c2091000 pointer offset 64 size 2048 Register r4 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Register r5 information: NULL pointer Register r6 information: slab kmalloc-cg-4k start c238f000 pointer offset 0 size 4096 Register r7 information: 15-page vmalloc region starting at 0xbf0a8000 allocated at load_module+0xa30/0x219c Register r8 information: 1-page vmalloc region starting at 0xf0d75000 allocated at ethtool_get_stats+0x138/0x208 Register r9 information: slab task_struct start c4816b80 pointer offset 0 Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: 2-page vmalloc region starting at 0xf1438000 allocated at kernel_clone+0x9c/0x390 Process snmpd (pid: 733, stack limit = 0x38de3a88) Stack: (0xf1439d48 to 0xf143a000) 9d40: 000000c0 00000001 c238f000 bf0b400c f0d75150 c4816b80 9d60: 00000100 bf0a98d8 00000000 00000000 00000000 00000000 00000000 00000000 9d80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9da0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9dc0: 00000dc0 5335509c 00000035 c238f000 bf0b2214 01067f50 f0d75000 c0b9b9c8 9de0: 0000001d 00000035 c2212094 5335509c c4816b80 c238f000 c5ad6e00 01067f50 9e00: c1b0be80 c4816b80 00014813 c0b9d7f0 00000000 00000000 0000001d 0000001d 9e20: 00000000 00001200 00000000 00000000 c216ed90 c73943b8 00000000 00000000 9e40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9e60: 00000000 c0ad9034 00000000 00000000 00000000 00000000 00000000 00000000 9e80: 00000000 00000000 00000000 5335509c c1b0be80 f1439ee4 00008946 c1b0be80 9ea0: 01067f50 f1439ee3 00000000 00000046 b6d77ae0 c0b383f0 00008946 becc83e8 9ec0: c1b0be80 00000051 0000000b c68ca480 c7172d00 c0ad8ff0 f1439ee3 cf600e40 9ee0: 01600e40 32687465 00000000 00000000 00000000 01067f50 00000000 00000000 9f00: 00000000 5335509c 00008946 00008946 00000000 c68ca480 becc83e8 c05e2de0 9f20: f1439fb0 c03002f0 00000006 5ac3c35a c4816b80 00000006 b6d77ae0 c030caf0 9f40: c4817350 00000014 f1439e1c 0000000c 00000000 00000051 01000000 00000014 9f60: 00003fec f1439edc 00000001 c0372abc b6d77ae0 c0372abc cf600e40 5335509c 9f80: c21e6800 01015c9c 0000000b 00008946 00000036 c03002f0 c4816b80 00000036 9fa0: b6d77ae0 c03000c0 01015c9c 0000000b 0000000b 00008946 becc83e8 00000000 9fc0: 01015c9c 0000000b 00008946 00000036 00000035 010678a0 b6d797ec b6d77ae0 9fe0: b6dbf738 becc838c b6d186d7 b6baa858 40000030 0000000b 00000000 00000000 page_pool_get_s ---truncated--- | 2024-05-21 | not yet calculated | CVE-2023-52780 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: config: fix iteration issue in 'usb_get_bos_descriptor()' The BOS descriptor defines a root descriptor and is the base descriptor for accessing a family of related descriptors. Function 'usb_get_bos_descriptor()' encounters an iteration issue when skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in the same descriptor being read repeatedly. To address this issue, a 'goto' statement is introduced to ensure that the pointer and the amount read is updated correctly. This ensures that the function iterates to the next descriptor instead of reading the same descriptor repeatedly. | 2024-05-21 | not yet calculated | CVE-2023-52781 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Track xmit submission to PTP WQ after populating metadata map Ensure the skb is available in metadata mapping to skbs before tracking the metadata index for detecting undelivered CQEs. If the metadata index is put in the tracking list before putting the skb in the map, the metadata index might be used for detecting undelivered CQEs before the relevant skb is available in the map, which can lead to a null-ptr-deref. Log: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mlx5e_rx_dim_work [mlx5_core] RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07 RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206 RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005 RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028 RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383 R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40 R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x3c/0xa0 ? exc_general_protection+0x144/0x210 ? asm_exc_general_protection+0x22/0x30 ? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core] ? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core] __napi_poll.constprop.0+0xa4/0x580 net_rx_action+0x460/0xb80 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? __napi_poll.constprop.0+0x580/0x580 ? tasklet_action_common.isra.0+0x2ef/0x760 __do_softirq+0x26c/0x827 irq_exit_rcu+0xc2/0x100 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:__kmem_cache_alloc_node+0xb/0x330 Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83 RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246 RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218 RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0 RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9 R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0 R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450 ? cmd_exec+0x796/0x2200 [mlx5_core] kmalloc_trace+0x26/0xc0 cmd_exec+0x796/0x2200 [mlx5_core] mlx5_cmd_do+0x22/0xc0 [mlx5_core] mlx5_cmd_exec+0x17/0x30 [mlx5_core] mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core] ? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core] ? lockdep_set_lock_cmp_fn+0x190/0x190 ? process_one_work+0x659/0x1220 mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core] process_one_work+0x730/0x1220 ? lockdep_hardirqs_on_prepare+0x400/0x400 ? max_active_store+0xf0/0xf0 ? assign_work+0x168/0x240 worker_thread+0x70f/0x12d0 ? __kthread_parkme+0xd1/0x1d0 ? process_one_work+0x1220/0x1220 kthread+0x2d9/0x3b0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_as ---truncated--- | 2024-05-21 | not yet calculated | CVE-2023-52782 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bonding: stop the device in bond_setup_by_slave() Commit 9eed321cde22 ("net: lapbether: only support ethernet devices") has been able to keep syzbot away from net/lapb, until today. In the following splat [1], the issue is that a lapbether device has been created on a bonding device without members. Then adding a non ARPHRD_ETHER member forced the bonding master to change its type. The fix is to make sure we call dev_close() in bond_setup_by_slave() so that the potential linked lapbether devices (or any other devices having assumptions on the physical device) are removed. A similar bug has been addressed in commit 40baec225765 ("bonding: fix panic on non-ARPHRD_ETHER enslave failure") [1] skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0 kernel BUG at net/core/skbuff.c:192 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:188 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 lr : skb_panic net/core/skbuff.c:188 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 sp : ffff800096a06aa0 x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000 x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100 x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001 x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00 x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:188 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:202 skb_push+0xf0/0x108 net/core/skbuff.c:2446 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384 dev_hard_header include/linux/netdevice.h:3136 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 __lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326 lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1970 [inline] call_netdevice_notifiers_extack net/core/dev.c:2008 [inline] call_netdevice_notifiers net/core/dev.c:2022 [inline] __dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508 dev_close_many+0x1e0/0x470 net/core/dev.c:1559 dev_close+0x174/0x250 net/core/dev.c:1585 bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332 bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539 dev_ifsioc+0x754/0x9ac dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786 sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217 sock_ioctl+0x4e8/0x834 net/socket.c:1322 vfs_ioctl fs/ioctl.c:51 [inline] __do_ ---truncated--- | 2024-05-21 | not yet calculated | CVE-2023-52784 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR If command timeout happens and cq complete IRQ is raised at the same time, ufshcd_mcq_abort clears lprb->cmd and a NULL pointer deref happens in the ISR. Error log: ufshcd_abort: Device abort task at tag 18 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 pc : [0xffffffe27ef867ac] scsi_dma_unmap+0xc/0x44 lr : [0xffffffe27f1b898c] ufshcd_release_scsi_cmd+0x24/0x114 | 2024-05-21 | not yet calculated | CVE-2023-52785 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ext4: fix racy may inline data check in dio write syzbot reports that the following warning from ext4_iomap_begin() triggers as of the commit referenced below: if (WARN_ON_ONCE(ext4_has_inline_data(inode))) return -ERANGE; This occurs during a dio write, which is never expected to encounter an inode with inline data. To enforce this behavior, ext4_dio_write_iter() checks the current inline state of the inode and clears the MAY_INLINE_DATA state flag to either fall back to buffered writes, or enforce that any other writers in progress on the inode are not allowed to create inline data. The problem is that the check for existing inline data and the state flag can span a lock cycle. For example, if the ilock is originally locked shared and subsequently upgraded to exclusive, another writer may have reacquired the lock and created inline data before the dio write task acquires the lock and proceeds. The commit referenced below loosens the lock requirements to allow some forms of unaligned dio writes to occur under shared lock, but AFAICT the inline data check was technically already racy for any dio write that would have involved a lock cycle. Regardless, lift clearing of the state bit to the same lock critical section that checks for preexisting inline data on the inode to close the race. | 2024-05-21 | not yet calculated | CVE-2023-52786 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: blk-mq: make sure active queue usage is held for bio_integrity_prep() blk_integrity_unregister() can come if queue usage counter isn't held for one bio with integrity prepared, so this request may be completed with calling profile->complete_fn, then kernel panic. Another constraint is that bio_integrity_prep() needs to be called before bio merge. Fix the issue by: - call bio_integrity_prep() with one queue usage counter grabbed reliably - call bio_integrity_prep() before bio merge | 2024-05-21 | not yet calculated | CVE-2023-52787 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: i915/perf: Fix NULL deref bugs with drm_dbg() calls When i915 perf interface is not available dereferencing it will lead to NULL dereferences. As returning -ENOTSUPP is pretty clear return when perf interface is not available. [tursulin: added stable tag] (cherry picked from commit 36f27350ff745bd228ab04d7845dfbffc177a889) | 2024-05-21 | not yet calculated | CVE-2023-52788 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tty: vcc: Add check for kstrdup() in vcc_probe() Add check for the return value of kstrdup() and return the error, if it fails in order to avoid NULL pointer dereference. | 2024-05-21 | not yet calculated | CVE-2023-52789 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC Limit the free list length to the size of the IO TLB. Transient pool can be smaller than IO_TLB_SEGSIZE, but the free list is initialized with the assumption that the total number of slots is a multiple of IO_TLB_SEGSIZE. As a result, swiotlb_area_find_slots() may allocate slots past the end of a transient IO TLB buffer. | 2024-05-21 | not yet calculated | CVE-2023-52790 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: i2c: core: Run atomic i2c xfer when !preemptible Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA). panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like: [ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0 [ 12.676926] Voluntary context switch within RCU read-side critical section! ... [ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114 [ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70 ... [ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58 [ 13.001050] machine_restart from panic+0x2a8/0x32c Use !preemptible() instead, which is basically the same check as pre-v5.2. | 2024-05-21 | not yet calculated | CVE-2023-52791 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cxl/region: Do not try to cleanup after cxl_region_setup_targets() fails Commit 5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()") tried to avoid 'eiw' initialization errors when ->nr_targets exceeded 16, by just decrementing ->nr_targets when cxl_region_setup_targets() failed. Commit 86987c766276 ("cxl/region: Cleanup target list on attach error") extended that cleanup to also clear cxled->pos and p->targets[pos]. The initialization error was incidentally fixed separately by: Commit 8d4285425714 ("cxl/region: Fix port setup uninitialized variable warnings") which was merged a few days after 5e42bcbc3fef. But now the original cleanup when cxl_region_setup_targets() fails prevents endpoint and switch decoder resources from being reused: 1) the cleanup does not set the decoder's region to NULL, which results in future dpa_size_store() calls returning -EBUSY 2) the decoder is not properly freed, which results in future commit errors associated with the upstream switch Now that the initialization errors were fixed separately, the proper cleanup for this case is to just return immediately. Then the resources associated with this target get cleanup up as normal when the failed region is deleted. The ->nr_targets decrement in the error case also helped prevent a p->targets[] array overflow, so add a new check to prevent against that overflow. Tested by trying to create an invalid region for a 2 switch * 2 endpoint topology, and then following up with creating a valid region. | 2024-05-21 | not yet calculated | CVE-2023-52792 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: thermal: intel: powerclamp: fix mismatch in get function for max_idle KASAN reported this [ 444.853098] BUG: KASAN: global-out-of-bounds in param_get_int+0x77/0x90 [ 444.853111] Read of size 4 at addr ffffffffc16c9220 by task cat/2105 ... [ 444.853442] The buggy address belongs to the variable: [ 444.853443] max_idle+0x0/0xffffffffffffcde0 [intel_powerclamp] There is a mismatch between the param_get_int and the definition of max_idle. Replacing param_get_int with param_get_byte resolves this issue. | 2024-05-21 | not yet calculated | CVE-2023-52794 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: fix use after free in vhost_vdpa_probe() The put_device() calls vhost_vdpa_release_dev() which calls ida_simple_remove() and frees "v". So this call to ida_simple_remove() is a use after free and a double free. | 2024-05-21 | not yet calculated | CVE-2023-52795 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ipvlan: add ipvlan_route_v6_outbound() helper Inspired by syzbot reports using a stack of multiple ipvlan devices. Reduce stack size needed in ipvlan_process_v6_outbound() by moving the flowi6 struct used for the route lookup in an non inlined helper. ipvlan_route_v6_outbound() needs 120 bytes on the stack, immediately reclaimed. Also make sure ipvlan_process_v4_outbound() is not inlined. We might also have to lower MAX_NEST_DEV, because only syzbot uses setups with more than four stacked devices. BUG: TASK stack guard page was hit at ffffc9000e803ff8 (stack is ffffc9000e804000..ffffc9000e808000) stack guard page: 0000 [#1] SMP KASAN CPU: 0 PID: 13442 Comm: syz-executor.4 Not tainted 6.1.52-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023 RIP: 0010:kasan_check_range+0x4/0x2a0 mm/kasan/generic.c:188 Code: 48 01 c6 48 89 c7 e8 db 4e c1 03 31 c0 5d c3 cc 0f 0b eb 02 0f 0b b8 ea ff ff ff 5d c3 cc 00 00 cc cc 00 00 cc cc 55 48 89 e5 <41> 57 41 56 41 55 41 54 53 b0 01 48 85 f6 0f 84 a4 01 00 00 48 89 RSP: 0018:ffffc9000e804000 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff817e5bf2 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff887c6568 RBP: ffffc9000e804000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff92001d0080c R13: dffffc0000000000 R14: ffffffff87e6b100 R15: 0000000000000000 FS: 00007fd0c55826c0(0000) GS:ffff8881f6800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000e803ff8 CR3: 0000000170ef7000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <#DF> </#DF> <TASK> [<ffffffff81f281d1>] __kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31 [<ffffffff817e5bf2>] instrument_atomic_read include/linux/instrumented.h:72 [inline] [<ffffffff817e5bf2>] _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] [<ffffffff817e5bf2>] cpumask_test_cpu include/linux/cpumask.h:506 [inline] [<ffffffff817e5bf2>] cpu_online include/linux/cpumask.h:1092 [inline] [<ffffffff817e5bf2>] trace_lock_acquire include/trace/events/lock.h:24 [inline] [<ffffffff817e5bf2>] lock_acquire+0xe2/0x590 kernel/locking/lockdep.c:5632 [<ffffffff8563221e>] rcu_lock_acquire+0x2e/0x40 include/linux/rcupdate.h:306 [<ffffffff8561464d>] rcu_read_lock include/linux/rcupdate.h:747 [inline] [<ffffffff8561464d>] ip6_pol_route+0x15d/0x1440 net/ipv6/route.c:2221 [<ffffffff85618120>] ip6_pol_route_output+0x50/0x80 net/ipv6/route.c:2606 [<ffffffff856f65b5>] pol_lookup_func include/net/ip6_fib.h:584 [inline] [<ffffffff856f65b5>] fib6_rule_lookup+0x265/0x620 net/ipv6/fib6_rules.c:116 [<ffffffff85618009>] ip6_route_output_flags_noref+0x2d9/0x3a0 net/ipv6/route.c:2638 [<ffffffff8561821a>] ip6_route_output_flags+0xca/0x340 net/ipv6/route.c:2651 [<ffffffff838bd5a3>] ip6_route_output include/net/ip6_route.h:100 [inline] [<ffffffff838bd5a3>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:473 [inline] [<ffffffff838bd5a3>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline] [<ffffffff838bd5a3>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] [<ffffffff838bd5a3>] ipvlan_queue_xmit+0xc33/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677 [<ffffffff838c2909>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229 [<ffffffff84d03900>] netdev_start_xmit include/linux/netdevice.h:4966 [inline] [<ffffffff84d03900>] xmit_one net/core/dev.c:3644 [inline] [<ffffffff84d03900>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660 [<ffffffff84d080e2>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff855ce4cd>] dev_queue_xmit include/linux/netdevice.h:3067 [inline] [<ffffffff855ce4cd>] neigh_hh_output include/net/neighbour.h:529 [inline] [<f ---truncated--- | 2024-05-21 | not yet calculated | CVE-2023-52796 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Check find_first_bit() return value We must check the return value of find_first_bit() before using the return value as an index array since it happens to overflow the array and then panic: [ 107.318430] Kernel BUG [#1] [ 107.319434] CPU: 3 PID: 1238 Comm: kill Tainted: G E 6.6.0-rc6ubuntu-defconfig #2 [ 107.319465] Hardware name: riscv-virtio,qemu (DT) [ 107.319551] epc : pmu_sbi_ovf_handler+0x3a4/0x3ae [ 107.319840] ra : pmu_sbi_ovf_handler+0x52/0x3ae [ 107.319868] epc : ffffffff80a0a77c ra : ffffffff80a0a42a sp : ffffaf83fecda350 [ 107.319884] gp : ffffffff823961a8 tp : ffffaf8083db1dc0 t0 : ffffaf83fecda480 [ 107.319899] t1 : ffffffff80cafe62 t2 : 000000000000ff00 s0 : ffffaf83fecda520 [ 107.319921] s1 : ffffaf83fecda380 a0 : 00000018fca29df0 a1 : ffffffffffffffff [ 107.319936] a2 : 0000000001073734 a3 : 0000000000000004 a4 : 0000000000000000 [ 107.319951] a5 : 0000000000000040 a6 : 000000001d1c8774 a7 : 0000000000504d55 [ 107.319965] s2 : ffffffff82451f10 s3 : ffffffff82724e70 s4 : 000000000000003f [ 107.319980] s5 : 0000000000000011 s6 : ffffaf8083db27c0 s7 : 0000000000000000 [ 107.319995] s8 : 0000000000000001 s9 : 00007fffb45d6558 s10: 00007fffb45d81a0 [ 107.320009] s11: ffffaf7ffff60000 t3 : 0000000000000004 t4 : 0000000000000000 [ 107.320023] t5 : ffffaf7f80000000 t6 : ffffaf8000000000 [ 107.320037] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 107.320081] [<ffffffff80a0a77c>] pmu_sbi_ovf_handler+0x3a4/0x3ae [ 107.320112] [<ffffffff800b42d0>] handle_percpu_devid_irq+0x9e/0x1a0 [ 107.320131] [<ffffffff800ad92c>] generic_handle_domain_irq+0x28/0x36 [ 107.320148] [<ffffffff8065f9f8>] riscv_intc_irq+0x36/0x4e [ 107.320166] [<ffffffff80caf4a0>] handle_riscv_irq+0x54/0x86 [ 107.320189] [<ffffffff80cb0036>] do_irq+0x64/0x96 [ 107.320271] Code: 85a6 855e b097 ff7f 80e7 9220 b709 9002 4501 bbd9 (9002) 6097 [ 107.320585] ---[ end trace 0000000000000000 ]--- [ 107.320704] Kernel panic - not syncing: Fatal exception in interrupt [ 107.320775] SMP: stopping secondary CPUs [ 107.321219] Kernel Offset: 0x0 from 0xffffffff80000000 [ 107.333051] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- | 2024-05-21 | not yet calculated | CVE-2023-52797 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix dfs radar event locking The ath11k active pdevs are protected by RCU but the DFS radar event handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. | 2024-05-21 | not yet calculated | CVE-2023-52798 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in dbFindLeaf Currently while searching for dmtree_t for sufficient free blocks there is an array out of bounds while getting element in tp->dm_stree. To add the required check for out of bound we first need to determine the type of dmtree. Thus added an extra parameter to dbFindLeaf so that the type of tree can be determined and the required check can be applied. | 2024-05-21 | not yet calculated | CVE-2023-52799 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix htt pktlog locking The ath11k active pdevs are protected by RCU but the htt pktlog handling code calling ath11k_mac_get_ar_by_pdev_id() was not marked as a read-side critical section. Mark the code in question as an RCU read-side critical section to avoid any potential use-after-free issues. Compile tested only. | 2024-05-21 | not yet calculated | CVE-2023-52800 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix missing update of domains_itree after splitting iopt_area In iopt_area_split(), if the original iopt_area has filled a domain and is linked to domains_itree, pages_nodes have to be properly reinserted. Otherwise the domains_itree becomes corrupted and we will UAF. | 2024-05-21 | not yet calculated | CVE-2023-52801 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix RPC client cleaned up the freed pipefs dentries RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir() workqueue,which takes care about pipefs superblock locking. In some special scenarios, when kernel frees the pipefs sb of the current client and immediately alloctes a new pipefs sb, rpc_remove_pipedir function would misjudge the existence of pipefs sb which is not the one it used to hold. As a result, the rpc_remove_pipedir would clean the released freed pipefs dentries. To fix this issue, rpc_remove_pipedir should check whether the current pipefs sb is consistent with the original pipefs sb. This error can be catched by KASAN: ========================================================= [ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200 [ 250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503 [ 250.500549] Workqueue: events rpc_free_client_work [ 250.501001] Call Trace: [ 250.502880] kasan_report+0xb6/0xf0 [ 250.503209] ? dget_parent+0x195/0x200 [ 250.503561] dget_parent+0x195/0x200 [ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10 [ 250.504384] rpc_rmdir_depopulate+0x1b/0x90 [ 250.504781] rpc_remove_client_dir+0xf5/0x150 [ 250.505195] rpc_free_client_work+0xe4/0x230 [ 250.505598] process_one_work+0x8ee/0x13b0 ... [ 22.039056] Allocated by task 244: [ 22.039390] kasan_save_stack+0x22/0x50 [ 22.039758] kasan_set_track+0x25/0x30 [ 22.040109] __kasan_slab_alloc+0x59/0x70 [ 22.040487] kmem_cache_alloc_lru+0xf0/0x240 [ 22.040889] __d_alloc+0x31/0x8e0 [ 22.041207] d_alloc+0x44/0x1f0 [ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140 [ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110 [ 22.042459] rpc_create_client_dir+0x34/0x150 [ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0 [ 22.043284] rpc_client_register+0x136/0x4e0 [ 22.043689] rpc_new_client+0x911/0x1020 [ 22.044057] rpc_create_xprt+0xcb/0x370 [ 22.044417] rpc_create+0x36b/0x6c0 ... [ 22.049524] Freed by task 0: [ 22.049803] kasan_save_stack+0x22/0x50 [ 22.050165] kasan_set_track+0x25/0x30 [ 22.050520] kasan_save_free_info+0x2b/0x50 [ 22.050921] __kasan_slab_free+0x10e/0x1a0 [ 22.051306] kmem_cache_free+0xa5/0x390 [ 22.051667] rcu_core+0x62c/0x1930 [ 22.051995] __do_softirq+0x165/0x52a [ 22.052347] [ 22.052503] Last potentially related work creation: [ 22.052952] kasan_save_stack+0x22/0x50 [ 22.053313] __kasan_record_aux_stack+0x8e/0xa0 [ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0 [ 22.054209] dentry_free+0xb2/0x140 [ 22.054540] __dentry_kill+0x3be/0x540 [ 22.054900] shrink_dentry_list+0x199/0x510 [ 22.055293] shrink_dcache_parent+0x190/0x240 [ 22.055703] do_one_tree+0x11/0x40 [ 22.056028] shrink_dcache_for_umount+0x61/0x140 [ 22.056461] generic_shutdown_super+0x70/0x590 [ 22.056879] kill_anon_super+0x3a/0x60 [ 22.057234] rpc_kill_sb+0x121/0x200 | 2024-05-21 | not yet calculated | CVE-2023-52803 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Add validity check for db_maxag and db_agpref Both db_maxag and db_agpref are used as the index of the db_agfree array, but there is currently no validity check for db_maxag and db_agpref, which can lead to errors. The following is related bug reported by Syzbot: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:639:20 index 7936 is out of range for type 'atomic_t[128]' Add checking that the values of db_maxag and db_agpref are valid indexes for the db_agfree array. | 2024-05-21 | not yet calculated | CVE-2023-52804 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds in diAlloc Currently there is not check against the agno of the iag while allocating new inodes to avoid fragmentation problem. Added the check which is required. | 2024-05-21 | not yet calculated | CVE-2023-52805 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix out-of-bounds access may occur when coalesce info is read via debugfs The hns3 driver define an array of string to show the coalesce info, but if the kernel adds a new mode or a new state, out-of-bounds access may occur when coalesce info is read via debugfs, this patch fix the problem. | 2024-05-21 | not yet calculated | CVE-2023-52807 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Set debugfs_dir pointer to NULL after removing debugfs If init debugfs failed during device registration due to memory allocation failure, debugfs_remove_recursive() is called, after which debugfs_dir is not set to NULL. debugfs_remove_recursive() will be called again during device removal. As a result, illegal pointer is accessed. [ 1665.467244] hisi_sas_v3_hw 0000:b4:02.0: failed to init debugfs! ... [ 1669.836708] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 1669.872669] pc : down_write+0x24/0x70 [ 1669.876315] lr : down_write+0x1c/0x70 [ 1669.879961] sp : ffff000036f53a30 [ 1669.883260] x29: ffff000036f53a30 x28: ffffa027c31549f8 [ 1669.888547] x27: ffffa027c3140000 x26: 0000000000000000 [ 1669.893834] x25: ffffa027bf37c270 x24: ffffa027bf37c270 [ 1669.899122] x23: ffff0000095406b8 x22: ffff0000095406a8 [ 1669.904408] x21: 0000000000000000 x20: ffffa027bf37c310 [ 1669.909695] x19: 00000000000000a0 x18: ffff8027dcd86f10 [ 1669.914982] x17: 0000000000000000 x16: 0000000000000000 [ 1669.920268] x15: 0000000000000000 x14: ffffa0274014f870 [ 1669.925555] x13: 0000000000000040 x12: 0000000000000228 [ 1669.930842] x11: 0000000000000020 x10: 0000000000000bb0 [ 1669.936129] x9 : ffff000036f537f0 x8 : ffff80273088ca10 [ 1669.941416] x7 : 000000000000001d x6 : 00000000ffffffff [ 1669.946702] x5 : ffff000008a36310 x4 : ffff80273088be00 [ 1669.951989] x3 : ffff000009513e90 x2 : 0000000000000000 [ 1669.957276] x1 : 00000000000000a0 x0 : ffffffff00000001 [ 1669.962563] Call trace: [ 1669.965000] down_write+0x24/0x70 [ 1669.968301] debugfs_remove_recursive+0x5c/0x1b0 [ 1669.972905] hisi_sas_debugfs_exit+0x24/0x30 [hisi_sas_main] [ 1669.978541] hisi_sas_v3_remove+0x130/0x150 [hisi_sas_v3_hw] [ 1669.984175] pci_device_remove+0x48/0xd8 [ 1669.988082] device_release_driver_internal+0x1b4/0x250 [ 1669.993282] device_release_driver+0x28/0x38 [ 1669.997534] pci_stop_bus_device+0x84/0xb8 [ 1670.001611] pci_stop_and_remove_bus_device_locked+0x24/0x40 [ 1670.007244] remove_store+0xfc/0x140 [ 1670.010802] dev_attr_store+0x44/0x60 [ 1670.014448] sysfs_kf_write+0x58/0x80 [ 1670.018095] kernfs_fop_write+0xe8/0x1f0 [ 1670.022000] __vfs_write+0x60/0x190 [ 1670.025472] vfs_write+0xac/0x1c0 [ 1670.028771] ksys_write+0x6c/0xd8 [ 1670.032071] __arm64_sys_write+0x24/0x30 [ 1670.035977] el0_svc_common+0x78/0x130 [ 1670.039710] el0_svc_handler+0x38/0x78 [ 1670.043442] el0_svc+0x8/0xc To fix this, set debugfs_dir to NULL after debugfs_remove_recursive(). | 2024-05-21 | not yet calculated | CVE-2023-52808 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: fs/jfs: Add check for negative db_l2nbperpage l2nbperpage is log2(number of blks per page), and the minimum legal value should be 0, not negative. In the case of l2nbperpage being negative, an error will occur when subsequently used as shift exponent. Syzbot reported this bug: UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:799:12 shift exponent -16777216 is negative | 2024-05-21 | not yet calculated | CVE-2023-52810 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Remove BUG_ON in the case of an empty event pool In practice the driver should never send more commands than are allocated to a queue's event pool. In the unlikely event that this happens, the code asserts a BUG_ON, and in the case that the kernel is not configured to crash on panic returns a junk event pointer from the empty event list causing things to spiral from there. This BUG_ON is a historical artifact of the ibmvfc driver first being upstreamed, and it is well known now that the use of BUG_ON is bad practice except in the most unrecoverable scenario. There is nothing about this scenario that prevents the driver from recovering and carrying on. Remove the BUG_ON in question from ibmvfc_get_event() and return a NULL pointer in the case of an empty event pool. Update all call sites to ibmvfc_get_event() to check for a NULL pointer and perfrom the appropriate failure or recovery action. | 2024-05-21 | not yet calculated | CVE-2023-52811 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd: check num of link levels when update pcie param In SR-IOV environment, the value of pcie_table->num_of_link_levels will be 0, and num_of_levels - 1 will cause array index out of bounds | 2024-05-21 | not yet calculated | CVE-2023-52812 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix hungtask for PADATA_RESET We found a hungtask bug in test_aead_vec_cfg as follows: INFO: task cryptomgr_test:391009 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Call trace: __switch_to+0x98/0xe0 __schedule+0x6c4/0xf40 schedule+0xd8/0x1b4 schedule_timeout+0x474/0x560 wait_for_common+0x368/0x4e0 wait_for_completion+0x20/0x30 wait_for_completion+0x20/0x30 test_aead_vec_cfg+0xab4/0xd50 test_aead+0x144/0x1f0 alg_test_aead+0xd8/0x1e0 alg_test+0x634/0x890 cryptomgr_test+0x40/0x70 kthread+0x1e0/0x220 ret_from_fork+0x10/0x18 Kernel panic - not syncing: hung_task: blocked tasks For padata_do_parallel, when the return err is 0 or -EBUSY, it will call wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal case, aead_request_complete() will be called in pcrypt_aead_serial and the return err is 0 for padata_do_parallel. But, when pinst->flags is PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it won't call aead_request_complete(). Therefore, test_aead_vec_cfg will hung at wait_for_completion(&wait->completion), which will cause hungtask. The problem comes as following: (padata_do_parallel) | rcu_read_lock_bh(); | err = -EINVAL; | (padata_replace) | pinst->flags |= PADATA_RESET; err = -EBUSY | if (pinst->flags & PADATA_RESET) | rcu_read_unlock_bh() | return err In order to resolve the problem, we replace the return err -EBUSY with -EAGAIN, which means parallel_data is changing, and the caller should call it again. v3: remove retry and just change the return err. v2: introduce padata_try_do_parallel() in pcrypt_aead_encrypt and pcrypt_aead_decrypt to solve the hungtask. | 2024-05-21 | not yet calculated | CVE-2023-52813 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix shift out-of-bounds issue [ 567.613292] shift exponent 255 is too large for 64-bit type 'long unsigned int' [ 567.614498] CPU: 5 PID: 238 Comm: kworker/5:1 Tainted: G OE 6.2.0-34-generic #34~22.04.1-Ubuntu [ 567.614502] Hardware name: AMD Splinter/Splinter-RPL, BIOS WS43927N_871 09/25/2023 [ 567.614504] Workqueue: events send_exception_work_handler [amdgpu] [ 567.614748] Call Trace: [ 567.614750] <TASK> [ 567.614753] dump_stack_lvl+0x48/0x70 [ 567.614761] dump_stack+0x10/0x20 [ 567.614763] __ubsan_handle_shift_out_of_bounds+0x156/0x310 [ 567.614769] ? srso_alias_return_thunk+0x5/0x7f [ 567.614773] ? update_sd_lb_stats.constprop.0+0xf2/0x3c0 [ 567.614780] svm_range_split_by_granularity.cold+0x2b/0x34 [amdgpu] [ 567.615047] ? srso_alias_return_thunk+0x5/0x7f [ 567.615052] svm_migrate_to_ram+0x185/0x4d0 [amdgpu] [ 567.615286] do_swap_page+0x7b6/0xa30 [ 567.615291] ? srso_alias_return_thunk+0x5/0x7f [ 567.615294] ? __free_pages+0x119/0x130 [ 567.615299] handle_pte_fault+0x227/0x280 [ 567.615303] __handle_mm_fault+0x3c0/0x720 [ 567.615311] handle_mm_fault+0x119/0x330 [ 567.615314] ? lock_mm_and_find_vma+0x44/0x250 [ 567.615318] do_user_addr_fault+0x1a9/0x640 [ 567.615323] exc_page_fault+0x81/0x1b0 [ 567.615328] asm_exc_page_fault+0x27/0x30 [ 567.615332] RIP: 0010:__get_user_8+0x1c/0x30 | 2024-05-21 | not yet calculated | CVE-2023-52816 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix UBSAN array-index-out-of-bounds for SMU7 For pptable structs that use flexible array sizes, use flexible arrays. | 2024-05-21 | not yet calculated | CVE-2023-52818 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix UBSAN array-index-out-of-bounds for Polaris and Tonga For pptable structs that use flexible array sizes, use flexible arrays. | 2024-05-21 | not yet calculated | CVE-2023-52819 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix a race condition of vram buffer unref in svm code prange->svm_bo unref can happen in both mmu callback and a callback after migrate to system ram. Both are async call in different tasks. Sync svm_bo unref operation to avoid random "use-after-free". | 2024-05-21 | not yet calculated | CVE-2023-52825 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/panel/panel-tpo-tpg110: fix a possible null pointer dereference In tpg110_get_modes(), the return value of drm_mode_duplicate() is assigned to mode, which will lead to a NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. | 2024-05-21 | not yet calculated | CVE-2023-52826 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bpf: Detect IP == ksym.end as part of BPF program Now that bpf_throw kfunc is the first such call instruction that has noreturn semantics within the verifier, this also kicks in dead code elimination in unprecedented ways. For one, any instruction following a bpf_throw call will never be marked as seen. Moreover, if a callchain ends up throwing, any instructions after the call instruction to the eventually throwing subprog in callers will also never be marked as seen. The tempting way to fix this would be to emit extra 'int3' instructions which bump the jited_len of a program, and ensure that during runtime when a program throws, we can discover its boundaries even if the call instruction to bpf_throw (or to subprogs that always throw) is emitted as the final instruction in the program. An example of such a program would be this: do_something(): ... r0 = 0 exit foo(): r1 = 0 call bpf_throw r0 = 0 exit bar(cond): if r1 != 0 goto pc+2 call do_something exit call foo r0 = 0 // Never seen by verifier exit // main(ctx): r1 = ... call bar r0 = 0 exit Here, if we do end up throwing, the stacktrace would be the following: bpf_throw foo bar main In bar, the final instruction emitted will be the call to foo, as such, the return address will be the subsequent instruction (which the JIT emits as int3 on x86). This will end up lying outside the jited_len of the program, thus, when unwinding, we will fail to discover the return address as belonging to any program and end up in a panic due to the unreliable stack unwinding of BPF programs that we never expect. To remedy this case, make bpf_prog_ksym_find treat IP == ksym.end as part of the BPF program, so that is_bpf_text_address returns true when such a case occurs, and we are able to unwind reliably when the final instruction ends up being a call instruction. | 2024-05-21 | not yet calculated | CVE-2023-52828 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix possible out-of-bound write in ath12k_wmi_ext_hal_reg_caps() reg_cap.phy_id is extracted from WMI event and could be an unexpected value in case some errors happen. As a result out-of-bound write may occur to soc->hal_reg_cap. Fix it by validating reg_cap.phy_id before using it. This is found during code review. Compile tested only. | 2024-05-21 | not yet calculated | CVE-2023-52829 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cpu/hotplug: Don't offline the last non-isolated CPU If a system has isolated CPUs via the "isolcpus=" command line parameter, then an attempt to offline the last housekeeping CPU will result in a WARN_ON() when rebuilding the scheduler domains and a subsequent panic due to and unhandled empty CPU mas in partition_sched_domains_locked(). cpuset_hotplug_workfn() rebuild_sched_domains_locked() ndoms = generate_sched_domains(&doms, &attr); cpumask_and(doms[0], top_cpuset.effective_cpus, housekeeping_cpumask(HK_FLAG_DOMAIN)); Thus results in an empty CPU mask which triggers the warning and then the subsequent crash: WARNING: CPU: 4 PID: 80 at kernel/sched/topology.c:2366 build_sched_domains+0x120c/0x1408 Call trace: build_sched_domains+0x120c/0x1408 partition_sched_domains_locked+0x234/0x880 rebuild_sched_domains_locked+0x37c/0x798 rebuild_sched_domains+0x30/0x58 cpuset_hotplug_workfn+0x2a8/0x930 Unable to handle kernel paging request at virtual address fffe80027ab37080 partition_sched_domains_locked+0x318/0x880 rebuild_sched_domains_locked+0x37c/0x798 Aside of the resulting crash, it does not make any sense to offline the last last housekeeping CPU. Prevent this by masking out the non-housekeeping CPUs when selecting a target CPU for initiating the CPU unplug operation via the work queue. | 2024-05-21 | not yet calculated | CVE-2023-52831 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't return unset power in ieee80211_get_tx_power() We can get a UBSAN warning if ieee80211_get_tx_power() returns the INT_MIN value mac80211 internally uses for "unset power level". UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5 -2147483648 * 100 cannot be represented in type 'int' CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE Call Trace: dump_stack+0x74/0x92 ubsan_epilogue+0x9/0x50 handle_overflow+0x8d/0xd0 __ubsan_handle_mul_overflow+0xe/0x10 nl80211_send_iface+0x688/0x6b0 [cfg80211] [...] cfg80211_register_wdev+0x78/0xb0 [cfg80211] cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211] [...] ieee80211_if_add+0x60e/0x8f0 [mac80211] ieee80211_register_hw+0xda5/0x1170 [mac80211] In this case, simply return an error instead, to indicate that no data is available. | 2024-05-21 | not yet calculated | CVE-2023-52832 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Add date->evt_skb is NULL check fix crash because of null pointers [ 6104.969662] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 6104.969667] #PF: supervisor read access in kernel mode [ 6104.969668] #PF: error_code(0x0000) - not-present page [ 6104.969670] PGD 0 P4D 0 [ 6104.969673] Oops: 0000 [#1] SMP NOPTI [ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb] [ 6104.969688] RSP: 0018:ffffb8d681533d48 EFLAGS: 00010246 [ 6104.969689] RAX: 0000000000000000 RBX: ffff8ad560bb2000 RCX: 0000000000000006 [ 6104.969691] RDX: 0000000000000000 RSI: ffffb8d681533d08 RDI: 0000000000000000 [ 6104.969692] RBP: ffffb8d681533d70 R08: 0000000000000001 R09: 0000000000000001 [ 6104.969694] R10: 0000000000000001 R11: 00000000fa83b2da R12: ffff8ad461d1d7c0 [ 6104.969695] R13: 0000000000000000 R14: ffff8ad459618c18 R15: ffffb8d681533d90 [ 6104.969697] FS: 00007f5a1cab9d40(0000) GS:ffff8ad578200000(0000) knlGS:00000 [ 6104.969699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6104.969700] CR2: 00000000000000c8 CR3: 000000018620c001 CR4: 0000000000760ef0 [ 6104.969701] PKRU: 55555554 [ 6104.969702] Call Trace: [ 6104.969708] btusb_mtk_shutdown+0x44/0x80 [btusb] [ 6104.969732] hci_dev_do_close+0x470/0x5c0 [bluetooth] [ 6104.969748] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 6104.969753] rfkill_set_block+0x92/0x160 [ 6104.969755] rfkill_fop_write+0x136/0x1e0 [ 6104.969759] __vfs_write+0x18/0x40 [ 6104.969761] vfs_write+0xdf/0x1c0 [ 6104.969763] ksys_write+0xb1/0xe0 [ 6104.969765] __x64_sys_write+0x1a/0x20 [ 6104.969769] do_syscall_64+0x51/0x180 [ 6104.969771] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 6104.969773] RIP: 0033:0x7f5a21f18fef [ 6104.9] RSP: 002b:00007ffeefe39010 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 6104.969780] RAX: ffffffffffffffda RBX: 000055c10a7560a0 RCX: 00007f5a21f18fef [ 6104.969781] RDX: 0000000000000008 RSI: 00007ffeefe39060 RDI: 0000000000000012 [ 6104.969782] RBP: 00007ffeefe39060 R08: 0000000000000000 R09: 0000000000000017 [ 6104.969784] R10: 00007ffeefe38d97 R11: 0000000000000293 R12: 0000000000000002 [ 6104.969785] R13: 00007ffeefe39220 R14: 00007ffeefe391a0 R15: 000055c10a72acf0 | 2024-05-21 | not yet calculated | CVE-2023-52833 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: atl1c: Work around the DMA RX overflow issue This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540. | 2024-05-21 | not yet calculated | CVE-2023-52834 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: perf/core: Bail out early if the request AUX area is out of bound When perf-record with a large AUX area, e.g 4GB, it fails with: #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1 failed to mmap with 12 (Cannot allocate memory) and it reveals a WARNING with __alloc_pages(): ------------[ cut here ]------------ WARNING: CPU: 44 PID: 17573 at mm/page_alloc.c:5568 __alloc_pages+0x1ec/0x248 Call trace: __alloc_pages+0x1ec/0x248 __kmalloc_large_node+0xc0/0x1f8 __kmalloc_node+0x134/0x1e8 rb_alloc_aux+0xe0/0x298 perf_mmap+0x440/0x660 mmap_region+0x308/0x8a8 do_mmap+0x3c0/0x528 vm_mmap_pgoff+0xf4/0x1b8 ksys_mmap_pgoff+0x18c/0x218 __arm64_sys_mmap+0x38/0x58 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x58/0x188 do_el0_svc+0x34/0x50 el0_svc+0x34/0x108 el0t_64_sync_handler+0xb8/0xc0 el0t_64_sync+0x1a4/0x1a8 'rb->aux_pages' allocated by kcalloc() is a pointer array which is used to maintains AUX trace pages. The allocated page for this array is physically contiguous (and virtually contiguous) with an order of 0..MAX_ORDER. If the size of pointer array crosses the limitation set by MAX_ORDER, it reveals a WARNING. So bail out early with -ENOMEM if the request AUX area is out of bound, e.g.: #perf record -C 0 -m ,4G -e arm_spe_0// -- sleep 1 failed to mmap with 12 (Cannot allocate memory) | 2024-05-21 | not yet calculated | CVE-2023-52835 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: locking/ww_mutex/test: Fix potential workqueue corruption In some cases running with the test-ww_mutex code, I was seeing odd behavior where sometimes it seemed flush_workqueue was returning before all the work threads were finished. Often this would cause strange crashes as the mutexes would be freed while they were being used. Looking at the code, there is a lifetime problem as the controlling thread that spawns the work allocates the "struct stress" structures that are passed to the workqueue threads. Then when the workqueue threads are finished, they free the stress struct that was passed to them. Unfortunately the workqueue work_struct node is in the stress struct. Which means the work_struct is freed before the work thread returns and while flush_workqueue is waiting. It seems like a better idea to have the controlling thread both allocate and free the stress structures, so that we can be sure we don't corrupt the workqueue by freeing the structure prematurely. So this patch reworks the test to do so, and with this change I no longer see the early flush_workqueue returns. | 2024-05-21 | not yet calculated | CVE-2023-52836 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: nbd: fix uaf in nbd_open Commit 4af5f2e03013 ("nbd: use blk_mq_alloc_disk and blk_cleanup_disk") cleans up disk by blk_cleanup_disk() and it won't set disk->private_data as NULL as before. UAF may be triggered in nbd_open() if someone tries to open nbd device right after nbd_put() since nbd has been free in nbd_dev_remove(). Fix this by implementing ->free_disk and free private data in it. | 2024-05-21 | not yet calculated | CVE-2023-52837 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: fbdev: imsttfb: fix a resource leak in probe I've re-written the error handling but the bug is that if init_imstt() fails we need to call iounmap(par->cmap_regs). | 2024-05-21 | not yet calculated | CVE-2023-52838 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drivers: perf: Do not broadcast to other cpus when starting a counter This command: $ perf record -e cycles:k -e instructions:k -c 10000 -m 64M dd if=/dev/zero of=/dev/null count=1000 gives rise to this kernel warning: [ 444.364395] WARNING: CPU: 0 PID: 104 at kernel/smp.c:775 smp_call_function_many_cond+0x42c/0x436 [ 444.364515] Modules linked in: [ 444.364657] CPU: 0 PID: 104 Comm: perf-exec Not tainted 6.6.0-rc6-00051-g391df82e8ec3-dirty #73 [ 444.364771] Hardware name: riscv-virtio,qemu (DT) [ 444.364868] epc : smp_call_function_many_cond+0x42c/0x436 [ 444.364917] ra : on_each_cpu_cond_mask+0x20/0x32 [ 444.364948] epc : ffffffff8009f9e0 ra : ffffffff8009fa5a sp : ff20000000003800 [ 444.364966] gp : ffffffff81500aa0 tp : ff60000002b83000 t0 : ff200000000038c0 [ 444.364982] t1 : ffffffff815021f0 t2 : 000000000000001f s0 : ff200000000038b0 [ 444.364998] s1 : ff60000002c54d98 a0 : ff60000002a73940 a1 : 0000000000000000 [ 444.365013] a2 : 0000000000000000 a3 : 0000000000000003 a4 : 0000000000000100 [ 444.365029] a5 : 0000000000010100 a6 : 0000000000f00000 a7 : 0000000000000000 [ 444.365044] s2 : 0000000000000000 s3 : ffffffffffffffff s4 : ff60000002c54d98 [ 444.365060] s5 : ffffffff81539610 s6 : ffffffff80c20c48 s7 : 0000000000000000 [ 444.365075] s8 : 0000000000000000 s9 : 0000000000000001 s10: 0000000000000001 [ 444.365090] s11: ffffffff80099394 t3 : 0000000000000003 t4 : 00000000eac0c6e6 [ 444.365104] t5 : 0000000400000000 t6 : ff60000002e010d0 [ 444.365120] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 444.365226] [<ffffffff8009f9e0>] smp_call_function_many_cond+0x42c/0x436 [ 444.365295] [<ffffffff8009fa5a>] on_each_cpu_cond_mask+0x20/0x32 [ 444.365311] [<ffffffff806e90dc>] pmu_sbi_ctr_start+0x7a/0xaa [ 444.365327] [<ffffffff806e880c>] riscv_pmu_start+0x48/0x66 [ 444.365339] [<ffffffff8012111a>] perf_adjust_freq_unthr_context+0x196/0x1ac [ 444.365356] [<ffffffff801237aa>] perf_event_task_tick+0x78/0x8c [ 444.365368] [<ffffffff8003faf4>] scheduler_tick+0xe6/0x25e [ 444.365383] [<ffffffff8008a042>] update_process_times+0x80/0x96 [ 444.365398] [<ffffffff800991ec>] tick_sched_handle+0x26/0x52 [ 444.365410] [<ffffffff800993e4>] tick_sched_timer+0x50/0x98 [ 444.365422] [<ffffffff8008a6aa>] __hrtimer_run_queues+0x126/0x18a [ 444.365433] [<ffffffff8008b350>] hrtimer_interrupt+0xce/0x1da [ 444.365444] [<ffffffff806cdc60>] riscv_timer_interrupt+0x30/0x3a [ 444.365457] [<ffffffff8006afa6>] handle_percpu_devid_irq+0x80/0x114 [ 444.365470] [<ffffffff80065b82>] generic_handle_domain_irq+0x1c/0x2a [ 444.365483] [<ffffffff8045faec>] riscv_intc_irq+0x2e/0x46 [ 444.365497] [<ffffffff808a9c62>] handle_riscv_irq+0x4a/0x74 [ 444.365521] [<ffffffff808aa760>] do_irq+0x7c/0x7e [ 444.365796] ---[ end trace 0000000000000000 ]--- That's because the fix in commit 3fec323339a4 ("drivers: perf: Fix panic in riscv SBI mmap support") was wrong since there is no need to broadcast to other cpus when starting a counter, that's only needed in mmap when the counters could have already been started on other cpus, so simply remove this broadcast. | 2024-05-21 | not yet calculated | CVE-2023-52839 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix use after free in rmi_unregister_function() The put_device() calls rmi_release_function() which frees "fn" so the dereference on the next line "fn->num_of_irqs" is a use after free. Move the put_device() to the end to fix this. | 2024-05-21 | not yet calculated | CVE-2023-52840 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: vidtv: mux: Add check and kfree for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. Moreover, use kfree() in the later error handling in order to avoid memory leak. | 2024-05-21 | not yet calculated | CVE-2023-52841 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt() KMSAN reported the following uninit-value access issue: ===================================================== BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was stored to memory at: virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline] virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 Uninit was created at: slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline] virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58 virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline] virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120 process_one_work kernel/workqueue.c:2630 [inline] process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784 kthread+0x3cc/0x520 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef746f #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: vsock-loopback vsock_loopback_work ===================================================== The following simple reproducer can cause the issue described above: int main(void) { int sock; struct sockaddr_vm addr = { .svm_family = AF_VSOCK, .svm_cid = VMADDR_CID_ANY, .svm_port = 1234, }; sock = socket(AF_VSOCK, SOCK_STREAM, 0); connect(sock, (struct sockaddr *)&addr, sizeof(addr)); return 0; } This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the `struct virtio_vsock_hdr` are not initialized when a new skb is allocated in `virtio_transport_init_hdr()`. This patch resolves the issue by initializing these fields during allocation. | 2024-05-21 | not yet calculated | CVE-2023-52842 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: llc: verify mac len before reading mac header LLC reads the mac header with eth_hdr without verifying that the skb has an Ethernet header. Syzbot was able to enter llc_rcv on a tun device. Tun can insert packets without mac len and with user configurable skb->protocol (passing a tun_pi header when not configuring IFF_NO_PI). BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002 Add a mac_len test before all three eth_hdr(skb) calls under net/llc. There are further uses in include/net/llc_pdu.h. All these are protected by a test skb->protocol == ETH_P_802_2. Which does not protect against this tun scenario. But the mac_len test added in this patch in llc_fixup_skb will indirectly protect those too. That is called from llc_rcv before any other LLC code. It is tempting to just add a blanket mac_len check in llc_rcv, but not sure whether that could break valid LLC paths that do not assume an Ethernet header. 802.2 LLC may be used on top of non-802.3 protocols in principle. The below referenced commit shows that used to, on top of Token Ring. At least one of the three eth_hdr uses goes back to before the start of git history. But the one that syzbot exercises is introduced in this commit. That commit is old enough (2008), that effectively all stable kernels should receive this. | 2024-05-21 | not yet calculated | CVE-2023-52843 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: vidtv: psi: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. | 2024-05-21 | not yet calculated | CVE-2023-52844 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tipc: Change nla_policy for bearer-related names to NLA_NUL_STRING syzbot reported the following uninit-value access issue [1]: ===================================================== BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline] BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756 strlen lib/string.c:418 [inline] strstr+0xb8/0x2f0 lib/string.c:756 tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595 genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline] genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline] genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545 genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595 __sys_sendmsg net/socket.c:2624 [inline] __do_sys_sendmsg net/socket.c:2633 [inline] __se_sys_sendmsg net/socket.c:2631 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:650 alloc_skb include/linux/skbuff.h:1286 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline] netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595 __sys_sendmsg net/socket.c:2624 [inline] __do_sys_sendmsg net/socket.c:2633 [inline] __se_sys_sendmsg net/socket.c:2631 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd TIPC bearer-related names including link names must be null-terminated strings. If a link name which is not null-terminated is passed through netlink, strstr() and similar functions can cause buffer overrun. This causes the above issue. This patch changes the nla_policy for bearer-related names from NLA_STRING to NLA_NUL_STRING. This resolves the issue by ensuring that only null-terminated strings are accepted as bearer-related names. syzbot reported similar uninit-value issue related to bearer names [2]. The root cause of this issue is that a non-null-terminated bearer name was passed. This patch also resolved this issue. | 2024-05-21 | not yet calculated | CVE-2023-52845 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: hsr: Prevent use after free in prp_create_tagged_frame() The prp_fill_rct() function can fail. In that situation, it frees the skb and returns NULL. Meanwhile on the success path, it returns the original skb. So it's straight forward to fix bug by using the returned value. | 2024-05-21 | not yet calculated | CVE-2023-52846 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: bttv: fix use after free error due to btv->timeout timer There may be some a race condition between timer function bttv_irq_timeout and bttv_remove. The timer is setup in probe and there is no timer_delete operation in remove function. When it hit kfree btv, the function might still be invoked, which will cause use after free bug. This bug is found by static analysis, it may be false positive. Fix it by adding del_timer_sync invoking to the remove function. cpu0 cpu1 bttv_probe ->timer_setup ->bttv_set_dma ->mod_timer; bttv_remove ->kfree(btv); ->bttv_irq_timeout ->USE btv | 2024-05-21 | not yet calculated | CVE-2023-52847 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to drop meta_inode's page cache in f2fs_put_super() syzbot reports a kernel bug as below: F2FS-fs (loop1): detect filesystem reference count leak during umount, type: 10, count: 1 kernel BUG at fs/f2fs/super.c:1639! CPU: 0 PID: 15451 Comm: syz-executor.1 Not tainted 6.5.0-syzkaller-09338-ge0152e7481c6 #0 RIP: 0010:f2fs_put_super+0xce1/0xed0 fs/f2fs/super.c:1639 Call Trace: generic_shutdown_super+0x161/0x3c0 fs/super.c:693 kill_block_super+0x3b/0x70 fs/super.c:1646 kill_f2fs_super+0x2b7/0x3d0 fs/f2fs/super.c:4879 deactivate_locked_super+0x9a/0x170 fs/super.c:481 deactivate_super+0xde/0x100 fs/super.c:514 cleanup_mnt+0x222/0x3d0 fs/namespace.c:1254 task_work_run+0x14d/0x240 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x210/0x240 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x60 kernel/entry/common.c:296 do_syscall_64+0x44/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd In f2fs_put_super(), it tries to do sanity check on dirty and IO reference count of f2fs, once there is any reference count leak, it will trigger panic. The root case is, during f2fs_put_super(), if there is any IO error in f2fs_wait_on_all_pages(), we missed to truncate meta_inode's page cache later, result in panic, fix this case. | 2024-05-21 | not yet calculated | CVE-2023-52848 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cxl/mem: Fix shutdown order Ira reports that removing cxl_mock_mem causes a crash with the following trace: BUG: kernel NULL pointer dereference, address: 0000000000000044 [..] RIP: 0010:cxl_region_decode_reset+0x7f/0x180 [cxl_core] [..] Call Trace: <TASK> cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x29/0x40 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 bus_remove_device+0xd7/0x150 device_del+0x155/0x3e0 device_unregister+0x13/0x60 devm_release_action+0x4d/0x90 ? __pfx_unregister_port+0x10/0x10 [cxl_core] delete_endpoint+0x121/0x130 [cxl_core] devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1d2/0x210 bus_remove_device+0xd7/0x150 device_del+0x155/0x3e0 ? lock_release+0x142/0x290 cdev_device_del+0x15/0x50 cxl_memdev_unregister+0x54/0x70 [cxl_core] This crash is due to the clearing out the cxl_memdev's driver context (@cxlds) before the subsystem is done with it. This is ultimately due to the region(s), that this memdev is a member, being torn down and expecting to be able to de-reference @cxlds, like here: static int cxl_region_decode_reset(struct cxl_region *cxlr, int count) ... if (cxlds->rcd) goto endpoint_reset; ... Fix it by keeping the driver context valid until memdev-device unregistration, and subsequently the entire stack of related dependencies, unwinds. | 2024-05-21 | not yet calculated | CVE-2023-52849 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: hantro: Check whether reset op is defined before use The i.MX8MM/N/P does not define the .reset op since reset of the VPU is done by genpd. Check whether the .reset op is defined before calling it to avoid NULL pointer dereference. Note that the Fixes tag is set to the commit which removed the reset op from i.MX8M Hantro G2 implementation, this is because before this commit all the implementations did define the .reset op. | 2024-05-21 | not yet calculated | CVE-2023-52850 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF In the unlikely event that workqueue allocation fails and returns NULL in mlx5_mkey_cache_init(), delete the call to mlx5r_umr_resource_cleanup() (which frees the QP) in mlx5_ib_stage_post_ib_reg_umr_init(). This will avoid attempted double free of the same QP when __mlx5_ib_add() does its cleanup. Resolves a splat: Syzkaller reported a UAF in ib_destroy_qp_user workqueue: Failed to create a rescuer kthread for wq "mkey_cache": -EINTR infiniband mlx5_0: mlx5_mkey_cache_init:981:(pid 1642): failed to create work queue infiniband mlx5_0: mlx5_ib_stage_post_ib_reg_umr_init:4075:(pid 1642): mr cache init failed -12 ================================================================== BUG: KASAN: slab-use-after-free in ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073) Read of size 8 at addr ffff88810da310a8 by task repro_upstream/1642 Call Trace: <TASK> kasan_report (mm/kasan/report.c:590) ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073) mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198) __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4178) mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402) ... </TASK> Allocated by task 1642: __kmalloc (./include/linux/kasan.h:198 mm/slab_common.c:1026 mm/slab_common.c:1039) create_qp (./include/linux/slab.h:603 ./include/linux/slab.h:720 ./include/rdma/ib_verbs.h:2795 drivers/infiniband/core/verbs.c:1209) ib_create_qp_kernel (drivers/infiniband/core/verbs.c:1347) mlx5r_umr_resource_init (drivers/infiniband/hw/mlx5/umr.c:164) mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4070) __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168) mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402) ... Freed by task 1642: __kmem_cache_free (mm/slub.c:1826 mm/slub.c:3809 mm/slub.c:3822) ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2112) mlx5r_umr_resource_cleanup (drivers/infiniband/hw/mlx5/umr.c:198) mlx5_ib_stage_post_ib_reg_umr_init (drivers/infiniband/hw/mlx5/main.c:4076 drivers/infiniband/hw/mlx5/main.c:4065) __mlx5_ib_add (drivers/infiniband/hw/mlx5/main.c:4168) mlx5r_probe (drivers/infiniband/hw/mlx5/main.c:4402) ... | 2024-05-21 | not yet calculated | CVE-2023-52851 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to avoid use-after-free on dic Call trace: __memcpy+0x128/0x250 f2fs_read_multi_pages+0x940/0xf7c f2fs_mpage_readpages+0x5a8/0x624 f2fs_readahead+0x5c/0x110 page_cache_ra_unbounded+0x1b8/0x590 do_sync_mmap_readahead+0x1dc/0x2e4 filemap_fault+0x254/0xa8c f2fs_filemap_fault+0x2c/0x104 __do_fault+0x7c/0x238 do_handle_mm_fault+0x11bc/0x2d14 do_mem_abort+0x3a8/0x1004 el0_da+0x3c/0xa0 el0t_64_sync_handler+0xc4/0xec el0t_64_sync+0x1b4/0x1b8 In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if we hit cached page in compress_inode's cache, dic may be released, it needs break the loop rather than continuing it, in order to avoid accessing invalid dic pointer. | 2024-05-21 | not yet calculated | CVE-2023-52852 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: hid: cp2112: Fix duplicate workqueue initialization Previously the cp2112 driver called INIT_DELAYED_WORK within cp2112_gpio_irq_startup, resulting in duplicate initilizations of the workqueue on subsequent IRQ startups following an initial request. This resulted in a warning in set_work_data in workqueue.c, as well as a rare NULL dereference within process_one_work in workqueue.c. Initialize the workqueue within _probe instead. | 2024-05-21 | not yet calculated | CVE-2023-52853 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: padata: Fix refcnt handling in padata_free_shell() In a high-load arm64 environment, the pcrypt_aead01 test in LTP can lead to system UAF (Use-After-Free) issues. Due to the lengthy analysis of the pcrypt_aead01 function call, I'll describe the problem scenario using a simplified model: Suppose there's a user of padata named `user_function` that adheres to the padata requirement of calling `padata_free_shell` after `serial()` has been invoked, as demonstrated in the following code: ```c struct request { struct padata_priv padata; struct completion *done; }; void parallel(struct padata_priv *padata) { do_something(); } void serial(struct padata_priv *padata) { struct request *request = container_of(padata, struct request, padata); complete(request->done); } void user_function() { DECLARE_COMPLETION(done) padata->parallel = parallel; padata->serial = serial; padata_do_parallel(); wait_for_completion(&done); padata_free_shell(); } ``` In the corresponding padata.c file, there's the following code: ```c static void padata_serial_worker(struct work_struct *serial_work) { ... cnt = 0; while (!list_empty(&local_list)) { ... padata->serial(padata); cnt++; } local_bh_enable(); if (refcount_sub_and_test(cnt, &pd->refcnt)) padata_free_pd(pd); } ``` Because of the high system load and the accumulation of unexecuted softirq at this moment, `local_bh_enable()` in padata takes longer to execute than usual. Subsequently, when accessing `pd->refcnt`, `pd` has already been released by `padata_free_shell()`, resulting in a UAF issue with `pd->refcnt`. The fix is straightforward: add `refcount_dec_and_test` before calling `padata_free_pd` in `padata_free_shell`. | 2024-05-21 | not yet calculated | CVE-2023-52854 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix possible NULL pointer dereference caused by driver concurrency In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue(): spin_lock_irqsave(&hsotg->lock, flags); ... if (!urb->hcpriv) { dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); goto out; } rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv ... out: spin_unlock_irqrestore(&hsotg->lock, flags); When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are concurrently executed, the NULL check of "urb->hcpriv" can be executed before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL pointer dereference. This possible bug is found by an experimental static analysis tool developed by myself. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported, when my tool analyzes the source code of Linux 6.5. To fix this possible bug, "urb->hcpriv = NULL" should be executed with holding the lock "hsotg->lock". After using this patch, my tool never reports the possible bug, with the kernelconfiguration allyesconfig for x86_64. Because I have no associated hardware, I cannot test the patch in runtime testing, and just verify it according to the code logic. | 2024-05-21 | not yet calculated | CVE-2023-52855 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/bridge: lt8912b: Fix crash on bridge detach The lt8912b driver, in its bridge detach function, calls drm_connector_unregister() and drm_connector_cleanup(). drm_connector_unregister() should be called only for connectors explicitly registered with drm_connector_register(), which is not the case in lt8912b. The driver's drm_connector_funcs.destroy hook is set to drm_connector_cleanup(). Thus the driver should not call either drm_connector_unregister() nor drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a crash on bridge detach: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000000858f3000 [0000000000000000] pgd=0800000085918003, p4d=0800000085918003, pud=0800000085431003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: tidss(-) display_connector lontium_lt8912b tc358768 panel_lvds panel_simple drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks CPU: 3 PID: 462 Comm: rmmod Tainted: G W 6.5.0-rc2+ #2 Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_connector_cleanup+0x78/0x2d4 [drm] lr : lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] sp : ffff800082ed3a90 x29: ffff800082ed3a90 x28: ffff0000040c1940 x27: 0000000000000000 x26: 0000000000000000 x25: dead000000000122 x24: dead000000000122 x23: dead000000000100 x22: ffff000003fb6388 x21: 0000000000000000 x20: 0000000000000000 x19: ffff000003fb6260 x18: fffffffffffe56e8 x17: 0000000000000000 x16: 0010000000000000 x15: 0000000000000038 x14: 0000000000000000 x13: ffff800081914b48 x12: 000000000000040e x11: 000000000000015a x10: ffff80008196ebb8 x9 : ffff800081914b48 x8 : 00000000ffffefff x7 : ffff0000040c1940 x6 : ffff80007aa649d0 x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff80008159e008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: drm_connector_cleanup+0x78/0x2d4 [drm] lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] drm_bridge_detach+0x44/0x84 [drm] drm_encoder_cleanup+0x40/0xb8 [drm] drmm_encoder_alloc_release+0x1c/0x30 [drm] drm_managed_release+0xac/0x148 [drm] drm_dev_put.part.0+0x88/0xb8 [drm] devm_drm_dev_init_release+0x14/0x24 [drm] devm_action_release+0x14/0x20 release_nodes+0x5c/0x90 devres_release_all+0x8c/0xe0 device_unbind_cleanup+0x18/0x68 device_release_driver_internal+0x208/0x23c driver_detach+0x4c/0x94 bus_remove_driver+0x70/0xf4 driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 tidss_platform_driver_exit+0x18/0xb2c [tidss] __arm64_sys_delete_module+0x1a0/0x2b4 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x60/0x10c do_el0_svc_compat+0x1c/0x40 el0_svc_compat+0x40/0xac el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 Code: 9104a276 f2fbd5b7 aa0203e1 91008af8 (f85c0420) | 2024-05-21 | not yet calculated | CVE-2023-52856 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix coverity issue with unintentional integer overflow 1. Instead of multiplying 2 variable of different types. Change to assign a value of one variable and then multiply the other variable. 2. Add a int variable for multiplier calculation instead of calculating different types multiplier with dma_addr_t variable directly. | 2024-05-21 | not yet calculated | CVE-2023-52857 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. | 2024-05-21 | not yet calculated | CVE-2023-52858 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: perf: hisi: Fix use-after-free when register pmu fails When we fail to register the uncore pmu, the pmu context may not been allocated. The error handing will call cpuhp_state_remove_instance() to call uncore pmu offline callback, which migrate the pmu context. Since that's liable to lead to some kind of use-after-free. Use cpuhp_state_remove_instance_nocalls() instead of cpuhp_state_remove_instance() so that the notifiers don't execute after the PMU device has been failed to register. | 2024-05-21 | not yet calculated | CVE-2023-52859 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process When tearing down a 'hisi_hns3' PMU, we mistakenly run the CPU hotplug callbacks after the device has been unregistered, leading to fireworks when we try to execute empty function callbacks within the driver: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | CPU: 0 PID: 15 Comm: cpuhp/0 Tainted: G W O 5.12.0-rc4+ #1 | Hardware name: , BIOS KpxxxFPGA 1P B600 V143 04/22/2021 | pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) | pc : perf_pmu_migrate_context+0x98/0x38c | lr : perf_pmu_migrate_context+0x94/0x38c | | Call trace: | perf_pmu_migrate_context+0x98/0x38c | hisi_hns3_pmu_offline_cpu+0x104/0x12c [hisi_hns3_pmu] Use cpuhp_state_remove_instance_nocalls() instead of cpuhp_state_remove_instance() so that the notifiers don't execute after the PMU device has been unregistered. [will: Rewrote commit message] | 2024-05-21 | not yet calculated | CVE-2023-52860 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm: bridge: it66121: Fix invalid connector dereference Fix the NULL pointer dereference when no monitor is connected, and the sound card is opened from userspace. Instead return an empty buffer (of zeroes) as the EDID information to the sound framework if there is no connector attached. | 2024-05-21 | not yet calculated | CVE-2023-52861 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null pointer dereference in error message This patch fixes a null pointer dereference in the error message that is printed when the Display Core (DC) fails to initialize. The original message includes the DC version number, which is undefined if the DC is not initialized. | 2024-05-21 | not yet calculated | CVE-2023-52862 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: hwmon: (axi-fan-control) Fix possible NULL pointer dereference axi_fan_control_irq_handler(), dependent on the private axi_fan_control_data structure, might be called before the hwmon device is registered. That will cause an "Unable to handle kernel NULL pointer dereference" error. | 2024-05-21 | not yet calculated | CVE-2023-52863 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: platform/x86: wmi: Fix opening of char device Since commit fa1f68db6ca7 ("drivers: misc: pass miscdevice pointer via file private data"), the miscdevice stores a pointer to itself inside filp->private_data, which means that private_data will not be NULL when wmi_char_open() is called. This might cause memory corruption should wmi_char_open() be unable to find its driver, something which can happen when the associated WMI device is deleted in wmi_free_devices(). Fix the problem by using the miscdevice pointer to retrieve the WMI device data associated with a char device using container_of(). This also avoids wmi_char_open() picking a wrong WMI device bound to a driver with the same name as the original driver. | 2024-05-21 | not yet calculated | CVE-2023-52864 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6797: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. | 2024-05-21 | not yet calculated | CVE-2023-52865 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: Fix user-memory-access bug in uclogic_params_ugee_v2_init_event_hooks() When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and then the below user-memory-access bug occurs. In hid_test_uclogic_params_cleanup_event_hooks(),it call uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata() will access hdev->dev with hdev=NULL, which will cause below user-memory-access. So add a fake_device with quirks member and call hid_set_drvdata() to assign hdev->dev->driver_data which avoids the null-ptr-def bug for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying this patch, the below user-memory-access bug never occurs. general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f] CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 ? sched_clock_cpu+0x69/0x550 ? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70 ? load_balance+0x2950/0x2950 ? rcu_trc_cmpxchg_need_qs+0x67/0xa0 hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0 ? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600 ? __switch_to+0x5cf/0xe60 ? migrate_enable+0x260/0x260 ? __kthread_parkme+0x83/0x150 ? kunit_try_run_case_cleanup+0xe0/0xe0 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b5/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ---truncated--- | 2024-05-21 | not yet calculated | CVE-2023-52866 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/radeon: possible buffer overflow Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is checked after access. | 2024-05-21 | not yet calculated | CVE-2023-52867 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: thermal: core: prevent potential string overflow The dev->id value comes from ida_alloc() so it's a number between zero and INT_MAX. If it's too high then these sprintf()s will overflow. | 2024-05-21 | not yet calculated | CVE-2023-52868 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: pstore/platform: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. | 2024-05-21 | not yet calculated | CVE-2023-52869 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6765: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. | 2024-05-21 | not yet calculated | CVE-2023-52870 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: soc: qcom: llcc: Handle a second device without data corruption Usually there is only one llcc device. But if there were a second, even a failed probe call would modify the global drv_data pointer. So check if drv_data is valid before overwriting it. | 2024-05-21 | not yet calculated | CVE-2023-52871 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix race condition in status line change on dead connections gsm_cleanup_mux() cleans up the gsm by closing all DLCIs, stopping all timers, removing the virtual tty devices and clearing the data queues. This procedure, however, may cause subsequent changes of the virtual modem status lines of a DLCI. More data is being added the outgoing data queue and the deleted kick timer is restarted to handle this. At this point many resources have already been removed by the cleanup procedure. Thus, a kernel panic occurs. Fix this by proving in gsm_modem_update() that the cleanup procedure has not been started and the mux is still alive. Note that writing to a virtual tty is already protected by checks against the DLCI specific connection state. | 2024-05-21 | not yet calculated | CVE-2023-52872 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt6779: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. | 2024-05-21 | not yet calculated | CVE-2023-52873 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro In the TDX_HYPERCALL asm, after the TDCALL instruction returns from the untrusted VMM, the registers that the TDX guest shares to the VMM need to be cleared to avoid speculative execution of VMM-provided values. RSI is specified in the bitmap of those registers, but it is missing when zeroing out those registers in the current TDX_HYPERCALL. It was there when it was originally added in commit 752d13305c78 ("x86/tdx: Expand __tdx_hypercall() to handle more arguments"), but was later removed in commit 1e70c680375a ("x86/tdx: Do not corrupt frame-pointer in __tdx_hypercall()"), which was correct because %rsi is later restored in the "pop %rsi". However a later commit 7a3a401874be ("x86/tdx: Drop flags from __tdx_hypercall()") removed that "pop %rsi" but forgot to add the "xor %rsi, %rsi" back. Fix by adding it back. | 2024-05-21 | not yet calculated | CVE-2023-52874 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt2701: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. | 2024-05-21 | not yet calculated | CVE-2023-52875 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt7629-eth: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference. | 2024-05-21 | not yet calculated | CVE-2023-52876 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() It is possible that typec_register_partner() returns ERR_PTR on failure. When port->partner is an error, a NULL pointer dereference may occur as shown below. [91222.095236][ T319] typec port0: failed to register partner (-17) ... [91225.061491][ T319] Unable to handle kernel NULL pointer dereference at virtual address 000000000000039f [91225.274642][ T319] pc : tcpm_pd_data_request+0x310/0x13fc [91225.274646][ T319] lr : tcpm_pd_data_request+0x298/0x13fc [91225.308067][ T319] Call trace: [91225.308070][ T319] tcpm_pd_data_request+0x310/0x13fc [91225.308073][ T319] tcpm_pd_rx_handler+0x100/0x9e8 [91225.355900][ T319] kthread_worker_fn+0x178/0x58c [91225.355902][ T319] kthread+0x150/0x200 [91225.355905][ T319] ret_from_fork+0x10/0x30 Add a check for port->partner to avoid dereferencing a NULL pointer. | 2024-05-21 | not yet calculated | CVE-2023-52877 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: can: dev: can_put_echo_skb(): don't crash kernel if can_priv::echo_skb is accessed out of bounds If the "struct can_priv::echoo_skb" is accessed out of bounds, this would cause a kernel crash. Instead, issue a meaningful warning message and return with an error. | 2024-05-21 | not yet calculated | CVE-2023-52878 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tracing: Have trace_event_file have ref counters The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor. | 2024-05-21 | not yet calculated | CVE-2023-52879 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldisc Any unprivileged user can attach N_GSM0710 ldisc, but it requires CAP_NET_ADMIN to create a GSM network anyway. Require initial namespace CAP_NET_ADMIN to do that. | 2024-05-24 | not yet calculated | CVE-2023-52880 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bcachefs: Check for journal entries overruning end of sb clean section Fix a missing bounds check in superblock validation. Note that we don't yet have repair code for this case - repair code for individual items is generally low priority, since the whole superblock is checksummed, validated prior to write, and we have backups. | 2024-05-20 | not yet calculated | CVE-2024-35948 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: btrfs: make sure that WRITTEN is set on all metadata blocks We previously would call btrfs_check_leaf() if we had the check integrity code enabled, which meant that we could only run the extended leaf checks if we had WRITTEN set on the header flags. This leaves a gap in our checking, because we could end up with corruption on disk where WRITTEN isn't set on the leaf, and then the extended leaf checks don't get run which we rely on to validate all of the item pointers to make sure we don't access memory outside of the extent buffer. However, since 732fab95abe2 ("btrfs: check-integrity: remove CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only ever call it on blocks that are being written out, and thus have WRITTEN set, or that are being read in, which should have WRITTEN set. Add checks to make sure we have WRITTEN set appropriately, and then make sure __btrfs_check_leaf() always does the item checking. This will protect us from file systems that have been corrupted and no longer have WRITTEN set on some of the blocks. This was hit on a crafted image tweaking the WRITTEN bit and reported by KASAN as out-of-bound access in the eb accessors. The example is a dir item at the end of an eb. [2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2 [2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI [2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f] [2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1 [2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0 [2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206 [2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0 [2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748 [2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9 [2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a [2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8 [2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 [2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0 [2.621] Call Trace: [2.621] <TASK> [2.621] ? show_regs+0x74/0x80 [2.621] ? die_addr+0x46/0xc0 [2.621] ? exc_general_protection+0x161/0x2a0 [2.621] ? asm_exc_general_protection+0x26/0x30 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? btrfs_get_16+0x34b/0x6d0 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? __pfx_btrfs_get_16+0x10/0x10 [2.621] ? __pfx_mutex_unlock+0x10/0x10 [2.621] btrfs_match_dir_item_name+0x101/0x1a0 [2.621] btrfs_lookup_dir_item+0x1f3/0x280 [2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10 [2.621] btrfs_get_tree+0xd25/0x1910 [ copy more details from report ] | 2024-05-20 | not yet calculated | CVE-2024-35949 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/client: Fully protect modes[] with dev->mode_config.mutex The modes[] array contains pointers to modes on the connectors' mode lists, which are protected by dev->mode_config.mutex. Thus we need to extend modes[] the same protection or by the time we use it the elements may already be pointing to freed/reused memory. | 2024-05-20 | not yet calculated | CVE-2024-35950 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() Subject: [PATCH] drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() If some the pages or sgt allocation failed, we shouldn't release the pages ref we got earlier, otherwise we will end up with unbalanced get/put_pages() calls. We should instead leave everything in place and let the BO release function deal with extra cleanup when the object is destroyed, or let the fault handler try again next time it's called. | 2024-05-20 | not yet calculated | CVE-2024-35951 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/ast: Fix soft lockup There is a while-loop in ast_dp_set_on_off() that could lead to infinite-loop. This is because the register, VGACRI-Dx, checked in this API is a scratch register actually controlled by a MCU, named DPMCU, in BMC. These scratch registers are protected by scu-lock. If suc-lock is not off, DPMCU can not update these registers and then host will have soft lockup due to never updated status. DPMCU is used to control DP and relative registers to handshake with host's VGA driver. Even the most time-consuming task, DP's link training, is less than 100ms. 200ms should be enough. | 2024-05-20 | not yet calculated | CVE-2024-35952 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix deadlock in context_xa ivpu_device->context_xa is locked both in kernel thread and IRQ context. It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization otherwise the lock could be acquired from a thread and interrupted by an IRQ that locks it for the second time causing the deadlock. This deadlock was reported by lockdep and observed in internal tests. | 2024-05-20 | not yet calculated | CVE-2024-35953 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: scsi: sg: Avoid sg device teardown race sg_remove_sfp_usercontext() must not use sg_device_destroy() after calling scsi_device_put(). sg_device_destroy() is accessing the parent scsi_device request_queue which will already be set to NULL when the preceding call to scsi_device_put() removed the last reference to the parent scsi_device. The resulting NULL pointer exception will then crash the kernel. | 2024-05-20 | not yet calculated | CVE-2024-35954 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix possible use-after-free issue on kprobe registration When unloading a module, its state is changing MODULE_STATE_LIVE -> MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take a time. `is_module_text_address()` and `__module_text_address()` works with MODULE_STATE_LIVE and MODULE_STATE_GOING. If we use `is_module_text_address()` and `__module_text_address()` separately, there is a chance that the first one is succeeded but the next one is failed because module->state becomes MODULE_STATE_UNFORMED between those operations. In `check_kprobe_address_safe()`, if the second `__module_text_address()` is failed, that is ignored because it expected a kernel_text address. But it may have failed simply because module->state has been changed to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify non-exist module text address (use-after-free). To fix this problem, we should not use separated `is_module_text_address()` and `__module_text_address()`, but use only `__module_text_address()` once and do `try_module_get(module)` which is only available with MODULE_STATE_LIVE. | 2024-05-20 | not yet calculated | CVE-2024-35955 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction. However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation. The fix is to ensure that every qgroup PREALLOC reservation observes the following properties: 1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation. This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row. | 2024-05-20 | not yet calculated | CVE-2024-35956 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix WARN_ON in iommu probe path Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices") adds all devices probed by the iommu driver in a rbtree indexed by the source ID of each device. It assumes that each device has a unique source ID. This assumption is incorrect and the VT-d spec doesn't state this requirement either. The reason for using a rbtree to track devices is to look up the device with PCI bus and devfunc in the paths of handling ATS invalidation time out error and the PRI I/O page faults. Both are PCI ATS feature related. Only track the devices that have PCI ATS capabilities in the rbtree to avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some platforms below kernel splat will be displayed and the iommu probe results in failure. WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90 Call Trace: <TASK> ? __warn+0x7e/0x180 ? intel_iommu_probe_device+0x319/0xd90 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? intel_iommu_probe_device+0x319/0xd90 ? debug_mutex_init+0x37/0x50 __iommu_probe_device+0xf2/0x4f0 iommu_probe_device+0x22/0x70 iommu_bus_notifier+0x1e/0x40 notifier_call_chain+0x46/0x150 blocking_notifier_call_chain+0x42/0x60 bus_notify+0x2f/0x50 device_add+0x5ed/0x7e0 platform_device_add+0xf5/0x240 mfd_add_devices+0x3f9/0x500 ? preempt_count_add+0x4c/0xa0 ? up_write+0xa2/0x1b0 ? __debugfs_create_file+0xe3/0x150 intel_lpss_probe+0x49f/0x5b0 ? pci_conf1_write+0xa3/0xf0 intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci] pci_device_probe+0x95/0x120 really_probe+0xd9/0x370 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x73/0x150 driver_probe_device+0x19/0xa0 __driver_attach+0xb6/0x180 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x77/0xd0 bus_add_driver+0x114/0x210 driver_register+0x5b/0x110 ? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci] do_one_initcall+0x57/0x2b0 ? kmalloc_trace+0x21e/0x280 ? do_init_module+0x1e/0x210 do_init_module+0x5f/0x210 load_module+0x1d37/0x1fc0 ? init_module_from_file+0x86/0xd0 init_module_from_file+0x86/0xd0 idempotent_init_module+0x17c/0x230 __x64_sys_finit_module+0x56/0xb0 do_syscall_64+0x6e/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79 | 2024-05-20 | not yet calculated | CVE-2024-35957 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: ena: Fix incorrect descriptor free behavior ENA has two types of TX queues: - queues which only process TX packets arriving from the network stack - queues which only process TX packets forwarded to it by XDP_REDIRECT or XDP_TX instructions The ena_free_tx_bufs() cycles through all descriptors in a TX queue and unmaps + frees every descriptor that hasn't been acknowledged yet by the device (uncompleted TX transactions). The function assumes that the processed TX queue is necessarily from the first category listed above and ends up using napi_consume_skb() for descriptors belonging to an XDP specific queue. This patch solves a bug in which, in case of a VF reset, the descriptors aren't freed correctly, leading to crashes. | 2024-05-20 | not yet calculated | CVE-2024-35958 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix mlx5e_priv_init() cleanup flow When mlx5e_priv_init() fails, the cleanup flow calls mlx5e_selq_cleanup which calls mlx5e_selq_apply() that assures that the `priv->state_lock` is held using lockdep_is_held(). Acquire the state_lock in mlx5e_selq_cleanup(). Kernel log: ============================= WARNING: suspicious RCU usage 6.8.0-rc3_net_next_841a9b5 #1 Not tainted ----------------------------- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c:124 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by systemd-modules/293: #0: ffffffffa05067b0 (devices_rwsem){++++}-{3:3}, at: ib_register_client+0x109/0x1b0 [ib_core] #1: ffff8881096c65c0 (&device->client_data_rwsem){++++}-{3:3}, at: add_client_context+0x104/0x1c0 [ib_core] stack backtrace: CPU: 4 PID: 293 Comm: systemd-modules Not tainted 6.8.0-rc3_net_next_841a9b5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x8a/0xa0 lockdep_rcu_suspicious+0x154/0x1a0 mlx5e_selq_apply+0x94/0xa0 [mlx5_core] mlx5e_selq_cleanup+0x3a/0x60 [mlx5_core] mlx5e_priv_init+0x2be/0x2f0 [mlx5_core] mlx5_rdma_setup_rn+0x7c/0x1a0 [mlx5_core] rdma_init_netdev+0x4e/0x80 [ib_core] ? mlx5_rdma_netdev_free+0x70/0x70 [mlx5_core] ipoib_intf_init+0x64/0x550 [ib_ipoib] ipoib_intf_alloc+0x4e/0xc0 [ib_ipoib] ipoib_add_one+0xb0/0x360 [ib_ipoib] add_client_context+0x112/0x1c0 [ib_core] ib_register_client+0x166/0x1b0 [ib_core] ? 0xffffffffa0573000 ipoib_init_module+0xeb/0x1a0 [ib_ipoib] do_one_initcall+0x61/0x250 do_init_module+0x8a/0x270 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x17d/0x230 __x64_sys_finit_module+0x61/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x46/0x4e </TASK> | 2024-05-20 | not yet calculated | CVE-2024-35959 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Properly link new fs rules into the tree Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle. | 2024-05-20 | not yet calculated | CVE-2024-35960 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Register devlink first under devlink lock In case device is having a non fatal FW error during probe, the driver will report the error to user via devlink. This will trigger a WARN_ON, since mlx5 is calling devlink_register() last. In order to avoid the WARN_ON[1], change mlx5 to invoke devl_register() first under devlink lock. [1] WARNING: CPU: 5 PID: 227 at net/devlink/health.c:483 devlink_recover_notify.constprop.0+0xb8/0xc0 CPU: 5 PID: 227 Comm: kworker/u16:3 Not tainted 6.4.0-rc5_for_upstream_min_debug_2023_06_12_12_38 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_reporter_err_work [mlx5_core] RIP: 0010:devlink_recover_notify.constprop.0+0xb8/0xc0 Call Trace: <TASK> ? __warn+0x79/0x120 ? devlink_recover_notify.constprop.0+0xb8/0xc0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_recover_notify.constprop.0+0xb8/0xc0 devlink_health_report+0x4a/0x1c0 mlx5_fw_reporter_err_work+0xa4/0xd0 [mlx5_core] process_one_work+0x1bb/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x4d/0x3c0 ? process_one_work+0x3c0/0x3c0 kthread+0xc6/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> | 2024-05-20 | not yet calculated | CVE-2024-35961 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: complete validation of user input In my recent commit, I missed that do_replace() handlers use copy_from_sockptr() (which I fixed), followed by unsafe copy_from_sockptr_offset() calls. In all functions, we can perform the @optlen validation before even calling xt_alloc_table_info() with the following check: if ((u64)optlen < (u64)tmp.size + sizeof(tmp)) return -EINVAL; | 2024-05-20 | not yet calculated | CVE-2024-35962 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Fix not validating setsockopt user input Check user input length before copying data. | 2024-05-20 | not yet calculated | CVE-2024-35963 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix not validating setsockopt user input Check user input length before copying data. | 2024-05-20 | not yet calculated | CVE-2024-35964 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix not validating setsockopt user input Check user input length before copying data. | 2024-05-20 | not yet calculated | CVE-2024-35965 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix not validating setsockopt user input syzbot reported rfcomm_sock_setsockopt_old() is copying data without checking user input length. BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt_old net/bluetooth/rfcomm/sock.c:632 [inline] BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt+0x893/0xa70 net/bluetooth/rfcomm/sock.c:673 Read of size 4 at addr ffff8880209a8bc3 by task syz-executor632/5064 | 2024-05-20 | not yet calculated | CVE-2024-35966 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: Fix not validating setsockopt user input syzbot reported sco_sock_setsockopt() is copying data without checking user input length. BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90 net/bluetooth/sco.c:893 Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578 | 2024-05-20 | not yet calculated | CVE-2024-35967 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: pds_core: Fix pdsc_check_pci_health function to use work thread When the driver notices fw_status == 0xff it tries to perform a PCI reset on itself via pci_reset_function() in the context of the driver's health thread. However, pdsc_reset_prepare calls pdsc_stop_health_thread(), which attempts to stop/flush the health thread. This results in a deadlock because the stop/flush will never complete since the driver called pci_reset_function() from the health thread context. Fix by changing the pdsc_check_pci_health_function() to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's work queue. Unloading the driver in the fw_down/dead state uncovered another issue, which can be seen in the following trace: WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440 [...] RIP: 0010:__queue_work+0x358/0x440 [...] Call Trace: <TASK> ? __warn+0x85/0x140 ? __queue_work+0x358/0x440 ? report_bug+0xfc/0x1e0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x358/0x440 queue_work_on+0x28/0x30 pdsc_devcmd_locked+0x96/0xe0 [pds_core] pdsc_devcmd_reset+0x71/0xb0 [pds_core] pdsc_teardown+0x51/0xe0 [pds_core] pdsc_remove+0x106/0x200 [pds_core] pci_device_remove+0x37/0xc0 device_release_driver_internal+0xae/0x140 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xa0 pdsc_cleanup_module+0x10/0x780 [pds_core] __x64_sys_delete_module+0x142/0x2b0 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fbd9d03a14b [...] Fix this by preventing the devcmd reset if the FW is not running. | 2024-05-20 | not yet calculated | CVE-2024-35968 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it still means hlist_for_each_entry_rcu can return an item that got removed from the list. The memory itself of such item is not freed thanks to RCU but nothing guarantees the actual content of the memory is sane. In particular, the reference count can be zero. This can happen if ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough timing, this can happen: 1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry. 2. Then, the whole ipv6_del_addr is executed for the given entry. The reference count drops to zero and kfree_rcu is scheduled. 3. ipv6_get_ifaddr continues and tries to increments the reference count (in6_ifa_hold). 4. The rcu is unlocked and the entry is freed. 5. The freed entry is returned. Prevent increasing of the reference count in such case. The name in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe. [ 41.506330] refcount_t: addition on 0; use-after-free. [ 41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130 [ 41.507413] Modules linked in: veth bridge stp llc [ 41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14 [ 41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [ 41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130 [ 41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff [ 41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282 [ 41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000 [ 41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900 [ 41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff [ 41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000 [ 41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48 [ 41.514086] FS: 00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000 [ 41.514726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0 [ 41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.516799] Call Trace: [ 41.517037] <TASK> [ 41.517249] ? __warn+0x7b/0x120 [ 41.517535] ? refcount_warn_saturate+0xa5/0x130 [ 41.517923] ? report_bug+0x164/0x190 [ 41.518240] ? handle_bug+0x3d/0x70 [ 41.518541] ? exc_invalid_op+0x17/0x70 [ 41.520972] ? asm_exc_invalid_op+0x1a/0x20 [ 41.521325] ? refcount_warn_saturate+0xa5/0x130 [ 41.521708] ipv6_get_ifaddr+0xda/0xe0 [ 41.522035] inet6_rtm_getaddr+0x342/0x3f0 [ 41.522376] ? __pfx_inet6_rtm_getaddr+0x10/0x10 [ 41.522758] rtnetlink_rcv_msg+0x334/0x3d0 [ 41.523102] ? netlink_unicast+0x30f/0x390 [ 41.523445] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 41.523832] netlink_rcv_skb+0x53/0x100 [ 41.524157] netlink_unicast+0x23b/0x390 [ 41.524484] netlink_sendmsg+0x1f2/0x440 [ 41.524826] __sys_sendto+0x1d8/0x1f0 [ 41.525145] __x64_sys_sendto+0x1f/0x30 [ 41.525467] do_syscall_64+0xa5/0x1b0 [ 41.525794] entry_SYSCALL_64_after_hwframe+0x72/0x7a [ 41.526213] RIP: 0033:0x7fbc4cfcea9a [ 41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 41.527942] RSP: 002b:00007f ---truncated--- | 2024-05-20 | not yet calculated | CVE-2024-35969 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: af_unix: Clear stale u->oob_skb. syzkaller started to report deadlock of unix_gc_lock after commit 4090fa373f0e ("af_unix: Replace garbage collection algorithm."), but it just uncovers the bug that has been there since commit 314001f0bf92 ("af_unix: Add OOB support"). The repro basically does the following. from socket import * from array import array c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) c1.sendmsg([b'a'], [(SOL_SOCKET, SCM_RIGHTS, array("i", [c2.fileno()]))], MSG_OOB) c2.recv(1) # blocked as no normal data in recv queue c2.close() # done async and unblock recv() c1.close() # done async and trigger GC A socket sends its file descriptor to itself as OOB data and tries to receive normal data, but finally recv() fails due to async close(). The problem here is wrong handling of OOB skb in manage_oob(). When recvmsg() is called without MSG_OOB, manage_oob() is called to check if the peeked skb is OOB skb. In such a case, manage_oob() pops it out of the receive queue but does not clear unix_sock(sk)->oob_skb. This is wrong in terms of uAPI. Let's say we send "hello" with MSG_OOB, and "world" without MSG_OOB. The 'o' is handled as OOB data. When recv() is called twice without MSG_OOB, the OOB data should be lost. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM, 0) >>> c1.send(b'hello', MSG_OOB) # 'o' is OOB data 5 >>> c1.send(b'world') 5 >>> c2.recv(5) # OOB data is not received b'hell' >>> c2.recv(5) # OOB date is skipped b'world' >>> c2.recv(5, MSG_OOB) # This should return an error b'o' In the same situation, TCP actually returns -EINVAL for the last recv(). Also, if we do not clear unix_sk(sk)->oob_skb, unix_poll() always set EPOLLPRI even though the data has passed through by previous recv(). To avoid these issues, we must clear unix_sk(sk)->oob_skb when dequeuing it from recv queue. The reason why the old GC did not trigger the deadlock is because the old GC relied on the receive queue to detect the loop. When it is triggered, the socket with OOB data is marked as GC candidate because file refcount == inflight count (1). However, after traversing all inflight sockets, the socket still has a positive inflight count (1), thus the socket is excluded from candidates. Then, the old GC lose the chance to garbage-collect the socket. With the old GC, the repro continues to create true garbage that will never be freed nor detected by kmemleak as it's linked to the global inflight list. That's why we couldn't even notice the issue. | 2024-05-20 | not yet calculated | CVE-2024-35970 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Handle softirqs at the end of IRQ thread to fix hang The ks8851_irq() thread may call ks8851_rx_pkts() in case there are any packets in the MAC FIFO, which calls netif_rx(). This netif_rx() implementation is guarded by local_bh_disable() and local_bh_enable(). The local_bh_enable() may call do_softirq() to run softirqs in case any are pending. One of the softirqs is net_rx_action, which ultimately reaches the driver .start_xmit callback. If that happens, the system hangs. The entire call chain is below: ks8851_start_xmit_par from netdev_start_xmit netdev_start_xmit from dev_hard_start_xmit dev_hard_start_xmit from sch_direct_xmit sch_direct_xmit from __dev_queue_xmit __dev_queue_xmit from __neigh_update __neigh_update from neigh_update neigh_update from arp_process.constprop.0 arp_process.constprop.0 from __netif_receive_skb_one_core __netif_receive_skb_one_core from process_backlog process_backlog from __napi_poll.constprop.0 __napi_poll.constprop.0 from net_rx_action net_rx_action from __do_softirq __do_softirq from call_with_stack call_with_stack from do_softirq do_softirq from __local_bh_enable_ip __local_bh_enable_ip from netif_rx netif_rx from ks8851_irq ks8851_irq from irq_thread_fn irq_thread_fn from irq_thread irq_thread from kthread kthread from ret_from_fork The hang happens because ks8851_irq() first locks a spinlock in ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...) and with that spinlock locked, calls netif_rx(). Once the execution reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again which attempts to claim the already locked spinlock again, and the hang happens. Move the do_softirq() call outside of the spinlock protected section of ks8851_irq() by disabling BHs around the entire spinlock protected section of ks8851_irq() handler. Place local_bh_enable() outside of the spinlock protected section, so that it can trigger do_softirq() without the ks8851_par.c ks8851_lock_par() spinlock being held, and safely call ks8851_start_xmit_par() without attempting to lock the already locked spinlock. Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable() now, replace netif_rx() with __netif_rx() which is not duplicating the local_bh_disable()/local_bh_enable() calls. | 2024-05-20 | not yet calculated | CVE-2024-35971 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: geneve: fix header validation in geneve[6]_xmit_skb syzbot is able to trigger an uninit-value in geneve_xmit() [1] Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield()) uses skb_protocol(skb, true), pskb_inet_may_pull() is only using skb->protocol. If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol, pskb_inet_may_pull() does nothing at all. If a vlan tag was provided by the caller (af_packet in the syzbot case), the network header might not point to the correct location, and skb linear part could be smaller than expected. Add skb_vlan_inet_prepare() to perform a complete mac validation. Use this in geneve for the moment, I suspect we need to adopt this more broadly. v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest - Only call __vlan_get_protocol() for vlan types. v2,v3 - Addressed Sabrina comments on v1 and v2 [1] BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline] BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 geneve_xmit_skb drivers/net/geneve.c:910 [inline] geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335 dev_queue_xmit include/linux/netdevice.h:3091 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 | 2024-05-20 | not yet calculated | CVE-2024-35973 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: block: fix q->blkg_list corruption during disk rebind Multiple gendisk instances can allocated/added for single request queue in case of disk rebind. blkg may still stay in q->blkg_list when calling blkcg_init_disk() for rebind, then q->blkg_list becomes corrupted. Fix the list corruption issue by: - add blkg_init_queue() to initialize q->blkg_list & q->blkcg_mutex only - move calling blkg_init_queue() into blk_alloc_queue() The list corruption should be started since commit f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()") which delays removing blkg from q->blkg_list into blkg_free_workfn(). | 2024-05-20 | not yet calculated | CVE-2024-35974 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix transmit scheduler resource leak Inorder to support shaping and scheduling, Upon class creation Netdev driver allocates trasmit schedulers. The previous patch which added support for Round robin scheduling has a bug due to which driver is not freeing transmit schedulers post class deletion. This patch fixes the same. | 2024-05-20 | not yet calculated | CVE-2024-35975 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING syzbot reported an illegal copy in xsk_setsockopt() [1] Make sure to validate setsockopt() @optlen parameter. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420 Read of size 4 at addr ffff888028c6cde3 by task syz-executor.0/7549 CPU: 0 PID: 7549 Comm: syz-executor.0 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] xsk_setsockopt+0x909/0xa40 net/xdp/xsk.c:1420 do_sock_setsockopt+0x3af/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7fb40587de69 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb40665a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007fb4059abf80 RCX: 00007fb40587de69 RDX: 0000000000000005 RSI: 000000000000011b RDI: 0000000000000006 RBP: 00007fb4058ca47a R08: 0000000000000002 R09: 0000000000000000 R10: 0000000020001980 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fb4059abf80 R15: 00007fff57ee4d08 </TASK> Allocated by task 7549: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __do_kmalloc_node mm/slub.c:3966 [inline] __kmalloc+0x233/0x4a0 mm/slub.c:3979 kmalloc include/linux/slab.h:632 [inline] __cgroup_bpf_run_filter_setsockopt+0xd2f/0x1040 kernel/bpf/cgroup.c:1869 do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfb/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 The buggy address belongs to the object at ffff888028c6cde0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 1 bytes to the right of allocated 2-byte region [ffff888028c6cde0, ffff888028c6cde2) The buggy address belongs to the physical page: page:ffffea0000a31b00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888028c6c9c0 pfn:0x28c6c anon flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 00fff00000000800 ffff888014c41280 0000000000000000 dead000000000001 raw: ffff888028c6c9c0 0000000080800057 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112cc0(GFP_USER|__GFP_NOWARN|__GFP_NORETRY), pid 6648, tgid 6644 (syz-executor.0), ts 133906047828, free_ts 133859922223 set_page_owner include/linux/page_owner.h:31 [inline] post_alloc_hook+0x1ea/0x210 mm/page_alloc.c:1533 prep_new_page mm/page_alloc.c: ---truncated--- | 2024-05-20 | not yet calculated | CVE-2024-35976 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_uart: properly fix race condition The cros_ec_uart_probe() function calls devm_serdev_device_open() before it calls serdev_device_set_client_ops(). This can trigger a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ... ? ttyport_receive_buf A simplified version of crashing code is as follows: static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl, const u8 *data, size_t count) { struct serdev_device *serdev = ctrl->serdev; if (!serdev || !serdev->ops->receive_buf) // CRASH! return 0; return serdev->ops->receive_buf(serdev, data, count); } It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops will also exist. This conflicts with the existing cros_ec_uart_probe() logic, as it first calls devm_serdev_device_open() (which sets SERPORT_ACTIVE), and only later sets serdev->ops via serdev_device_set_client_ops(). Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition") attempted to fix a similar race condition, but while doing so, made the window of error for this race condition to happen much wider. Attempt to fix the race condition again, making sure we fully setup before calling devm_serdev_device_open(). | 2024-05-20 | not yet calculated | CVE-2024-35977 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: raid1: fix use-after-free for original bio in raid1_write_request() r1_bio->bios[] is used to record new bios that will be issued to underlying disks, however, in raid1_write_request(), r1_bio->bios[] will set to the original bio temporarily. Meanwhile, if blocked rdev is set, free_r1bio() will be called causing that all r1_bio->bios[] to be freed: raid1_write_request() r1_bio = alloc_r1bio(mddev, bio); -> r1_bio->bios[] is NULL for (i = 0; i < disks; i++) -> for each rdev in conf // first rdev is normal r1_bio->bios[0] = bio; -> set to original bio // second rdev is blocked if (test_bit(Blocked, &rdev->flags)) break if (blocked_rdev) free_r1bio() put_all_bios() bio_put(r1_bio->bios[0]) -> original bio is freed Test scripts: mdadm -CR /dev/md0 -l1 -n4 /dev/sd[abcd] --assume-clean fio -filename=/dev/md0 -ioengine=libaio -rw=write -bs=4k -numjobs=1 \ -iodepth=128 -name=test -direct=1 echo blocked > /sys/block/md0/md/rd2/state Test result: BUG bio-264 (Not tainted): Object already free ----------------------------------------------------------------------------- Allocated in mempool_alloc_slab+0x24/0x50 age=1 cpu=1 pid=869 kmem_cache_alloc+0x324/0x480 mempool_alloc_slab+0x24/0x50 mempool_alloc+0x6e/0x220 bio_alloc_bioset+0x1af/0x4d0 blkdev_direct_IO+0x164/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 io_submit_one+0x5ca/0xb70 __do_sys_io_submit+0x86/0x270 __x64_sys_io_submit+0x22/0x30 do_syscall_64+0xb1/0x210 entry_SYSCALL_64_after_hwframe+0x6c/0x74 Freed in mempool_free_slab+0x1f/0x30 age=1 cpu=1 pid=869 kmem_cache_free+0x28c/0x550 mempool_free_slab+0x1f/0x30 mempool_free+0x40/0x100 bio_free+0x59/0x80 bio_put+0xf0/0x220 free_r1bio+0x74/0xb0 raid1_make_request+0xadf/0x1150 md_handle_request+0xc7/0x3b0 md_submit_bio+0x76/0x130 __submit_bio+0xd8/0x1d0 submit_bio_noacct_nocheck+0x1eb/0x5c0 submit_bio_noacct+0x169/0xd40 submit_bio+0xee/0x1d0 blkdev_direct_IO+0x322/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 Since that bios for underlying disks are not allocated yet, fix this problem by using mempool_free() directly to free the r1_bio. | 2024-05-20 | not yet calculated | CVE-2024-35979 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: arm64: tlb: Fix TLBI RANGE operand KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty pages are collected by VMM and the page table entries become write protected during live migration. Unfortunately, the operand passed to the TLBI RANGE instruction isn't correctly sorted out due to the commit 117940aa6e5f ("KVM: arm64: Define kvm_tlb_flush_vmid_range()"). It leads to crash on the destination VM after live migration because TLBs aren't flushed completely and some of the dirty pages are missed. For example, I have a VM where 8GB memory is assigned, starting from 0x40000000 (1GB). Note that the host has 4KB as the base page size. In the middile of migration, kvm_tlb_flush_vmid_range() is executed to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to __kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3 and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop in the __flush_tlb_range_op() until the variable @scale underflows and becomes -9, 0xffff708000040000 is set as the operand. The operand is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to invalid @scale and @num. Fix it by extending __TLBI_RANGE_NUM() to support the combination of SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can be returned from the macro, meaning the TLBs for 0x200000 pages in the above example can be flushed in one shoot with SCALE#3 and NUM#31. The macro TLBI_RANGE_MASK is dropped since no one uses it any more. The comments are also adjusted accordingly. | 2024-05-20 | not yet calculated | CVE-2024-35980 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: virtio_net: Do not send RSS key if it is not supported There is a bug when setting the RSS options in virtio_net that can break the whole machine, getting the kernel into an infinite loop. Running the following command in any QEMU virtual machine with virtionet will reproduce this problem: # ethtool -X eth0 hfunc toeplitz This is how the problem happens: 1) ethtool_set_rxfh() calls virtnet_set_rxfh() 2) virtnet_set_rxfh() calls virtnet_commit_rss_command() 3) virtnet_commit_rss_command() populates 4 entries for the rss scatter-gather 4) Since the command above does not have a key, then the last scatter-gatter entry will be zeroed, since rss_key_size == 0. sg_buf_size = vi->rss_key_size; 5) This buffer is passed to qemu, but qemu is not happy with a buffer with zero length, and do the following in virtqueue_map_desc() (QEMU function): if (!sz) { virtio_error(vdev, "virtio: zero sized buffers are not allowed"); 6) virtio_error() (also QEMU function) set the device as broken vdev->broken = true; 7) Qemu bails out, and do not repond this crazy kernel. 8) The kernel is waiting for the response to come back (function virtnet_send_command()) 9) The kernel is waiting doing the following : while (!virtqueue_get_buf(vi->cvq, &tmp) && !virtqueue_is_broken(vi->cvq)) cpu_relax(); 10) None of the following functions above is true, thus, the kernel loops here forever. Keeping in mind that virtqueue_is_broken() does not look at the qemu `vdev->broken`, so, it never realizes that the vitio is broken at QEMU side. Fix it by not sending RSS commands if the feature is not available in the device. | 2024-05-20 | not yet calculated | CVE-2024-35981 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bounds: Use the right number of bits for power-of-two CONFIG_NR_CPUS bits_per() rounds up to the next power of two when passed a power of two. This causes crashes on some machines and configurations. | 2024-05-20 | not yet calculated | CVE-2024-35983 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen. | 2024-05-20 | not yet calculated | CVE-2024-35985 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered The power_supply frame-work is not really designed for there to be long living in kernel references to power_supply devices. Specifically unregistering a power_supply while some other code has a reference to it triggers a WARN in power_supply_unregister(): WARN_ON(atomic_dec_return(&psy->use_cnt)); Folllowed by the power_supply still getting removed and the backing data freed anyway, leaving the tusb1210 charger-detect code with a dangling reference, resulting in a crash the next time tusb1210_get_online() is called. Fix this by only holding the reference in tusb1210_get_online() freeing it at the end of the function. Note this still leaves a theoretical race window, but it avoids the issue when manually rmmod-ing the charger chip driver during development. | 2024-05-20 | not yet calculated | CVE-2024-35986 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: riscv: Fix loading 64-bit NOMMU kernels past the start of RAM commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") added logic to allow using RAM below the kernel load address. However, this does not work for NOMMU, where PAGE_OFFSET is fixed to the kernel load address. Since that range of memory corresponds to PFNs below ARCH_PFN_OFFSET, mm initialization runs off the beginning of mem_map and corrupts adjacent kernel memory. Fix this by restoring the previous behavior for NOMMU kernels. | 2024-05-20 | not yet calculated | CVE-2024-35987 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: riscv: Fix TASK_SIZE on 64-bit NOMMU On NOMMU, userspace memory can come from anywhere in physical RAM. The current definition of TASK_SIZE is wrong if any RAM exists above 4G, causing spurious failures in the userspace access routines. | 2024-05-20 | not yet calculated | CVE-2024-35988 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix oops during rmmod on single-CPU platforms During the removal of the idxd driver, registered offline callback is invoked as part of the clean up process. However, on systems with only one CPU online, no valid target is available to migrate the perf context, resulting in a kernel oops: BUG: unable to handle page fault for address: 000000000002a2b8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 1470e1067 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ #57 Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 RIP: 0010:mutex_lock+0x2e/0x50 ... Call Trace: <TASK> __die+0x24/0x70 page_fault_oops+0x82/0x160 do_user_addr_fault+0x65/0x6b0 __pfx___rdmsr_safe_on_cpu+0x10/0x10 exc_page_fault+0x7d/0x170 asm_exc_page_fault+0x26/0x30 mutex_lock+0x2e/0x50 mutex_lock+0x1e/0x50 perf_pmu_migrate_context+0x87/0x1f0 perf_event_cpu_offline+0x76/0x90 [idxd] cpuhp_invoke_callback+0xa2/0x4f0 __pfx_perf_event_cpu_offline+0x10/0x10 [idxd] cpuhp_thread_fun+0x98/0x150 smpboot_thread_fn+0x27/0x260 smpboot_thread_fn+0x1af/0x260 __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x103/0x140 __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 <TASK> Fix the issue by preventing the migration of the perf context to an invalid target. | 2024-05-20 | not yet calculated | CVE-2024-35989 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue drain_workqueue() cannot be called safely in a spinlocked context due to possible task rescheduling. In the multi-task scenario, calling queue_work() while drain_workqueue() will lead to a Call Trace as pushing a work on a draining workqueue is not permitted in spinlocked context. Call Trace: <TASK> ? __warn+0x7d/0x140 ? __queue_work+0x2b2/0x440 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x2b2/0x440 queue_work_on+0x28/0x30 idxd_misc_thread+0x303/0x5a0 [idxd] ? __schedule+0x369/0xb40 ? __pfx_irq_thread_fn+0x10/0x10 ? irq_thread+0xbc/0x1b0 irq_thread_fn+0x21/0x70 irq_thread+0x102/0x1b0 ? preempt_count_add+0x74/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0x103/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The current implementation uses a spinlock to protect event log workqueue and will lead to the Call Trace due to potential task rescheduling. To address the locking issue, convert the spinlock to mutex, allowing the drain_workqueue() to be called in a safe mutex-locked context. This change ensures proper synchronization when accessing the event log workqueue, preventing potential Call Trace and improving the overall robustness of the code. | 2024-05-20 | not yet calculated | CVE-2024-35991 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm: turn folio_test_hugetlb into a PageType The current folio_test_hugetlb() can be fooled by a concurrent folio split into returning true for a folio which has never belonged to hugetlbfs. This can't happen if the caller holds a refcount on it, but we have a few places (memory-failure, compaction, procfs) which do not and should not take a speculative reference. Since hugetlb pages do not use individual page mapcounts (they are always fully mapped and use the entire_mapcount field to record the number of mappings), the PageType field is available now that page_mapcount() ignores the value in this field. In compaction and with CONFIG_DEBUG_VM enabled, the current implementation can result in an oops, as reported by Luis. This happens since 9c5ccf2db04b ("mm: remove HUGETLB_PAGE_DTOR") effectively added some VM_BUG_ON() checks in the PageHuge() testing path. [willy@infradead.org: update vmcoreinfo] Link: https://lkml.kernel.org/r/ZgGZUvsdhaT1Va-T@casper.infradead.org | 2024-05-20 | not yet calculated | CVE-2024-35993 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: uefisecapp: Fix memory related IO errors and crashes It turns out that while the QSEECOM APP_SEND command has specific fields for request and response buffers, uefisecapp expects them both to be in a single memory region. Failure to adhere to this has (so far) resulted in either no response being written to the response buffer (causing an EIO to be emitted down the line), the SCM call to fail with EINVAL (i.e., directly from TZ/firmware), or the device to be hard-reset. While this issue can be triggered deterministically, in the current form it seems to happen rather sporadically (which is why it has gone unnoticed during earlier testing). This is likely due to the two kzalloc() calls (for request and response) being directly after each other. Which means that those likely return consecutive regions most of the time, especially when not much else is going on in the system. Fix this by allocating a single memory region for both request and response buffers, properly aligning both structs inside it. This unfortunately also means that the qcom_scm_qseecom_app_send() interface needs to be restructured, as it should no longer map the DMA regions separately. Therefore, move the responsibility of DMA allocation (or mapping) to the caller. | 2024-05-20 | not yet calculated | CVE-2024-35994 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Use access_width over bit_width for system memory accesses To align with ACPI 6.3+, since bit_width can be any 8-bit value, it cannot be depended on to be always on a clean 8b boundary. This was uncovered on the Cobalt 100 platform. SError Interrupt on CPU26, code 0xbe000011 -- SError CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted 5.15.2.1-13 #1 Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION pstate: 62400009 (nZCv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--) pc : cppc_get_perf_caps+0xec/0x410 lr : cppc_get_perf_caps+0xe8/0x410 sp : ffff8000155ab730 x29: ffff8000155ab730 x28: ffff0080139d0038 x27: ffff0080139d0078 x26: 0000000000000000 x25: ffff0080139d0058 x24: 00000000ffffffff x23: ffff0080139d0298 x22: ffff0080139d0278 x21: 0000000000000000 x20: ffff00802b251910 x19: ffff0080139d0000 x18: ffffffffffffffff x17: 0000000000000000 x16: ffffdc7e111bad04 x15: ffff00802b251008 x14: ffffffffffffffff x13: ffff013f1fd63300 x12: 0000000000000006 x11: ffffdc7e128f4420 x10: 0000000000000000 x9 : ffffdc7e111badec x8 : ffff00802b251980 x7 : 0000000000000000 x6 : ffff0080139d0028 x5 : 0000000000000000 x4 : ffff0080139d0018 x3 : 00000000ffffffff x2 : 0000000000000008 x1 : ffff8000155ab7a0 x0 : 0000000000000000 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted 5.15.2.1-13 #1 Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x24/0x30 dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 panic+0x16c/0x384 add_taint+0x0/0xc0 arm64_serror_panic+0x7c/0x90 arm64_is_fatal_ras_serror+0x34/0xa4 do_serror+0x50/0x6c el1h_64_error_handler+0x40/0x74 el1h_64_error+0x7c/0x80 cppc_get_perf_caps+0xec/0x410 cppc_cpufreq_cpu_init+0x74/0x400 [cppc_cpufreq] cpufreq_online+0x2dc/0xa30 cpufreq_add_dev+0xc0/0xd4 subsys_interface_register+0x134/0x14c cpufreq_register_driver+0x1b0/0x354 cppc_cpufreq_init+0x1a8/0x1000 [cppc_cpufreq] do_one_initcall+0x50/0x250 do_init_module+0x60/0x27c load_module+0x2300/0x2570 __do_sys_finit_module+0xa8/0x114 __arm64_sys_finit_module+0x2c/0x3c invoke_syscall+0x78/0x100 el0_svc_common.constprop.0+0x180/0x1a0 do_el0_svc+0x84/0xa0 el0_svc+0x2c/0xc0 el0t_64_sync_handler+0xa4/0x12c el0t_64_sync+0x1a4/0x1a8 Instead, use access_width to determine the size and use the offset and width to shift and mask the bits to read/write out. Make sure to add a check for system memory since pcc redefines the access_width to subspace id. If access_width is not set, then fall back to using bit_width. [ rjw: Subject and changelog edits, comment adjustments ] | 2024-05-20 | not yet calculated | CVE-2024-35995 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cpu: Re-enable CPU mitigations by default for !X86 architectures Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it on for all architectures exception x86. A recent commit to turn mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta missed that "cpu_mitigations" is completely generic, whereas SPECULATION_MITIGATIONS is x86-specific. Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it select CPU_MITIGATIONS, as having two configs for the same thing is unnecessary and confusing. This will also allow x86 to use the knob to manage mitigations that aren't strictly related to speculative execution. Use another Kconfig to communicate to common code that CPU_MITIGATIONS is already defined instead of having x86's menu depend on the common CPU_MITIGATIONS. This allows keeping a single point of contact for all of x86's mitigations, and it's not clear that other architectures *want* to allow disabling mitigations at compile-time. | 2024-05-20 | not yet calculated | CVE-2024-35996 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: smb3: fix lock ordering potential deadlock in cifs_sync_mid_result Coverity spotted that the cifs_sync_mid_result function could deadlock "Thread deadlock (ORDER_REVERSAL) lock_order: Calling spin_lock acquires lock TCP_Server_Info.srv_lock while holding lock TCP_Server_Info.mid_lock" Addresses-Coverity: 1590401 ("Thread deadlock (ORDER_REVERSAL)") | 2024-05-20 | not yet calculated | CVE-2024-35998 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: smb3: missing lock when picking channel Coverity spotted a place where we should have been holding the channel lock when accessing the ses channel index. Addresses-Coverity: 1582039 ("Data race condition (MISSING_LOCK)") | 2024-05-20 | not yet calculated | CVE-2024-35999 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix missing hugetlb_lock for resv uncharge There is a recent report on UFFDIO_COPY over hugetlb: https://lore.kernel.org/all/000000000000ee06de0616177560@google.com/ 350: lockdep_assert_held(&hugetlb_lock); Should be an issue in hugetlb but triggered in an userfault context, where it goes into the unlikely path where two threads modifying the resv map together. Mike has a fix in that path for resv uncharge but it looks like the locking criteria was overlooked: hugetlb_cgroup_uncharge_folio_rsvd() will update the cgroup pointer, so it requires to be called with the lock held. | 2024-05-20 | not yet calculated | CVE-2024-36000 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the pre-flush when appending to a file in writethrough mode In netfs_perform_write(), when the file is marked NETFS_ICTX_WRITETHROUGH or O_*SYNC or RWF_*SYNC was specified, write-through caching is performed on a buffered file. When setting up for write-through, we flush any conflicting writes in the region and wait for the write to complete, failing if there's a write error to return. The issue arises if we're writing at or above the EOF position because we skip the flush and - more importantly - the wait. This becomes a problem if there's a partial folio at the end of the file that is being written out and we want to make a write to it too. Both the already-running write and the write we start both want to clear the writeback mark, but whoever is second causes a warning looking something like: ------------[ cut here ]------------ R=00000012: folio 11 is not under writeback WARNING: CPU: 34 PID: 654 at fs/netfs/write_collect.c:105 ... CPU: 34 PID: 654 Comm: kworker/u386:27 Tainted: G S ... ... Workqueue: events_unbound netfs_write_collection_worker ... RIP: 0010:netfs_writeback_lookup_folio Fix this by making the flush-and-wait unconditional. It will do nothing if there are no folios in the pagecache and will return quickly if there are no folios in the region specified. Further, move the WBC attachment above the flush call as the flush is going to attach a WBC and detach it again if it is not present - and since we need one anyway we might as well share it. | 2024-05-20 | not yet calculated | CVE-2024-36001 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: dpll: fix dpll_pin_on_pin_register() for multiple parent pins In scenario where pin is registered with multiple parent pins via dpll_pin_on_pin_register(..), all belonging to the same dpll device. A second call to dpll_pin_on_pin_unregister(..) would cause a call trace, as it tries to use already released registration resources (due to fix introduced in b446631f355e). In this scenario pin was registered twice, so resources are not yet expected to be release until each registered pin/pin pair is unregistered. Currently, the following crash/call trace is produced when ice driver is removed on the system with installed E810T NIC which includes dpll device: WARNING: CPU: 51 PID: 9155 at drivers/dpll/dpll_core.c:809 dpll_pin_ops+0x20/0x30 RIP: 0010:dpll_pin_ops+0x20/0x30 Call Trace: ? __warn+0x7f/0x130 ? dpll_pin_ops+0x20/0x30 dpll_msg_add_pin_freq+0x37/0x1d0 dpll_cmd_pin_get_one+0x1c0/0x400 ? __nlmsg_put+0x63/0x80 dpll_pin_event_send+0x93/0x140 dpll_pin_on_pin_unregister+0x3f/0x100 ice_dpll_deinit_pins+0xa1/0x230 [ice] ice_remove+0xf1/0x210 [ice] Fix by adding a parent pointer as a cookie when creating a registration, also when searching for it. For the regular pins pass NULL, this allows to create separated registration for each parent the pin is registered with. | 2024-05-20 | not yet calculated | CVE-2024-36002 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ice: fix LAG and VF lock dependency in ice_reset_vf() 9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf(). The commit placed this lock acquisition just prior to the acquisition of the VF configuration lock. If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK flag, this could deadlock with ice_vc_cfg_qs_msg() because it always acquires the locks in the order of the VF configuration lock and then the LAG mutex. Lockdep reports this violation almost immediately on creating and then removing 2 VF: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-rc6 #54 Tainted: G W O ------------------------------------------------------ kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice] but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pf->lag_mutex){+.+.}-{3:3}: __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_vc_cfg_qs_msg+0x45/0x690 [ice] ice_vc_process_vf_msg+0x4f5/0x870 [ice] __ice_clean_ctrlq+0x2b5/0x600 [ice] ice_service_task+0x2c9/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 -> #0 (&vf->cfg_lock){+.+.}-{3:3}: check_prev_add+0xe2/0xc50 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_reset_vf+0x22f/0x4d0 [ice] ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pf->lag_mutex); lock(&vf->cfg_lock); lock(&pf->lag_mutex); lock(&vf->cfg_lock); *** DEADLOCK *** 4 locks held by kworker/60:3/6771: #0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice] #3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] stack backtrace: CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 #54 Hardware name: Workqueue: ice ice_service_task [ice] Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x12d/0x150 check_prev_add+0xe2/0xc50 ? save_trace+0x59/0x230 ? add_chain_cache+0x109/0x450 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 ? lockdep_hardirqs_on+0x7d/0x100 lock_acquire+0xd4/0x2d0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? lock_is_held_type+0xc7/0x120 __mutex_lock+0x9b/0xbf0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? ice_reset_vf+0x22f/0x4d0 [ice] ? rcu_is_watching+0x11/0x50 ? ice_reset_vf+0x22f/0x4d0 [ice] ice_reset_vf+0x22f/0x4d0 [ice] ? process_one_work+0x176/0x4d0 ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x104/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> To avoid deadlock, we must acquire the LAG ---truncated--- | 2024-05-20 | not yet calculated | CVE-2024-36003 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: i40e: Do not use WQ_MEM_RECLAIM flag for workqueue Issue reported by customer during SRIOV testing, call trace: When both i40e and the i40iw driver are loaded, a warning in check_flush_dependency is being triggered. This seems to be because of the i40e driver workqueue is allocated with the WQ_MEM_RECLAIM flag, and the i40iw one is not. Similar error was encountered on ice too and it was fixed by removing the flag. Do the same for i40e too. [Feb 9 09:08] ------------[ cut here ]------------ [ +0.000004] workqueue: WQ_MEM_RECLAIM i40e:i40e_service_task [i40e] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000060] WARNING: CPU: 0 PID: 937 at kernel/workqueue.c:2966 check_flush_dependency+0x10b/0x120 [ +0.000007] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_timer snd_seq_device snd soundcore nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm cifs_md4 dns_resolver netfs qrtr rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common irdma intel_uncore_frequency intel_uncore_frequency_common ice ipmi_ssif isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp gnss coretemp ib_uverbs rapl intel_cstate ib_core iTCO_wdt iTCO_vendor_support acpi_ipmi mei_me ipmi_si intel_uncore ioatdma i2c_i801 joydev pcspkr mei ipmi_devintf lpc_ich intel_pch_thermal i2c_smbus ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c ast sd_mod drm_shmem_helper t10_pi drm_kms_helper sg ixgbe drm i40e ahci crct10dif_pclmul libahci crc32_pclmul igb crc32c_intel libata ghash_clmulni_intel i2c_algo_bit mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod fuse [ +0.000050] CPU: 0 PID: 937 Comm: kworker/0:3 Kdump: loaded Not tainted 6.8.0-rc2-Feb-net_dev-Qiueue-00279-gbd43c5687e05 #1 [ +0.000003] Hardware name: Intel Corporation S2600BPB/S2600BPB, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 [ +0.000001] Workqueue: i40e i40e_service_task [i40e] [ +0.000024] RIP: 0010:check_flush_dependency+0x10b/0x120 [ +0.000003] Code: ff 49 8b 54 24 18 48 8d 8b b0 00 00 00 49 89 e8 48 81 c6 b0 00 00 00 48 c7 c7 b0 97 fa 9f c6 05 8a cc 1f 02 01 e8 35 b3 fd ff <0f> 0b e9 10 ff ff ff 80 3d 78 cc 1f 02 00 75 94 e9 46 ff ff ff 90 [ +0.000002] RSP: 0018:ffffbd294976bcf8 EFLAGS: 00010282 [ +0.000002] RAX: 0000000000000000 RBX: ffff94d4c483c000 RCX: 0000000000000027 [ +0.000001] RDX: ffff94d47f620bc8 RSI: 0000000000000001 RDI: ffff94d47f620bc0 [ +0.000001] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffff7fff [ +0.000001] R10: ffffbd294976bb98 R11: ffffffffa0be65e8 R12: ffff94c5451ea180 [ +0.000001] R13: ffff94c5ab5e8000 R14: ffff94c5c20b6e05 R15: ffff94c5f1330ab0 [ +0.000001] FS: 0000000000000000(0000) GS:ffff94d47f600000(0000) knlGS:0000000000000000 [ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007f9e6f1fca70 CR3: 0000000038e20004 CR4: 00000000007706f0 [ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] ? __warn+0x80/0x130 [ +0.000003] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? report_bug+0x195/0x1a0 [ +0.000005] ? handle_bug+0x3c/0x70 [ +0.000003] ? exc_invalid_op+0x14/0x70 [ +0.000002] ? asm_exc_invalid_op+0x16/0x20 [ +0.000006] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? check_flush_dependency+0x10b/0x120 [ +0.000002] __flush_workqueue+0x126/0x3f0 [ +0.000015] ib_cache_cleanup_one+0x1c/0xe0 [ib_core] [ +0.000056] __ib_unregister_device+0x6a/0xb0 [ib_core] [ +0.000023] ib_unregister_device_and_put+0x34/0x50 [ib_core] [ +0.000020] i40iw_close+0x4b/0x90 [irdma] [ +0.000022] i40e_notify_client_of_netdev_close+0x54/0xc0 [i40e] [ +0.000035] i40e_service_task+0x126/0x190 [i40e] [ +0.000024] process_one_work+0x174/0x340 [ +0.000003] worker_th ---truncated--- | 2024-05-20 | not yet calculated | CVE-2024-36004 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: honor table dormant flag from netdev release event path Check for table dormant flag otherwise netdev release event path tries to unregister an already unregistered hook. [524854.857999] ------------[ cut here ]------------ [524854.858010] WARNING: CPU: 0 PID: 3386599 at net/netfilter/core.c:501 __nf_unregister_net_hook+0x21a/0x260 [...] [524854.858848] CPU: 0 PID: 3386599 Comm: kworker/u32:2 Not tainted 6.9.0-rc3+ #365 [524854.858869] Workqueue: netns cleanup_net [524854.858886] RIP: 0010:__nf_unregister_net_hook+0x21a/0x260 [524854.858903] Code: 24 e8 aa 73 83 ff 48 63 43 1c 83 f8 01 0f 85 3d ff ff ff e8 98 d1 f0 ff 48 8b 3c 24 e8 8f 73 83 ff 48 63 43 1c e9 26 ff ff ff <0f> 0b 48 83 c4 18 48 c7 c7 00 68 e9 82 5b 5d 41 5c 41 5d 41 5e 41 [524854.858914] RSP: 0018:ffff8881e36d79e0 EFLAGS: 00010246 [524854.858926] RAX: 0000000000000000 RBX: ffff8881339ae790 RCX: ffffffff81ba524a [524854.858936] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881c8a16438 [524854.858945] RBP: ffff8881c8a16438 R08: 0000000000000001 R09: ffffed103c6daf34 [524854.858954] R10: ffff8881e36d79a7 R11: 0000000000000000 R12: 0000000000000005 [524854.858962] R13: ffff8881c8a16000 R14: 0000000000000000 R15: ffff8881351b5a00 [524854.858971] FS: 0000000000000000(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [524854.858982] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [524854.858991] CR2: 00007fc9be0f16f4 CR3: 00000001437cc004 CR4: 00000000001706f0 [524854.859000] Call Trace: [524854.859006] <TASK> [524854.859013] ? __warn+0x9f/0x1a0 [524854.859027] ? __nf_unregister_net_hook+0x21a/0x260 [524854.859044] ? report_bug+0x1b1/0x1e0 [524854.859060] ? handle_bug+0x3c/0x70 [524854.859071] ? exc_invalid_op+0x17/0x40 [524854.859083] ? asm_exc_invalid_op+0x1a/0x20 [524854.859100] ? __nf_unregister_net_hook+0x6a/0x260 [524854.859116] ? __nf_unregister_net_hook+0x21a/0x260 [524854.859135] nf_tables_netdev_event+0x337/0x390 [nf_tables] [524854.859304] ? __pfx_nf_tables_netdev_event+0x10/0x10 [nf_tables] [524854.859461] ? packet_notifier+0xb3/0x360 [524854.859476] ? _raw_spin_unlock_irqrestore+0x11/0x40 [524854.859489] ? dcbnl_netdevice_event+0x35/0x140 [524854.859507] ? __pfx_nf_tables_netdev_event+0x10/0x10 [nf_tables] [524854.859661] notifier_call_chain+0x7d/0x140 [524854.859677] unregister_netdevice_many_notify+0x5e1/0xae0 | 2024-05-20 | not yet calculated | CVE-2024-36005 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix incorrect list API usage Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 #39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> | 2024-05-20 | not yet calculated | CVE-2024-36006 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_tcam: Fix warning during rehash As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> | 2024-05-20 | not yet calculated | CVE-2024-36007 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ax25: Fix netdev refcount issue The dev_tracker is added to ax25_cb in ax25_bind(). When the ax25 device is detaching, the dev_tracker of ax25_cb should be deallocated in ax25_kill_by_device() instead of the dev_tracker of ax25_dev. The log reported by ref_tracker is shown below: [ 80.884935] ref_tracker: reference already released. [ 80.885150] ref_tracker: allocated in: [ 80.885349] ax25_dev_device_up+0x105/0x540 [ 80.885730] ax25_device_event+0xa4/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] __dev_notify_flags+0x138/0x280 [ 80.885730] dev_change_flags+0xd7/0x180 [ 80.885730] dev_ifsioc+0x6a9/0xa30 [ 80.885730] dev_ioctl+0x4d8/0xd90 [ 80.885730] sock_do_ioctl+0x1c2/0x2d0 [ 80.885730] sock_ioctl+0x38b/0x4f0 [ 80.885730] __se_sys_ioctl+0xad/0xf0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.885730] ref_tracker: freed in: [ 80.885730] ax25_device_event+0x272/0x420 [ 80.885730] notifier_call_chain+0xc9/0x1e0 [ 80.885730] dev_close_many+0x272/0x370 [ 80.885730] unregister_netdevice_many_notify+0x3b5/0x1180 [ 80.885730] unregister_netdev+0xcf/0x120 [ 80.885730] sixpack_close+0x11f/0x1b0 [ 80.885730] tty_ldisc_kill+0xcb/0x190 [ 80.885730] tty_ldisc_hangup+0x338/0x3d0 [ 80.885730] __tty_hangup+0x504/0x740 [ 80.885730] tty_release+0x46e/0xd80 [ 80.885730] __fput+0x37f/0x770 [ 80.885730] __x64_sys_close+0x7b/0xb0 [ 80.885730] do_syscall_64+0xc4/0x1b0 [ 80.885730] entry_SYSCALL_64_after_hwframe+0x67/0x6f [ 80.893739] ------------[ cut here ]------------ [ 80.894030] WARNING: CPU: 2 PID: 140 at lib/ref_tracker.c:255 ref_tracker_free+0x47b/0x6b0 [ 80.894297] Modules linked in: [ 80.894929] CPU: 2 PID: 140 Comm: ax25_conn_rel_6 Not tainted 6.9.0-rc4-g8cd26fd90c1a #11 [ 80.895190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qem4 [ 80.895514] RIP: 0010:ref_tracker_free+0x47b/0x6b0 [ 80.895808] Code: 83 c5 18 4c 89 eb 48 c1 eb 03 8a 04 13 84 c0 0f 85 df 01 00 00 41 83 7d 00 00 75 4b 4c 89 ff 9 [ 80.896171] RSP: 0018:ffff888009edf8c0 EFLAGS: 00000286 [ 80.896339] RAX: 1ffff1100141ac00 RBX: 1ffff1100149463b RCX: dffffc0000000000 [ 80.896502] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff88800a0d6518 [ 80.896925] RBP: ffff888009edf9b0 R08: ffff88806d3288d3 R09: 1ffff1100da6511a [ 80.897212] R10: dffffc0000000000 R11: ffffed100da6511b R12: ffff88800a4a31d4 [ 80.897859] R13: ffff88800a4a31d8 R14: dffffc0000000000 R15: ffff88800a0d6518 [ 80.898279] FS: 00007fd88b7fe700(0000) GS:ffff88806d300000(0000) knlGS:0000000000000000 [ 80.899436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 80.900181] CR2: 00007fd88c001d48 CR3: 000000000993e000 CR4: 00000000000006f0 ... [ 80.935774] ref_tracker: sp%d@000000000bb9df3d has 1/1 users at [ 80.935774] ax25_bind+0x424/0x4e0 [ 80.935774] __sys_bind+0x1d9/0x270 [ 80.935774] __x64_sys_bind+0x75/0x80 [ 80.935774] do_syscall_64+0xc4/0x1b0 [ 80.935774] entry_SYSCALL_64_after_hwframe+0x67/0x6f Change ax25_dev->dev_tracker to the dev_tracker of ax25_cb in order to mitigate the bug. | 2024-05-20 | not yet calculated | CVE-2024-36009 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: igb: Fix string truncation warnings in igb_set_fw_version Commit 1978d3ead82c ("intel: fix string truncation warnings") fixes '-Wformat-truncation=' warnings in igb_main.c by using kasprintf. drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning?'%d' directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=] 3092 | "%d.%d, 0x%08x, %d.%d.%d", | ^~ drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note?directive argument in the range [0, 65535] 3092 | "%d.%d, 0x%08x, %d.%d.%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note?directive argument in the range [0, 65535] drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note?'snprintf' output between 23 and 43 bytes into a destination of size 32 kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fix this warning by using a larger space for adapter->fw_version, and then fall back and continue to use snprintf. | 2024-05-22 | not yet calculated | CVE-2024-36010 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Fix potential null-ptr-deref Fix potential null-ptr-deref in hci_le_big_sync_established_evt(). | 2024-05-23 | not yet calculated | CVE-2024-36011 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: msft: fix slab-use-after-free in msft_do_close() Tying the msft->data lifetime to hdev by freeing it in hci_release_dev() to fix the following case: [use] msft_do_close() msft = hdev->msft_data; if (!msft) ...(1) <- passed. return; mutex_lock(&msft->filter_lock); ...(4) <- used after freed. [free] msft_unregister() msft = hdev->msft_data; hdev->msft_data = NULL; ...(2) kfree(msft); ...(3) <- msft is freed. ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30 kernel/locking/mutex.c:752 Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309 | 2024-05-23 | not yet calculated | CVE-2024-36012 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect() Extend a critical section to prevent chan from early freeing. Also make the l2cap_connect() return type void. Nothing is using the returned value but it is ugly to return a potentially freed pointer. Making it void will help with backports because earlier kernels did use the return value. Now the compile will break for kernels where this patch is not a complete fix. Call stack summary: [use] l2cap_bredr_sig_cmd l2cap_connect ┌ mutex_lock(&conn->chan_lock); │ chan = pchan->ops->new_connection(pchan); <- alloc chan │ __l2cap_chan_add(conn, chan); │ l2cap_chan_hold(chan); │ list_add(&chan->list, &conn->chan_l); ... (1) └ mutex_unlock(&conn->chan_lock); chan->conf_state ... (4) <- use after free [free] l2cap_conn_del ┌ mutex_lock(&conn->chan_lock); │ foreach chan in conn->chan_l: ... (2) │ l2cap_chan_put(chan); │ l2cap_chan_destroy │ kfree(chan) ... (3) <- chan freed └ mutex_unlock(&conn->chan_lock); ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: slab-use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0 net/bluetooth/l2cap_core.c:4260 Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311 | 2024-05-23 | not yet calculated | CVE-2024-36013 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| M-Files Corporation--Hubshare | Stored Cross-Site Scripting vulnerability in Social Module in M-Files Hubshare before version 5.0.3.8 allows authenticated attacker to run scripts in other users browser | 2024-05-24 | not yet calculated | CVE-2024-5142 security@m-files.com |
| NETGEAR--ProSAFE Network Management System | NETGEAR ProSAFE Network Management System Default Credentials Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of NETGEAR ProSAFE Network Management System. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the product installer. The issue results from the use of default MySQL credentials. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-22755. | 2024-05-23 | not yet calculated | CVE-2024-5245 zdi-disclosures@trendmicro.com zdi-disclosures@trendmicro.com |
| NETGEAR--ProSAFE Network Management System | NETGEAR ProSAFE Network Management System Tomcat Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Authentication is required to exploit this vulnerability. The specific flaw exists within the product installer. The issue results from the use of a vulnerable version of Apache Tomcat. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-22868. | 2024-05-23 | not yet calculated | CVE-2024-5246 zdi-disclosures@trendmicro.com zdi-disclosures@trendmicro.com |
| NETGEAR--ProSAFE Network Management System | NETGEAR ProSAFE Network Management System UpLoadServlet Unrestricted File Upload Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Authentication is required to exploit this vulnerability. The specific flaw exists within the UpLoadServlet class. The issue results from the lack of proper validation of user-supplied data, which can allow the upload of arbitrary files. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-22923. | 2024-05-23 | not yet calculated | CVE-2024-5247 zdi-disclosures@trendmicro.com zdi-disclosures@trendmicro.com |
| Sante--PACS Server PG | Sante PACS Server PG Patient Query SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Sante PACS Server PG. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the DICOM service, which listens on TCP port 11122 by default. When parsing the NAME element of the PATIENT record, the process does not properly validate a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of NETWORK SERVICE. Was ZDI-CAN-21579. | 2024-05-22 | not yet calculated | CVE-2023-51637 zdi-disclosures@trendmicro.com |
| TECNO--com.transsion.videocallenhancer | The mobile application (com.transsion.videocallenhancer) interface has improper permission control, which can lead to the risk of private file leakage. | 2024-05-21 | not yet calculated | CVE-2024-4988 907edf6c-bf03-423e-ab1a-8da27e1aa1ea 907edf6c-bf03-423e-ab1a-8da27e1aa1ea |
| TP-Link --TP-Link Tether | TP-Link Tether versions prior to 4.5.13 and TP-Link Tapo versions prior to 3.3.6 do not properly validate certificates, which may allow a remote unauthenticated attacker to eavesdrop on an encrypted communication via a man-in-the-middle attack. | 2024-05-22 | not yet calculated | CVE-2024-31340 vultures@jpcert.or.jp vultures@jpcert.or.jp vultures@jpcert.or.jp |
| TP-Link--Omada ER605 | TP-Link Omada ER605 PPTP VPN username Command Injection Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. However, devices are only vulnerable if configured to use a PPTP VPN with LDAP authentication. The specific flaw exists within the handling of the username parameter provided to the /usr/bin/pppd endpoint. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22446. | 2024-05-23 | not yet calculated | CVE-2024-5227 zdi-disclosures@trendmicro.com |
| TP-Link--Omada ER605 | TP-Link Omada ER605 Comexe DDNS Response Handling Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. However, devices are vulnerable only if configured to use the Comexe DDNS service. The specific flaw exists within the handling of DNS responses. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22383. | 2024-05-23 | not yet calculated | CVE-2024-5228 zdi-disclosures@trendmicro.com |
| TP-Link--Omada ER605 | TP-Link Omada ER605 Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. However, devices are vulnerable only if configured to use the Comexe DDNS service. The specific flaw exists within the handling of DDNS error codes. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22522. | 2024-05-23 | not yet calculated | CVE-2024-5242 zdi-disclosures@trendmicro.com |
| TP-Link--Omada ER605 | TP-Link Omada ER605 Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. However, devices are vulnerable only if configured to use the Comexe DDNS service. The specific flaw exists within the handling of DNS names. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-22523. | 2024-05-23 | not yet calculated | CVE-2024-5243 zdi-disclosures@trendmicro.com |
| TP-Link--Omada ER605 | TP-Link Omada ER605 Reliance on Security Through Obscurity Vulnerability. This vulnerability allows network-adjacent attackers to access or spoof DDNS messages on affected installations of TP-Link Omada ER605 routers. Authentication is not required to exploit this vulnerability. However, devices are vulnerable only if configured to use the Comexe DDNS service. The specific flaw exists within the cmxddnsd executable. The issue results from reliance on obscurity to secure network data. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-22439. | 2024-05-23 | not yet calculated | CVE-2024-5244 zdi-disclosures@trendmicro.com |
| Unknown--All in One SEO | The All in One SEO WordPress plugin before 4.6.1.1 does not validate and escape some of its Post fields before outputting them back, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks | 2024-05-20 | not yet calculated | CVE-2024-3368 contact@wpscan.com |
| Unknown--Button contact VR | The Button contact VR WordPress plugin through 4.7 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup) | 2024-05-23 | not yet calculated | CVE-2024-2220 contact@wpscan.com |
| Unknown--Carousel Slider | The Carousel Slider WordPress plugin before 2.2.11 does not sanitise and escape some parameters, which could allow users with a role as low as editor to perform Cross-Site Scripting attacks | 2024-05-21 | not yet calculated | CVE-2024-4372 contact@wpscan.com |
| Unknown--Flattr | The Flattr WordPress plugin through 1.2.2 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup) | 2024-05-23 | not yet calculated | CVE-2024-3920 contact@wpscan.com |
| Unknown--IDonate | The IDonate WordPress plugin through 1.9.0 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup) | 2024-05-23 | not yet calculated | CVE-2024-3594 contact@wpscan.com |
| Unknown--Pet Manager | The Pet Manager WordPress plugin through 1.4 does not sanitise and escape a parameter before outputting it back in the page, leading to a Reflected Cross-Site Scripting which could be used against high privilege users such as admin | 2024-05-23 | not yet calculated | CVE-2024-3917 contact@wpscan.com |
| Unknown--Pet Manager | The Pet Manager WordPress plugin through 1.4 does not sanitise and escape some of its Pet settings, which could allow high privilege users such as Contributor to perform Stored Cross-Site Scripting attacks. | 2024-05-23 | not yet calculated | CVE-2024-3918 contact@wpscan.com |
| Unknown--Sailthru Triggermail | The Sailthru Triggermail WordPress plugin through 1.1 does not sanitise and escape various parameters before outputting them back in pages and attributes, leading to a Reflected Cross-Site Scripting which could be used against high privilege users such as admin | 2024-05-21 | not yet calculated | CVE-2024-4289 contact@wpscan.com |
| Unknown--Sailthru Triggermail | The Sailthru Triggermail WordPress plugin through 1.1 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup) | 2024-05-21 | not yet calculated | CVE-2024-4290 contact@wpscan.com |
| Unknown--Social Icons Widget & Block by WPZOOM | The Social Icons Widget & Block by WPZOOM WordPress plugin before 4.2.18 does not sanitise and escape some of its Widget settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup) | 2024-05-21 | not yet calculated | CVE-2024-2189 contact@wpscan.com |
| Unknown--Survey Maker | The Survey Maker WordPress plugin before 4.2.9 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup) | 2024-05-21 | not yet calculated | CVE-2024-4061 contact@wpscan.com |
| Unknown--cas | This does not validate a path generated with user input when downloading files, allowing unauthenticated user to download arbitrary files from the server | 2024-05-23 | not yet calculated | CVE-2024-4388 contact@wpscan.com |
| Unknown--cas | The does not validate a parameter before making a request to it, which could allow unauthenticated users to perform SSRF attack | 2024-05-23 | not yet calculated | CVE-2024-4399 contact@wpscan.com |
| Veeam--Agent for Windows | An authentication bypass vulnerability in Veeam Agent for Microsoft Windows allows for local privilege escalation. | 2024-05-22 | not yet calculated | CVE-2024-29853 support@hackerone.com |
| Veeam--Backup & Replication | Veeam Backup Enterprise Manager allows unauthenticated users to log in as any user to enterprise manager web interface. | 2024-05-22 | not yet calculated | CVE-2024-29849 support@hackerone.com |
| Veeam--Backup & Replication | Veeam Backup Enterprise Manager allows account takeover via NTLM relay. | 2024-05-22 | not yet calculated | CVE-2024-29850 support@hackerone.com |
| Veeam--Backup & Replication | Veeam Backup Enterprise Manager allows high-privileged users to steal NTLM hash of Enterprise manager service account. | 2024-05-22 | not yet calculated | CVE-2024-29851 support@hackerone.com |
| Veeam--Backup & Replication | Veeam Backup Enterprise Manager allows high-privileged users to read backup session logs. | 2024-05-22 | not yet calculated | CVE-2024-29852 support@hackerone.com |
| WPFactory LLC--Download Plugins and Themes from Dashboard | Path traversal vulnerability exists in Download Plugins and Themes from Dashboard versions prior to 1.8.6. If this vulnerability is exploited, a remote authenticated attacker with "switch_themes" privilege may obtain arbitrary files on the server. | 2024-05-22 | not yet calculated | CVE-2024-35162 vultures@jpcert.or.jp vultures@jpcert.or.jp |
| WithSecure--Elements | WithSecure Elements Endpoint Protection Link Following Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of WithSecure Elements Endpoint Protection. User interaction on the part of an administrator is required to exploit this vulnerability. The specific flaw exists within the WithSecure plugin hosting service. By creating a symbolic link, an attacker can abuse the service to create a file. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-23035. | 2024-05-22 | not yet calculated | CVE-2024-4454 zdi-disclosures@trendmicro.com |
| appleple inc.--a-blog cms Ver.3.1.x series | Cross-site scripting vulnerability exists in a-blog cms Ver.3.1.x series versions prior to Ver.3.1.12, Ver.3.0.x series versions prior to Ver.3.0.32, Ver.2.11.x series versions prior to Ver.2.11.61, Ver.2.10.x series versions prior to Ver.2.10.53, and Ver.2.9 and earlier versions. If this vulnerability is exploited, a user with a contributor or higher privilege who can log in to the product may execute an arbitrary script on the web browser of the user who accessed the website using the product. | 2024-05-22 | not yet calculated | CVE-2024-30419 vultures@jpcert.or.jp vultures@jpcert.or.jp |
| appleple inc.--a-blog cms Ver.3.1.x series | Server-side request forgery (SSRF) vulnerability exists in a-blog cms Ver.3.1.x series versions prior to Ver.3.1.12 and Ver.3.0.x series versions prior to Ver.3.0.32. If this vulnerability is exploited, a user with an administrator or higher privilege who can log in to the product may obtain arbitrary files on the server and information on the internal server that is not disclosed to the public. | 2024-05-22 | not yet calculated | CVE-2024-30420 vultures@jpcert.or.jp vultures@jpcert.or.jp |
| appleple inc.--a-blog cms Ver.3.1.x series | Directory traversal vulnerability exists in a-blog cms Ver.3.1.x series versions prior to Ver.3.1.12, Ver.3.0.x series versions prior to Ver.3.0.32, Ver.2.11.x series versions prior to Ver.2.11.61, Ver.2.10.x series versions prior to Ver.2.10.53, and Ver.2.9 and earlier versions. If this vulnerability is exploited, a user with an editor or higher privilege who can log in to the product may obtain arbitrary files on the server. | 2024-05-22 | not yet calculated | CVE-2024-31394 vultures@jpcert.or.jp vultures@jpcert.or.jp |
| appleple inc.--a-blog cms Ver.3.1.x series | Cross-site scripting vulnerability exists in a-blog cms Ver.3.1.x series versions prior to Ver.3.1.12, Ver.3.0.x series versions prior to Ver.3.0.32, Ver.2.11.x series versions prior to Ver.2.11.61, Ver.2.10.x series versions prior to Ver.2.10.53, and Ver.2.9 and earlier versions. If this vulnerability is exploited, a user with an editor or higher privilege who can log in to the product may execute an arbitrary script on the web browser of the user who accessed the schedule management page. | 2024-05-22 | not yet calculated | CVE-2024-31395 vultures@jpcert.or.jp vultures@jpcert.or.jp |
| appleple inc.--a-blog cms Ver.3.1.x series | Code injection vulnerability exists in a-blog cms Ver.3.1.x series versions prior to Ver.3.1.12 and Ver.3.0.x series versions prior to Ver.3.0.32. If this vulnerability is exploited, a user with an administrator or higher privilege who can log in to the product may execute an arbitrary command on the server. | 2024-05-22 | not yet calculated | CVE-2024-31396 vultures@jpcert.or.jp vultures@jpcert.or.jp |
| i-plug inc.--'OfferBox' App for Android | 'OfferBox' App for Android versions 2.0.0 to 2.3.17 and 'OfferBox' App for iOS versions 2.1.7 to 2.6.14 use a hard-coded secret key for JWT. Secret key for JWT may be retrieved if the application binary is reverse-engineered. | 2024-05-22 | not yet calculated | CVE-2024-32988 vultures@jpcert.or.jp |
| lighttpd--lighttpd | A condition exists in lighttpd version prior to 1.4.51 whereby a remote attacker can craft an http request which could result in multiple outcomes: 1.) cause lighttpd to access freed memory in which case the process lighttpd is running in could be terminated or other non-deterministic behavior could result 2.) a memory information disclosure event could result which could be used to determine the state of memory which could then be used to theoretically bypass ALSR protections This CVE will be updated with more details on July 9th, 2024 after affected parties have had time to remediate. | 2024-05-23 | not yet calculated | CVE-2024-3708 biossecurity@ami.com |
| lunary-ai--lunary-ai/lunary | In lunary-ai/lunary version 1.2.2, the DELETE endpoint located at `packages/backend/src/api/v1/datasets` is vulnerable to unauthorized dataset deletion due to missing authorization and authentication mechanisms. This vulnerability allows any user, even those without a valid token, to delete a dataset by sending a DELETE request to the endpoint. The issue was fixed in version 1.2.8. The impact of this vulnerability is significant as it permits unauthorized users to delete datasets, potentially leading to data loss or disruption of service. | 2024-05-20 | not yet calculated | CVE-2024-3761 security@huntr.dev security@huntr.dev |
| lunary-ai--lunary-ai/lunary | An Improper Access Control vulnerability exists in lunary-ai/lunary version 1.2.2, where users can view and update any prompts in any projects due to insufficient access control checks in the handling of PATCH and GET requests for template versions. This vulnerability allows unauthorized users to manipulate or access sensitive project data, potentially leading to data integrity and confidentiality issues. | 2024-05-20 | not yet calculated | CVE-2024-4151 security@huntr.dev |
| lunary-ai--lunary-ai/lunary | A vulnerability in lunary-ai/lunary version 1.2.2 allows attackers to bypass user creation limits and potentially evade payment requirements. The issue arises from an undefined behavior when handling input to the API, specifically through a POST request to the /v1/users endpoint. By crafting a request with a new user's email and assigning them an 'admin' role, attackers can invite additional users beyond the set limit. This vulnerability could be exploited to add an unlimited number of users without adhering to the intended restrictions. | 2024-05-22 | not yet calculated | CVE-2024-4153 security@huntr.dev |
| lunary-ai--lunary-ai/lunary | In lunary-ai/lunary version 1.2.2, an incorrect synchronization vulnerability allows unprivileged users to rename projects they do not have access to. Specifically, an unprivileged user can send a PATCH request to the project's endpoint with a new name for a project, despite not having the necessary permissions or being assigned to the project. This issue allows for unauthorized modification of project names, potentially leading to confusion or unauthorized access to project resources. | 2024-05-21 | not yet calculated | CVE-2024-4154 security@huntr.dev |
| mintplex-labs--mintplex-labs/anything-llm | In mintplex-labs/anything-llm, a vulnerability exists due to improper input validation in the workspace update process. Specifically, the application fails to validate or format JSON data sent in an HTTP POST request to `/api/workspace/:workspace-slug/update`, allowing it to be executed as part of a database query without restrictions. This flaw enables users with a manager role to craft a request that includes nested write operations, effectively allowing them to create new Administrator accounts. | 2024-05-20 | not yet calculated | CVE-2024-4287 security@huntr.dev security@huntr.dev |
| n/a--n/a | An infinite loop in the retrieveActiveBody function of Soot before v4.4.1 under Java 8 allows attackers to cause a Denial of Service (DoS). | 2024-05-24 | not yet calculated | CVE-2023-46442 cve@mitre.org cve@mitre.org |
| n/a--n/a | Kwik commit 745fd4e2 does not discard unused encryption keys. | 2024-05-24 | not yet calculated | CVE-2024-22588 cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | A Prototype Pollution issue in MiguelCastillo @bit/loader v.10.0.3 allows an attacker to execute arbitrary code via the M function e argument in index.js. | 2024-05-20 | not yet calculated | CVE-2024-24293 cve@mitre.org |
| n/a--n/a | A Prototype Pollution issue in Blackprint @blackprint/engine v.0.9.0 allows an attacker to execute arbitrary code via the _utils.setDeepProperty function of engine.min.js. | 2024-05-20 | not yet calculated | CVE-2024-24294 cve@mitre.org |
| n/a--n/a | A Server-Side Request Forgery (SSRF) vulnerability in the /Cover/Show route (showAction in CoverController.php) in Open Library Foundation VuFind 2.4 through 9.1 before 9.1.1 allows remote attackers to access internal HTTP servers and perform Cross-Site Scripting (XSS) attacks by proxying arbitrary URLs via the proxy GET parameter. | 2024-05-22 | not yet calculated | CVE-2024-25737 cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | A Server-Side Request Forgery (SSRF) vulnerability in the /Upgrade/FixConfig route in Open Library Foundation VuFind 2.0 through 9.1 before 9.1.1 allows a remote attacker to overwrite local configuration files to gain access to the administrator panel and achieve Remote Code Execution. A mitigating factor is that it requires the allow_url_include PHP runtime setting to be on, which is off in default installations. It also requires the /Upgrade route to be exposed, which is exposed by default after installing VuFind, and is recommended to be disabled by setting autoConfigure to false in config.ini. | 2024-05-22 | not yet calculated | CVE-2024-25738 cve@mitre.org |
| n/a--n/a | Silverpeas Core 6.3 is vulnerable to Cross Site Scripting (XSS) via ClipboardSessionController. | 2024-05-22 | not yet calculated | CVE-2024-29392 cve@mitre.org |
| n/a--n/a | xmedcon 0.23.0 and fixed in v.0.24.0 is vulnerable to Buffer Overflow via libs/dicom/basic.c which allows an attacker to execute arbitrary code. | 2024-05-22 | not yet calculated | CVE-2024-29421 cve@mitre.org |
| n/a--n/a | A Prototype Pollution issue in API Dev Tools json-schema-ref-parser v.11.0.0 and v.11.1.0 allows a remote attacker to execute arbitrary code via the bundle()`, `parse()`, `resolve()`, `dereference() functions. | 2024-05-20 | not yet calculated | CVE-2024-29651 cve@mitre.org |
| n/a--n/a | An issue in Open Quantum Safe liboqs v.10.0 allows a remote attacker to escalate privileges via the crypto_sign_signature parameter in the /pqcrystals-dilithium-standard_ml-dsa-44-ipd_avx2/sign.c component. | 2024-05-24 | not yet calculated | CVE-2024-31510 cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | OpenLiteSpeed before 1.8.1 mishandles chunked encoding. | 2024-05-22 | not yet calculated | CVE-2024-31617 cve@mitre.org |
| n/a--n/a | Buffer Overflow vulnerability in Waxlab wax v.0.9-3 and before allows an attacker to cause a denial of service via the Lua library component. | 2024-05-20 | not yet calculated | CVE-2024-31714 cve@mitre.org |
| n/a--n/a | An issue in MarvinTest Solutions Hardware Access Driver v.5.0.3.0 and before and fixed in v.5.0.4.0 allows a local attacker to escalate privileges via the Hw65.sys component. | 2024-05-21 | not yet calculated | CVE-2024-31756 cve@mitre.org |
| n/a--n/a | An issue in TeraByte Unlimited Image for Windows v.3.64.0.0 and before and fixed in v.4.0.0.0 allows a local attacker to escalate privileges via the TBOFLHelper64.sys and TBOFLHelper.sys component. | 2024-05-21 | not yet calculated | CVE-2024-31757 cve@mitre.org |
| n/a--n/a | An issue was discovered in Italtel Embrace 1.6.4. The web application inserts cleartext passwords in the HTML source code. An authenticated user is able to edit the configuration of the email server. Once the user access the edit function, the web application fills the edit form with the current credentials for the email account, including the cleartext password. | 2024-05-21 | not yet calculated | CVE-2024-31840 cve@mitre.org |
| n/a--n/a | An issue was discovered in Italtel Embrace 1.6.4. The Web application does not properly check the parameters sent as input before they are processed on the server side. This allows authenticated users to execute commands on the Operating System. | 2024-05-23 | not yet calculated | CVE-2024-31843 cve@mitre.org |
| n/a--n/a | An issue was discovered in Italtel Embrace 1.6.4. The server does not properly handle application errors. In some cases, this leads to a disclosure of information about the server. An unauthenticated user is able craft specific requests in order to make the application generate an error. Inside an error message, some information about the server is revealed, such as the absolute path of the source code of the application. This kind of information can help an attacker to perform other attacks against the system. This can be exploited without authentication. | 2024-05-21 | not yet calculated | CVE-2024-31844 cve@mitre.org |
| n/a--n/a | An issue was discovered in Italtel Embrace 1.6.4. The product does not neutralize or incorrectly neutralizes output that is written to logs. The web application writes logs using a GET query string parameter. This parameter can be modified by an attacker, so that every action he performs is attributed to a different user. This can be exploited without authentication. | 2024-05-21 | not yet calculated | CVE-2024-31845 cve@mitre.org |
| n/a--n/a | An issue was discovered in Italtel Embrace 1.6.4. A stored cross-site scripting (XSS) vulnerability allows authenticated and unauthenticated remote attackers to inject arbitrary web script or HTML into a GET parameter. This reflects/stores the user input without sanitization. | 2024-05-21 | not yet calculated | CVE-2024-31847 cve@mitre.org |
| n/a--n/a | An issue in the component AsUpIO64.sys of ASUSTeK Computer Inc ASUS USB 3.0 Boost Storage Driver 5.30.20.0 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33218 cve@mitre.org |
| n/a--n/a | An issue in the component AsIO64.sys of ASUSTeK Computer Inc ASUS SABERTOOTH X99 Driver v1.0.1.0 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33219 cve@mitre.org |
| n/a--n/a | An issue in the component AslO3_64.sys of ASUSTeK Computer Inc AISuite3 v3.03.36 3.03.36 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33220 cve@mitre.org |
| n/a--n/a | An issue in the component AsusBSItf.sys of ASUSTeK Computer Inc ASUS BIOS Flash Driver v3.2.12.0 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33221 cve@mitre.org |
| n/a--n/a | An issue in the component ATSZIO64.sys of ASUSTeK Computer Inc ASUS ATSZIO Driver v0.2.1.7 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33222 cve@mitre.org |
| n/a--n/a | An issue in the component IOMap64.sys of ASUSTeK Computer Inc ASUS GPU TweakII v1.4.5.2 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33223 cve@mitre.org |
| n/a--n/a | An issue in the component rtkio64.sys of Realtek Semiconductor Corp Realtek lO Driver v1.008.0823.2017 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33224 cve@mitre.org |
| n/a--n/a | An issue in the component RTKVHD64.sys of Realtek Semiconductor Corp Realtek(r) High Definition Audio Function Driver v6.0.9549.1 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33225 cve@mitre.org |
| n/a--n/a | An issue in the component Access64.sys of Wistron Corporation TBT Force Power Control v1.0.0.0 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33226 cve@mitre.org |
| n/a--n/a | An issue in the component ddcdrv.sys of Nicomsoft WinI2C/DDC v3.7.4.0 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33227 cve@mitre.org |
| n/a--n/a | An issue in the component segwindrvx64.sys of Insyde Software Corp SEG Windows Driver v100.00.07.02 allows attackers to escalate privileges and execute arbitrary code via sending crafted IOCTL requests. | 2024-05-22 | not yet calculated | CVE-2024-33228 cve@mitre.org |
| n/a--n/a | An issue in the SMTP Email Settings of AVTECH Room Alert 4E v4.4.0 allows attackers to gain access to credentials in plaintext via a passback attack. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | 2024-05-24 | not yet calculated | CVE-2024-33470 cve@mitre.org |
| n/a--n/a | An issue in the Sensor Settings of AVTECH Room Alert 4E v4.4.0 allows attackers to gain access to SMTP credentials in plaintext via a crafted AJAX request. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | 2024-05-24 | not yet calculated | CVE-2024-33471 cve@mitre.org |
| n/a--n/a | A Stored Cross-site Scripting (XSS) vulnerability in the "Import of organizational units and title of organizational unit" feature in ILIAS 7.20 to 7.29 and ILIAS 8.4 to 8.10 as well as ILIAS 9.0 allows remote authenticated attackers with administrative privileges to inject arbitrary web script or HTML via XML file upload. | 2024-05-21 | not yet calculated | CVE-2024-33525 cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | A Stored Cross-site Scripting (XSS) vulnerability in the "Import of user role and title of user role" feature in ILIAS 7 before 7.30 and ILIAS 8 before 8.11 allows remote authenticated attackers with administrative privileges to inject arbitrary web script or HTML via XML file upload. | 2024-05-21 | not yet calculated | CVE-2024-33526 cve@mitre.org cve@mitre.org |
| n/a--n/a | A Stored Cross-site Scripting (XSS) vulnerability in the "Import of Users and login name of user" feature in ILIAS 7 before 7.30 and ILIAS 8 before 8.11 allows remote authenticated attackers with administrative privileges to inject arbitrary web script or HTML via XML file upload. | 2024-05-21 | not yet calculated | CVE-2024-33527 cve@mitre.org cve@mitre.org |
| n/a--n/a | A Stored Cross-site Scripting (XSS) vulnerability in ILIAS 7 before 7.30 and ILIAS 8 before 8.11 allows remote authenticated attackers with tutor privileges to inject arbitrary web script or HTML via XML file upload. | 2024-05-21 | not yet calculated | CVE-2024-33528 cve@mitre.org cve@mitre.org |
| n/a--n/a | ILIAS 7 before 7.30 and ILIAS 8 before 8.11 as well as ILIAS 9.0 allow remote authenticated attackers with administrative privileges to execute operating system commands via file uploads with dangerous types. | 2024-05-21 | not yet calculated | CVE-2024-33529 cve@mitre.org cve@mitre.org |
| n/a--n/a | PingCAP TiDB v7.5.1 was discovered to contain a buffer overflow vulnerability, which could lead to database crashes and denial of service attacks. | 2024-05-24 | not yet calculated | CVE-2024-33809 cve@mitre.org cve@mitre.org |
| n/a--n/a | KeePassXC 2.7.7 allows an attacker (who has the privileges of the victim) to recover cleartext credentials via a memory dump. NOTE: the vendor disputes this because memory-management constraints make this unavoidable in the current design and other realistic designs. | 2024-05-20 | not yet calculated | CVE-2024-33900 cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | Issue in KeePassXC 2.7.7 allows an attacker (who has the privileges of the victim) to recover some passwords stored in the .kdbx database via a memory dump. NOTE: the vendor disputes this because memory-management constraints make this unavoidable in the current design and other realistic designs. | 2024-05-20 | not yet calculated | CVE-2024-33901 cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | smanga 3.2.7 does not filter the file parameter at the PHP/get file flow.php interface, resulting in a path traversal vulnerability that can cause arbitrary file reading. | 2024-05-20 | not yet calculated | CVE-2024-34193 cve@mitre.org |
| n/a--n/a | QDOCS Smart School 7.0.0 is vulnerable to Cross Site Scripting (XSS) resulting in arbitrary code execution in admin functions related to adding or updating records. | 2024-05-21 | not yet calculated | CVE-2024-34240 cve@mitre.org |
| n/a--n/a | OpenBD 20210306203917-6cbe797 is vulnerable to Deserialization of Untrusted Data. The cookies bdglobals and bdclient_spot of the OpenBD software uses serialized data, which can be used to execute arbitrary code on the system. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | 2024-05-21 | not yet calculated | CVE-2024-34274 cve@mitre.org |
| n/a--n/a | Ghost before 5.82.0 allows CSV Injection during a member CSV export. | 2024-05-22 | not yet calculated | CVE-2024-34448 cve@mitre.org |
| n/a--n/a | A SQL injection vulnerability in /model/update_classroom.php in Campcodes Complete Web-Based School Management System 1.0 allows an attacker to execute arbitrary SQL commands via the name parameter. | 2024-05-23 | not yet calculated | CVE-2024-34927 cve@mitre.org |
| n/a--n/a | A SQL injection vulnerability in /model/update_subject_routing.php in Campcodes Complete Web-Based School Management System 1.0 allows an attacker to execute arbitrary SQL commands via the grade parameter. | 2024-05-23 | not yet calculated | CVE-2024-34928 cve@mitre.org |
| n/a--n/a | A SQL injection vulnerability in /view/find_friends.php in Campcodes Complete Web-Based School Management System 1.0 allows an attacker to execute arbitrary SQL commands via the my_index parameter. | 2024-05-23 | not yet calculated | CVE-2024-34929 cve@mitre.org |
| n/a--n/a | A SQL injection vulnerability in /model/all_events1.php in Campcodes Complete Web-Based School Management System 1.0 allows attacker to execute arbitrary SQL commands via the month parameter. | 2024-05-23 | not yet calculated | CVE-2024-34930 cve@mitre.org |
| n/a--n/a | A SQL injection vulnerability in /model/update_subject.php in Campcodes Complete Web-Based School Management System 1.0 allows an attacker to execute arbitrary SQL commands via the name parameter. | 2024-05-23 | not yet calculated | CVE-2024-34931 cve@mitre.org |
| n/a--n/a | A SQL injection vulnerability in /model/update_exam.php in Campcodes Complete Web-Based School Management System 1.0 allows an attacker to execute arbitrary SQL commands via the name parameter. | 2024-05-23 | not yet calculated | CVE-2024-34932 cve@mitre.org |
| n/a--n/a | A SQL injection vulnerability in /model/update_grade.php in Campcodes Complete Web-Based School Management System 1.0 allows an attacker to execute arbitrary SQL commands via the admission_fee parameter. | 2024-05-23 | not yet calculated | CVE-2024-34933 cve@mitre.org |
| n/a--n/a | A SQL injection vulnerability in /view/emarks_range_grade_update_form.php in Campcodes Complete Web-Based School Management System 1.0 allows an attacker to execute arbitrary SQL commands via the conversation_id parameter. | 2024-05-23 | not yet calculated | CVE-2024-34934 cve@mitre.org |
| n/a--n/a | A SQL injection vulnerability in /view/conversation_history_admin.php in Campcodes Complete Web-Based School Management System 1.0 allows an attacker to execute arbitrary SQL commands via the conversation_id parameter. | 2024-05-23 | not yet calculated | CVE-2024-34935 cve@mitre.org |
| n/a--n/a | A SQL injection vulnerability in /view/event1.php in Campcodes Complete Web-Based School Management System 1.0 allows an attacker to execute arbitrary SQL commands via the month parameter. | 2024-05-23 | not yet calculated | CVE-2024-34936 cve@mitre.org |
| n/a--n/a | Quanxun Huiju Network Technology (Beijing) Co.,Ltd IK-Q3000 3.7.10 x64 Build202401261655 was discovered to be vulnerable to an ICMP redirect attack. | 2024-05-20 | not yet calculated | CVE-2024-34947 cve@mitre.org |
| n/a--n/a | An issue in Quanxun Huiju Network Technology(Beijing) Co.,Ltd IK-Q3000 3.7.10 x64 Build202401261655 allows attackers to cause a Denial of Service (DoS) when attempting to make TCP connections. | 2024-05-20 | not yet calculated | CVE-2024-34948 cve@mitre.org |
| n/a--n/a | SQL injection vulnerability in Likeshop before 2.5.7 allows attackers to run abitrary SQL commands via the function OrderLogic::getOrderList function, exploited at the /admin/order/lists.html endpoint. | 2024-05-20 | not yet calculated | CVE-2024-34949 cve@mitre.org |
| n/a--n/a | taurusxin ncmdump v1.3.2 was discovered to contain a segmentation violation via the NeteaseCrypt::FixMetadata() function at /src/ncmcrypt.cpp. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted .ncm file. | 2024-05-20 | not yet calculated | CVE-2024-34952 cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue in taurusxin ncmdump v1.3.2 allows attackers to cause a Denial of Service (DoS) via memory exhaustion by supplying a crafted .ncm file | 2024-05-20 | not yet calculated | CVE-2024-34953 cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | svnWebUI v1.8.3 was discovered to contain an arbitrary file deletion vulnerability via the dirTemps parameter under com.cym.controller.UserController#importOver. This vulnerability allows attackers to delete arbitrary files via a crafted POST request. | 2024-05-24 | not yet calculated | CVE-2024-34995 cve@mitre.org |
| n/a--n/a | NASA AIT-Core v2.5.2 was discovered to contain multiple SQL injection vulnerabilities via the query_packets and insert functions. | 2024-05-21 | not yet calculated | CVE-2024-35056 cve@mitre.org |
| n/a--n/a | An issue in NASA AIT-Core v2.5.2 allows attackers to execute arbitrary code via a crafted packet. | 2024-05-21 | not yet calculated | CVE-2024-35057 cve@mitre.org |
| n/a--n/a | An issue in the API wait function of NASA AIT-Core v2.5.2 allows attackers to execute arbitrary code via supplying a crafted string. | 2024-05-21 | not yet calculated | CVE-2024-35058 cve@mitre.org |
| n/a--n/a | An issue in the Pickle Python library of NASA AIT-Core v2.5.2 allows attackers to execute arbitrary commands. | 2024-05-21 | not yet calculated | CVE-2024-35059 cve@mitre.org |
| n/a--n/a | An issue in the YAML Python library of NASA AIT-Core v2.5.2 allows attackers to execute arbitrary commands via supplying a crafted YAML file. | 2024-05-21 | not yet calculated | CVE-2024-35060 cve@mitre.org |
| n/a--n/a | NASA AIT-Core v2.5.2 was discovered to use unencrypted channels to exchange data over the network, allowing attackers to execute a man-in-the-middle attack. When chained with CVE-2024-35059, the CVE in subject leads to an unauthenticated, fully remote code execution. | 2024-05-21 | not yet calculated | CVE-2024-35061 cve@mitre.org |
| n/a--n/a | An arbitrary file upload vulnerability in the uploadAudio method of inxedu v2024.4 allows attackers to execute arbitrary code via uploading a crafted .jsp file. | 2024-05-23 | not yet calculated | CVE-2024-35079 cve@mitre.org cve@mitre.org |
| n/a--n/a | An arbitrary file upload vulnerability in the gok4 method of inxedu v2024.4 allows attackers to execute arbitrary code via uploading a crafted .jsp file. | 2024-05-23 | not yet calculated | CVE-2024-35080 cve@mitre.org cve@mitre.org |
| n/a--n/a | LuckyFrameWeb v3.5.2 was discovered to contain an arbitrary file deletion vulnerability via the fileName parameter in the fileDownload method. | 2024-05-23 | not yet calculated | CVE-2024-35081 cve@mitre.org cve@mitre.org |
| n/a--n/a | J2EEFAST v2.7.0 was discovered to contain a SQL injection vulnerability via the findPage function in SysOperLogMapper.xml. | 2024-05-23 | not yet calculated | CVE-2024-35082 cve@mitre.org cve@mitre.org |
| n/a--n/a | J2EEFAST v2.7.0 was discovered to contain a SQL injection vulnerability via the findPage function in SysLoginInfoMapper.xml. | 2024-05-23 | not yet calculated | CVE-2024-35083 cve@mitre.org cve@mitre.org |
| n/a--n/a | J2EEFAST v2.7.0 was discovered to contain a SQL injection vulnerability via the findPage function in SysMsgPushMapper.xml. | 2024-05-23 | not yet calculated | CVE-2024-35084 cve@mitre.org cve@mitre.org |
| n/a--n/a | J2EEFAST v2.7.0 was discovered to contain a SQL injection vulnerability via the findPage function in ProcessDefinitionMapper.xml. | 2024-05-23 | not yet calculated | CVE-2024-35085 cve@mitre.org cve@mitre.org |
| n/a--n/a | J2EEFAST v2.7.0 was discovered to contain a SQL injection vulnerability via the findPage function in BpmTaskFromMapper.xml . | 2024-05-23 | not yet calculated | CVE-2024-35086 cve@mitre.org cve@mitre.org |
| n/a--n/a | J2EEFAST v2.7.0 was discovered to contain a SQL injection vulnerability via the findPage function in SysUreportFileMapper.xml. | 2024-05-23 | not yet calculated | CVE-2024-35090 cve@mitre.org cve@mitre.org |
| n/a--n/a | J2EEFAST v2.7.0 was discovered to contain a SQL injection vulnerability via the findPage function in SysTenantMapper.xml. | 2024-05-23 | not yet calculated | CVE-2024-35091 cve@mitre.org cve@mitre.org |
| n/a--n/a | Tenda FH1206 V1.2.0.8(8155) was discovered to contain a command injection vulnerability via the mac parameter at ip/goform/WriteFacMac. | 2024-05-24 | not yet calculated | CVE-2024-35339 cve@mitre.org |
| n/a--n/a | Tenda FH1206 V1.2.0.8(8155) was discovered to contain a command injection vulnerability via the cmdinput parameter at ip/goform/formexeCommand. | 2024-05-24 | not yet calculated | CVE-2024-35340 cve@mitre.org |
| n/a--n/a | MTab Bookmark v1.9.5 has an SQL injection vulnerability in /LinkStore/getIcon. An attacker can execute arbitrary SQL statements through this vulnerability without requiring any user rights. | 2024-05-21 | not yet calculated | CVE-2024-35361 cve@mitre.org |
| n/a--n/a | Ecshop 3.6 is vulnerable to Cross Site Scripting (XSS) via ecshop/article_cat.php. | 2024-05-22 | not yet calculated | CVE-2024-35362 cve@mitre.org |
| n/a--n/a | Mocodo Mocodo Online 4.2.6 and below is vulnerable to Remote Code Execution via /web/rewrite.php. | 2024-05-24 | not yet calculated | CVE-2024-35373 cve@mitre.org cve@mitre.org |
| n/a--n/a | Mocodo Mocodo Online 4.2.6 and below does not properly sanitize the sql_case input field in /web/generate.php, allowing remote attackers to execute arbitrary SQL commands and potentially command injection, leading to remote code execution (RCE) under certain conditions. | 2024-05-24 | not yet calculated | CVE-2024-35374 cve@mitre.org cve@mitre.org |
| n/a--n/a | There is an arbitrary file upload vulnerability on the media add .php page in the backend of the website in version 5.7.114 of DedeCMS | 2024-05-23 | not yet calculated | CVE-2024-35375 cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue in Cesanta mjs 2.20.0 allows a remote attacker to cause a denial of service via the mjs_array_length function in the mjs.c file. | 2024-05-21 | not yet calculated | CVE-2024-35384 cve@mitre.org |
| n/a--n/a | An issue in Cesanta mjs 2.20.0 allows a remote attacker to cause a denial of service via the mjs_mk_ffi_sig function in the mjs.c file. | 2024-05-21 | not yet calculated | CVE-2024-35385 cve@mitre.org |
| n/a--n/a | An issue in Cesanta mjs 2.20.0 allows a remote attacker to cause a denial of service via the mjs_do_gc function in the mjs.c file. | 2024-05-21 | not yet calculated | CVE-2024-35386 cve@mitre.org |
| n/a--n/a | TOTOLINK LR350 V9.3.5u.6369_B20220309 was discovered to contain a stack overflow via the http_host parameter in the function loginAuth. | 2024-05-24 | not yet calculated | CVE-2024-35387 cve@mitre.org |
| n/a--n/a | TOTOLINK NR1800X v9.1.0u.6681_B20230703 was discovered to contain a stack overflow via the password parameter in the function urldecode | 2024-05-24 | not yet calculated | CVE-2024-35388 cve@mitre.org |
| n/a--n/a | TOTOLINK CP900L v4.1.5cu.798_B20221228 was discovered to contain a hardcoded password vulnerability in /etc/shadow.sample, which allows attackers to log in as root. | 2024-05-24 | not yet calculated | CVE-2024-35395 cve@mitre.org cve@mitre.org |
| n/a--n/a | TOTOLINK CP900L v4.1.5cu.798_B20221228 was discovered to contain a hardcoded password for telnet in /web_cste/cgi-bin/product.ini, which allows attackers to log in as root. | 2024-05-24 | not yet calculated | CVE-2024-35396 cve@mitre.org cve@mitre.org |
| n/a--n/a | WeBid 1.1.2 is vulnerable to SQL Injection via admin/tax.php. | 2024-05-22 | not yet calculated | CVE-2024-35409 cve@mitre.org |
| n/a--n/a | A Cross-Site Request Forgery (CSRF) vulnerability was discovered in OpenKM Community Edition on or before version 6.3.12. The vulnerability exists in /admin/DatabaseQuery, which allows an attacker to manipulate a victim with administrative privileges to execute arbitrary SQL commands. | 2024-05-22 | not yet calculated | CVE-2024-35475 cve@mitre.org cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/infoWeb_deal.php?mudi=rev. | 2024-05-22 | not yet calculated | CVE-2024-35550 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/infoWeb_deal.php?mudi=add. | 2024-05-22 | not yet calculated | CVE-2024-35551 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/infoMove_deal.php?mudi=del&dataType=logo&dataTypeCN. | 2024-05-22 | not yet calculated | CVE-2024-35552 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/infoMove_deal.php?mudi=add&nohrefStr=close. | 2024-05-22 | not yet calculated | CVE-2024-35553 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/infoWeb_deal.php?mudi=del&dataType=newsWeb&dataTypeCN. | 2024-05-22 | not yet calculated | CVE-2024-35554 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/share_switch.php?mudi=switch&dataType=newsWeb&fieldName=state&fieldName2=state&tabName=infoWeb&dataID=40. | 2024-05-22 | not yet calculated | CVE-2024-35555 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/vpsSys_deal.php?mudi=infoSet. | 2024-05-22 | not yet calculated | CVE-2024-35556 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/vpsApi_deal.php?mudi=rev&nohrefStr=close. | 2024-05-22 | not yet calculated | CVE-2024-35557 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/ca_deal.php?mudi=rev&nohrefStr=close. | 2024-05-22 | not yet calculated | CVE-2024-35558 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/infoMove_deal.php?mudi=rev&nohrefStr=close. | 2024-05-22 | not yet calculated | CVE-2024-35559 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/ca_deal.php?mudi=del&dataType=&dataTypeCN. | 2024-05-22 | not yet calculated | CVE-2024-35560 cve@mitre.org |
| n/a--n/a | idccms v1.35 was discovered to contain a Cross-Site Request Forgery (CSRF) via the component /admin/ca_deal.php?mudi=add&nohrefStr=close. | 2024-05-22 | not yet calculated | CVE-2024-35561 cve@mitre.org |
| n/a--n/a | An arbitrary file upload vulnerability in the component \controller\ImageUploadController.class of inxedu v2.0.6 allows attackers to execute arbitrary code via uploading a crafted jsp file. | 2024-05-23 | not yet calculated | CVE-2024-35570 cve@mitre.org |
| n/a--n/a | Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.stb.mode parameter in the function formSetIptv. | 2024-05-20 | not yet calculated | CVE-2024-35571 cve@mitre.org |
| n/a--n/a | Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.stb.port parameter in the function formSetIptv. | 2024-05-20 | not yet calculated | CVE-2024-35576 cve@mitre.org |
| n/a--n/a | Tenda AX1806 v1.0.0.1 contains a stack overflow via the adv.iptv.stballvlans parameter in the function formSetIptv. | 2024-05-20 | not yet calculated | CVE-2024-35578 cve@mitre.org |
| n/a--n/a | Tenda AX1806 v1.0.0.1 contains a stack overflow via the iptv.city.vlan parameter in the function formSetIptv. | 2024-05-20 | not yet calculated | CVE-2024-35579 cve@mitre.org |
| n/a--n/a | Tenda AX1806 v1.0.0.1 contains a stack overflow via the adv.iptv.stbpvid parameter in the function formSetIptv. | 2024-05-20 | not yet calculated | CVE-2024-35580 cve@mitre.org |
| n/a--n/a | An arbitrary file upload vulnerability in O2OA v8.3.8 allows attackers to execute arbitrary code via uploading a crafted PDF file. | 2024-05-24 | not yet calculated | CVE-2024-35591 cve@mitre.org |
| n/a--n/a | An arbitrary file upload vulnerability in the Upload function of Box-IM v2.0 allows attackers to execute arbitrary code via uploading a crafted PDF file. | 2024-05-24 | not yet calculated | CVE-2024-35592 cve@mitre.org |
| n/a--n/a | An arbitrary file upload vulnerability in the File preview function of Raingad IM v4.1.4 allows attackers to execute arbitrary code via uploading a crafted PDF file. | 2024-05-24 | not yet calculated | CVE-2024-35593 cve@mitre.org |
| n/a--n/a | An arbitrary file upload vulnerability in the File Preview function of Xintongda OA v2023.12.30.1 allows attackers to execute arbitrary code via uploading a crafted PDF file. | 2024-05-24 | not yet calculated | CVE-2024-35595 cve@mitre.org cve@mitre.org |
| n/a--n/a | PingCAP TiDB v7.5.1 was discovered to contain a NULL pointer dereference via the component SortedRowContainer. | 2024-05-24 | not yet calculated | CVE-2024-35618 cve@mitre.org cve@mitre.org |
| n/a--n/a | tileserver-gl up to v4.4.10 was discovered to contain a cross-site scripting (XSS) vulnerability via the component /data/v3/?key. | 2024-05-22 | not yet calculated | CVE-2024-35627 cve@mitre.org |
| n/a--n/a | PyMySQL through 1.1.0 allows SQL injection if used with untrusted JSON input because keys are not escaped by escape_dict. | 2024-05-21 | not yet calculated | CVE-2024-36039 cve@mitre.org |
| n/a--n/a | Aptos Wisal payroll accounting before 7.1.6 uses hardcoded credentials in the Windows client to fetch the complete list of usernames and passwords from the database server, using an unencrypted connection. This allows attackers in a machine-in-the-middle position read and write access to personally identifiable information (PII) and especially payroll data and the ability to impersonate legitimate users with respect to the audit log. | 2024-05-24 | not yet calculated | CVE-2024-36049 cve@mitre.org |
| n/a--n/a | RARLAB WinRAR before 7.00, on Windows, allows attackers to spoof the screen output via ANSI escape sequences, a different issue than CVE-2024-33899. | 2024-05-21 | not yet calculated | CVE-2024-36052 cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue was discovered in Vaultize 21.07.27. When uploading files, there is no check that the filename parameter is correct. As a result, a temporary file will be created outside the specified directory when the file is downloaded. To exploit this, an authenticated user would upload a file with an incorrect file name, and then download it. | 2024-05-24 | not yet calculated | CVE-2024-36079 cve@mitre.org |
| n/a--n/a | Pug through 3.0.2 allows JavaScript code execution if an application accepts untrusted input for the name option of the compileClient, compileFileClient, or compileClientWithDependenciesTracked function. NOTE: these functions are for compiling Pug templates into JavaScript, and there would typically be no reason to allow untrusted callers. | 2024-05-24 | not yet calculated | CVE-2024-36361 cve@mitre.org cve@mitre.org |
| parisneo--parisneo/lollms-webui | A remote code execution (RCE) vulnerability exists in the parisneo/lollms-webui, specifically within the 'open_file' module, version 9.5. The vulnerability arises due to improper neutralization of special elements used in a command within the 'open_file' function. An attacker can exploit this vulnerability by crafting a malicious file path that, when processed by the 'open_file' function, executes arbitrary system commands or reads sensitive file content. This issue is present in the code where subprocess.Popen is used unsafely to open files based on user-supplied paths without adequate validation, leading to potential command injection. | 2024-05-22 | not yet calculated | CVE-2024-4267 security@huntr.dev |
| scrapy--scrapy/scrapy | In scrapy/scrapy, an issue was identified where the Authorization header is not removed during redirects that only change the scheme (e.g., HTTPS to HTTP) but remain within the same domain. This behavior contravenes the Fetch standard, which mandates the removal of Authorization headers in cross-origin requests when the scheme, host, or port changes. Consequently, when a redirect downgrades from HTTPS to HTTP, the Authorization header may be inadvertently exposed in plaintext, leading to potential sensitive information disclosure to unauthorized actors. The flaw is located in the _build_redirect_request function of the redirect middleware. | 2024-05-20 | not yet calculated | CVE-2024-1968 security@huntr.dev security@huntr.dev |
Please share your thoughts
We recently updated our anonymous product survey; we’d welcome your feedback.