Vulnerability Summary for the Week of September 2, 2024
Released
Sep 09, 2024
Document ID
SB24-253
The CISA Vulnerability Bulletin provides a summary of new vulnerabilities that have been recorded by the National Institute of Standards and Technology (NIST) National Vulnerability Database (NVD) in the past week. In some cases, the vulnerabilities in the bulletin may not yet have assigned CVSS scores. Please visit NVD for updated vulnerability entries, which include CVSS scores once they are available.
Vulnerabilities are based on the Common Vulnerabilities and Exposures (CVE) vulnerability naming standard and are organized according to severity, determined by the Common Vulnerability Scoring System (CVSS) standard. The division of high, medium, and low severities correspond to the following scores:
- High: vulnerabilities with a CVSS base score of 7.0–10.0
- Medium: vulnerabilities with a CVSS base score of 4.0–6.9
- Low: vulnerabilities with a CVSS base score of 0.0–3.9
Entries may include additional information provided by organizations and efforts sponsored by CISA. This information may include identifying information, values, definitions, and related links. Patch information is provided when available. Please note that some of the information in the bulletin is compiled from external, open-source reports and is not a direct result of CISA analysis.
Vulnerability Severity:
High Vulnerabilities
| Primary Vendor -- Product | Description | Published | CVSS Score | Source Info | Patch Info |
|---|---|---|---|---|---|
| abcd-community -- abcd | A vulnerability classified as problematic has been found in ABCD ABCD2 up to 2.2.0-beta-1. This affects an unknown part of the file /common/show_image.php. The manipulation of the argument image leads to path traversal: '../filedir'. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-04 | 7.5 | CVE-2024-8409 | cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| abcd-community -- abcd | A vulnerability classified as problematic was found in ABCD ABCD2 up to 2.2.0-beta-1. This vulnerability affects unknown code of the file /abcd/opac/php/otros_sitios.php. The manipulation of the argument sitio leads to path traversal. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-04 | 7.5 | CVE-2024-8410 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| actions--toolkit | actions/artifact is the GitHub ToolKit for developing GitHub Actions. Versions of `actions/artifact` before 2.1.7 are vulnerable to arbitrary file write when using `downloadArtifactInternal`, `downloadArtifactPublic`, or `streamExtractExternal` for extracting a specifically crafted artifact that contains path traversal filenames. Users are advised to upgrade to version 2.1.7 or higher. There are no known workarounds for this issue. | 2024-09-02 | 7.3 | CVE-2024-42471 | security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| alfio-event--alf.io | alf.io is an open source ticket reservation system for conferences, trade shows, workshops, and meetups. Prior to version 2.0-M5, a race condition allows the user to bypass the limit on the number of promo codes and use the discount coupon multiple times. In "alf.io", an event organizer can apply price discounts by using promo codes to your events. The organizer can limit the number of promo codes that will be used for this, but the time-gap between checking the number of codes and restricting the use of the codes allows a threat actor to bypass the promo code limit. Version 2.0-M5 fixes this issue. | 2024-09-06 | 7.5 | CVE-2024-45300 | security-advisories@github.com security-advisories@github.com |
| angeljudesuarez -- event_management_system | Sourcecodehero Event Management System1.0 is vulnerable to SQL Injection via the parameter 'username' in /event/admin/login.php. | 2024-09-05 | 9.8 | CVE-2024-44727 | cve@mitre.org |
| apache -- ofbiz | Server-Side Request Forgery (SSRF), Improper Control of Generation of Code ('Code Injection') vulnerability in Apache OFBiz. This issue affects Apache OFBiz: before 18.12.16. Users are recommended to upgrade to version 18.12.16, which fixes the issue. | 2024-09-04 | 9.8 | CVE-2024-45507 | security@apache.org security@apache.org security@apache.org security@apache.org |
| apache -- ofbiz | Direct Request ('Forced Browsing') vulnerability in Apache OFBiz. This issue affects Apache OFBiz: before 18.12.16. Users are recommended to upgrade to version 18.12.16, which fixes the issue. | 2024-09-04 | 7.5 | CVE-2024-45195 | security@apache.org security@apache.org security@apache.org security@apache.org |
| Arm Ltd--Bifrost GPU Kernel Driver | Use After Free vulnerability in Arm Ltd Bifrost GPU Kernel Driver, Arm Ltd Valhall GPU Kernel Driver, Arm Ltd Arm 5th Gen GPU Architecture Kernel Driver allows a local non-privileged user to make improper GPU memory processing operations to gain access to already freed memory.This issue affects Bifrost GPU Kernel Driver: from r43p0 through r49p0; Valhall GPU Kernel Driver: from r43p0 through r49p0; Arm 5th Gen GPU Architecture Kernel Driver: from r43p0 through r49p0. | 2024-09-03 | 7.8 | CVE-2024-3655 | arm-security@arm.com |
| Authenticator-Extension--Authenticator | Authenticator is a browser extensions that generates two-step verification codes. In versions 7.0.0 and below, encryption keys for user data were stored encrypted at-rest using only AES-256 and the EVP_BytesToKey KDF. Therefore, attackers with a copy of a user's data are able to brute-force the user's encryption key. Users on version 8.0.0 and above are automatically migrated away from the weak encoding on first login. Users should destroy encrypted backups made with versions prior to 8.0.0. | 2024-09-03 | 8.8 | CVE-2024-45394 | security-advisories@github.com security-advisories@github.com |
| bitpressadmin--Bit File Manager 100% Free & Open Source File Manager and Code Editor for WordPress | The Bit File Manager plugin for WordPress is vulnerable to Remote Code Execution in versions 6.0 to 6.5.5 via the 'checkSyntax' function. This is due to writing a temporary file to a publicly accessible directory before performing file validation. This makes it possible for unauthenticated attackers to execute code on the server if an administrator has allowed Guest User read permissions. | 2024-09-05 | 8.1 | CVE-2024-7627 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| blakeembrey--js-template | @blakeembrey/template is a string template library. Prior to version 1.2.0, it is possible to inject and run code within the template if the attacker has access to write the template name. Version 1.2.0 contains a patch. As a workaround, don't pass untrusted input as the template display name, or don't use the display name feature. | 2024-09-03 | 7.3 | CVE-2024-45390 | security-advisories@github.com security-advisories@github.com |
| chrisbadgett--LifterLMS WP LMS for eLearning, Online Courses, & Quizzes | The LifterLMS - WP LMS for eLearning, Online Courses, & Quizzes plugin for WordPress is vulnerable to blind SQL Injection via the 'order' parameter in all versions up to, and including, 7.7.5 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with administrator-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | 2024-09-06 | 7.2 | CVE-2024-7349 | security@wordfence.com security@wordfence.com |
| Cisco--Cisco Smart License Utility | A vulnerability in Cisco Smart Licensing Utility could allow an unauthenticated, remote attacker to log in to an affected system by using a static administrative credential. This vulnerability is due to an undocumented static user credential for an administrative account. An attacker could exploit this vulnerability by using the static credentials to log in to the affected system. A successful exploit could allow the attacker to log in to the affected system with administrative privileges over the API of the Cisco Smart Licensing Utility application. | 2024-09-04 | 9.8 | CVE-2024-20439 | ykramarz@cisco.com |
| Cisco--Cisco Smart License Utility | A vulnerability in Cisco Smart Licensing Utility could allow an unauthenticated, remote attacker to access sensitive information. This vulnerability is due to excessive verbosity in a debug log file. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain log files that contain sensitive data, including credentials that can be used to access the API. | 2024-09-04 | 7.5 | CVE-2024-20440 | ykramarz@cisco.com |
| code-projects--Hospital Management System | A vulnerability has been found in code-projects Hospital Management System 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file user-login.php. The manipulation of the argument username leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | 2024-09-08 | 7.3 | CVE-2024-8569 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| containers -- aardvark-dns | A flaw was found in Aardvark-dns versions 1.12.0 and 1.12.1. They contain a denial of service vulnerability due to serial processing of TCP DNS queries. This flaw allows a malicious client to keep a TCP connection open indefinitely, causing other DNS queries to time out and resulting in a denial of service for all other containers using aardvark-dns. | 2024-09-04 | 7.5 | CVE-2024-8418 | secalert@redhat.com secalert@redhat.com secalert@redhat.com secalert@redhat.com |
| contrid--Newsletters | The Newsletters plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 4.9.9.2. This is due to the plugin not restricting what user meta can be updated as screen options. This makes it possible for authenticated attackers, with subscriber-level access and above, to escalate their privileges to that of an administrator. Please note that this only affects users with access to edit/update screen options, which means an administrator would need to grant lower privilege users with access to the Sent & Draft Emails page of the plugin in order for this to be exploited. | 2024-09-06 | 8.8 | CVE-2024-8247 | security@wordfence.com security@wordfence.com security@wordfence.com |
| Dell--SmartFabric OS10 Software | Dell SmartFabric OS10 Software, version(s) 10.5.5.4 through 10.5.5.10 and 10.5.6.x , contain(s) an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. | 2024-09-06 | 7.5 | CVE-2024-38486 | security_alert@emc.com |
| Dell--SmartFabric OS10 Software | Dell SmartFabric OS10 Software, version(s) 10.5.5.4 through 10.5.5.10 and 10.5.6.x, contain(s) an Use of Hard-coded Password vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Client-side request forgery and Information disclosure. | 2024-09-06 | 7.9 | CVE-2024-39585 | security_alert@emc.com |
| dlink -- di-8400_firmware | D-Link DI-8400 16.07.26A1 is vulnerable to Command Injection via upgrade_filter_asp. | 2024-09-04 | 9.8 | CVE-2024-44400 | cve@mitre.org cve@mitre.org |
| dotonpaper--Pinpoint Booking System #1 WordPress Booking Plugin | The Pinpoint Booking System - #1 WordPress Booking Plugin plugin for WordPress is vulnerable to SQL Injection via the 'schedule' parameter in all versions up to, and including, 2.9.9.5.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | 2024-09-07 | 8.8 | CVE-2024-7112 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| easytest -- easytest_online_test_platform | SQL Injection in download student learning course function of Easytest Online Test Platform ver.24E01 and earlier allow remote attackers to execute arbitrary SQL commands via the uid parameter. | 2024-09-02 | 9.8 | CVE-2024-43772 | ART@zuso.ai |
| easytest -- easytest_online_test_platform | SQL Injection in download class learning course function of Easytest Online Test Platform ver.24E01 and earlier allow remote attackers to execute arbitrary SQL commands via the cstr parameter. | 2024-09-02 | 9.8 | CVE-2024-43773 | ART@zuso.ai |
| easytest -- easytest_online_test_platform | SQL Injection in download personal learning course function of Easytest Online Test Platform ver.24E01 and earlier allow remote authenticated users to execute arbitrary SQL commands via the uid parameter. | 2024-09-02 | 8.8 | CVE-2024-43774 | ART@zuso.ai |
| easytest -- easytest_online_test_platform | SQL Injection in search course titles function of Easytest Online Test Platform ver.24E01 and earlier allow remote authenticated users to execute arbitrary SQL commands via the search parameter. | 2024-09-02 | 8.8 | CVE-2024-43775 | ART@zuso.ai |
| easytest -- easytest_online_test_platform | SQL Injection in mock exam function of Easytest Online Test Platform ver.24E01 and earlier allow remote authenticated users to execute arbitrary SQL commands via the qlevel parameter. | 2024-09-02 | 8.8 | CVE-2024-43776 | ART@zuso.ai |
| easytest_online_test_platform_project -- easytest_online_test_platform | SQL Injection in online dictionary function of Easytest Online Test Platform ver.24E01 and earlier allow remote authenticated users to execute arbitrary SQL commands via the word parameter. | 2024-09-02 | 8.8 | CVE-2024-7871 | ART@zuso.ai |
| elabftw--elabftw | eLabFTW is an open source electronic lab notebook for research labs. By uploading specially crafted files, a regular user can create a circumstance where a visitor's browser runs arbitrary JavaScript code in the context of the eLabFTW application. This can be triggered by the visitor viewing a list of experiments. Viewing this allows the malicious script to act on behalf of the visitor in any way, including the creation of API keys for persistence, or other options normally available to the user. If the user viewing the page has the sysadmin role in eLabFTW, the script can act as a sysadmin (including system configuration and extensive user management roles). Users are advised to upgrade to at least version 5.0.0. There are no known workarounds for this vulnerability. | 2024-09-02 | 8.9 | CVE-2024-28100 | security-advisories@github.com |
| ethyca -- fides | Fides is an open-source privacy engineering platform. Starting in version 2.19.0 and prior to version 2.44.0, the Email Templating feature uses Jinja2 without proper input sanitization or rendering environment restrictions, allowing for Server-Side Template Injection that grants Remote Code Execution to privileged users. A privileged user refers to an Admin UI user with the default `Owner` or `Contributor` role, who can escalate their access and execute code on the underlying Fides Webserver container where the Jinja template rendering function is executed. The vulnerability has been patched in Fides version `2.44.0`. Users are advised to upgrade to this version or later to secure their systems against this threat. There are no workarounds. | 2024-09-04 | 7.2 | CVE-2024-45053 | security-advisories@github.com security-advisories@github.com |
| FlyCASS--Cockpit Access Security System (CASS) | FlyCASS CASS and KCM systems did not correctly filter SQL queries, which made them vulnerable to attack by outside attackers with no authentication. | 2024-09-05 | 9.8 | CVE-2024-8395 | ics-cert@hq.dhs.gov |
| Forcepoint--Email Security | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Forcepoint Email Security (Real Time Monitor modules) allows Reflected XSS.This issue affects Email Security: before 8.5.5 HF003. | 2024-09-04 | 8.8 | CVE-2024-2166 | psirt@forcepoint.com |
| freebsd -- freebsd | Concurrent removals of certain anonymous shared memory mappings by using the UMTX_SHM_DESTROY sub-request of UMTX_OP_SHM can lead to decreasing the reference count of the object representing the mapping too many times, causing it to be freed too early. A malicious code exercizing the UMTX_SHM_DESTROY sub-request in parallel can panic the kernel or enable further Use-After-Free attacks, potentially including code execution or Capsicum sandbox escape. | 2024-09-05 | 10 | CVE-2024-43102 | secteam@freebsd.org |
| freebsd -- freebsd | An insufficient boundary validation in the USB code could lead to an out-of-bounds write on the heap, with data controlled by the caller. A malicious, privileged software running in a guest VM can exploit the vulnerability to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. | 2024-09-05 | 8.2 | CVE-2024-32668 | secteam@freebsd.org |
| freebsd -- freebsd | The ctl_report_supported_opcodes function did not sufficiently validate a field provided by userspace, allowing an arbitrary write to a limited amount of kernel help memory. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host. | 2024-09-05 | 8.8 | CVE-2024-42416 | secteam@freebsd.org |
| freebsd -- freebsd | The ctl_request_sense function could expose up to three bytes of the kernel heap to userspace. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host. | 2024-09-05 | 8.8 | CVE-2024-43110 | secteam@freebsd.org |
| freebsd -- freebsd | The function ctl_write_buffer incorrectly set a flag which resulted in a kernel Use-After-Free when a command finished processing. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host. | 2024-09-05 | 8.8 | CVE-2024-45063 | secteam@freebsd.org |
| freebsd -- freebsd | The ctl_write_buffer and ctl_read_buffer functions allocated memory to be returned to userspace, without initializing it. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host. | 2024-09-05 | 8.8 | CVE-2024-8178 | secteam@freebsd.org |
| freebsd -- freebsd | A malicious value of size in a structure of packed libnv can cause an integer overflow, leading to the allocation of a smaller buffer than required for the parsed data. | 2024-09-05 | 7.5 | CVE-2024-45287 | secteam@freebsd.org |
| FreeBSD--FreeBSD | Malicious software running in a guest VM can exploit the buffer overflow to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. | 2024-09-05 | 8.4 | CVE-2024-41928 | secteam@freebsd.org |
| FreeBSD--FreeBSD | A missing null-termination character in the last element of an nvlist array string can lead to writing outside the allocated buffer. | 2024-09-05 | 8.4 | CVE-2024-45288 | secteam@freebsd.org |
| Google--Chrome | Out of bounds write in V8 in Google Chrome prior to 128.0.6613.119 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | 2024-09-03 | 8.8 | CVE-2024-7970 | chrome-cve-admin@google.com chrome-cve-admin@google.com |
| Google--Chrome | Use after free in WebAudio in Google Chrome prior to 128.0.6613.119 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | 2024-09-03 | 8.8 | CVE-2024-8362 | chrome-cve-admin@google.com chrome-cve-admin@google.com |
| hapifhir--org.hl7.fhir.core | The HL7 FHIR Core Artifacts repository provides the java core object handling code, with utilities (including validator), for the Fast Healthcare Interoperability Resources (FHIR) specification. Prior to version 6.3.23, XSLT transforms performed by various components are vulnerable to XML external entity injections. A processed XML file with a malicious DTD tag could produce XML containing data from the host system. This impacts use cases where org.hl7.fhir.core is being used to within a host where external clients can submit XML. This issue has been patched in release 6.3.23. No known workarounds are available. | 2024-09-06 | 8.6 | CVE-2024-45294 | security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| haproxy -- haproxy | HAProxy 2.9.x before 2.9.10, 3.0.x before 3.0.4, and 3.1.x through 3.1-dev6 allows a remote denial of service. | 2024-09-04 | 7.5 | CVE-2024-45506 | cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org |
| huawei -- emui | Directory traversal vulnerability in the cust module Impact: Successful exploitation of this vulnerability will affect availability and confidentiality. | 2024-09-04 | 9.1 | CVE-2024-45443 | psirt@huawei.com |
| ibm -- aspera_faspex | IBM Aspera Faspex 5.0.0 through 5.0.9 could allow a user to bypass intended access restrictions and conduct resource modification. | 2024-09-05 | 8.1 | CVE-2024-45098 | psirt@us.ibm.com |
| ibm -- aspera_faspex | IBM Aspera Faspex 5.0.0 through 5.0.9 could allow a user to bypass intended access restrictions and conduct resource modification. | 2024-09-05 | 7.1 | CVE-2024-45097 | psirt@us.ibm.com |
| ibm -- webmethods_integration | IBM webMethods Integration 10.15 could allow an authenticated user to upload and execute arbitrary files which could be executed on the underlying operating system. | 2024-09-04 | 9.9 | CVE-2024-45076 | psirt@us.ibm.com |
| ibm -- webmethods_integration | IBM webMethods Integration 10.15 could allow an authenticated user to create scheduler tasks that would allow them to escalate their privileges to administrator due to missing authentication. | 2024-09-04 | 8.8 | CVE-2024-45075 | psirt@us.ibm.com |
| IBM--MQ Operator | IBM MQ Operator 2.0.26 and 3.2.4 could allow an authenticated user in a specifically defined role, to bypass security restrictions and execute actions against the queue manager. | 2024-09-07 | 7.5 | CVE-2024-40681 | psirt@us.ibm.com psirt@us.ibm.com |
| Internet Computer--ic-cdk | When a canister method is called via ic_cdk::call* , a new Future CallFuture is created and can be awaited by the caller to get the execution result. Internally, the state of the Future is tracked and stored in a struct called CallFutureState. A bug in the polling implementation of the CallFuture allows multiple references to be held for this internal state and not all references were dropped before the Future is resolved. Since we have unaccounted references held, a copy of the internal state ended up being persisted in the canister's heap and thus causing a memory leak. Impact Canisters built in Rust with ic_cdk and ic_cdk_timers are affected. If these canisters call a canister method, use timers or heartbeat, they will likely leak a small amount of memory on every such operation. In the worst case, this could lead to heap memory exhaustion triggered by an attacker. Motoko based canisters are not affected by the bug. PatchesThe patch has been backported to all minor versions between >= 0.8.0, <= 0.15.0. The patched versions available are 0.8.2, 0.9.3, 0.10.1, 0.11.6, 0.12.2, 0.13.5, 0.14.1, 0.15.1 and their previous versions have been yanked. WorkaroundsThere are no known workarounds at the moment. Developers are recommended to upgrade their canister as soon as possible to the latest available patched version of ic_cdk to avoid running out of Wasm heap memory. Upgrading the canisters (without updating `ic_cdk`) also frees the leaked memory but it's only a temporary solution. | 2024-09-05 | 7.5 | CVE-2024-7884 | 6b35d637-e00f-4228-858c-b20ad6e1d07b 6b35d637-e00f-4228-858c-b20ad6e1d07b 6b35d637-e00f-4228-858c-b20ad6e1d07b |
| itsourcecode--Payroll Management System | A vulnerability, which was classified as critical, has been found in itsourcecode Payroll Management System 1.0. This issue affects some unknown processing of the file /ajax.php?action=delete_deductions. The manipulation of the argument id leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. | 2024-09-08 | 7.3 | CVE-2024-8567 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Lif-Platforms--New-Ringer-Server | Ringer server is the server code for the Ringer messaging app. Prior to version 1.3.1, there is an issue with the messages loading route where Ringer Server does not check to ensure that the user loading the conversation is actually a member of that conversation. This allows any user with a Lif Account to load any conversation between two users without permission. This issue had been patched in version 1.3.1. There is no action required for users. Lif Platforms will update their servers with the patch. | 2024-09-04 | 7.1 | CVE-2024-45050 | security-advisories@github.com security-advisories@github.com |
| linen -- linen | Linen before cd37c3e does not verify that the domain is linen.dev or www.linen.dev when resetting a password. This occurs in create in apps/web/pages/api/forgot-password/index.ts. | 2024-09-02 | 9.8 | CVE-2024-45522 | cve@mitre.org |
| linksys -- wrt54g_firmware | A vulnerability was found in Linksys WRT54G 4.21.5. It has been rated as critical. Affected by this issue is the function validate_services_port of the file /apply.cgi of the component POST Parameter Handler. The manipulation of the argument services_array leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-04 | 9.8 | CVE-2024-8408 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: idpf: fix memory leaks and crashes while performing a soft reset The second tagged commit introduced a UAF, as it removed restoring q_vector->vport pointers after reinitializating the structures. This is due to that all queue allocation functions are performed here with the new temporary vport structure and those functions rewrite the backpointers to the vport. Then, this new struct is freed and the pointers start leading to nowhere. But generally speaking, the current logic is very fragile. It claims to be more reliable when the system is low on memory, but in fact, it consumes two times more memory as at the moment of running this function, there are two vports allocated with their queues and vectors. Moreover, it claims to prevent the driver from running into "bad state", but in fact, any error during the rebuild leaves the old vport in the partially allocated state. Finally, if the interface is down when the function is called, it always allocates a new queue set, but when the user decides to enable the interface later on, vport_open() allocates them once again, IOW there's a clear memory leak here. Just don't allocate a new queue set when performing a reset, that solves crashes and memory leaks. Readd the old queue number and reopen the interface on rollback - that solves limbo states when the device is left disabled and/or without HW queues enabled. | 2024-09-04 | 7.8 | CVE-2024-44964 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: avoid possible UaF when selecting endp select_local_address() and select_signal_address() both select an endpoint entry from the list inside an RCU protected section, but return a reference to it, to be read later on. If the entry is dereferenced after the RCU unlock, reading info could cause a Use-after-Free. A simple solution is to copy the required info while inside the RCU protected section to avoid any risk of UaF later. The address ID might need to be modified later to handle the ID0 case later, so a copy seems OK to deal with. | 2024-09-04 | 7.8 | CVE-2024-44974 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent possible UAF in ip6_xmit() If skb_expand_head() returns NULL, skb has been freed and the associated dst/idev could also have been freed. We must use rcu_read_lock() to prevent a possible UAF. | 2024-09-04 | 7.8 | CVE-2024-44985 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in ip6_finish_output2() If skb_expand_head() returns NULL, skb has been freed and associated dst/idev could also have been freed. We need to hold rcu_read_lock() to make sure the dst and associated idev are alive. | 2024-09-04 | 7.8 | CVE-2024-44986 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: ipv6: prevent UAF in ip6_send_skb() syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 </TASK> Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree. ---truncated--- | 2024-09-04 | 7.8 | CVE-2024-44987 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix out-of-bounds read in `v3d_csd_job_run()` When enabling UBSAN on Raspberry Pi 5, we get the following warning: [ 387.894977] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/v3d/v3d_sched.c:320:3 [ 387.903868] index 7 is out of range for type '__u32 [7]' [ 387.909692] CPU: 0 PID: 1207 Comm: kworker/u16:2 Tainted: G WC 6.10.3-v8-16k-numa #151 [ 387.919166] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) [ 387.925961] Workqueue: v3d_csd drm_sched_run_job_work [gpu_sched] [ 387.932525] Call trace: [ 387.935296] dump_backtrace+0x170/0x1b8 [ 387.939403] show_stack+0x20/0x38 [ 387.942907] dump_stack_lvl+0x90/0xd0 [ 387.946785] dump_stack+0x18/0x28 [ 387.950301] __ubsan_handle_out_of_bounds+0x98/0xd0 [ 387.955383] v3d_csd_job_run+0x3a8/0x438 [v3d] [ 387.960707] drm_sched_run_job_work+0x520/0x6d0 [gpu_sched] [ 387.966862] process_one_work+0x62c/0xb48 [ 387.971296] worker_thread+0x468/0x5b0 [ 387.975317] kthread+0x1c4/0x1e0 [ 387.978818] ret_from_fork+0x10/0x20 [ 387.983014] ---[ end trace ]--- This happens because the UAPI provides only seven configuration registers and we are reading the eighth position of this u32 array. Therefore, fix the out-of-bounds read in `v3d_csd_job_run()` by accessing only seven positions on the '__u32 [7]' array. The eighth register exists indeed on V3D 7.1, but it isn't currently used. That being so, let's guarantee that it remains unused and add a note that it could be set in a future patch. | 2024-09-04 | 7.1 | CVE-2024-44993 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_wed: fix use-after-free panic in mtk_wed_setup_tc_block_cb() When there are multiple ap interfaces on one band and with WED on, turning the interface down will cause a kernel panic on MT798X. Previously, cb_priv was freed in mtk_wed_setup_tc_block() without marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too. Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL in mtk_wed_setup_tc_block_cb(). ---------- Unable to handle kernel paging request at virtual address 0072460bca32b4f5 Call trace: mtk_wed_setup_tc_block_cb+0x4/0x38 0xffffffc0794084bc tcf_block_playback_offloads+0x70/0x1e8 tcf_block_unbind+0x6c/0xc8 ... --------- | 2024-09-04 | 7.8 | CVE-2024-44997 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: atm: idt77252: prevent use after free in dequeue_rx() We can't dereference "skb" after calling vcc->push() because the skb is released. | 2024-09-04 | 7.8 | CVE-2024-44998 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: gtp: pull network headers in gtp_dev_xmit() syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1] We must make sure the IPv4 or Ipv6 header is pulled in skb->head before accessing fields in them. Use pskb_inet_may_pull() to fix this issue. [1] BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline] BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 ipv6_pdp_find drivers/net/gtp.c:220 [inline] gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 __netdev_start_xmit include/linux/netdevice.h:4913 [inline] netdev_start_xmit include/linux/netdevice.h:4922 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423 dev_queue_xmit include/linux/netdevice.h:3105 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3145 [inline] packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3994 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815 packet_alloc_skb net/packet/af_packet.c:2994 [inline] packet_snd net/packet/af_packet.c:3088 [inline] packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3e913 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 | 2024-09-04 | 7.1 | CVE-2024-44999 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linuxfoundation -- yocto | In wlan, there is a possible denial of service due to incorrect error handling. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08861558; Issue ID: MSV-1526. | 2024-09-02 | 7.5 | CVE-2024-20089 | security@mediatek.com |
| mindsdb -- mindsdb | MindsDB is a platform for building artificial intelligence from enterprise data. Prior to version 23.12.4.2, a threat actor can bypass the server-side request forgery protection on the whole website with DNS Rebinding. The vulnerability can also lead to denial of service. Version 23.12.4.2 contains a patch. | 2024-09-05 | 9.1 | CVE-2024-24759 | security-advisories@github.com security-advisories@github.com |
| mozilla -- firefox | A potentially exploitable type confusion could be triggered when looking up a property name on an object being used as the `with` environment. This vulnerability affects Firefox < 130, Firefox ESR < 128.2, Firefox ESR < 115.15, Thunderbird < 128.2, and Thunderbird < 115.15. | 2024-09-03 | 9.8 | CVE-2024-8381 | security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org |
| mozilla -- firefox | The JavaScript garbage collector could mis-color cross-compartment objects if OOM conditions were detected at the right point between two passes. This could have led to memory corruption. This vulnerability affects Firefox < 130, Firefox ESR < 128.2, Firefox ESR < 115.15, Thunderbird < 128.2, and Thunderbird < 115.15. | 2024-09-03 | 9.8 | CVE-2024-8384 | security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org |
| mozilla -- firefox | A difference in the handling of StructFields and ArrayTypes in WASM could be used to trigger an exploitable type confusion vulnerability. This vulnerability affects Firefox < 130, Firefox ESR < 128.2, and Thunderbird < 128.2. | 2024-09-03 | 9.8 | CVE-2024-8385 | security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org |
| mozilla -- firefox | Memory safety bugs present in Firefox 129, Firefox ESR 128.1, and Thunderbird 128.1. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 130, Firefox ESR < 128.2, and Thunderbird < 128.2. | 2024-09-03 | 9.8 | CVE-2024-8387 | security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org |
| mozilla -- firefox | Memory safety bugs present in Firefox 129. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 130. | 2024-09-03 | 9.8 | CVE-2024-8389 | security@mozilla.org security@mozilla.org |
| mozilla -- firefox | Internal browser event interfaces were exposed to web content when privileged EventHandler listener callbacks ran for those events. Web content that tried to use those interfaces would not be able to use them with elevated privileges, but their presence would indicate certain browser features had been used, such as when a user opened the Dev Tools console. This vulnerability affects Firefox < 130, Firefox ESR < 128.2, Firefox ESR < 115.15, Thunderbird < 128.2, and Thunderbird < 115.15. | 2024-09-03 | 8.8 | CVE-2024-8382 | security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org |
| mozilla -- firefox | Firefox normally asks for confirmation before asking the operating system to find an application to handle a scheme that the browser does not support. It did not ask before doing so for the Usenet-related schemes news: and snews:. Since most operating systems don't have a trusted newsreader installed by default, an unscrupulous program that the user downloaded could register itself as a handler. The website that served the application download could then launch that application at will. This vulnerability affects Firefox < 130, Firefox ESR < 128.2, and Firefox ESR < 115.15. | 2024-09-03 | 7.5 | CVE-2024-8383 | security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org |
| Mozilla--Firefox | An error in the ECMA-262 specification relating to Async Generators could have resulted in a type confusion, potentially leading to memory corruption and an exploitable crash. This vulnerability affects Firefox < 128, Firefox ESR < 115.13, Thunderbird < 115.13, and Thunderbird < 128. | 2024-09-06 | 7.5 | CVE-2024-7652 | security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org |
| multivendorx -- multivendorx | The MultiVendorX - The Ultimate WooCommerce Multivendor Marketplace Solution plugin for WordPress is vulnerable to privilege escalation/de-escalation and account takeover due to an insufficient capability check on the update_item_permissions_check and create_item_permissions_check functions in all versions up to, and including, 4.2.0. This makes it possible for unauthenticated attackers to change the password of any user with the vendor role, create new users with the vendor role, and demote other users like administrators to the vendor role. | 2024-09-04 | 9.8 | CVE-2024-8289 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| n/a--Fusion | VMware Fusion (13.x before 13.6) contains a code-execution vulnerability due to the usage of an insecure environment variable. A malicious actor with standard user privileges may exploit this vulnerability to execute code in the context of the Fusion application. | 2024-09-03 | 8.8 | CVE-2024-38811 | security@vmware.com |
| n/a--n/a | PingCAP TiDB v8.1.0 was discovered to contain a buffer overflow via the component expression.ExplainExpressionList. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. | 2024-09-03 | 9.8 | CVE-2024-41433 | cve@mitre.org cve@mitre.org |
| n/a--n/a | Micron Crucial MX500 Series Solid State Drives M3CR046 is vulnerable to Buffer Overflow, which can be triggered by sending specially crafted ATA packets from the host to the drive controller. | 2024-09-04 | 9.8 | CVE-2024-42642 | cve@mitre.org cve@mitre.org |
| n/a--n/a | SQL Injection vulnerability in ESAFENET CDG 5.6 and before allows an attacker to execute arbitrary code via the id parameter of the data.jsp page. | 2024-09-05 | 9.1 | CVE-2024-42885 | cve@mitre.org |
| n/a--n/a | D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via sub47A60C function in the upgrade_filter.asp file | 2024-09-06 | 9.8 | CVE-2024-44401 | cve@mitre.org cve@mitre.org |
| n/a--n/a | D-Link DI-8100G 17.12.20A1 is vulnerable to Command Injection via msp_info.htm. | 2024-09-06 | 9.8 | CVE-2024-44402 | cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue in Vypor Attack API System v.1.0 allows a remote attacker to execute arbitrary code via the user GET parameter. | 2024-09-04 | 9.8 | CVE-2024-44808 | cve@mitre.org cve@mitre.org |
| n/a--n/a | A remote code execution (RCE) vulnerability exists in the Pi Camera project, version 1.0, maintained by RECANTHA. The issue arises from improper sanitization of user input passed to the "position" GET parameter in the tilt.php script. An attacker can exploit this by sending crafted input data that includes malicious command sequences, allowing arbitrary commands to be executed on the server with the privileges of the web server user. This vulnerability is exploitable remotely and poses significant risk if the application is exposed to untrusted networks. | 2024-09-03 | 9.8 | CVE-2024-44809 | cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue was discovered in Mbed TLS 3.6 before 3.6.1. A stack buffer overflow in mbedtls_ecdsa_der_to_raw() and mbedtls_ecdsa_raw_to_der() can occur when the bits parameter is larger than the largest supported curve. In some configurations with PSA disabled, all values of bits are affected. (This never happens in internal library calls, but can affect applications that call these functions directly.) | 2024-09-05 | 9.8 | CVE-2024-45158 | cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | ASIS (aka Aplikasi Sistem Sekolah using CodeIgniter 3) 3.0.0 through 3.2.0 allows index.php username SQL injection for Authentication Bypass. | 2024-09-02 | 9.8 | CVE-2024-45622 | cve@mitre.org |
| n/a--n/a | D-Link DAP-2310 Hardware A Firmware 1.16RC028 allows remote attackers to execute arbitrary code via a stack-based buffer overflow in the ATP binary that handles PHP HTTP GET requests for the Apache HTTP Server (httpd). NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | 2024-09-02 | 9.8 | CVE-2024-45623 | cve@mitre.org |
| n/a--n/a | H2O.ai H2O through 3.46.0.4 allows attackers to arbitrarily set the JDBC URL, leading to deserialization attacks, file reads, and command execution. Exploitation can occur when an attacker has access to post to the ImportSQLTable URI with a JSON document containing a connection_url property with any typical JDBC Connection URL attack payload such as one that uses queryInterceptors. | 2024-09-06 | 9.1 | CVE-2024-45758 | cve@mitre.org cve@mitre.org |
| n/a--n/a | Insufficient access checks in Visual Planning Admin Center 8 before v.1 Build 240207 allow attackers in possession of a non-administrative Visual Planning account to utilize functions normally reserved for administrators. The affected functions allow attackers to obtain different types of configured credentials and potentially elevate their privileges to administrator level. | 2024-09-03 | 8.8 | CVE-2023-49233 | cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue in the js_localize.php function of LimeSurvey v6.6.2 and before allows attackers to execute arbitrary code via injecting a crafted payload into the lng parameter of the js_localize.php function | 2024-09-03 | 8.8 | CVE-2024-42902 | cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | MCMS v5.4.1 has front-end file upload vulnerability which can lead to remote command execution. | 2024-09-03 | 8.1 | CVE-2024-42991 | cve@mitre.org |
| n/a--n/a | itsourcecode Alton Management System 1.0 is vulnerable to SQL Injection in /noncombo_save.php via the "menu" parameter. | 2024-09-05 | 8.8 | CVE-2024-44587 | cve@mitre.org |
| n/a--n/a | Sourcecodester Simple Forum Website v1.0 has a SQL injection vulnerability in /php-sqlite-forum/?page=manage_user&id=. | 2024-09-06 | 8.8 | CVE-2024-44739 | cve@mitre.org |
| n/a--n/a | SQL Injection vulnerability in ZZCMS v.2023 and before allows a remote attacker to obtain sensitive information via the id parameter in the adv2.php component. | 2024-09-04 | 8.8 | CVE-2024-44817 | cve@mitre.org |
| n/a--n/a | Tenda FH1201 v1.2.0.14 has a stack buffer overflow vulnerability in `formWrlExtraGet`. | 2024-09-04 | 8 | CVE-2024-44859 | cve@mitre.org |
| n/a--n/a | An issue was discovered in za-internet C-MOR Video Surveillance 5.2401. Due to improper or missing access control, low privileged users can use administrative functions of the C-MOR web interface. It was found out that different functions are only available to administrative users. However, access those functions is restricted via the web application user interface and not checked on the server side. Thus, by sending corresponding HTTP requests to the web server of the C-MOR web interface, low privileged users can also use administrative functionality, for instance downloading backup files or changing configuration settings. | 2024-09-04 | 8.1 | CVE-2024-45170 | cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue was discovered in za-internet C-MOR Video Surveillance 5.2401. Due to improper user input validation, it is possible to upload dangerous files, for instance PHP code, to the C-MOR system. By analyzing the C-MOR web interface, it was found out that the upload functionality for backup files allows an authenticated user to upload arbitrary files. The only condition is that the filename contains a .cbkf string. Therefore, webshell.cbkf.php is considered a valid file name for the C-MOR web application. Uploaded files are stored within the directory "/srv/www/backups" on the C-MOR system, and can thus be accessed via the URL https://<HOST>/backup/upload_<FILENAME>. Due to broken access control, low-privileged authenticated users can also use this file upload functionality. | 2024-09-05 | 8.8 | CVE-2024-45171 | cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue was discovered in za-internet C-MOR Video Surveillance 5.2401. Due to improper privilege management concerning sudo privileges, C-MOR is vulnerable to a privilege escalation attack. The Linux user www-data running the C-MOR web interface can execute some OS commands as root via Sudo without having to enter the root password. These commands, for example, include cp, chown, and chmod, which enable an attacker to modify the system's sudoers file in order to execute all commands with root privileges. Thus, it is possible to escalate the limited privileges of the user www-data to root privileges. | 2024-09-05 | 8.8 | CVE-2024-45173 | cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue was discovered in za-internet C-MOR Video Surveillance 5.2401 and 6.00PL01. Due to improper validation of user-supplied data, different functionalities of the C-MOR web interface are vulnerable to SQL injection attacks. This kind of attack allows an authenticated user to execute arbitrary SQL commands in the context of the corresponding MySQL database. | 2024-09-04 | 8.1 | CVE-2024-45174 | cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue was discovered in za-internet C-MOR Video Surveillance 5.2401. Sensitive information is stored in cleartext. It was found out that sensitive information, for example login credentials of cameras, is stored in cleartext. Thus, an attacker with filesystem access, for example exploiting a path traversal attack, has access to the login data of all configured cameras, or the configured FTP server. | 2024-09-05 | 8.8 | CVE-2024-45175 | cve@mitre.org cve@mitre.org |
| n/a--n/a | HIGH-LEIT V05.08.01.03 and HIGH-LEIT V04.25.00.00 to 4.25.01.01 for Windows from Vivavis contain an insecure file and folder permissions vulnerability in prunsrv.exe. A regular user (non-admin) can exploit the weak folder and file permissions to escalate privileges and execute arbitrary code in the context of NT AUTHORITY\SYSTEM. | 2024-09-03 | 7.8 | CVE-2024-38456 | cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | YugabyteDB v2.21.1.0 was discovered to contain a buffer overflow via the "insert into" parameter. | 2024-09-03 | 7.5 | CVE-2024-41435 | cve@mitre.org cve@mitre.org |
| n/a--n/a | ClickHouse v24.3.3.102 was discovered to contain a buffer overflow via the component DB::evaluateConstantExpressionImpl. | 2024-09-03 | 7.5 | CVE-2024-41436 | cve@mitre.org cve@mitre.org |
| n/a--n/a | D-Link DIR-823G v1.0.2B05_20181207 is vulnerable to Information Disclosure. The device allows unauthorized configuration file downloads, and the downloaded configuration files contain plaintext user passwords. | 2024-09-06 | 7.5 | CVE-2024-44408 | cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue was discovered in za-internet C-MOR Video Surveillance 5.2401. Due to improper user input validation, it is possible to download arbitrary files from the C-MOR system via a path traversal attack. It was found out that different functionalities are vulnerable to path traversal attacks, due to insufficient user input validation. For instance, the download functionality for backups provided by the script download-bkf.pml is vulnerable to a path traversal attack via the parameter bkf. This enables an authenticated user to download arbitrary files as Linux user www-data from the C-MOR system. Another path traversal attack is in the script show-movies.pml, which can be exploited via the parameter cam. | 2024-09-05 | 7.1 | CVE-2024-45178 | cve@mitre.org cve@mitre.org |
| n/a--n/a | A flaw was found in the gnome-remote-desktop package. The gnome-remote-desktop system daemon performs inadequate validation of session agents using D-Bus methods related to transitioning a client connection from the login screen to the user session. As a result, the system RDP TLS certificate and key can be exposed to unauthorized users. This flaw allows a malicious user on the system to take control of the RDP client connection during the login screen-to-user session transition. | 2024-09-02 | 7.5 | CVE-2024-5148 | secalert@redhat.com secalert@redhat.com secalert@redhat.com |
| nescalante -- urlregex | A vulnerability was found in nescalante urlregex up to 0.5.0 and classified as problematic. This issue affects some unknown processing of the file index.js of the component Backtracking. The manipulation leads to inefficient regular expression complexity. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 0.5.1 is able to address this issue. The identifier of the patch is e5a085afe6abfaea1d1a78f54c45af9ef43ca1f9. It is recommended to upgrade the affected component. | 2024-09-02 | 7.5 | CVE-2020-36830 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| onesoftnet -- sudobot | SudoBot, a Discord moderation bot, is vulnerable to privilege escalation and exploit of the `-config` command in versions prior to 9.26.7. Anyone is theoretically able to update any configuration of the bot and potentially gain control over the bot's settings. Every version of v9 before v9.26.7 is affected. Other versions (e.g. v8) are not affected. Users should upgrade to version 9.26.7 to receive a patch. A workaround would be to create a command permission overwrite in the Database. A SQL statement provided in the GitHub Security Advisor can be executed to create a overwrite that disallows users without `ManageGuild` permission to run the `-config` command. Run the SQL statement for every server the bot is in, and replace `<guild_id>` with the appropriate Guild ID each time. | 2024-09-03 | 9.8 | CVE-2024-45307 | security-advisories@github.com security-advisories@github.com |
| openatom -- openharmony | in OpenHarmony v4.1.0 and prior versions allow a local attacker arbitrary code execution in pre-installed apps through out-of-bounds write. | 2024-09-02 | 7.8 | CVE-2024-38386 | scy@openharmony.io |
| openatom -- openharmony | in OpenHarmony v4.1.0 and prior versions allow a remote attacker cause information leak through out-of-bounds Read. | 2024-09-02 | 7.5 | CVE-2024-39775 | scy@openharmony.io |
| openatom -- openharmony | in OpenHarmony v4.1.0 and prior versions allow a local attacker arbitrary code execution in pre-installed apps through out-of-bounds write. | 2024-09-02 | 7.8 | CVE-2024-39816 | scy@openharmony.io |
| openatom -- openharmony | in OpenHarmony v4.1.0 and prior versions allow a local attacker cause the common permission is upgraded to root and sensitive information leak through use after free. | 2024-09-02 | 7.8 | CVE-2024-41157 | scy@openharmony.io |
| openatom -- openharmony | in OpenHarmony v4.1.0 and prior versions allow a local attacker cause the common permission is upgraded to root and sensitive information leak through use after free. | 2024-09-02 | 7.8 | CVE-2024-41160 | scy@openharmony.io |
| OpenSSL--OpenSSL | Issue summary: Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address resulting in abnormal termination of the application process. Impact summary: Abnormal termination of an application can a cause a denial of service. Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address when comparing the expected name with an `otherName` subject alternative name of an X.509 certificate. This may result in an exception that terminates the application program. Note that basic certificate chain validation (signatures, dates, ...) is not affected, the denial of service can occur only when the application also specifies an expected DNS name, Email address or IP address. TLS servers rarely solicit client certificates, and even when they do, they generally don't perform a name check against a reference identifier (expected identity), but rather extract the presented identity after checking the certificate chain. So TLS servers are generally not affected and the severity of the issue is Moderate. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. | 2024-09-03 | 7.5 | CVE-2024-6119 | openssl-security@openssl.org openssl-security@openssl.org openssl-security@openssl.org openssl-security@openssl.org openssl-security@openssl.org |
| oretnom23 -- food_ordering_management_system | A vulnerability was found in SourceCodester Food Ordering Management System 1.0 and classified as critical. Affected by this issue is some unknown functionality of the file /routers/add-ticket.php. The manipulation of the argument id leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. | 2024-09-04 | 9.8 | CVE-2024-8415 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| oretnom23 -- food_ordering_management_system | A vulnerability was found in SourceCodester Food Ordering Management System 1.0. It has been classified as critical. This affects an unknown part of the file /routers/ticket-status.php. The manipulation of the argument ticket_id leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | 2024-09-04 | 9.8 | CVE-2024-8416 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| overwolf -- overwolf | A local privilege escalation is caused by Overwolf loading and executing certain dynamic link library files from a user-writeable folder in SYSTEM context on launch. This allows an attacker with unprivileged access to the system to run arbitrary code with SYSTEM privileges by placing a malicious .dll file in the respective location. | 2024-09-04 | 7.8 | CVE-2024-7834 | a341c0d1-ebf7-493f-a84e-38cf86618674 |
| phpgurukul -- job_portal | SQL injection vulnerability, by which an attacker could send a specially designed query through JOBREGID parameter in /jobportal/admin/applicants/controller.php, and retrieve all the information stored in it. | 2024-09-05 | 7.5 | CVE-2024-8464 | cve-coordination@incibe.es |
| phpgurukul -- job_portal | SQL injection vulnerability, by which an attacker could send a specially designed query through user_id parameter in /jobportal/admin/user/controller.php, and retrieve all the information stored in it. | 2024-09-05 | 7.5 | CVE-2024-8465 | cve-coordination@incibe.es |
| phpgurukul -- job_portal | SQL injection vulnerability, by which an attacker could send a specially designed query through CATEGORY parameter in /jobportal/admin/category/controller.php, and retrieve all the information stored in it. | 2024-09-05 | 7.5 | CVE-2024-8466 | cve-coordination@incibe.es |
| phpgurukul -- job_portal | SQL injection vulnerability, by which an attacker could send a specially designed query through id parameter in /jobportal/admin/category/index.php, and retrieve all the information stored in it. | 2024-09-05 | 7.5 | CVE-2024-8467 | cve-coordination@incibe.es |
| phpgurukul -- job_portal | SQL injection vulnerability, by which an attacker could send a specially designed query through search parameter in /jobportal/index.php, and retrieve all the information stored in it. | 2024-09-05 | 7.5 | CVE-2024-8468 | cve-coordination@incibe.es |
| phpgurukul -- job_portal | SQL injection vulnerability, by which an attacker could send a specially designed query through id parameter in /jobportal/admin/employee/index.php, and retrieve all the information stored in it. | 2024-09-05 | 7.5 | CVE-2024-8469 | cve-coordination@incibe.es |
| phpgurukul -- job_portal | SQL injection vulnerability, by which an attacker could send a specially designed query through CATEGORY parameter in /jobportal/admin/vacancy/controller.php, and retrieve all the information stored in it. | 2024-09-05 | 7.5 | CVE-2024-8470 | cve-coordination@incibe.es |
| PHPGurukul--Job Portal | File upload restriction bypass vulnerability in PHPGurukul Job Portal 1.0, the exploitation of which could allow an authenticated user to execute an RCE via webshell. | 2024-09-05 | 9.9 | CVE-2024-8463 | cve-coordination@incibe.es |
| progress -- openedge | Local ABL Client bypass of the required PASOE security checks may allow an attacker to commit unauthorized code injection into Multi-Session Agents on supported OpenEdge LTS platforms up to OpenEdge LTS 11.7.18 and LTS 12.2.13 on all supported release platforms | 2024-09-03 | 9.6 | CVE-2024-7345 | security@progress.com |
| Progress--LoadMaster | Improper Input Validation vulnerability in Progress LoadMaster allows OS Command Injection.This issue affects: * LoadMaster: 7.2.40.0 and above * ECS: All versions * Multi-Tenancy: 7.1.35.4 and above | 2024-09-05 | 10 | CVE-2024-7591 | security@progress.com |
| projectdiscovery--nuclei | Nuclei is a vulnerability scanner powered by YAML based templates. Starting in version 3.0.0 and prior to version 3.3.2, a vulnerability in Nuclei's template signature verification system could allow an attacker to bypass the signature check and possibly execute malicious code via custom code template. The vulnerability is present in the template signature verification process, specifically in the `signer` package. The vulnerability stems from a discrepancy between how the signature verification process and the YAML parser handle newline characters, combined with the way multiple signatures are processed. This allows an attacker to inject malicious content into a template while maintaining a valid signature for the benign part of the template. CLI users are affected if they execute custom code templates from unverified sources. This includes templates authored by third parties or obtained from unverified repositories. SDK Users are affected if they are developers integrating Nuclei into their platforms, particularly if they permit the execution of custom code templates by end-users. The vulnerability is addressed in Nuclei v3.3.2. Users are strongly recommended to update to this version to mitigate the security risk. As an interim measure, users should refrain from using custom templates if unable to upgrade immediately. Only trusted, verified templates should be executed. Those who are unable to upgrade Nuclei should disable running custom code templates as a workaround. | 2024-09-04 | 7.4 | CVE-2024-43405 | security-advisories@github.com security-advisories@github.com |
| python -- python | There is a MEDIUM severity vulnerability affecting CPython. Regular expressions that allowed excessive backtracking during tarfile.TarFile header parsing are vulnerable to ReDoS via specifically-crafted tar archives. | 2024-09-03 | 7.5 | CVE-2024-6232 | cna@python.org cna@python.org cna@python.org cna@python.org cna@python.org cna@python.org cna@python.org cna@python.org cna@python.org |
| QNAP Systems Inc.--QTS | An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. QuTScloud, QVR, QES are not affected. We have already fixed the vulnerability in the following versions: QTS 4.5.4.2790 build 20240605 and later QuTS hero h4.5.4.2626 build 20231225 and later | 2024-09-06 | 8.8 | CVE-2023-34974 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A path traversal vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to read the contents of unexpected files and expose sensitive data via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later | 2024-09-06 | 8.7 | CVE-2023-51366 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A cross-site scripting (XSS) vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to inject malicious code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later | 2024-09-06 | 8.9 | CVE-2024-21897 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later | 2024-09-06 | 8.8 | CVE-2024-21898 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A missing authorization vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow local authenticated users to access data or perform actions that they should not be allowed to perform via unspecified vectors. QuTScloud, is not affected. We have already fixed the vulnerability in the following versions: QTS 5.2.0.2737 build 20240417 and later QuTS hero h5.2.0.2782 build 20240601 and later | 2024-09-06 | 7.8 | CVE-2023-39298 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | An OS command injection vulnerability has been reported to affect legacy QTS. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 4.3.6.2805 build 20240619 and later QTS 4.3.4.2814 build 20240618 and later QTS 4.3.3.2784 build 20240619 and later QTS 4.2.6 build 20240618 and later | 2024-09-06 | 7.2 | CVE-2023-39300 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QuLog Center | A cross-site scripting (XSS) vulnerability has been reported to affect QuLog Center. If exploited, the vulnerability could allow users to inject malicious code via a network. We have already fixed the vulnerability in the following versions: QuLog Center 1.8.0.872 ( 2024/06/17 ) and later QuLog Center 1.7.0.827 ( 2024/06/17 ) and later | 2024-09-06 | 8.2 | CVE-2024-32762 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--Video Station | A SQL injection vulnerability has been reported to affect Video Station. If exploited, the vulnerability could allow authenticated users to inject malicious code via a network. We have already fixed the vulnerability in the following version: Video Station 5.8.1 ( 2024/02/26 ) and later | 2024-09-06 | 8.8 | CVE-2023-50360 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--Video Station | An OS command injection vulnerability has been reported to affect Video Station. If exploited, the vulnerability could allow authenticated users to execute commands via a network. We have already fixed the vulnerability in the following version: Video Station 5.8.2 and later | 2024-09-06 | 7.4 | CVE-2023-47563 | security@qnapsecurity.com.tw |
| qualcomm -- 315_5g_iot_firmware | Transient DOS while processing TIM IE from beacon frame as there is no check for IE length. | 2024-09-02 | 7.5 | CVE-2024-33051 | product-security@qualcomm.com |
| qualcomm -- 315_5g_iot_firmware | Memory corruption when two threads try to map and unmap a single node simultaneously. | 2024-09-02 | 7.8 | CVE-2024-33060 | product-security@qualcomm.com |
| qualcomm -- apq8017_firmware | Memory corruption when Alternative Frequency offset value is set to 255. | 2024-09-02 | 7.8 | CVE-2024-33042 | product-security@qualcomm.com |
| qualcomm -- apq8017_firmware | Memory corruption when user provides data for FM HCI command control operations. | 2024-09-02 | 7.8 | CVE-2024-33052 | product-security@qualcomm.com |
| qualcomm -- ar8035_firmware | Memory corruption when BTFM client sends new messages over Slimbus to ADSP. | 2024-09-02 | 7.8 | CVE-2024-33045 | product-security@qualcomm.com |
| qualcomm -- ar8035_firmware | Transient DOS while parsing the received TID-to-link mapping element of beacon/probe response frame. | 2024-09-02 | 7.5 | CVE-2024-33048 | product-security@qualcomm.com |
| qualcomm -- ar8035_firmware | Transient DOS while parsing MBSSID during new IE generation in beacon/probe frame when IE length check is either missing or improper. | 2024-09-02 | 7.5 | CVE-2024-33050 | product-security@qualcomm.com |
| qualcomm -- ar8035_firmware | Transient DOS while parsing the multi-link element Control field when common information length check is missing before updating the location. | 2024-09-02 | 7.5 | CVE-2024-33057 | product-security@qualcomm.com |
| qualcomm -- ar8035_firmware | Memory corruption while processing concurrent IOCTL calls. | 2024-09-02 | 7.8 | CVE-2024-38401 | product-security@qualcomm.com |
| qualcomm -- ar8035_firmware | Memory corruption while processing IOCTL call for getting group info. | 2024-09-02 | 7.8 | CVE-2024-38402 | product-security@qualcomm.com |
| qualcomm -- fastconnect_6700_firmware | Memory corruption while passing untrusted/corrupted pointers from DSP to EVA. | 2024-09-02 | 7.8 | CVE-2024-33038 | product-security@qualcomm.com |
| qualcomm -- fastconnect_6700_firmware | Memory corruption when the captureRead QDCM command is invoked from user-space. | 2024-09-02 | 7.8 | CVE-2024-33047 | product-security@qualcomm.com |
| qualcomm -- fastconnect_6700_firmware | Memory corruption during the handshake between the Primary Virtual Machine and Trusted Virtual Machine. | 2024-09-02 | 7.8 | CVE-2024-33054 | product-security@qualcomm.com |
| Qualcomm, Inc.--Snapdragon | Information disclosure while decoding Tracking Area Update Accept or Attach Accept message received from network. | 2024-09-02 | 8.2 | CVE-2024-23359 | product-security@qualcomm.com |
| Qualcomm, Inc.--Snapdragon | Memory corruption while releasing shared resources in MinkSocket listener thread. | 2024-09-02 | 8.4 | CVE-2024-23365 | product-security@qualcomm.com |
| Qualcomm, Inc.--Snapdragon | Memory corruption while calculating total metadata size when a very high reserved size is requested by gralloc clients. | 2024-09-02 | 8.4 | CVE-2024-33035 | product-security@qualcomm.com |
| Qualcomm, Inc.--Snapdragon | Transient DOS when registration accept OTA is received with incorrect ciphering key data IE in Modem. | 2024-09-02 | 7.5 | CVE-2024-23358 | product-security@qualcomm.com |
| Qualcomm, Inc.--Snapdragon | Cryptographic issue while parsing RSA keys in COBR format. | 2024-09-02 | 7.1 | CVE-2024-23362 | product-security@qualcomm.com |
| Qualcomm, Inc.--Snapdragon | Transient DOS when processing the non-transmitted BSSID profile sub-elements present within the MBSSID Information Element (IE) of a beacon frame that is received from over-the-air (OTA). | 2024-09-02 | 7.5 | CVE-2024-23364 | product-security@qualcomm.com |
| quinn-rs--quinn | Quinn is a pure-Rust, async-compatible implementation of the IETF QUIC transport protocol. As of quinn-proto 0.11, it is possible for a server to `accept()`, `retry()`, `refuse()`, or `ignore()` an `Incoming` connection. However, calling `retry()` on an unvalidated connection exposes the server to a likely panic in the following situations: 1. Calling `refuse` or `ignore` on the resulting validated connection, if a duplicate initial packet is received. This issue can go undetected until a server's `refuse()`/`ignore()` code path is exercised, such as to stop a denial of service attack. 2. Accepting when the initial packet for the resulting validated connection fails to decrypt or exhausts connection IDs, if a similar initial packet that successfully decrypts and doesn't exhaust connection IDs is received. This issue can go undetected if clients are well-behaved. The former situation was observed in a real application, while the latter is only theoretical. | 2024-09-02 | 7.5 | CVE-2024-45311 | security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| Red Hat--Migration Toolkit for Virtualization | A vulnerability was found in Forklift Controller. There is no verification against the authorization header except to ensure it uses bearer authentication. Without an Authorization header and some form of a Bearer token, a 401 error occurs. The presence of a token value provides a 200 response with the requested information. | 2024-09-06 | 7.5 | CVE-2024-8509 | secalert@redhat.com secalert@redhat.com |
| redhat -- satellite | An authentication bypass vulnerability has been identified in Foreman when deployed with External Authentication, due to the puppet-foreman configuration. This issue arises from Apache's mod_proxy not properly unsetting headers because of restrictions on underscores in HTTP headers, allowing authentication through a malformed header. This flaw impacts all active Satellite deployments (6.13, 6.14 and 6.15) and could potentially enable unauthorized users to gain administrative access. | 2024-09-04 | 9.8 | CVE-2024-7012 | secalert@redhat.com secalert@redhat.com secalert@redhat.com secalert@redhat.com secalert@redhat.com |
| redhat -- satellite | An authentication bypass vulnerability has been identified in Pulpcore when deployed with Gunicorn versions prior to 22.0, due to the puppet-pulpcore configuration. This issue arises from Apache's mod_proxy not properly unsetting headers because of restrictions on underscores in HTTP headers, allowing authentication through a malformed header. This flaw impacts all active Satellite deployments (6.13, 6.14 and 6.15) which are using Pulpcore version 3.0+ and could potentially enable unauthorized users to gain administrative access. | 2024-09-04 | 9.8 | CVE-2024-7923 | secalert@redhat.com secalert@redhat.com secalert@redhat.com secalert@redhat.com secalert@redhat.com |
| rems -- contact_manager_with_export_to_vcf | A vulnerability was found in SourceCodester Contact Manager with Export to VCF 1.0. It has been rated as critical. This issue affects some unknown processing of the file /endpoint/delete-account.php of the component Delete Contact Handler. The manipulation of the argument contact leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. | 2024-09-03 | 9.8 | CVE-2024-8380 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| rust-lang--rust | Rust is a programming language. The fix for CVE-2024-24576, where `std::process::Command` incorrectly escaped arguments when invoking batch files on Windows, was incomplete. Prior to Rust version 1.81.0, it was possible to bypass the fix when the batch file name had trailing whitespace or periods (which are ignored and stripped by Windows). To determine whether to apply the `cmd.exe` escaping rules, the original fix for the vulnerability checked whether the command name ended with `.bat` or `.cmd`. At the time that seemed enough, as we refuse to invoke batch scripts with no file extension. Windows removes trailing whitespace and periods when parsing file paths. For example, `.bat. .` is interpreted by Windows as `.bat`, but the original fix didn't check for that. Affected users who are using Rust 1.77.2 or greater can remove the trailing whitespace (ASCII 0x20) and trailing periods (ASCII 0x2E) from the batch file name to bypass the incomplete fix and enable the mitigations. Users are affected if their code or one of their dependencies invoke a batch script on Windows with trailing whitespace or trailing periods in the name, and pass untrusted arguments to it. Rust 1.81.0 will update the standard library to apply the CVE-2024-24576 mitigations to all batch files invocations, regardless of the trailing chars in the file name. | 2024-09-04 | 8.1 | CVE-2024-43402 | security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| sambas -- akos | Improper Privilege Management vulnerability in SAMPA? Holding AKOS allows Collect Data as Provided by Users.This issue affects AKOS: through 20240902. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-03 | 9.8 | CVE-2024-4259 | iletisim@usom.gov.tr |
| samsung -- android | Improper handling of exceptional conditions in ThemeCenter prior to SMR Sep-2024 Release 1 allows local attackers to delete non-preloaded applications. | 2024-09-04 | 7.1 | CVE-2024-34638 | mobile.security@samsung.com |
| samsung -- notes | Stack-based out-of-bounds write in Samsung Notes prior to version 4.4.21.62 allows remote attackers to execute arbitrary code. | 2024-09-04 | 9.8 | CVE-2024-34657 | mobile.security@samsung.com |
| samsung -- notes | Path traversal in Samsung Notes prior to version 4.4.21.62 allows local attackers to execute arbitrary code. | 2024-09-04 | 7.8 | CVE-2024-34656 | mobile.security@samsung.com |
| samsung -- notes | Out-of-bounds read in Samsung Notes allows local attackers to bypass ASLR. | 2024-09-04 | 7.1 | CVE-2024-34658 | mobile.security@samsung.com |
| samsung -- notes | Heap-based out-of-bounds write in Samsung Notes prior to version 4.4.21.62 allows local attackers to execute arbitrary code. | 2024-09-04 | 7.8 | CVE-2024-34660 | mobile.security@samsung.com |
| SaturdayDrive--Ninja Forms - File Uploads | The Ninja Forms - File Uploads plugin for WordPress is vulnerable to Stored Cross-Site Scripting via an uploaded file (e.g. RTX file) in all versions up to, and including, 3.3.16 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-09-07 | 7.2 | CVE-2024-1596 | security@wordfence.com security@wordfence.com security@wordfence.com |
| seacms -- seacms | SeaCMS v12.9 was discovered to contain a SQL injection vulnerability via the id parameter at /dmplayer/dmku/index.php?ac=del. | 2024-09-03 | 9.8 | CVE-2024-44921 | cve@mitre.org |
| semtekyazilim -- semtek_sempos | Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Semtek Informatics Software Consulting Inc. Semtek Sempos allows Blind SQL Injection.This issue affects Semtek Sempos: through 31072024. | 2024-09-04 | 9.8 | CVE-2024-7076 | iletisim@usom.gov.tr |
| semtekyazilim -- semtek_sempos | Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Semtek Informatics Software Consulting Inc. Semtek Sempos allows SQL Injection.This issue affects Semtek Sempos: through 31072024. | 2024-09-04 | 9.8 | CVE-2024-7078 | iletisim@usom.gov.tr |
| sirv--Image Optimizer, Resizer and CDN Sirv | The Image Optimizer, Resizer and CDN - Sirv plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'sirv_save_prevented_sizes' function in all versions up to, and including, 7.2.7. This makes it possible for authenticated attackers, with Contributor-level access and above, to exploit the 'sirv_upload_file_by_chunks_callback' function, which lacks proper file type validation, allowing attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. | 2024-09-06 | 8.8 | CVE-2024-8480 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| SourceCodesters--Clinics Patient Management System | A vulnerability was found in SourceCodesters Clinics Patient Management System 2.0. It has been rated as critical. This issue affects some unknown processing of the file /print_diseases.php. The manipulation of the argument disease/from/to leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. | 2024-09-07 | 7.3 | CVE-2024-8565 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SpectoLabs--hoverfly | Hoverfly is a lightweight service virtualization/ API simulation / API mocking tool for developers and testers. The `/api/v2/simulation` POST handler allows users to create new simulation views from the contents of a user-specified file. This feature can be abused by an attacker to read arbitrary files from the Hoverfly server. Note that, although the code prevents absolute paths from being specified, an attacker can escape out of the `hf.Cfg.ResponsesBodyFilesPath` base path by using `../` segments and reach any arbitrary files. This issue was found using the Uncontrolled data used in path expression CodeQL query for python. Users are advised to make sure the final path (`filepath.Join(hf.Cfg.ResponsesBodyFilesPath, filePath)`) is contained within the expected base path (`filepath.Join(hf.Cfg.ResponsesBodyFilesPath, "/")`). This issue is also tracked as GHSL-2023-274. | 2024-09-02 | 7.5 | CVE-2024-45388 | security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| SPIP--SPIP | SPIP before 4.3.2, 4.2.16, and 4.1.18 is vulnerable to a command injection issue. A remote and unauthenticated attacker can execute arbitrary operating system commands by sending a crafted multipart file upload HTTP request. | 2024-09-06 | 9.8 | CVE-2024-8517 | disclosure@vulncheck.com disclosure@vulncheck.com disclosure@vulncheck.com |
| stripe--stripe-cli | stripe-cli is a command-line tool for the payment processor Stripe. A vulnerability exists in stripe-cli starting in version 1.11.1 and prior to version 1.21.3 where a plugin package containing a manifest with a malformed plugin shortname installed using the --archive-url or --archive-path flags can overwrite arbitrary files. The update in version 1.21.3 addresses the path traversal vulnerability by removing the ability to install plugins from an archive URL or path. There has been no evidence of exploitation of this vulnerability. | 2024-09-05 | 7.5 | CVE-2024-45401 | security-advisories@github.com security-advisories@github.com |
| symphonyfintech -- xts_mobile_trader | This vulnerability exists due to improper access controls on APIs in the Authentication module of Symphony XTS Web Trading and Mobile Trading platforms (version 2.0.0.1_P160). An authenticated remote attacker could exploit this vulnerability by manipulating parameters through HTTP request which could lead to unauthorized account take over belonging to other users. | 2024-09-03 | 8.8 | CVE-2024-45586 | vdisclose@cert-in.org.in |
| symphonyfintech -- xts_mobile_trader | This vulnerability exists in Symphony XTS Web Trading platform version 2.0.0.1_P160 due to improper access controls on APIs in the Transaction module of vulnerable application. An authenticated remote attacker could exploit this vulnerability by manipulating parameters through HTTP request which could lead to compromise of other user accounts. | 2024-09-03 | 8.8 | CVE-2024-45587 | vdisclose@cert-in.org.in |
| symphonyfintech -- xts_mobile_trader | This vulnerability exists in Symphony XTS Web Trading platform version 2.0.0.1_P160 due to improper access controls on APIs in the Preference module of the application. An authenticated remote attacker could exploit this vulnerability by manipulating parameters through HTTP request which could lead to unauthorized access and modification of sensitive information belonging to other users. | 2024-09-03 | 8.1 | CVE-2024-45588 | vdisclose@cert-in.org.in |
| tinacms--tinacms | Tina is an open-source content management system (CMS). Sites building with Tina CMS's command line interface (CLI) prior to version 1.6.2 that use a search token may be vulnerable to the search token being leaked via lock file (tina-lock.json). Administrators of Tina-enabled websites with search setup should rotate their key immediately. This issue has been patched in @tinacms/cli version 1.6.2. Upgrading and rotating the search token is required for the proper fix. | 2024-09-03 | 7.5 | CVE-2024-45391 | security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| TOTOLINK--AC1200 T8 | A vulnerability, which was classified as critical, was found in TOTOLINK AC1200 T8 and AC1200 T10 4.1.5cu.861_B20230220/4.1.8cu.5207. This affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument desc leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-08 | 8.8 | CVE-2024-8573 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| TOTOLINK--AC1200 T8 | A vulnerability was found in TOTOLINK AC1200 T8 4.1.5cu.861_B20230220 and classified as critical. This issue affects the function setWiFiScheduleCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument desc leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-08 | 8.8 | CVE-2024-8575 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| TOTOLINK--AC1200 T8 | A vulnerability was found in TOTOLINK AC1200 T8 and AC1200 T10 4.1.5cu.861_B20230220/4.1.8cu.5207. It has been classified as critical. Affected is the function setIpPortFilterRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument desc leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-08 | 8.8 | CVE-2024-8576 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| TOTOLINK--AC1200 T8 | A vulnerability was found in TOTOLINK AC1200 T8 and AC1200 T10 4.1.5cu.861_B20230220/4.1.8cu.5207. It has been declared as critical. Affected by this vulnerability is the function setStaticDhcpRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument desc leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-08 | 8.8 | CVE-2024-8577 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| TOTOLINK--AC1200 T8 | A vulnerability was found in TOTOLINK AC1200 T8 4.1.5cu.861_B20230220. It has been rated as critical. Affected by this issue is the function setWiFiMeshName of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument device_name leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-08 | 8.8 | CVE-2024-8578 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| TOTOLINK--AC1200 T8 | A vulnerability classified as critical has been found in TOTOLINK AC1200 T8 4.1.5cu.861_B20230220. This affects the function setWiFiRepeaterCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument password leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-08 | 8.8 | CVE-2024-8579 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| TOTOLINK--AC1200 T8 | A vulnerability classified as critical was found in TOTOLINK AC1200 T8 4.1.5cu.861_B20230220. This vulnerability affects unknown code of the file /etc/shadow.sample. The manipulation leads to use of hard-coded password. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-08 | 8.1 | CVE-2024-8580 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| trellix -- intrusion_prevention_system_manager | This vulnerability allows unauthenticated remote attackers to bypass authentication and gain APIs access of the Manager. | 2024-09-05 | 7.5 | CVE-2024-5957 | trellixpsirt@trellix.com |
| Ultimaker--Cura | UltiMaker Cura slicer versions 5.7.0-beta.1 through 5.7.2 are vulnerable to code injection via the 3MF format reader (/plugins/ThreeMFReader.py). The vulnerability arises from improper handling of the drop_to_buildplate property within 3MF files, which are ZIP archives containing the model data. When a 3MF file is loaded in Cura, the value of the drop_to_buildplate property is passed to the Python eval() function without proper sanitization, allowing an attacker to execute arbitrary code by crafting a malicious 3MF file. This vulnerability poses a significant risk as 3MF files are commonly shared via 3D model databases. | 2024-09-03 | 7.8 | CVE-2024-8374 | 596c5446-0ce5-4ba2-aa66-48b3b757a647 |
| ultimatemember--ForumWP Forum & Discussion Board Plugin | The ForumWP - Forum & Discussion Board Plugin plugin for WordPress is vulnerable to Privilege Escalation via Insecure Direct Object Reference in all versions up to, and including, 2.0.2 via the submit_form_handler due to missing validation on the 'user_id' user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to change the email address of administrative user accounts which can then be leveraged to reset the administrative users password and gain access to their account. | 2024-09-06 | 8.8 | CVE-2024-8428 | security@wordfence.com security@wordfence.com |
| Unknown--Sensei LMS | The Sensei LMS WordPress plugin before 4.24.2 does not properly protect some its REST API routes, allowing unauthenticated attackers to leak email templates. | 2024-09-04 | 7.5 | CVE-2024-7786 | contact@wpscan.com |
| Unknown--Viral Signup | The Viral Signup WordPress plugin through 2.1 does not properly sanitise and escape a parameter before using it in a SQL statement via an AJAX action available to unauthenticated users, leading to a SQL injection | 2024-09-04 | 9.8 | CVE-2024-6926 | contact@wpscan.com |
| virtualmin -- virtualmin | Webmin before 2.202 and Virtualmin before 7.20.2 allow a network traffic loop via spoofed UDP packets on port 10000. | 2024-09-04 | 7.5 | CVE-2024-45692 | cve@mitre.org cve@mitre.org cve@mitre.org |
| whyun--WPCOM Member | The WPCOM Member plugin for WordPress is vulnerable to privilege escalation in all versions up to, and including, 1.5.2.1. This is due to the plugin allowing arbitrary data to be passed to wp_insert_user() during registration. This makes it possible for unauthenticated attackers to update their role to that of an administrator during registration. | 2024-09-06 | 9.8 | CVE-2024-7493 | security@wordfence.com security@wordfence.com |
| wpextended -- wp_extended | The The Ultimate WordPress Toolkit - WP Extended plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the module_all_toggle_ajax() function in all versions up to, and including, 3.0.8. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access to a vulnerable site. | 2024-09-04 | 8.8 | CVE-2024-8102 | security@wordfence.com security@wordfence.com security@wordfence.com |
| wpjobportal--WP Job Portal A Complete Recruitment System for Company or Job Board website | The WP Job Portal - A Complete Recruitment System for Company or Job Board website plugin for WordPress is vulnerable to Local File Inclusion, Arbitrary Settings Update, and User Creation in all versions up to, and including, 2.1.6 via several functions called by the 'checkFormRequest' function. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other "safe" file types can be uploaded and included. Attackers can also update arbitrary settings and create user accounts even when registration is disabled, leading to user creation with a default role of Administrator. | 2024-09-04 | 9.8 | CVE-2024-7950 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| wppost--WP-Recall Registration, Profile, Commerce & More | The WP-Recall - Registration, Profile, Commerce & More plugin for WordPress is vulnerable to privilege escalation/account takeover in all versions up to, and including, 16.26.8. This is due to to plugin not properly verifying a user's identity during new order creation. This makes it possible for unauthenticated attackers to supply any email through the user_email field and update the password for that user during new order creation. This requires the commerce addon to be enabled in order to exploit. | 2024-09-06 | 9.8 | CVE-2024-8292 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| yandex -- yandex_browser | Yandex Browser for Desktop before 24.7.1.380 has a DLL Hijacking Vulnerability because an untrusted search path is used. | 2024-09-03 | 7.8 | CVE-2024-6473 | browser-security@yandex-team.ru |
| zyxel -- nebula_lte3301-plus_firmware | A buffer overflow vulnerability in the library "libclinkc" of the Zyxel VMG8825-T50K firmware version 5.50(ABOM.8)C0 could allow an unauthenticated attacker to cause denial of service (DoS) conditions by sending a crafted HTTP request to a vulnerable device. | 2024-09-03 | 7.5 | CVE-2024-5412 | security@zyxel.com.tw |
| zyxel -- zld_firmware | A command injection vulnerability in the IPSec VPN feature of Zyxel ATP series firmware versions from V4.32 through V5.38, USG FLEX series firmware versions from V4.50 through V5.38, USG FLEX 50(W) series firmware versions from V4.16 through V5.38, and USG20(W)-VPN series firmware versions from V4.16 through V5.38 could allow an unauthenticated attacker to execute some OS commands on an affected device by sending a crafted username to the vulnerable device. Note that this attack could be successful only if the device was configured in User-Based-PSK authentication mode and a valid user with a long username exceeding 28 characters exists. | 2024-09-03 | 8.1 | CVE-2024-42057 | security@zyxel.com.tw |
| zyxel -- zld_firmware | A null pointer dereference vulnerability in Zyxel ATP series firmware versions from V4.32 through V5.38, USG FLEX series firmware versions from V4.50 through V5.38, USG FLEX 50(W) series firmware versions from V5.20 through V5.38, and USG20(W)-VPN series firmware versions from V5.20 through V5.38 could allow an unauthenticated attacker to cause DoS conditions by sending crafted packets to a vulnerable device. | 2024-09-03 | 7.5 | CVE-2024-42058 | security@zyxel.com.tw |
| zyxel -- zld_firmware | A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V5.00 through V5.38, USG FLEX series firmware versions from V5.00 through V5.38, USG FLEX 50(W) series firmware versions from V5.00 through V5.38, and USG20(W)-VPN series firmware versions from V5.00 through V5.38 could allow an authenticated attacker with administrator privileges to execute some OS commands on an affected device by uploading a crafted compressed language file via FTP. | 2024-09-03 | 7.2 | CVE-2024-42059 | security@zyxel.com.tw |
| zyxel -- zld_firmware | A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.32 through V5.38, USG FLEX series firmware versions from V4.50 through V5.38, USG FLEX 50(W) series firmware versions from V4.16 through V5.38, and USG20(W)-VPN series firmware versions from V4.16 through V5.38 could allow an authenticated attacker with administrator privileges to execute some OS commands on an affected device by uploading a crafted internal user agreement file to the vulnerable device. | 2024-09-03 | 7.2 | CVE-2024-42060 | security@zyxel.com.tw |
| zyxel -- zld_firmware | A post-authentication command injection vulnerability in Zyxel ATP series firmware versions from V4.60 through V5.38 and USG FLEX series firmware versions from V4.60 through V5.38 could allow an authenticated attacker with administrator privileges to execute some operating system (OS) commands on an affected device by executing a crafted CLI command. | 2024-09-03 | 7.2 | CVE-2024-7203 | security@zyxel.com.tw |
| Zyxel--NWA1123ACv3 firmware | The improper neutralization of special elements in the parameter "host" in the CGI program of Zyxel NWA1123ACv3 firmware version 6.70(ABVT.4) and earlier, WAC500 firmware version 6.70(ABVS.4) and earlier, WAX655E firmware version 7.00(ACDO.1) and earlier, WBE530 firmware version 7.00(ACLE.1) and earlier, and USG LITE 60AX firmware version V2.00(ACIP.2) could allow an unauthenticated attacker to execute OS commands by sending a crafted cookie to a vulnerable device. | 2024-09-03 | 9.8 | CVE-2024-7261 | security@zyxel.com.tw |
Medium Vulnerabilities
| Primary Vendor -- Product | Description | Published | CVSS Score | Source Info | Patch Info |
|---|---|---|---|---|---|
| 3ds -- 3dexperience | A stored Cross-site Scripting (XSS) vulnerability affecting 3DDashboard in 3DSwymer Release on 3DEXPERIENCE R2024x allows an attacker to execute arbitrary script code in user's browser session. | 2024-09-02 | 5.4 | CVE-2024-7932 | 3DS.Information-Security@3ds.com |
| 3ds -- 3dexperience | A stored Cross-site Scripting (XSS) vulnerability affecting 3DDashboard in 3DSwymer from Release 3DEXPERIENCE R2023x through Release 3DEXPERIENCE R2024x allows an attacker to execute arbitrary script code in user's browser session. | 2024-09-02 | 5.4 | CVE-2024-7938 | 3DS.Information-Security@3ds.com |
| 3ds -- 3dexperience | A stored Cross-site Scripting (XSS) vulnerability affecting 3DSwym in 3DSwymer Release on 3DEXPERIENCE R2024x allows an attacker to execute arbitrary script code in user's browser session. | 2024-09-02 | 5.4 | CVE-2024-7939 | 3DS.Information-Security@3ds.com |
| 3ds -- 3dexperience_enovia | A stored Cross-site Scripting (XSS) vulnerability affecting ENOVIA Collaborative Industry Innovator from Release 3DEXPERIENCE R2022x through Release 3DEXPERIENCE R2024x allows an attacker to execute arbitrary script code in user's browser session. | 2024-09-02 | 5.4 | CVE-2024-8004 | 3DS.Information-Security@3ds.com |
| abcd-community -- abcd | A vulnerability, which was classified as problematic, has been found in ABCD ABCD2 up to 2.2.0-beta-1. This issue affects some unknown processing of the file /buscar_integrada.php. The manipulation of the argument Sub_Expresion leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-04 | 4.3 | CVE-2024-8411 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| adobe -- acrobat | Acrobat Reader versions 20.005.30636, 24.002.20964, 24.001.30123, 24.002.20991 and earlier are affected by a Use After Free vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | 2024-09-05 | 5.5 | CVE-2024-45107 | psirt@adobe.com |
| advplyr--audiobookshelf | audiobookshelf is a self-hosted audiobook and podcast server. A non-admin user is not allowed to create libraries (or access only the ones they have permission to). However, the `LibraryController` is missing the check for admin user and thus allows a path traversal issue. Allowing non-admin users to write to any directory in the system can be seen as a form of path traversal. However, since it can be restricted to only admin permissions, fixing this is relatively simple and falls more into the realm of Role-Based Access Control (RBAC). This issue has been addressed in release version 2.13.0. All users are advised to upgrade. There are no known workarounds for this vulnerability. | 2024-09-02 | 6.3 | CVE-2024-43797 | security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| alfio-event--alf.io | alf.io is an open source ticket reservation system for conferences, trade shows, workshops, and meetups. Prior to version 2.0-M5, the preloaded data as json is not escaped correctly, the administrator / event admin could break their own install by inserting non correctly escaped text. The Content-Security-Policy directive blocks any potential script execution. The administrator or event administrator can override the texts for customization purpose. The texts are not properly escaped. Version 2.0-M5 fixes this issue. | 2024-09-06 | 6.5 | CVE-2024-45299 | security-advisories@github.com security-advisories@github.com |
| alwindoss -- akademy | A vulnerability was found in alwindoss akademy up to 35caccea888ed63d5489e211c99edff1f62efdba. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file cmd/akademy/handler/handlers.go. The manipulation of the argument emailAddress leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. | 2024-09-04 | 5.4 | CVE-2024-8407 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| ameliabooking--Booking for Appointments and Events Calendar Amelia Premium | The Booking for Appointments and Events Calendar - Amelia Premium and Lite plugins for WordPress are vulnerable to unauthorized access of data due to a missing capability check on the 'ameliaButtonCommand' function in all versions up to, and including, Premium 7.7 and Lite 1.2.3. This makes it possible for unauthenticated attackers to access employee calendar details, including Google Calendar OAuth tokens in the premium version. | 2024-09-05 | 6.5 | CVE-2024-6332 | security@wordfence.com security@wordfence.com security@wordfence.com |
| angeljudesuarez -- event_management_system | Sourcecodehero Event Management System 1.0 allows Stored Cross-Site Scripting via parameters Full Name, Address, Email, and contact# in /clientdetails/admin/regester.php. | 2024-09-05 | 6.1 | CVE-2024-44728 | cve@mitre.org |
| ankitpokhrel--Dynamic Featured Image | The Dynamic Featured Image plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'dfiFeatured' parameter in all versions up to, and including, 3.7.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-09-05 | 6.4 | CVE-2024-6929 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| asterisk--asterisk | Asterisk is an open-source private branch exchange (PBX). Prior to versions 18.24.3, 20.9.3, and 21.4.3 of Asterisk and versions 18.9-cert12 and 20.7-cert2 of certified-asterisk, if Asterisk attempts to send a SIP request to a URI whose host portion starts with `.1` or `[.1]`, and res_resolver_unbound is loaded, Asterisk will crash with a SEGV. To receive a patch, users should upgrade to one of the following versions: 18.24.3, 20.9.3, 21.4.3, certified-18.9-cert12, certified-20.7-cert2. Two workarounds are available. Disable res_resolver_unbound by setting `noload = res_resolver_unbound.so` in modules.conf, or set `rewrite_contact = yes` on all PJSIP endpoints. NOTE: This may not be appropriate for all Asterisk configurations. | 2024-09-05 | 5.7 | CVE-2024-42491 | security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| blockspare--Blockspare: Gutenberg Blocks & Patterns for Blogs, Magazines, Business Sites Post Grids, Sliders, Carousels, Counters, Page Builder & Starter Site Imports, No Coding Needed | The Blockspare: Gutenberg Blocks & Patterns for Blogs, Magazines, Business Sites - Post Grids, Sliders, Carousels, Counters, Page Builder & Starter Site Imports, No Coding Needed plugin for WordPress is vulnerable to Stored Cross-Site Scripting via several parameters in the 'blockspare_render_social_sharing_block' function in all versions up to, and including, 3.2.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-09-04 | 6.4 | CVE-2024-8325 | security@wordfence.com security@wordfence.com |
| Byron--gitoxide | `gix-path` is a crate of the `gitoxide` project (an implementation of `git` written in Rust) dealing paths and their conversions. Prior to version 0.10.11, `gix-path` runs `git` to find the path of a configuration file associated with the `git` installation, but improperly resolves paths containing unusual or non-ASCII characters, in rare cases enabling a local attacker to inject configuration leading to code execution. Version 0.10.11 contains a patch for the issue. In `gix_path::env`, the underlying implementation of the `installation_config` and `installation_config_prefix` functions calls `git config -l --show-origin` to find the path of a file to treat as belonging to the `git` installation. Affected versions of `gix-path` do not pass `-z`/`--null` to cause `git` to report literal paths. Instead, to cover the occasional case that `git` outputs a quoted path, they attempt to parse the path by stripping the quotation marks. The problem is that, when a path is quoted, it may change in substantial ways beyond the concatenation of quotation marks. If not reversed, these changes can result in another valid path that is not equivalent to the original. On a single-user system, it is not possible to exploit this, unless `GIT_CONFIG_SYSTEM` and `GIT_CONFIG_GLOBAL` have been set to unusual values or Git has been installed in an unusual way. Such a scenario is not expected. Exploitation is unlikely even on a multi-user system, though it is plausible in some uncommon configurations or use cases. In general, exploitation is more likely to succeed if users are expected to install `git` themselves, and are likely to do so in predictable locations; locations where `git` is installed, whether due to usernames in their paths or otherwise, contain characters that `git` quotes by default in paths, such as non-English letters and accented letters; a custom `system`-scope configuration file is specified with the `GIT_CONFIG_SYSTEM` environment variable, and its path is in an unusual location or has strangely named components; or a `system`-scope configuration file is absent, empty, or suppressed by means other than `GIT_CONFIG_NOSYSTEM`. Currently, `gix-path` can treat a `global`-scope configuration file as belonging to the installation if no higher scope configuration file is available. This increases the likelihood of exploitation even on a system where `git` is installed system-wide in an ordinary way. However, exploitation is expected to be very difficult even under any combination of those factors. | 2024-09-06 | 6 | CVE-2024-45405 | security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| checkmk -- checkmk | Improper neutralization of input in Checkmk before version 2.3.0p14 allows attackers to inject and run malicious scripts in the Robotmk logs view. | 2024-09-02 | 6.1 | CVE-2024-38858 | security@checkmk.com |
| Cisco--Cisco Duo Authentication for Epic | A vulnerability in Cisco Duo Epic for Hyperdrive could allow an authenticated, local attacker to view sensitive information in cleartext on an affected system. This vulnerability is due to improper storage of an unencrypted registry key. A low-privileged attacker could exploit this vulnerability by viewing or querying the registry key on the affected system. A successful exploit could allow the attacker to view sensitive information in cleartext. | 2024-09-04 | 5.5 | CVE-2024-20503 | ykramarz@cisco.com |
| Cisco--Cisco Identity Services Engine Software | A vulnerability in specific CLI commands in Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to perform command injection attacks on the underlying operating system and elevate privileges to root. To exploit this vulnerability, the attacker must have valid Administrator privileges on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted CLI command. A successful exploit could allow the attacker to elevate privileges to root. | 2024-09-04 | 6 | CVE-2024-20469 | ykramarz@cisco.com |
| Cisco--Cisco TelePresence Video Communication Server (VCS) Expressway | A vulnerability in Cisco Expressway Edge (Expressway-E) could allow an authenticated, remote attacker to masquerade as another user on an affected system. This vulnerability is due to inadequate authorization checks for Mobile and Remote Access (MRA) users. An attacker could exploit this vulnerability by running a series of crafted commands. A successful exploit could allow the attacker to intercept calls that are destined for a particular phone number or to make phone calls and have that phone number appear on the caller ID. To successfully exploit this vulnerability, the attacker must be an MRA user on an affected system. | 2024-09-04 | 4.3 | CVE-2024-20497 | ykramarz@cisco.com |
| Cisco--ClamAV | A vulnerability in the ClamD service module of Clam AntiVirus (ClamAV) versions 1.4.0, 1.3.2 and prior versions, all 1.2.x versions, 1.0.6 and prior versions, all 0.105.x versions, all 0.104.x versions, and 0.103.11 and all prior versions could allow an authenticated, local attacker to corrupt critical system files. The vulnerability is due to allowing the ClamD process to write to its log file while privileged without checking if the logfile has been replaced with a symbolic link. An attacker could exploit this vulnerability if they replace the ClamD log file with a symlink to a critical system file and then find a way to restart the ClamD process. An exploit could allow the attacker to corrupt a critical system file by appending ClamD log messages after restart. | 2024-09-04 | 6.1 | CVE-2024-20506 | ykramarz@cisco.com |
| Cisco--ClamAV | A vulnerability in the PDF parsing module of Clam AntiVirus (ClamAV) versions 1.4.0, 1.3.2 and prior versions, all 1.2.x versions, 1.0.6 and prior versions, all 0.105.x versions, all 0.104.x versions, and 0.103.11 and all prior versions could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to an out of bounds read. An attacker could exploit this vulnerability by submitting a crafted PDF file to be scanned by ClamAV on an affected device. An exploit could allow the attacker to terminate the scanning process. | 2024-09-04 | 4 | CVE-2024-20505 | ykramarz@cisco.com |
| CloudCannon--pagefind | Pagefind, a fully static search library, initializes its dynamic JavaScript and WebAssembly files relative to the location of the first script the user loads. This information is gathered by looking up the value of `document.currentScript.src`. Prior to Pagefind version 1.1.1, it is possible to "clobber" this lookup with otherwise benign HTML on the page. This will cause `document.currentScript.src` to resolve as an external domain, which will then be used by Pagefind to load dependencies. This exploit would only work in the case that an attacker could inject HTML to a live, hosted, website. In these cases, this would act as a way to escalate the privilege available to an attacker. This assumes they have the ability to add some elements to the page (for example, `img` tags with a `name` attribute), but not others, as adding a `script` to the page would itself be the cross-site scripting vector. Pagefind has tightened this resolution in version 1.1.1 by ensuring the source is loaded from a valid script element. There are no reports of this being exploited in the wild via Pagefind. | 2024-09-03 | 6.4 | CVE-2024-45389 | security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| code-projects--Online Shop Store | A vulnerability classified as problematic was found in code-projects Online Shop Store 1.0. This vulnerability affects unknown code of the file /settings.php. The manipulation of the argument error leads to cross site scripting. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | 2024-09-08 | 4.3 | CVE-2024-8566 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| coffee2code--Remember Me Controls | The Remember Me Controls plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 2.0.1. This is due to the plugin allowing direct access to the bootstrap.php file which has display_errors on. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website. | 2024-09-06 | 5.3 | CVE-2024-7415 | security@wordfence.com security@wordfence.com security@wordfence.com |
| Consensys--gnark | gnark is a fast zk-SNARK library that offers a high-level API to design circuits. Versions prior to 0.11.0 have a soundness issue - in case of multiple commitments used inside the circuit the prover is able to choose all but the last commitment. As gnark uses the commitments for optimized non-native multiplication, lookup checks etc. as random challenges, then it could impact the soundness of the whole circuit. However, using multiple commitments has been discouraged due to the additional cost to the verifier and it has not been supported in the recursive in-circuit Groth16 verifier and Solidity verifier. gnark's maintainers expect the impact of the issue be very small - only for the users who have implemented the native Groth16 verifier or are using it with multiple commitments. We do not have information of such users. The issue has been patched in version 0.11.0. As a workaround, users should follow gnark maintainers' recommendation to use only a single commitment and then derive in-circuit commitments as needed using the `std/multicommit` package. | 2024-09-06 | 6.2 | CVE-2024-45039 | security-advisories@github.com security-advisories@github.com |
| Consensys--gnark | gnark is a fast zk-SNARK library that offers a high-level API to design circuits. Prior to version 0.11.0, commitments to private witnesses in Groth16 as implemented break the zero-knowledge property. The vulnerability affects only Groth16 proofs with commitments. Notably, PLONK proofs are not affected. The vulnerability affects the zero-knowledge property of the proofs - in case the witness (secret or internal) values are small, then the attacker may be able to enumerate all possible choices to deduce the actual value. If the possible choices for the variables to be committed is large or there are many values committed, then it would be computationally infeasible to enumerate all valid choices. It doesn't affect the completeness/soundness of the proofs. The vulnerability has been fixed in version 0.11.0. The patch to fix the issue is to add additional randomized value to the list of committed value at proving time to mask the rest of the values which were committed. As a workaround, the user can manually commit to a randomized value. | 2024-09-06 | 5.9 | CVE-2024-45040 | security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| D-Link--DNS-320 | A vulnerability, which was classified as problematic, was found in D-Link DNS-320 2.02b01. This affects an unknown part of the file /cgi-bin/discovery.cgi of the component Web Management Interface. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced. | 2024-09-05 | 5.3 | CVE-2024-8461 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| dell -- path_to_powerprotect | Dell Path to PowerProtect, versions 1.1, 1.2, contains an Exposure of Private Personal Information to an Unauthorized Actor vulnerability. A remote high privileged attacker could potentially exploit this vulnerability, leading to information exposure. | 2024-09-03 | 4.9 | CVE-2024-37136 | security_alert@emc.com |
| dlink -- dns-320_firmware | A vulnerability, which was classified as problematic, has been found in D-Link DNS-320 2.02b01. Affected by this issue is some unknown functionality of the file /cgi-bin/widget_api.cgi of the component Web Management Interface. The manipulation of the argument getHD/getSer/getSys leads to information disclosure. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. Vendor was contacted early and confirmed that the product is end-of-life. It should be retired and replaced. | 2024-09-05 | 5.9 | CVE-2024-8460 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| ethyca -- fides | Fides is an open-source privacy engineering platform. Prior to version 2.44.0, a timing-based username enumeration vulnerability exists in Fides Webserver authentication. This vulnerability allows an unauthenticated attacker to determine the existence of valid usernames by analyzing the time it takes for the server to respond to login requests. The discrepancy in response times between valid and invalid usernames can be leveraged to enumerate users on the system. This vulnerability enables a timing-based username enumeration attack. An attacker can systematically guess and verify which usernames are valid by measuring the server's response time to authentication requests. This information can be used to conduct further attacks on authentication such as password brute-forcing and credential stuffing. The vulnerability has been patched in Fides version `2.44.0`. Users are advised to upgrade to this version or later to secure their systems against this threat. There are no workarounds. | 2024-09-04 | 5.3 | CVE-2024-45052 | security-advisories@github.com security-advisories@github.com |
| filipe-mateus-do-nascimento--RD Station | The RD Station plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 5.3.2 due to insufficient input sanitization and output escaping of post metaboxes added by the plugin. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-09-05 | 6.4 | CVE-2024-6894 | security@wordfence.com security@wordfence.com security@wordfence.com |
| google -- android | In vdec, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08932916; Issue ID: MSV-1551. | 2024-09-02 | 6.7 | CVE-2024-20086 | security@mediatek.com |
| google -- android | In vdec, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08932916; Issue ID: MSV-1550. | 2024-09-02 | 6.7 | CVE-2024-20087 | security@mediatek.com |
| google -- android | In keyinstall, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08932099; Issue ID: MSV-1543. | 2024-09-02 | 4.4 | CVE-2024-20088 | security@mediatek.com |
| halo-dev--halo | Halo is an open source website building tool. A security vulnerability has been identified in versions prior to 2.17.0 of the Halo project. This vulnerability allows an attacker to execute malicious scripts in the user's browser through specific HTML and JavaScript code, potentially leading to a Cross-Site Scripting (XSS) attack. Users are advised to upgrade to version 2.17.0+. There are no known workarounds for this vulnerability. | 2024-09-02 | 6.3 | CVE-2024-43792 | security-advisories@github.com |
| hashicorp -- vault | Vault Community Edition and Vault Enterprise experienced a regression where functionality that HMAC'd sensitive headers in the configured audit device, specifically client tokens and token accessors, was removed. This resulted in the plaintext values of client tokens and token accessors being stored in the audit log. This vulnerability, CVE-2024-8365, was fixed in Vault Community Edition and Vault Enterprise 1.17.5 and Vault Enterprise 1.16.9. | 2024-09-02 | 6.5 | CVE-2024-8365 | security@hashicorp.com |
| hedgedoc--hedgedoc | HedgeDoc is an open source, real-time, collaborative, markdown notes application. When using HedgeDoc 1 with MySQL or MariaDB, it is possible to create notes with an alias matching the ID of existing notes. The affected existing note can then not be accessed anymore and is effectively hidden by the new one. When the freeURL feature is enabled (by setting the `allowFreeURL` config option or the `CMD_ALLOW_FREEURL` environment variable to `true`), any user with the appropriate permissions can create a note with an arbitrary alias, e.g. by accessing it in the browser. When MySQL or MariaDB are used, it is possible to create a new note with an alias that matches the lower-cased ID of a different note. HedgeDoc then always presents the new note to users, as these databases perform case-insensitive matching and the lower-cased alias is found first. This issue only affects HedgeDoc instances that use MySQL or MariaDB. Depending on the permission settings of the HedgeDoc instance, the issue can be exploited only by logged-in users or by all (including non-logged-in) users. The exploit requires knowledge of the ID of the target note. Attackers could use this issue to present a manipulated copy of the original note to the user, e.g. by replacing the links with malicious ones. Attackers can also use this issue to prevent access to the original note, causing a denial of service. No data is lost, as the original content of the affected notes is still present in the database. Users are advised to upgrade to version 1.10.0 which addresses this issue. Users unable to upgrade may disable freeURL mode which prevents the exploitation of this issue. The impact can also be limited by restricting freeURL note creation to trusted, logged-in users by enabling `requireFreeURLAuthentication`/`CMD_REQUIRE_FREEURL_AUTHENTICATION`. | 2024-09-02 | 6.5 | CVE-2024-45308 | security-advisories@github.com security-advisories@github.com |
| helloasso--HelloAsso | The HelloAsso plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'ha_ajax' function in all versions up to, and including, 1.1.10. This makes it possible for authenticated attackers, with Contributor-level access and above, to update plugin options, potentially disrupting the service. | 2024-09-05 | 4.3 | CVE-2024-7605 | security@wordfence.com security@wordfence.com security@wordfence.com |
| huawei -- emui | Access permission verification vulnerability in the WMS module Impact: Successful exploitation of this vulnerability may affect service confidentiality. | 2024-09-04 | 5.5 | CVE-2024-45444 | psirt@huawei.com |
| huawei -- emui | Vulnerability of resources not being closed or released in the keystore module Impact: Successful exploitation of this vulnerability will affect availability. | 2024-09-04 | 5.5 | CVE-2024-45445 | psirt@huawei.com |
| huawei -- emui | Access permission verification vulnerability in the camera driver module Impact: Successful exploitation of this vulnerability will affect availability. | 2024-09-04 | 5.5 | CVE-2024-45446 | psirt@huawei.com |
| huawei -- emui | Access control vulnerability in the camera framework module Impact: Successful exploitation of this vulnerability may affect service confidentiality. | 2024-09-04 | 5.5 | CVE-2024-45447 | psirt@huawei.com |
| huawei -- emui | Page table protection configuration vulnerability in the trusted firmware module Impact: Successful exploitation of this vulnerability may affect service confidentiality. | 2024-09-04 | 5.5 | CVE-2024-45448 | psirt@huawei.com |
| huawei -- emui | Access permission verification vulnerability in the ringtone setting module Impact: Successful exploitation of this vulnerability may affect service confidentiality. | 2024-09-04 | 5.5 | CVE-2024-45449 | psirt@huawei.com |
| huawei -- emui | Memory request vulnerability in the memory management module Impact: Successful exploitation of this vulnerability may affect service confidentiality. | 2024-09-04 | 5.5 | CVE-2024-8298 | nvd@nist.gov psirt@huawei.com |
| Huawei--HarmonyOS | Vulnerability of permission verification for APIs in the DownloadProviderMain module Impact: Successful exploitation of this vulnerability will affect availability. | 2024-09-04 | 5.1 | CVE-2024-45442 | psirt@huawei.com |
| Huawei--HarmonyOS | Access control vulnerability in the SystemUI module Impact: Successful exploitation of this vulnerability may affect service confidentiality. | 2024-09-04 | 4.3 | CVE-2024-42039 | psirt@huawei.com |
| Huawei--HarmonyOS | Permission control vulnerability in the software update module. Impact: Successful exploitation of this vulnerability may affect service confidentiality. | 2024-09-04 | 4 | CVE-2024-45450 | psirt@huawei.com |
| huawei--HarmonyOS | Input verification vulnerability in the system service module Impact: Successful exploitation of this vulnerability will affect availability. | 2024-09-04 | 6.2 | CVE-2024-45441 | psirt@huawei.com |
| Hughes Network Systems--WL3000 Fusion Software | Credentials to access device configuration were transmitted using an unencrypted protocol. These credentials would allow read-only access to network configuration information and terminal configuration data. | 2024-09-05 | 6.5 | CVE-2024-42495 | ics-cert@hq.dhs.gov |
| Hughes Network Systems--WL3000 Fusion Software | Credentials to access device configuration information stored unencrypted in flash memory. These credentials would allow read-only access to network configuration information and terminal configuration data. | 2024-09-05 | 4.2 | CVE-2024-39278 | ics-cert@hq.dhs.gov |
| ibm -- aspera_faspex | IBM Aspera Faspex 5.0.0 through 5.0.9 could allow a user with access to the package to obtain sensitive information through a directory listing. | 2024-09-05 | 6.5 | CVE-2024-45096 | psirt@us.ibm.com |
| ibm -- webmethods_integration | IBM webMethods Integration 10.15 could allow an authenticated user to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system. | 2024-09-04 | 6.5 | CVE-2024-45074 | psirt@us.ibm.com |
| IBM--Maximo Application Suite | IBM Maximo Application Suite - Manage Component 8.10, 8.11, and 9.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. | 2024-09-07 | 5.9 | CVE-2024-37068 | psirt@us.ibm.com psirt@us.ibm.com |
| IBM--MQ Operator | IBM MQ Operator 2.0.26 and 3.2.4 could allow a local user to cause a denial of service due to improper memory allocation causing a segmentation fault. | 2024-09-07 | 5.5 | CVE-2024-40680 | psirt@us.ibm.com psirt@us.ibm.com |
| indico--indico | Indico is an event management system that uses Flask-Multipass, a multi-backend authentication system for Flask. In Indico prior to version 3.3.4, corresponding to Flask-Multipass prior to version 0.5.5, there is a Cross-Site-Scripting vulnerability during account creation when redirecting to the `next` URL. Exploitation requires initiating the account creation process with a maliciously crafted link, and then finalizing the signup process. Because of this, it can only target newly created (and thus unprivileged) Indico users. Indico 3.3.4 upgrades the dependency on Flask-Multipass to version 0.5.5, which fixes the issue. Those who build the Indico package themselves and cannot upgrade can update the `flask-multipass` dependency to `>=0.5.5` which fixes the vulnerability. Otherwise one could configure one's web server to disallow requests containing a query string with a `next` parameter that starts with `javascript:`. | 2024-09-04 | 4.3 | CVE-2024-45399 | security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| infinitumform -- geo_controller | The Geo Controller plugin for WordPress is vulnerable to unauthorized shortcode execution due to missing authorization and capability checks on the ajax__shortcode_cache function in all versions up to, and including, 8.6.9. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes available on the target site. | 2024-09-05 | 5.3 | CVE-2024-7381 | security@wordfence.com security@wordfence.com |
| infinitumform -- geo_controller | The Geo Controller plugin for WordPress is vulnerable to unauthorized menu creation/deletion due to missing capability checks on the ajax__geolocate_menu and ajax__geolocate_remove_menu functions in all versions up to, and including, 8.6.9. This makes it possible for authenticated attackers, with Subscriber-level access and above, to create or delete WordPress menus. | 2024-09-05 | 4.3 | CVE-2024-7380 | security@wordfence.com security@wordfence.com security@wordfence.com |
| itsourcecode--Tailoring Management System | A vulnerability was found in itsourcecode Tailoring Management System 1.0 and classified as critical. Affected by this issue is some unknown functionality of the file /inccatadd.php. The manipulation of the argument title leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. | 2024-09-08 | 6.3 | CVE-2024-8570 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| jellyfin--jellyfin | Jellyfin is an open source self hosted media server. The Jellyfin user profile image upload accepts SVG files, allowing for a stored XSS attack against an admin user via a specially crafted malicious SVG file. When viewed by an admin outside of the Jellyfin Web UI (e.g. via "view image" in a browser), this malicious SVG file could interact with the browser's LocalStorage and retrieve an AccessToken, which in turn can be used in an API call to elevate the target user to a Jellyfin administrator. The actual attack vector is unlikely to be exploited, as it requires specific actions by the administrator to view the SVG image outside of Jellyfin's WebUI, i.e. it is not a passive attack. The underlying exploit mechanism is solved by PR #12490, which forces attached images (including the potential malicious SVG) to be treated as attachments and thus downloaded by browsers, rather than viewed. This prevents exploitation of the LocalStorage of the browser. This PR has been merged and the relevant code changes are included in release version 10.9.10. All users are advised to upgrade. | 2024-09-02 | 4.6 | CVE-2024-43801 | security-advisories@github.com security-advisories@github.com |
| justinbusa--Customizer Export/Import | The Customizer Export/Import plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the '_import' function in all versions up to, and including, 0.9.7. This makes it possible for authenticated attackers, with Administrator-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. NOTE: This vulnerability is only exploitable when used in conjunction with a race condition as the uploaded file is deleted shortly after it is created. | 2024-09-07 | 6.6 | CVE-2024-7620 | security@wordfence.com security@wordfence.com |
| kanev--Cab fare calculator | The Cab fare calculator plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the vehicle title setting in versions up to, and including, 1.1.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers with administrative privileges to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. | 2024-09-05 | 4.4 | CVE-2022-3556 | security@wordfence.com security@wordfence.com |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: driver core: Fix uevent_show() vs driver detach race uevent_show() wants to de-reference dev->driver->name. There is no clean way for a device attribute to de-reference dev->driver unless that attribute is defined via (struct device_driver).dev_groups. Instead, the anti-pattern of taking the device_lock() in the attribute handler risks deadlocks with code paths that remove device attributes while holding the lock. This deadlock is typically invisible to lockdep given the device_lock() is marked lockdep_set_novalidate_class(), but some subsystems allocate a local lockdep key for @dev->mutex to reveal reports of the form: ====================================================== WARNING: possible circular locking dependency detected 6.10.0-rc7+ #275 Tainted: G OE N ------------------------------------------------------ modprobe/2374 is trying to acquire lock: ffff8c2270070de0 (kn->active#6){++++}-{0:0}, at: __kernfs_remove+0xde/0x220 but task is already holding lock: ffff8c22016e88f8 (&cxl_root_key){+.+.}-{3:3}, at: device_release_driver_internal+0x39/0x210 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&cxl_root_key){+.+.}-{3:3}: __mutex_lock+0x99/0xc30 uevent_show+0xac/0x130 dev_attr_show+0x18/0x40 sysfs_kf_seq_show+0xac/0xf0 seq_read_iter+0x110/0x450 vfs_read+0x25b/0x340 ksys_read+0x67/0xf0 do_syscall_64+0x75/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (kn->active#6){++++}-{0:0}: __lock_acquire+0x121a/0x1fa0 lock_acquire+0xd6/0x2e0 kernfs_drain+0x1e9/0x200 __kernfs_remove+0xde/0x220 kernfs_remove_by_name_ns+0x5e/0xa0 device_del+0x168/0x410 device_unregister+0x13/0x60 devres_release_all+0xb8/0x110 device_unbind_cleanup+0xe/0x70 device_release_driver_internal+0x1c7/0x210 driver_detach+0x47/0x90 bus_remove_driver+0x6c/0xf0 cxl_acpi_exit+0xc/0x11 [cxl_acpi] __do_sys_delete_module.isra.0+0x181/0x260 do_syscall_64+0x75/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e The observation though is that driver objects are typically much longer lived than device objects. It is reasonable to perform lockless de-reference of a @driver pointer even if it is racing detach from a device. Given the infrequency of driver unregistration, use synchronize_rcu() in module_remove_driver() to close any potential races. It is potentially overkill to suffer synchronize_rcu() just to handle the rare module removal racing uevent_show() event. Thanks to Tetsuo Handa for the debug analysis of the syzbot report [1]. | 2024-09-04 | 5.5 | CVE-2024-44952 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix deadlock during RTC update There is a deadlock when runtime suspend waits for the flush of RTC work, and the RTC work calls ufshcd_rpm_get_sync() to wait for runtime resume. Here is deadlock backtrace: kworker/0:1 D 4892.876354 10 10971 4859 0x4208060 0x8 10 0 120 670730152367 ptr f0ffff80c2e40000 0 1 0x00000001 0x000000ff 0x000000ff 0x000000ff <ffffffee5e71ddb0> __switch_to+0x1a8/0x2d4 <ffffffee5e71e604> __schedule+0x684/0xa98 <ffffffee5e71ea60> schedule+0x48/0xc8 <ffffffee5e725f78> schedule_timeout+0x48/0x170 <ffffffee5e71fb74> do_wait_for_common+0x108/0x1b0 <ffffffee5e71efe0> wait_for_completion+0x44/0x60 <ffffffee5d6de968> __flush_work+0x39c/0x424 <ffffffee5d6decc0> __cancel_work_sync+0xd8/0x208 <ffffffee5d6dee2c> cancel_delayed_work_sync+0x14/0x28 <ffffffee5e2551b8> __ufshcd_wl_suspend+0x19c/0x480 <ffffffee5e255fb8> ufshcd_wl_runtime_suspend+0x3c/0x1d4 <ffffffee5dffd80c> scsi_runtime_suspend+0x78/0xc8 <ffffffee5df93580> __rpm_callback+0x94/0x3e0 <ffffffee5df90b0c> rpm_suspend+0x2d4/0x65c <ffffffee5df91448> __pm_runtime_suspend+0x80/0x114 <ffffffee5dffd95c> scsi_runtime_idle+0x38/0x6c <ffffffee5df912f4> rpm_idle+0x264/0x338 <ffffffee5df90f14> __pm_runtime_idle+0x80/0x110 <ffffffee5e24ce44> ufshcd_rtc_work+0x128/0x1e4 <ffffffee5d6e3a40> process_one_work+0x26c/0x650 <ffffffee5d6e65c8> worker_thread+0x260/0x3d8 <ffffffee5d6edec8> kthread+0x110/0x134 <ffffffee5d616b18> ret_from_fork+0x10/0x20 Skip updating RTC if RPM state is not RPM_ACTIVE. | 2024-09-04 | 5.5 | CVE-2024-44953 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: drm/xe/preempt_fence: enlarge the fence critical section It is really easy to introduce subtle deadlocks in preempt_fence_work_func() since we operate on single global ordered-wq for signalling our preempt fences behind the scenes, so even though we signal a particular fence, everything in the callback should be in the fence critical section, since blocking in the callback will prevent other published fences from signalling. If we enlarge the fence critical section to cover the entire callback, then lockdep should be able to understand this better, and complain if we grab a sensitive lock like vm->lock, which is also held when waiting on preempt fences. | 2024-09-04 | 5.5 | CVE-2024-44956 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: xen: privcmd: Switch from mutex to spinlock for irqfds irqfd_wakeup() gets EPOLLHUP, when it is called by eventfd_release() by way of wake_up_poll(&ctx->wqh, EPOLLHUP), which gets called under spin_lock_irqsave(). We can't use a mutex here as it will lead to a deadlock. Fix it by switching over to a spin lock. | 2024-09-04 | 5.5 | CVE-2024-44957 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register() bcm_sf2_mdio_register() calls of_phy_find_device() and then phy_device_remove() in a loop to remove existing PHY devices. of_phy_find_device() eventually calls bus_find_device(), which calls get_device() on the returned struct device * to increment the refcount. The current implementation does not decrement the refcount, which causes memory leak. This commit adds the missing phy_device_free() call to decrement the refcount via put_device() to balance the refcount. | 2024-09-04 | 5.5 | CVE-2024-44971 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask() UBSAN reports the following 'subtraction overflow' error when booting in a virtual machine on Android: | Internal error: UBSAN: integer subtraction overflow: 00000000f2005515 [#1] PREEMPT SMP | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.10.0-00006-g3cbe9e5abd46-dirty #4 | Hardware name: linux,dummy-virt (DT) | pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : cancel_delayed_work+0x34/0x44 | lr : cancel_delayed_work+0x2c/0x44 | sp : ffff80008002ba60 | x29: ffff80008002ba60 x28: 0000000000000000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 0000000000000000 x22: 0000000000000000 x21: ffff1f65014cd3c0 | x20: ffffc0e84c9d0da0 x19: ffffc0e84cab3558 x18: ffff800080009058 | x17: 00000000247ee1f8 x16: 00000000247ee1f8 x15: 00000000bdcb279d | x14: 0000000000000001 x13: 0000000000000075 x12: 00000a0000000000 | x11: ffff1f6501499018 x10: 00984901651fffff x9 : ffff5e7cc35af000 | x8 : 0000000000000001 x7 : 3d4d455453595342 x6 : 000000004e514553 | x5 : ffff1f6501499265 x4 : ffff1f650ff60b10 x3 : 0000000000000620 | x2 : ffff80008002ba78 x1 : 0000000000000000 x0 : 0000000000000000 | Call trace: | cancel_delayed_work+0x34/0x44 | deferred_probe_extend_timeout+0x20/0x70 | driver_register+0xa8/0x110 | __platform_driver_register+0x28/0x3c | syscon_init+0x24/0x38 | do_one_initcall+0xe4/0x338 | do_initcall_level+0xac/0x178 | do_initcalls+0x5c/0xa0 | do_basic_setup+0x20/0x30 | kernel_init_freeable+0x8c/0xf8 | kernel_init+0x28/0x1b4 | ret_from_fork+0x10/0x20 | Code: f9000fbf 97fffa2f 39400268 37100048 (d42aa2a0) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: UBSAN: integer subtraction overflow: Fatal exception This is due to shift_and_mask() using a signed immediate to construct the mask and being called with a shift of 31 (WORK_OFFQ_POOL_SHIFT) so that it ends up decrementing from INT_MIN. Use an unsigned constant '1U' to generate the mask in shift_and_mask(). | 2024-09-04 | 5.5 | CVE-2024-44981 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bonding: fix xfrm real_dev null pointer dereference We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80 | 2024-09-04 | 5.5 | CVE-2024-44989 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: bonding: fix null pointer deref in bond_ipsec_offload_ok We must check if there is an active slave before dereferencing the pointer. | 2024-09-04 | 5.5 | CVE-2024-44990 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: smb/client: avoid possible NULL dereference in cifs_free_subrequest() Clang static checker (scan-build) warning: cifsglob.h:line 890, column 3 Access to field 'ops' results in a dereference of a null pointer. Commit 519be989717c ("cifs: Add a tracepoint to track credits involved in R/W requests") adds a check for 'rdata->server', and let clang throw this warning about NULL dereference. When 'rdata->credits.value != 0 && rdata->server == NULL' happens, add_credits_and_wake_if() will call rdata->server->ops->add_credits(). This will cause NULL dereference problem. Add a check for 'rdata->server' to avoid NULL dereference. | 2024-09-04 | 5.5 | CVE-2024-44992 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix a deadlock problem when config TC during resetting When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start ? ? ...... setup tc ? ? ? ? DOWN: napi_disable() napi_disable()(skip) ? ? ? ? ? ...... ...... ? ? ? ? napi_enable() ? ? UINIT: netif_napi_del() ? ? ...... ? ? INIT: netif_napi_add() ? ? ...... global reset start ? ? ? ? UP: napi_enable()(skip) ...... ? ? ? ? ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it. | 2024-09-04 | 5.5 | CVE-2024-44995 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: fs/netfs/fscache_cookie: add missing "n_accesses" check This fixes a NULL pointer dereference bug due to a data race which looks like this: BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 33 PID: 16573 Comm: kworker/u97:799 Not tainted 6.8.7-cm4all1-hp+ #43 Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 10/17/2018 Workqueue: events_unbound netfs_rreq_write_to_cache_work RIP: 0010:cachefiles_prepare_write+0x30/0xa0 Code: 57 41 56 45 89 ce 41 55 49 89 cd 41 54 49 89 d4 55 53 48 89 fb 48 83 ec 08 48 8b 47 08 48 83 7f 10 00 48 89 34 24 48 8b 68 20 <48> 8b 45 08 4c 8b 38 74 45 49 8b 7f 50 e8 4e a9 b0 ff 48 8b 73 10 RSP: 0018:ffffb4e78113bde0 EFLAGS: 00010286 RAX: ffff976126be6d10 RBX: ffff97615cdb8438 RCX: 0000000000020000 RDX: ffff97605e6c4c68 RSI: ffff97605e6c4c60 RDI: ffff97615cdb8438 RBP: 0000000000000000 R08: 0000000000278333 R09: 0000000000000001 R10: ffff97605e6c4600 R11: 0000000000000001 R12: ffff97605e6c4c68 R13: 0000000000020000 R14: 0000000000000001 R15: ffff976064fe2c00 FS: 0000000000000000(0000) GS:ffff9776dfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000005942c002 CR4: 00000000001706f0 Call Trace: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x15d/0x440 ? search_module_extables+0xe/0x40 ? fixup_exception+0x22/0x2f0 ? exc_page_fault+0x5f/0x100 ? asm_exc_page_fault+0x22/0x30 ? cachefiles_prepare_write+0x30/0xa0 netfs_rreq_write_to_cache_work+0x135/0x2e0 process_one_work+0x137/0x2c0 worker_thread+0x2e9/0x400 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Modules linked in: CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- This happened because fscache_cookie_state_machine() was slow and was still running while another process invoked fscache_unuse_cookie(); this led to a fscache_cookie_lru_do_one() call, setting the FSCACHE_COOKIE_DO_LRU_DISCARD flag, which was picked up by fscache_cookie_state_machine(), withdrawing the cookie via cachefiles_withdraw_cookie(), clearing cookie->cache_priv. At the same time, yet another process invoked cachefiles_prepare_write(), which found a NULL pointer in this code line: struct cachefiles_object *object = cachefiles_cres_object(cres); The next line crashes, obviously: struct cachefiles_cache *cache = object->volume->cache; During cachefiles_prepare_write(), the "n_accesses" counter is non-zero (via fscache_begin_operation()). The cookie must not be withdrawn until it drops to zero. The counter is checked by fscache_cookie_state_machine() before switching to FSCACHE_COOKIE_STATE_RELINQUISHING and FSCACHE_COOKIE_STATE_WITHDRAWING (in "case FSCACHE_COOKIE_STATE_FAILED"), but not for FSCACHE_COOKIE_STATE_LRU_DISCARDING ("case FSCACHE_COOKIE_STATE_ACTIVE"). This patch adds the missing check. With a non-zero access counter, the function returns and the next fscache_end_cookie_access() call will queue another fscache_cookie_state_machine() call to handle the still-pending FSCACHE_COOKIE_DO_LRU_DISCARD. | 2024-09-04 | 5.5 | CVE-2024-45000 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: rtla/osnoise: Prevent NULL dereference in error handling If the "tool->data" allocation fails then there is no need to call osnoise_free_top() and, in fact, doing so will lead to a NULL dereference. | 2024-09-04 | 5.5 | CVE-2024-45002 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linux -- linux_kernel | In the Linux kernel, the following vulnerability has been resolved: xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated. | 2024-09-04 | 5.5 | CVE-2024-45006 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| linuxfoundation -- yocto | In power, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08944210; Issue ID: MSV-1561. | 2024-09-02 | 4.4 | CVE-2024-20084 | security@mediatek.com |
| linuxfoundation -- yocto | In power, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS08944204; Issue ID: MSV-1560. | 2024-09-02 | 4.4 | CVE-2024-20085 | security@mediatek.com |
| LinuxOSsk--Shakal-NG | A vulnerability, which was classified as problematic, was found in LinuxOSsk Shakal-NG up to 1.3.3. Affected is an unknown function of the file comments/views.py. The manipulation of the argument next leads to open redirect. It is possible to launch the attack remotely. The name of the patch is ebd1c2cba59cbac198bf2fd5a10565994d4f02cb. It is recommended to apply a patch to fix this issue. | 2024-09-04 | 4.3 | CVE-2024-8412 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Loway--QueueMetrics | Loway - CWE-601: URL Redirection to Untrusted Site ('Open Redirect') | 2024-09-08 | 6.1 | CVE-2024-42341 | cna@cyber.gov.il |
| Loway--QueueMetrics | Loway - CWE-204: Observable Response Discrepancy | 2024-09-08 | 5.3 | CVE-2024-42343 | cna@cyber.gov.il |
| Loway--QueueMetrics | Loway - CWE-444: Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling') | 2024-09-08 | 4.3 | CVE-2024-42342 | cna@cyber.gov.il |
| majeedraza -- carousel_slider | WordPress plugin "Carousel Slider" provided by Sayful Islam contains a cross-site request forgery vulnerability on Carousel image selection feature. While logged in to the WordPress site with Carousel Slider plugin enabled, accessing a crafted page may cause a user to alter the contents of the WordPress site. | 2024-09-02 | 4.3 | CVE-2024-45269 | vultures@jpcert.or.jp vultures@jpcert.or.jp vultures@jpcert.or.jp |
| majeedraza -- carousel_slider | WordPress plugin "Carousel Slider" provided by Sayful Islam contains a cross-site request forgery vulnerability on Hero image selection feature. While logged in to the WordPress site with Carousel Slider plugin enabled, accessing a crafted page may cause a user to alter the contents of the WordPress site. | 2024-09-02 | 4.3 | CVE-2024-45270 | vultures@jpcert.or.jp vultures@jpcert.or.jp vultures@jpcert.or.jp |
| maxsdesign--Preloader Plus WordPress Loading Screen Plugin | The Preloader Plus - WordPress Loading Screen Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via SVG File uploads in all versions up to, and including, 2.2.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the SVG file. | 2024-09-07 | 6.4 | CVE-2024-6849 | security@wordfence.com security@wordfence.com security@wordfence.com |
| metal3-io--baremetal-operator | The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. The `BareMetalHost` (BMH) CRD allows the `userData`, `metaData`, and `networkData` for the provisioned host to be specified as links to Kubernetes Secrets. There are fields for both the `Name` and `Namespace` of the Secret, meaning that versions of the baremetal-operator prior to 0.8.0, 0.6.2, and 0.5.2 will read a `Secret` from any namespace. A user with access to create or edit a `BareMetalHost` can thus exfiltrate a `Secret` from another namespace by using it as e.g. the `userData` for provisioning some host (note that this need not be a real host, it could be a VM somewhere). BMO will only read a key with the name `value` (or `userData`, `metaData`, or `networkData`), so that limits the exposure somewhat. `value` is probably a pretty common key though. Secrets used by _other_ `BareMetalHost`s in different namespaces are always vulnerable. It is probably relatively unusual for anyone other than cluster administrators to have RBAC access to create/edit a `BareMetalHost`. This vulnerability is only meaningful, if the cluster has users other than administrators and users' privileges are limited to their respective namespaces. The patch prevents BMO from accepting links to Secrets from other namespaces as BMH input. Any BMH configuration is only read from the same namespace only. The problem is patched in BMO releases v0.7.0, v0.6.2 and v0.5.2 and users should upgrade to those versions. Prior upgrading, duplicate the BMC Secrets to the namespace where the corresponding BMH is. After upgrade, remove the old Secrets. As a workaround, an operator can configure BMO RBAC to be namespace scoped for Secrets, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces. | 2024-09-03 | 4.9 | CVE-2024-43803 | security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| mihail-barinov--Share This Image | The Share This Image plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's STI Buttons shortcode in all versions up to, and including, 2.02 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-09-05 | 6.4 | CVE-2024-8363 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| mlewand--ckeditor-plugin-openlink | ckeditor-plugin-openlink is a plugin for the CKEditor JavaScript text editor that extends the context menu with a possibility to open a link in a new tab. A vulnerability in versions of the plugin prior to 1.0.7 allowed a user to execute JavaScript code by abusing the link href attribute. The fix is available starting with version 1.0.7. | 2024-09-06 | 6.1 | CVE-2024-45400 | security-advisories@github.com security-advisories@github.com |
| mozilla -- firefox | If a site had been granted the permission to open popup windows, it could cause Select elements to appear on top of another site to perform a spoofing attack. This vulnerability affects Firefox < 130, Firefox ESR < 128.2, and Thunderbird < 128.2. | 2024-09-03 | 6.1 | CVE-2024-8386 | security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org security@mozilla.org |
| mozilla -- firefox | Multiple prompts and panels from both Firefox and the Android OS could be used to obscure the notification announcing the transition to fullscreen mode after the fix for CVE-2023-6870 in Firefox 121. This could lead to spoofing the browser UI if the sudden appearance of the prompt distracted the user from noticing the visual transition happening behind the prompt. These notifications now use the Android Toast feature. *This bug only affects Firefox on Android. Other operating systems are unaffected.* This vulnerability affects Firefox < 130. | 2024-09-03 | 5.3 | CVE-2024-8388 | security@mozilla.org security@mozilla.org security@mozilla.org |
| msoftplugins--Security, Antivirus, Firewall S.A.F | The Security, Antivirus, Firewall - S.A.F plugin for WordPress is vulnerable to IP Address Spoofing in versions up to, and including, 2.3.5. This is due to insufficient restrictions on where the IP Address information is being retrieved for request logging and login restrictions. Attackers can supply the X-Forwarded-For header with with a different IP Address that will be logged and can be used to bypass settings that may have blocked out an IP address from logging in. | 2024-09-05 | 5.3 | CVE-2022-4529 | security@wordfence.com security@wordfence.com |
| munyweki -- insurance_management_system | A vulnerability has been found in SourceCodester Insurance Management System 1.0 and classified as problematic. Affected by this vulnerability is an unknown functionality. The manipulation leads to cross-site request forgery. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | 2024-09-04 | 4.3 | CVE-2024-8414 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| n/a--lmxcms | A vulnerability was found in lmxcms up to 1.4 and classified as critical. Affected by this issue is the function formatData of the file /admin.php?m=Acquisi&a=testcj&lid=1 of the component SQL Command Execution Module. The manipulation of the argument data leads to code injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-07 | 4.7 | CVE-2024-8523 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| n/a--Mini-Tmall | A vulnerability, which was classified as critical, was found in Mini-Tmall up to 20240901. Affected is the function rewardMapper.select of the file tmall/admin/order/1/1. The manipulation of the argument orderBy leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-08 | 6.3 | CVE-2024-8568 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| n/a--n/a | An issue was discovered in za-internet C-MOR Video Surveillance 5.2401 and 6.00PL01. Due to missing protection mechanisms, the C-MOR web interface is vulnerable to cross-site request forgery (CSRF) attacks. The C-MOR web interface offers no protection against cross-site request forgery (CSRF) attacks. | 2024-09-04 | 6.8 | CVE-2024-45172 | cve@mitre.org cve@mitre.org |
| n/a--n/a | REDCap 14.7.0 allows HTML injection via the project title of a New Project action. This can lead to resultant logout CSRF via index.php?logout=1, and can also be used to insert a link to an external phishing website. | 2024-09-02 | 6.1 | CVE-2024-45527 | cve@mitre.org cve@mitre.org |
| n/a--n/a | RapidIdentity LTS through 2023.0.2 and Cloud through 2024.08.0 improperly restricts excessive authentication attempts and allows a remote attacker to cause a denial of service via the username parameters. | 2024-09-05 | 6.5 | CVE-2024-45589 | cve@mitre.org cve@mitre.org |
| n/a--n/a | BPL Personal Weighing Scale PWS-01BT IND/09/18/599 devices send sensitive information in unencrypted BLE packets. (The packet data also lacks authentication and integrity protection.) | 2024-09-03 | 5.1 | CVE-2024-34463 | cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | Cross Site Scripting vulnerability in ZZCMS v.2023 and before allows a remote attacker to obtain sensitive information via the HTTP_Referer header of the caina.php component. | 2024-09-04 | 5.4 | CVE-2024-44818 | cve@mitre.org |
| n/a--n/a | ZZCMS 2023 contains a vulnerability in the captcha reuse logic located in /inc/function.php. The checkyzm function does not properly refresh the captcha value after a failed validation attempt. As a result, an attacker can exploit this flaw by repeatedly submitting the same incorrect captcha response, allowing them to capture the correct captcha value through error messages. | 2024-09-04 | 5.3 | CVE-2024-44821 | cve@mitre.org |
| n/a--n/a | A cross-site scripting (XSS) vulnerability in the component \bean\Manager.java of Drug v1.0 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the user parameter. | 2024-09-06 | 5.4 | CVE-2024-44837 | cve@mitre.org |
| n/a--n/a | An issue was discovered in za-internet C-MOR Video Surveillance 5.2401 and 6.00PL01. Due to improper input validation, the C-MOR web interface is vulnerable to persistent cross-site scripting (XSS) attacks. It was found out that the camera configuration is vulnerable to a persistent cross-site scripting attack due to insufficient user input validation. | 2024-09-04 | 5.4 | CVE-2024-45177 | cve@mitre.org cve@mitre.org |
| n/a--n/a | CodeAstro MembershipM-PHP (aka Membership Management System in PHP) 1.0 allows add_members.php fullname stored XSS. | 2024-09-02 | 5.4 | CVE-2024-45528 | cve@mitre.org |
| n/a--n/a | PingCAP TiDB v8.1.0 was discovered to contain a buffer overflow via the component (*Column).GetDecimal. This allows attackers to cause a Denial of Service (DoS) via a crafted input to the 'RemoveUnnecessaryFirstRow', it will check the expression between 'Agg' and 'GroupBy', but does not check the return type. | 2024-09-03 | 4.3 | CVE-2024-41434 | cve@mitre.org cve@mitre.org |
| n/a--n/a | A CSV injection vulnerability in Lime Survey v6.5.12 allows attackers to execute arbitrary code via uploading a crafted CSV file. | 2024-09-03 | 4.8 | CVE-2024-42901 | cve@mitre.org cve@mitre.org |
| n/a--Wavelog | A vulnerability, which was classified as problematic, was found in Wavelog up to 1.8.0. Affected is the function index of the file /qso of the component Live QSO. The manipulation of the argument manual leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.8.1 is able to address this issue. The patch is identified as b31002cec6b71ab5f738881806bb546430ec692e. It is recommended to upgrade the affected component. | 2024-09-07 | 4.3 | CVE-2024-8521 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Open-Xchange GmbH--OX Dovecot Pro | Dovecot accepts dot LF DOT LF symbol as end of DATA command. RFC requires that it should always be CR LF DOT CR LF. This causes Dovecot to convert single mail with LF DOT LF in middle, into two emails when relaying to SMTP. Dovecot will split mail with LF DOT LF into two mails. Upgrade to latest released version. No publicly available exploits are known. | 2024-09-06 | 5.3 | CVE-2024-25584 | security@open-xchange.com |
| openatom -- openharmony | in OpenHarmony v4.1.0 and prior versions allow a local attacker cause crash through integer overflow. | 2024-09-02 | 5.5 | CVE-2024-28044 | scy@openharmony.io |
| openatom -- openharmony | in OpenHarmony v4.0.0 and prior versions allow a local attacker cause information leak through out-of-bounds Read. | 2024-09-02 | 5.5 | CVE-2024-38382 | scy@openharmony.io |
| openatom -- openharmony | in OpenHarmony v4.0.0 and prior versions allow a local attacker cause information leak through out-of-bounds Read. | 2024-09-02 | 5.5 | CVE-2024-39612 | scy@openharmony.io |
| overleaf--overleaf | Overleaf is a web-based collaborative LaTeX editor. Overleaf Community Edition and Server Pro prior to version 5.0.7 (or 4.2.7 for the 4.x series) contain a vulnerability that allows an arbitrary language parameter in client spelling requests to be passed to the `aspell` executable running on the server. This causes `aspell` to attempt to load a dictionary file with an arbitrary filename. File access is limited to the scope of the overleaf server. The problem is patched in versions 5.0.7 and 4.2.7. Previous versions can be upgraded using the Overleaf toolkit `bin/upgrade` command. Users unable to upgrade may block POST requests to `/spelling/check` via a Web Application Firewall will prevent access to the vulnerable spell check feature. However, upgrading is advised. | 2024-09-02 | 5.3 | CVE-2024-45312 | security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| overleaf--overleaf | Overleaf is a web-based collaborative LaTeX editor. When installing Server Pro using the Overleaf Toolkit from before 2024-07-17 or legacy docker-compose.yml from before 2024-08-28, the configuration for LaTeX compiles was insecure by default, requiring the administrator to enable the security features via a configuration setting (`SIBLING_CONTAINERS_ENABLED` in Toolkit, `SANDBOXED_COMPILES` in legacy docker-compose/custom deployments). If these security features are not enabled then users have access to the `sharelatex` container resources (filesystem, network, environment variables) when running compiles, leading to multiple file access vulnerabilities, either directly or via symlinks created during compiles. The setting has now been changed to be secure by default for new installs in the Toolkit and legacy docker-compose deployment. The Overleaf Toolkit has been updated to set `SIBLING_CONTAINERS_ENABLED=true` by default for new installs. It is recommended that any existing installations using the previous default setting migrate to using sibling containers. Existing installations can set `SIBLING_CONTAINERS_ENABLED=true` in `config/overleaf.rc` as a mitigation. In legacy docker-compose/custom deployments `SANDBOXED_COMPILES=true` should be used. | 2024-09-02 | 5.4 | CVE-2024-45313 | security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| phpgurukul -- job_portal | Cross-Site Scripting (XSS) vulnerability, whereby user-controlled input is not sufficiently encrypted. Exploitation of this vulnerability could allow an attacker to retrieve the session details of an authenticated user through JOBID and USERNAME parameters in /jobportal/process.php. | 2024-09-05 | 6.1 | CVE-2024-8471 | cve-coordination@incibe.es |
| phpgurukul -- job_portal | Cross-Site Scripting (XSS) vulnerability, whereby user-controlled input is not sufficiently encrypted. Exploitation of this vulnerability could allow an attacker to retrieve the session details of an authenticated user through multiple parameters in /jobportal/index.php. | 2024-09-05 | 6.1 | CVE-2024-8472 | cve-coordination@incibe.es |
| phpgurukul -- job_portal | Cross-Site Scripting (XSS) vulnerability, whereby user-controlled input is not sufficiently encrypted. Exploitation of this vulnerability could allow an attacker to retrieve the session details of an authenticated user through user_email parameter in /jobportal/admin/login.php. | 2024-09-05 | 6.1 | CVE-2024-8473 | cve-coordination@incibe.es |
| pixelyoursite--PixelYourSite Pro Your smart PIXEL (TAG) Manager | The PixelYourSite - Your smart PIXEL (TAG) & API Manager and the PixelYourSite PRO plugins for WordPress are vulnerable to Sensitive Information Exposure in all versions up to, and including, 9.7.1 and 10.4.2, respectively, through publicly exposed log files. This makes it possible for unauthenticated attackers to view potentially sensitive information contained in the exposed log files, and to delete log files. | 2024-09-04 | 6.5 | CVE-2024-7870 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| progress -- openedge | An ActiveMQ Discovery service was reachable by default from an OpenEdge Management installation when an OEE/OEM auto-discovery feature was activated. Unauthorized access to the discovery service's UDP port allowed content injection into parts of the OEM web interface making it possible for other types of attack that could spoof or deceive web interface users.  Unauthorized use of the OEE/OEM discovery service was remediated by deactivating the discovery service by default. | 2024-09-03 | 6.1 | CVE-2024-7654 | security@progress.com |
| progress -- openedge | Host name validation for TLS certificates is bypassed when the installed OpenEdge default certificates are used to perform the TLS handshake for a networked connection. This has been corrected so that default certificates are no longer capable of overriding host name validation and will need to be replaced where full TLS certificate validation is needed for network security. The existing certificates should be replaced with CA-signed certificates from a recognized certificate authority that contain the necessary information to support host name validation. | 2024-09-03 | 4.8 | CVE-2024-7346 | security@progress.com |
| QNAP Systems Inc.--Music Station | An improper authentication vulnerability has been reported to affect Music Station. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following version: Music Station 5.4.0 and later | 2024-09-06 | 4.3 | CVE-2023-45038 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--Notes Station 3 | A cross-site scripting (XSS) vulnerability has been reported to affect Notes Station 3. If exploited, the vulnerability could allow authenticated users to inject malicious code via a network. We have already fixed the vulnerability in the following versions: Notes Station 3 3.9.6 and later | 2024-09-06 | 6.3 | CVE-2024-27122 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--Notes Station 3 | A cross-site scripting (XSS) vulnerability has been reported to affect Notes Station 3. If exploited, the vulnerability could allow authenticated users to inject malicious code via a network. We have already fixed the vulnerability in the following versions: Notes Station 3 3.9.6 and later | 2024-09-06 | 6.3 | CVE-2024-27126 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 4.5.4.2790 build 20240605 and later QuTS hero h4.5.4.2790 build 20240606 and later | 2024-09-06 | 6.6 | CVE-2023-34979 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later | 2024-09-06 | 6.6 | CVE-2024-21903 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later | 2024-09-06 | 5.4 | CVE-2023-51367 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to launch a denial-of-service (DoS) attack via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later | 2024-09-06 | 5.4 | CVE-2023-51368 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A path traversal vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to read the contents of unexpected files and expose sensitive data via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.7.2770 build 20240520 and later QuTS hero h5.1.7.2770 build 20240520 and later | 2024-09-06 | 5.9 | CVE-2024-21904 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A cross-site scripting (XSS) vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to inject malicious code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later | 2024-09-06 | 4.3 | CVE-2023-50366 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.8.2823 build 20240712 and later QuTS hero h5.1.8.2823 build 20240712 and later | 2024-09-06 | 4.7 | CVE-2024-21906 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QVR Smart Client | An unquoted search path or element vulnerability has been reported to affect QVR Smart Client. If exploited, the vulnerability could allow local authenticated administrators to execute unauthorized code or commands via unspecified vectors. We have already fixed the vulnerability in the following version: Windows 10 SP1, Windows 11, Mac OS, and Mac M1: QVR Smart Client 2.4.0.0570 and later | 2024-09-06 | 6.7 | CVE-2022-27592 | security@qnapsecurity.com.tw |
| Qualcomm, Inc.--Snapdragon | memory corruption when an invalid firehose patch command is invoked. | 2024-09-02 | 6.8 | CVE-2024-33016 | product-security@qualcomm.com |
| Qualcomm, Inc.--Snapdragon | Transient DOS while handling PS event when Program Service name length offset value is set to 255. | 2024-09-02 | 5.5 | CVE-2024-33043 | product-security@qualcomm.com |
| raspcontrol_project -- raspcontrol | Cross Site Scripting (XSS) vulnerability through the action parameter in index.php. Affected product codebase https://github.com/Bioshox/Raspcontrol and forks such as https://github.com/harmon25/raspcontrol . An attacker could exploit this vulnerability by sending a specially crafted JavaScript payload to an authenticated user and partially hijacking their session details. References list | 2024-09-04 | 6.1 | CVE-2024-8413 | cve-coordination@incibe.es |
| Red Hat--Red Hat Build of Keycloak | A vulnerability was found in Keycloak. This flaw allows attackers to bypass brute force protection by exploiting the timing of login attempts. By initiating multiple login requests simultaneously, attackers can exceed the configured limits for failed attempts before the system locks them out. This timing loophole enables attackers to make more guesses at passwords than intended, potentially compromising account security on affected systems. | 2024-09-03 | 6.5 | CVE-2024-4629 | secalert@redhat.com secalert@redhat.com |
| Red Hat--Red Hat Directory Server 11 | The fix for CVE-2024-2199 in 389-ds-base was insufficient to cover all scenarios. In certain product versions, an authenticated user may cause a server crash while modifying `userPassword` using malformed input. | 2024-09-05 | 5.7 | CVE-2024-8445 | secalert@redhat.com secalert@redhat.com |
| salesagility -- suitecrm | SuiteCRM is an open-source customer relationship management (CRM) system. Prior to version 7.14.5 and 8.6.2, insufficient access control checks allow a threat actor to delete records via the API. Versions 7.14.5 and 8.6.2 contain a patch for the issue. | 2024-09-05 | 4.3 | CVE-2024-45392 | security-advisories@github.com security-advisories@github.com |
| samsung -- android | Improper access control in WindowManagerService prior to SMR Sep-2024 Release 1 in Android 12, and SMR Jun-2024 Release 1 in Android 13 and Android 14 allows local attackers to bypass restrictions on starting services from the background. | 2024-09-04 | 5.5 | CVE-2024-34637 | mobile.security@samsung.com |
| samsung -- android | Improper access control in key input related function in Dressroom prior to SMR Sep-2024 Release 1 allows local attackers to access protected data. User interaction is required for triggering this vulnerability. | 2024-09-04 | 5.5 | CVE-2024-34643 | mobile.security@samsung.com |
| samsung -- android | Improper access control in item selection related in Dressroom prior to SMR Sep-2024 Release 1 allows local attackers to access protected data. User interaction is required for triggering this vulnerability. | 2024-09-04 | 5.5 | CVE-2024-34644 | mobile.security@samsung.com |
| samsung -- android | Improper access control in DualDarManagerProxy prior to SMR Sep-2024 Release 1 allows local attackers to cause local permanent denial of service. | 2024-09-04 | 5.5 | CVE-2024-34646 | mobile.security@samsung.com |
| samsung -- android | Incorrect use of privileged API in DualDarManagerProxy prior to SMR Sep-2024 Release 1 allows local attackers to access privileged APIs related to knox without proper license. | 2024-09-04 | 5.5 | CVE-2024-34647 | mobile.security@samsung.com |
| samsung -- android | Improper Handling of Insufficient Permissions in KnoxMiscPolicy prior to SMR Sep-2024 Release 1 allows local attackers to access sensitive data. | 2024-09-04 | 5.5 | CVE-2024-34648 | mobile.security@samsung.com |
| samsung -- android | Improper authorization in My Files prior to SMR Sep-2024 Release 1 allows local attackers to access restricted data in My Files. | 2024-09-04 | 5.5 | CVE-2024-34651 | mobile.security@samsung.com |
| samsung -- android | Improper Export of android application component in My Files prior to SMR Sep-2024 Release 1 allows local attackers to access files with My Files' privilege. | 2024-09-04 | 5.5 | CVE-2024-34654 | mobile.security@samsung.com |
| samsung -- android | Incorrect use of privileged API in UniversalCredentialManager prior to SMR Sep-2024 Release 1 allows local attackers to access privileged API related to UniversalCredentialManager. | 2024-09-04 | 5.5 | CVE-2024-34655 | mobile.security@samsung.com |
| samsung -- android | Improper handling of exceptional conditions in Setupwizard prior to SMR Aug-2024 Release 1 allows physical attackers to bypass proper validation. | 2024-09-04 | 4.6 | CVE-2024-34639 | mobile.security@samsung.com |
| samsung -- android | Improper authorization in One UI Home prior to SMR Sep-2024 Release 1 allows physical attackers to temporarily access sensitive information. | 2024-09-04 | 4.6 | CVE-2024-34642 | mobile.security@samsung.com |
| samsung -- android | Improper input validation in ThemeCenter prior to SMR Sep-2024 Release 1 allows physical attackers to install privileged applications. | 2024-09-04 | 4.6 | CVE-2024-34645 | mobile.security@samsung.com |
| samsung -- android | Path Traversal in My Files prior to SMR Sep-2024 Release 1 allows physical attackers to access directories with My Files' privilege. | 2024-09-04 | 4.6 | CVE-2024-34653 | mobile.security@samsung.com |
| samsung -- assistant | Improper handling of insufficient permissions in Samsung Assistant prior to version 9.1.00.7 allows remote attackers to access location data. User interaction is required for triggering this vulnerability. | 2024-09-04 | 4.3 | CVE-2024-34661 | mobile.security@samsung.com |
| samsung -- group_sharing | Exposure of sensitive information in GroupSharing prior to version 13.6.13.3 allows remote attackers can force the victim to join the group. | 2024-09-04 | 5.3 | CVE-2024-34659 | mobile.security@samsung.com |
| seacms -- seacms | A cross-site scripting (XSS) vulnerability in the component admin_collect_news.php of SeaCMS v12.9 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the siteurl parameter. | 2024-09-03 | 6.1 | CVE-2024-44920 | cve@mitre.org |
| semtekyazilim -- semtek_sempos | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Semtek Informatics Software Consulting Inc. Semtek Sempos allows Reflected XSS.This issue affects Semtek Sempos: through 31072024. | 2024-09-04 | 6.1 | CVE-2024-7077 | iletisim@usom.gov.tr |
| SourceCodester--Clinics Patient Management System | A vulnerability was found in SourceCodester Clinics Patient Management System 2.0. It has been classified as problematic. Affected is an unknown function of the file congratulations.php. The manipulation of the argument goto_page leads to open redirect. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. | 2024-09-07 | 4.3 | CVE-2024-8555 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Food Ordering Management System | A vulnerability classified as critical has been found in SourceCodester Food Ordering Management System 1.0. This affects an unknown part of the file /foms/routers/cancel-order.php. The manipulation of the argument id leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | 2024-09-07 | 6.3 | CVE-2024-8557 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Food Ordering Management System | A vulnerability classified as problematic was found in SourceCodester Food Ordering Management System 1.0. This vulnerability affects unknown code of the file /foms/routers/place-order.php of the component Price Handler. The manipulation of the argument total leads to improper validation of specified quantity in input. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | 2024-09-07 | 4.3 | CVE-2024-8558 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Online Food Menu | A vulnerability, which was classified as critical, has been found in SourceCodester Online Food Menu 1.0. This issue affects some unknown processing of the file /endpoint/delete-menu.php. The manipulation of the argument menu leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. | 2024-09-07 | 4.7 | CVE-2024-8559 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--PHP CRUD | A vulnerability has been found in SourceCodester PHP CRUD 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /endpoint/delete.php of the component Delete Person Handler. The manipulation of the argument person leads to sql injection. The attack can be launched remotely. | 2024-09-07 | 6.3 | CVE-2024-8561 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--PHP CRUD | A vulnerability was found in SourceCodester PHP CRUD 1.0. It has been declared as critical. This vulnerability affects unknown code of the file /endpoint/update.php. The manipulation of the argument tbl_person_id/first_name/middle_name/last_name leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | 2024-09-07 | 6.3 | CVE-2024-8564 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Simple Invoice Generator System | A vulnerability, which was classified as critical, was found in SourceCodester Simple Invoice Generator System 1.0. Affected is an unknown function of the file /save_invoice.php. The manipulation of the argument invoice_code/customer/cashier/total_amount/discount_percentage/discount_amount/tendered_amount leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. | 2024-09-07 | 6.3 | CVE-2024-8560 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| sse-secure-systems -- connaisseur | A vulnerability has been found in Secure Systems Engineering Connaisseur up to 3.3.0 and classified as problematic. This vulnerability affects unknown code of the file connaisseur/res/targets_schema.json of the component Delegation Name Handler. The manipulation leads to inefficient regular expression complexity. The complexity of an attack is rather high. The exploitation appears to be difficult. Upgrading to version 3.3.1 is able to address this issue. The name of the patch is 524b73ff7306707f6d3a4d1e86401479bca91b02. It is recommended to upgrade the affected component. | 2024-09-02 | 5.9 | CVE-2023-7279 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| StylemixThemes--Cost Calculator Builder PRO | The Cost Calculator Builder PRO plugin for WordPress is vulnerable to price manipulation in all versions up to, and including, 3.1.96. This is due to the plugin allowing the price field to be manipulated prior to processing via the 'create_cc_order' function, called from the Cost Calculator Builder plugin. This makes it possible for unauthenticated attackers to manipulate the price of orders submitted via the calculator. Note: this vulnerability was partially patched with the release of Cost Calculator Builder version 3.2.17. | 2024-09-07 | 5.3 | CVE-2024-6010 | security@wordfence.com security@wordfence.com |
| themastercut--Revision Manager TMC | The Revision Manager TMC plugin for WordPress is vulnerable to unauthorized arbitrary email sending due to a missing capability check on the _a_ajaxQuickEmailTestCallback() function in all versions up to, and including, 2.8.19. This makes it possible for authenticated attackers, with subscriber-level access and above, to send emails with arbitrary content to any individual through the vulnerable web server. | 2024-09-06 | 4.3 | CVE-2024-7622 | security@wordfence.com security@wordfence.com security@wordfence.com |
| themelooks--Enter Addons Ultimate Template Builder for Elementor | The Enter Addons - Ultimate Template Builder for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'tag' attribute of the Events Card widget in all versions up to, and including, 2.1.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-09-06 | 6.4 | CVE-2024-7611 | security@wordfence.com security@wordfence.com |
| TOTOLINK--AC1200 T8 | A vulnerability has been found in TOTOLINK AC1200 T8 4.1.5cu.861_B20230220 and classified as critical. This vulnerability affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument slaveIpList leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | 2024-09-08 | 6.3 | CVE-2024-8574 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| trellix -- intrusion_prevention_system_manager | This vulnerability allows unauthenticated remote attackers to bypass authentication and gain partial data access to the vulnerable Trellix IPS Manager with garbage data in response mostly | 2024-09-05 | 5.3 | CVE-2024-5956 | trellixpsirt@trellix.com |
| uglyrobot--Big File Uploads Increase Maximum File Upload Size | The Big File Uploads - Increase Maximum File Upload Size plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 2.1.2. This is due the plugin not sanitizing a file path in an error message. This makes it possible for authenticated attackers, with author-level access and above, to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website. | 2024-09-07 | 4.3 | CVE-2024-8538 | security@wordfence.com security@wordfence.com security@wordfence.com |
| Unknown--Chatbot Support AI: Free ChatGPT Chatbot, Woocommerce Chatbot | The Chatbot Support AI: Free ChatGPT Chatbot, Woocommerce Chatbot WordPress plugin through 1.0.2 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup) | 2024-09-04 | 4.8 | CVE-2024-6722 | contact@wpscan.com |
| Unknown--Chatbot with ChatGPT WordPress | The Chatbot with ChatGPT WordPress plugin before 2.4.5 does not validate access on some REST routes, allowing for an unauthenticated user to purge error and chat logs | 2024-09-05 | 5.3 | CVE-2024-6846 | contact@wpscan.com |
| Unknown--DN Popup | The DN Popup WordPress plugin through 1.2.2 does not have CSRF check in place when updating its settings, which could allow attackers to make a logged in admin change them via a CSRF attack | 2024-09-02 | 5.4 | CVE-2024-7690 | contact@wpscan.com |
| Unknown--Flaming Forms | The Flaming Forms WordPress plugin through 1.0.1 does not sanitise and escape a parameter before outputting it back in the page, leading to a Reflected Cross-Site Scripting which could be used against high privilege users such as admin. | 2024-09-02 | 6.1 | CVE-2024-7692 | contact@wpscan.com |
| Unknown--Flaming Forms | The Flaming Forms WordPress plugin through 1.0.1 does not sanitise and escape some parameters, which could allow unauthenticated users to perform Cross-Site Scripting attacks against administrators. | 2024-09-02 | 5.4 | CVE-2024-7691 | contact@wpscan.com |
| Unknown--Ninja Forms | The Ninja Forms WordPress plugin before 3.8.11 does not escape an URL before outputting it back in an attribute, leading to a Reflected Cross-Site Scripting which could be used against high privilege users such as admin | 2024-09-02 | 6.1 | CVE-2024-7354 | contact@wpscan.com |
| Unknown--Secure Copy Content Protection and Content Locking | The Secure Copy Content Protection and Content Locking WordPress plugin before 4.1.7 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup) | 2024-09-04 | 4.8 | CVE-2024-6888 | contact@wpscan.com |
| Unknown--Secure Copy Content Protection and Content Locking | The Secure Copy Content Protection and Content Locking WordPress plugin before 4.1.7 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup). | 2024-09-04 | 4.8 | CVE-2024-6889 | contact@wpscan.com |
| Unknown--Sign-up Sheets | The Sign-up Sheets WordPress plugin before 2.2.13 does not escape some generated URLs, as well as the $_SERVER['REQUEST_URI'] parameter before outputting them back in attributes, which could lead to Reflected Cross-Site Scripting. | 2024-09-04 | 6.1 | CVE-2024-6020 | contact@wpscan.com |
| vim--vim | Vim is an open source, command line text editor. Patch v9.1.0038 optimized how the cursor position is calculated and removed a loop, that verified that the cursor position always points inside a line and does not become invalid by pointing beyond the end of a line. Back then we assumed this loop is unnecessary. However, this change made it possible that the cursor position stays invalid and points beyond the end of a line, which would eventually cause a heap-buffer-overflow when trying to access the line pointer at the specified cursor position. It's not quite clear yet, what can lead to this situation that the cursor points to an invalid position. That's why patch v9.1.0707 does not include a test case. The only observed impact has been a program crash. This issue has been addressed in with the patch v9.1.0707. All users are advised to upgrade. | 2024-09-02 | 4.5 | CVE-2024-45306 | security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| vinod-dalvi--Ivory Search WordPress Search Plugin | The Ivory Search - WordPress Search Plugin plugin for WordPress is vulnerable to Information Exposure in all versions up to, and including, 5.5.6 via the ajax_load_posts function. This makes it possible for unauthenticated attackers to extract text data from password-protected posts using the boolean-based attack on the AJAX search form | 2024-09-05 | 5.3 | CVE-2024-6835 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| wayos -- fbm-291w_firmware | WAYOS FBM-291W v19.09.11 is vulnerable to Command Execution via msp_info_htm. | 2024-09-04 | 6.8 | CVE-2024-44383 | cve@mitre.org |
| websevendev--Attributes for Blocks | The Attributes for Blocks plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'attributesForBlocks' parameter in all versions up to, and including, 1.0.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-09-04 | 6.4 | CVE-2024-8318 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| wpcodeus--Advanced Sermons | The Advanced Sermons plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'sermon_video_embed' parameter in all versions up to, and including, 3.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-09-06 | 6.4 | CVE-2024-7599 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| wpeka-club--WP AdCenter Ad Manager & Adsense Ads | The WP AdCenter - Ad Manager & Adsense Ads plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'ad_alignment' attribute in all versions up to, and including, 2.5.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | 2024-09-06 | 6.4 | CVE-2024-8317 | security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com security@wordfence.com |
| wpextended -- wp_extended | The The Ultimate WordPress Toolkit - WP Extended plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 3.0.8 via the download_file_ajax function. This makes it possible for authenticated attackers, with subscriber access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. | 2024-09-04 | 6.5 | CVE-2024-8104 | security@wordfence.com security@wordfence.com security@wordfence.com |
| wpextended -- wp_extended | The The Ultimate WordPress Toolkit - WP Extended plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.0.8 via the download_user_ajax function. This makes it possible for authenticated attackers, with Subscriber-level access and above, to extract sensitive data including usernames, hashed passwords, and emails. | 2024-09-04 | 6.5 | CVE-2024-8106 | security@wordfence.com security@wordfence.com security@wordfence.com |
| wpextended -- wp_extended | The The Ultimate WordPress Toolkit - WP Extended plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'selected_option' parameter in all versions up to, and including, 3.0.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | 2024-09-04 | 6.1 | CVE-2024-8117 | security@wordfence.com security@wordfence.com security@wordfence.com |
| wpextended -- wp_extended | The The Ultimate WordPress Toolkit - WP Extended plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the page parameter in all versions up to, and including, 3.0.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. | 2024-09-04 | 6.1 | CVE-2024-8119 | security@wordfence.com security@wordfence.com security@wordfence.com |
| wpextended -- wp_extended | The The Ultimate WordPress Toolkit - WP Extended plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 3.0.8 via the duplicate_post function due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Contributor-level access and above, to duplicate posts written by other authors including admins. This includes the ability to duplicate password-protected posts, which reveals their contents. | 2024-09-04 | 5.4 | CVE-2024-8123 | security@wordfence.com security@wordfence.com security@wordfence.com |
| wpextended -- wp_extended | The The Ultimate WordPress Toolkit - WP Extended plugin for WordPress is vulnerable to unauthorized modification of user names due to a missing capability check on the wpext_change_admin_name() function in all versions up to, and including, 3.0.8. This makes it possible for authenticated attackers, with Subscriber-level access and above, to change an admin's username to a username of their liking as long as the default 'admin' was used. | 2024-09-04 | 4.3 | CVE-2024-8121 | security@wordfence.com security@wordfence.com security@wordfence.com |
| wpshuffle--Frontend Post Submission Manager Lite Frontend Posting WordPress Plugin | The Frontend Post Submission Manager Lite - Frontend Posting WordPress Plugin plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the save_global_settings and process_form_edit functions in all versions up to, and including, 1.2.2. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update the plugin's settings and forms. | 2024-09-06 | 4.3 | CVE-2024-8427 | security@wordfence.com security@wordfence.com security@wordfence.com |
| wpvibes--Form Vibes Database Manager for Forms | The Form Vibes - Database Manager for Forms plugin for WordPress is vulnerable to unauthorized access of data and modification of data due to a missing capability check on the fv_export_csv, reset_settings, save_settings, save_columns_settings, get_analytics_data, get_event_logs_data, delete_submissions, and get_submissions functions in all versions up to, and including, 1.4.12. This makes it possible for authenticated attackers, with Subscriber-level access and above, to perform multiple unauthorized actions. NOTE: This vulnerability is partially fixed in version 1.4.12. | 2024-09-05 | 5.4 | CVE-2024-5309 | security@wordfence.com security@wordfence.com |
| xibosignage--xibo-cms | Xibo is an open source digital signage platform with a web content management system (CMS). Prior to version 4.1.0, a cross-site scripting vulnerability in Xibo CMS allows authorized users to execute arbitrary JavaScript via the file preview function. Users can upload HTML/CSS/JS files into the Xibo Library via the Generic File module to be referenced on Displays and in Layouts. This is intended functionality. When previewing these resources from the Library and Layout editor they are executed in the users browser. This will be disabled in future releases, and users are encouraged to use the new developer tools in 4.1 to design their widgets which require this type of functionality. This behavior has been changed in 4.1.0 to preview previewing of generic files. There are no workarounds for this issue. | 2024-09-03 | 4.6 | CVE-2024-43412 | security-advisories@github.com security-advisories@github.com |
| zyxel -- zld_firmware | A reflected cross-site scripting (XSS) vulnerability in the CGI program "dynamic_script.cgi" of Zyxel ATP series firmware versions from V4.32 through V5.38, USG FLEX series firmware versions from V4.50 through V5.38, USG FLEX 50(W) series firmware versions from V4.16 through V5.38, and USG20(W)-VPN series firmware versions from V4.16 through V5.38 could allow an attacker to trick a user into visiting a crafted URL with the XSS payload. The attacker could obtain browser-based information if the malicious script is executed on the victim's browser. | 2024-09-03 | 6.1 | CVE-2024-42061 | security@zyxel.com.tw |
| zyxel -- zld_firmware | A buffer overflow vulnerability in the CGI program of Zyxel ATP series firmware versions from V4.32 through V5.38, USG FLEX series firmware versions from V4.50 through V5.38, USG FLEX 50(W) series firmware versions from V4.16 through V5.38, and USG20(W)-VPN series firmware versions from V4.16 through V5.38 could allow an authenticated attacker with administrator privileges to cause denial of service (DoS) conditions by sending a crafted HTTP request to a vulnerable device. | 2024-09-03 | 4.9 | CVE-2024-6343 | security@zyxel.com.tw |
| zzcms -- zzcms | Cross Site Scripting vulnerability in ZZCMS v.2023 and before allows a remote attacker to obtain sensitive information via a crafted script to the pagename parameter of the admin/del.php component. | 2024-09-04 | 6.1 | CVE-2024-44819 | cve@mitre.org |
| zzcms -- zzcms | A sensitive information disclosure vulnerability exists in ZZCMS v.2023 and before within the eginfo.php file located at /3/E_bak5.1/upload/. When accessed with the query parameter phome=ShowPHPInfo, the application executes the phpinfo() function, which exposes detailed information about the PHP environment, including server configuration, loaded modules, and environment variables. | 2024-09-04 | 6.1 | CVE-2024-44820 | cve@mitre.org |
Low Vulnerabilities
| Primary Vendor -- Product | Description | Published | CVSS Score | Source Info | Patch Info |
|---|---|---|---|---|---|
| --Yunke Online School System | A vulnerability was found in ?????????? Yunke Online School System up to 1.5.5. It has been declared as problematic. This vulnerability affects unknown code of the file /admin/educloud/videobind.html. The manipulation leads to inclusion of sensitive information in source code. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.6 is able to address this issue. It is recommended to upgrade the affected component. | 2024-09-04 | 3.1 | CVE-2024-8417 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Byron--gitoxide | gix-path is a crate of the gitoxide project dealing with git paths and their conversions. `gix-path` executes `git` to find the path of a configuration file that belongs to the `git` installation itself, but mistakenly treats the local repository's configuration as system-wide if no higher scoped configuration is found. In rare cases, this causes a less trusted repository to be treated as more trusted, or leaks sensitive information from one repository to another, such as sending credentials to another repository's remote. In `gix_path::env`, the underlying implementation of the `installation_config` and `installation_config_prefix` functions calls `git config -l --show-origin` and parses the first line of the output to extract the path to the configuration file holding the configuration variable of highest scope. It is believed to be very difficult to exploit this vulnerability deliberately, due to the need either to anticipate a situation in which higher-scoped configuration variables would be absent, or to arrange for this to happen. Although any operating system may be affected, users running Apple Git on macOS are much less likely to be affected. This issue has been addressed in release version 0.10.10. All users are advised to upgrade. | 2024-09-02 | 2.5 | CVE-2024-45305 | security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| dpgaspar--Flask-AppBuilder | Flask-AppBuilder is an application development framework. Prior to version 4.5.1, the auth DB login form default cache directives allows browser to locally store sensitive data. This can be an issue on environments using shared computer resources. Version 4.5.1 contains a patch for this issue. If upgrading is not possible, configure one's web server to send the specific HTTP headers for `/login` per the directions provided in the GitHub Security Advisory. | 2024-09-04 | 3.6 | CVE-2024-45314 | security-advisories@github.com security-advisories@github.com |
| erjemin--roll_cms | A vulnerability was found in erjemin roll_cms up to 1484fe2c4e0805946a7bcf46218509fcb34883a9. It has been classified as problematic. This affects an unknown part of the file roll_cms/roll_cms/views.py. The manipulation leads to information exposure through error message. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. | 2024-09-08 | 3.5 | CVE-2024-8571 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Gouniverse--GoLang CMS | A vulnerability was found in Gouniverse GoLang CMS 1.4.0. It has been declared as problematic. This vulnerability affects the function PageRenderHtmlByAlias of the file FrontendHandler.go. The manipulation of the argument alias leads to cross site scripting. The attack can be initiated remotely. Upgrading to version 1.4.1 is able to address this issue. The patch is identified as 3e661cdfb4beeb9fe2ad507cdb8104c0b17d072c. It is recommended to upgrade the affected component. | 2024-09-08 | 3.5 | CVE-2024-8572 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| n/a--Windmill | A vulnerability was found in Windmill 1.380.0. It has been classified as problematic. Affected is an unknown function of the file backend/windmill-api/src/users.rs of the component HTTP Request Handler. The manipulation leads to improper restriction of excessive authentication attempts. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. Upgrading to version 1.390.1 is able to address this issue. The patch is identified as acfe7786152f036f2476f93ab5536571514fa9e3. It is recommended to upgrade the affected component. | 2024-09-05 | 3.7 | CVE-2024-8462 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| opencontainers--runc | runc is a CLI tool for spawning and running containers according to the OCI specification. runc 1.1.13 and earlier, as well as 1.2.0-rc2 and earlier, can be tricked into creating empty files or directories in arbitrary locations in the host filesystem by sharing a volume between two containers and exploiting a race with `os.MkdirAll`. While this could be used to create empty files, existing files would not be truncated. An attacker must have the ability to start containers using some kind of custom volume configuration. Containers using user namespaces are still affected, but the scope of places an attacker can create inodes can be significantly reduced. Sufficiently strict LSM policies (SELinux/Apparmor) can also in principle block this attack -- we suspect the industry standard SELinux policy may restrict this attack's scope but the exact scope of protection hasn't been analysed. This is exploitable using runc directly as well as through Docker and Kubernetes. The issue is fixed in runc v1.1.14 and v1.2.0-rc3. Some workarounds are available. Using user namespaces restricts this attack fairly significantly such that the attacker can only create inodes in directories that the remapped root user/group has write access to. Unless the root user is remapped to an actual user on the host (such as with rootless containers that don't use `/etc/sub[ug]id`), this in practice means that an attacker would only be able to create inodes in world-writable directories. A strict enough SELinux or AppArmor policy could in principle also restrict the scope if a specific label is applied to the runc runtime, though neither the extent to which the standard existing policies block this attack nor what exact policies are needed to sufficiently restrict this attack have been thoroughly tested. | 2024-09-03 | 3.6 | CVE-2024-45310 | security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| QNAP Systems Inc.--Helpdesk | A cross-site scripting (XSS) vulnerability has been reported to affect Helpdesk. If exploited, the vulnerability could allow authenticated administrators to inject malicious code via a network. We have already fixed the vulnerability in the following version: Helpdesk 3.3.1 and later | 2024-09-06 | 3.5 | CVE-2024-27125 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | An improper restriction of excessive authentication attempts vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow local network authenticated administrators to perform an arbitrary number of authentication attempts via unspecified vectors. QuTScloud is not affected. We have already fixed the vulnerability in the following versions: QTS 5.2.0.2782 build 20240601 and later QuTS hero h5.2.0.2782 build 20240601 and later | 2024-09-06 | 2.6 | CVE-2024-32771 | security@qnapsecurity.com.tw |
| Red Hat--Red Hat Enterprise Linux 7 | A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. The problem is missing initialization of variables expected to be initialized (as arguments to other functions, etc.). | 2024-09-03 | 3.9 | CVE-2024-45615 | secalert@redhat.com secalert@redhat.com |
| Red Hat--Red Hat Enterprise Linux 7 | A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs. The following problems were caused by insufficient control of the response APDU buffer and its length when communicating with the card. | 2024-09-03 | 3.9 | CVE-2024-45616 | secalert@redhat.com secalert@redhat.com |
| Red Hat--Red Hat Enterprise Linux 7 | A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs. Insufficient or missing checking of return values of functions leads to unexpected work with variables that have not been initialized. | 2024-09-03 | 3.9 | CVE-2024-45617 | secalert@redhat.com secalert@redhat.com |
| Red Hat--Red Hat Enterprise Linux 7 | A vulnerability was found in pkcs15-init in OpenSC. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs. Insufficient or missing checking of return values of functions leads to unexpected work with variables that have not been initialized. | 2024-09-03 | 3.9 | CVE-2024-45618 | secalert@redhat.com secalert@redhat.com |
| Red Hat--Red Hat Enterprise Linux 7 | A vulnerability was found in OpenSC, OpenSC tools, PKCS#11 module, minidriver, and CTK. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs. When buffers are partially filled with data, initialized parts of the buffer can be incorrectly accessed. | 2024-09-03 | 3.9 | CVE-2024-45619 | secalert@redhat.com secalert@redhat.com |
| Red Hat--Red Hat Enterprise Linux 7 | A vulnerability was found in the pkcs15-init tool in OpenSC. An attacker could use a crafted USB Device or Smart Card, which would present the system with a specially crafted response to APDUs. When buffers are partially filled with data, initialized parts of the buffer can be incorrectly accessed. | 2024-09-03 | 3.9 | CVE-2024-45620 | secalert@redhat.com secalert@redhat.com |
| samsung -- android | Improper access control vulnerability in BGProtectManager prior to SMR Sep-2024 Release 1 allows local attackers to bypass restriction of process expiration. | 2024-09-04 | 3.3 | CVE-2024-34640 | mobile.security@samsung.com |
| samsung -- android | Improper Export of Android Application Components in FeliCaTest prior to SMR Sep-2024 Release 1 allows local attackers to enable NFC configuration. | 2024-09-04 | 3.3 | CVE-2024-34641 | mobile.security@samsung.com |
| samsung -- android | Incorrect authorization in CocktailbarService prior to SMR Sep-2024 Release 1 allows local attackers to access privileged APIs related to Edge panel. | 2024-09-04 | 3.3 | CVE-2024-34650 | mobile.security@samsung.com |
| samsung -- android | Incorrect authorization in kperfmon prior to SMR Sep-2024 Release 1 allows local attackers to access information related to performance including app usage. | 2024-09-04 | 3.3 | CVE-2024-34652 | mobile.security@samsung.com |
| samsung -- android | Improper access control in new Dex Mode in multitasking framework prior to SMR Sep-2024 Release 1 allows physical attackers to temporarily access an unlocked screen. | 2024-09-04 | 2.4 | CVE-2024-34649 | mobile.security@samsung.com |
| sigstore--sigstore-go | sigstore-go, a Go library for Sigstore signing and verification, is susceptible to a denial of service attack in versions prior to 0.6.1 when a verifier is provided a maliciously crafted Sigstore Bundle containing large amounts of verifiable data, in the form of signed transparency log entries, RFC 3161 timestamps, and attestation subjects. The verification of these data structures is computationally expensive. This can be used to consume excessive CPU resources, leading to a denial of service attack. TUF's security model labels this type of vulnerability an "Endless data attack," and can lead to verification failing to complete and disrupting services that rely on sigstore-go for verification. This vulnerability is addressed with sigstore-go 0.6.1, which adds hard limits to the number of verifiable data structures that can be processed in a bundle. Verification will fail if a bundle has data that exceeds these limits. The limits are 32 signed transparency log entries, 32 RFC 3161 timestamps, 1024 attestation subjects, and 32 digests per attestation subject. These limits are intended to be high enough to accommodate the vast majority of use cases, while preventing the verification of maliciously crafted bundles that contain large amounts of verifiable data. Users who are vulnerable but unable to quickly upgrade may consider adding manual bundle validation to enforce limits similar to those in the referenced patch prior to calling sigstore-go's verification functions. | 2024-09-04 | 3.1 | CVE-2024-45395 | security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com security-advisories@github.com |
| SourceCodester--Clinics Patient Management System | A vulnerability was found in SourceCodester Clinics Patient Management System 2.0 and classified as problematic. This issue affects some unknown processing of the file /users.php. The manipulation of the argument message leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. | 2024-09-07 | 3.5 | CVE-2024-8554 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Food Ordering Management System | A vulnerability was found in SourceCodester Food Ordering Management System 1.0 and classified as problematic. Affected by this issue is some unknown functionality of the file /index.php. The manipulation of the argument description leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. | 2024-09-08 | 3.5 | CVE-2024-8582 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--Online Bank Management System | A vulnerability was found in SourceCodester Online Bank Management System and Online Bank Management System - 1.0. It has been classified as problematic. This affects an unknown part of the file /mfeedback.php of the component Feedback Handler. The manipulation leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | 2024-09-08 | 3.5 | CVE-2024-8583 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--PHP CRUD | A vulnerability was found in SourceCodester PHP CRUD 1.0 and classified as problematic. Affected by this issue is some unknown functionality of the file /endpoint/Add.php. The manipulation of the argument first_name/middle_name/last_name leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. | 2024-09-07 | 3.5 | CVE-2024-8562 | cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| SourceCodester--PHP CRUD | A vulnerability was found in SourceCodester PHP CRUD 1.0. It has been classified as problematic. This affects an unknown part of the file /endpoint/update.php. The manipulation of the argument first_name/middle_name/last_name leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | 2024-09-07 | 3.5 | CVE-2024-8563 | cna@vuldb.com cna@vuldb.com cna@vuldb.com cna@vuldb.com |
| Unknown--WP ULike | The WP ULike WordPress plugin before 4.7.2.1 does not properly sanitize user display names when rendering on a public page. | 2024-09-06 | 3.5 | CVE-2024-6792 | contact@wpscan.com |
| xibosignage--xibo-cms | Xibo is an open source digital signage platform with a web content management system (CMS). Prior to version 4.1.0, a cross-site scripting vulnerability in Xibo CMS allows authorized users to execute JavaScript via the DataSet functionality. Users can design a DataSet with a HTML column which contains JavaScript, which is intended functionality. The JavaScript gets executed on the Data Entry page and in any Layouts which reference it. This behavior has been changed in 4.1.0 to show HTML/CSS/JS as code on the Data Entry page. There are no workarounds for this issue. | 2024-09-03 | 3.5 | CVE-2024-43413 | security-advisories@github.com security-advisories@github.com |
Severity Not Yet Assigned
| Primary Vendor -- Product | Description | Published | CVSS Score | Source Info | Patch Info |
|---|---|---|---|---|---|
| Apache Software Foundation--Apache Airflow | Apache Airflow versions before 2.10.1 have a vulnerability that allows DAG authors to add local settings to the DAG folder and get it executed by the scheduler, where the scheduler is not supposed to execute code submitted by the DAG author. Users are advised to upgrade to version 2.10.1 or later, which has fixed the vulnerability. | 2024-09-07 | not yet calculated | CVE-2024-45034 | security@apache.org security@apache.org |
| Apache Software Foundation--Apache Airflow | Example DAG: example_inlet_event_extra.py shipped with Apache Airflow version 2.10.0 has a vulnerability that allows an authenticated attacker with only DAG trigger permission to execute arbitrary commands. If you used that example as the base of your DAGs - please review if you have not copied the dangerous example; see https://github.com/apache/airflow/pull/41873 Â for more information. We recommend against exposing the example DAGs in your deployment. If you must expose the example DAGs, upgrade Airflow to version 2.10.1 or later. | 2024-09-07 | not yet calculated | CVE-2024-45498 | security@apache.org security@apache.org |
| Apple--visionOS | The issue was addressed by suspending Persona when the virtual keyboard is active. This issue is fixed in visionOS 1.3. Inputs to the virtual keyboard may be inferred from Persona. | 2024-09-06 | not yet calculated | CVE-2024-40865 | product-security@apple.com |
| Ariva Computer--Accord ORS | Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Ariva Computer Accord ORS allows Retrieve Embedded Sensitive Data.This issue affects Accord ORS: before 7.3.2.1. | 2024-09-06 | not yet calculated | CVE-2024-1744 | iletisim@usom.gov.tr |
| DataFlowX Technology--DataDiodeX | Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in DataFlowX Technology DataDiodeX allows Path Traversal.This issue affects DataDiodeX: from v3.0.0 before v3.1.7. | 2024-09-06 | not yet calculated | CVE-2024-6445 | iletisim@usom.gov.tr |
| Eclipse Foundation--Eclipse Vert.x | In Eclipse Vert.x version 4.3.0 to 4.5.9, the gRPC server does not limit the maximum length of message payload (Maven GAV: io.vertx:vertx-grpc-server and io.vertx:vertx-grpc-client). This is fixed in the 4.5.10 version. Note this does not affect the Vert.x gRPC server based grpc-java and Netty libraries (Maven GAV: io.vertx:vertx-grpc) | 2024-09-04 | not yet calculated | CVE-2024-8391 | emo@eclipse.org emo@eclipse.org |
| Fsas Technologies Inc.--IPCOM EX2 Series | Observable timing discrepancy issue exists in IPCOM EX2 Series V01L02NF0001 to V01L06NF0401, V01L20NF0001 to V01L20NF0401, V02L20NF0001 to V02L21NF0301, and IPCOM VE2 Series V01L04NF0001 to V01L06NF0112. If this vulnerability is exploited, some of the encrypted communication may be decrypted by an attacker who can obtain the contents of the communication. | 2024-09-04 | not yet calculated | CVE-2024-39921 | vultures@jpcert.or.jp vultures@jpcert.or.jp |
| Go standard library--encoding/gob | Calling Decoder.Decode on a message which contains deeply nested structures can cause a panic due to stack exhaustion. This is a follow-up to CVE-2022-30635. | 2024-09-06 | not yet calculated | CVE-2024-34156 | security@golang.org security@golang.org security@golang.org security@golang.org |
| Go standard library--go/build/constraint | Calling Parse on a "// +build" build tag line with deeply nested expressions can cause a panic due to stack exhaustion. | 2024-09-06 | not yet calculated | CVE-2024-34158 | security@golang.org security@golang.org security@golang.org security@golang.org |
| Go standard library--go/parser | Calling any of the Parse functions on Go source code which contains deeply nested literals can cause a panic due to stack exhaustion. | 2024-09-06 | not yet calculated | CVE-2024-34155 | security@golang.org security@golang.org security@golang.org security@golang.org |
| IDEC Corporation--FC6A Series MICROSmart All-in-One CPU module | Cleartext transmission of sensitive information vulnerability exists in multiple IDEC PLCs. If an attacker sends a specific command to PLC's serial communication port, user credentials may be obtained. As a result, the program of the PLC may be obtained, and the PLC may be manipulated. | 2024-09-04 | not yet calculated | CVE-2024-41927 | vultures@jpcert.or.jp vultures@jpcert.or.jp |
| IDEC Corporation--WindLDR | Cleartext storage of sensitive information vulnerability exists in WindLDR and WindO/I-NV4. If this vulnerability is exploited, an attacker who obtained the product's project file may obtain user credentials of the PLC or Operator Interfaces. As a result, an attacker may be able to manipulate and/or suspend the PLC and Operator Interfaces by accessing or hijacking them. | 2024-09-04 | not yet calculated | CVE-2024-41716 | vultures@jpcert.or.jp vultures@jpcert.or.jp |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer In af9035_i2c_master_xfer, msg is controlled by user. When msg[i].buf is null and msg[i].len is zero, former checks on msg[i].buf would be passed. Malicious data finally reach af9035_i2c_master_xfer. If accessing msg[i].buf[0] without sanity check, null ptr deref would happen. We add check on msg[i].len to prevent crash. Similar commit: commit 0ed554fd769a ("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()") | 2024-09-06 | not yet calculated | CVE-2023-52915 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: media: aspeed: Fix memory overwrite if timing is 1600x900 When capturing 1600x900, system could crash when system memory usage is tight. The way to reproduce this issue: 1. Use 1600x900 to display on host 2. Mount ISO through 'Virtual media' on OpenBMC's web 3. Run script as below on host to do sha continuously #!/bin/bash while [ [1] ]; do find /media -type f -printf '"%h/%f"\n' | xargs sha256sum done 4. Open KVM on OpenBMC's web The size of macro block captured is 8x8. Therefore, we should make sure the height of src-buf is 8 aligned to fix this issue. | 2024-09-06 | not yet calculated | CVE-2023-52916 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: fuse: Initialize beyond-EOF page contents before setting uptodate fuse_notify_store(), unlike fuse_do_readpage(), does not enable page zeroing (because it can be used to change partial page contents). So fuse_notify_store() must be more careful to fully initialize page contents (including parts of the page that are beyond end-of-file) before marking the page uptodate. The current code can leave beyond-EOF page contents uninitialized, which makes these uninitialized page contents visible to userspace via mmap(). This is an information leak, but only affects systems which do not enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the corresponding kernel command line parameter). | 2024-09-02 | not yet calculated | CVE-2024-44947 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: x86/mtrr: Check if fixed MTRRs exist before saving them MTRRs have an obsolete fixed variant for fine grained caching control of the 640K-1MB region that uses separate MSRs. This fixed variant has a separate capability bit in the MTRR capability MSR. So far all x86 CPUs which support MTRR have this separate bit set, so it went unnoticed that mtrr_save_state() does not check the capability bit before accessing the fixed MTRR MSRs. Though on a CPU that does not support the fixed MTRR capability this results in a #GP. The #GP itself is harmless because the RDMSR fault is handled gracefully, but results in a WARN_ON(). Add the missing capability check to prevent this. | 2024-09-04 | not yet calculated | CVE-2024-44948 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: parisc: fix a possible DMA corruption ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be possible that two unrelated 16-byte allocations share a cache line. If one of these allocations is written using DMA and the other is written using cached write, the value that was written with DMA may be corrupted. This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 - that's the largest possible cache line size. As different parisc microarchitectures have different cache line size, we define arch_slab_minalign(), cache_line_size() and dma_get_cache_alignment() so that the kernel may tune slab cache parameters dynamically, based on the detected cache line size. | 2024-09-04 | not yet calculated | CVE-2024-44949 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix invalid FIFO access with special register set When enabling access to the special register set, Receiver time-out and RHR interrupts can happen. In this case, the IRQ handler will try to read from the FIFO thru the RHR register at address 0x00, but address 0x00 is mapped to DLL register, resulting in erroneous FIFO reading. Call graph example: sc16is7xx_startup(): entry sc16is7xx_ms_proc(): entry sc16is7xx_set_termios(): entry sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set sc16is7xx_port_irq() entry --> IIR is 0x0C sc16is7xx_handle_rx() entry sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is mapped to DLL (LCR=LCR_CONF_MODE_A) sc16is7xx_set_baud(): exit --> Restore access to general register set Fix the problem by claiming the efr_lock mutex when accessing the Special register set. | 2024-09-04 | not yet calculated | CVE-2024-44950 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix TX fifo corruption Sometimes, when a packet is received on channel A at almost the same time as a packet is about to be transmitted on channel B, we observe with a logic analyzer that the received packet on channel A is transmitted on channel B. In other words, the Tx buffer data on channel B is corrupted with data from channel A. The problem appeared since commit 4409df5866b7 ("serial: sc16is7xx: change EFR lock to operate on each channels"), which changed the EFR locking to operate on each channel instead of chip-wise. This commit has introduced a regression, because the EFR lock is used not only to protect the EFR registers access, but also, in a very obscure and undocumented way, to protect access to the data buffer, which is shared by the Tx and Rx handlers, but also by each channel of the IC. Fix this regression first by switching to kfifo_out_linear_ptr() in sc16is7xx_handle_tx() to eliminate the need for a shared Rx/Tx buffer. Secondly, replace the chip-wise Rx buffer with a separate Rx buffer for each channel. | 2024-09-04 | not yet calculated | CVE-2024-44951 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: Fix racy access to midibuf There can be concurrent accesses to line6 midibuf from both the URB completion callback and the rawmidi API access. This could be a cause of KMSAN warning triggered by syzkaller below (so put as reported-by here). This patch protects the midibuf call of the former code path with a spinlock for avoiding the possible races. | 2024-09-04 | not yet calculated | CVE-2024-44954 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Don't refer to dc_sink in is_dsc_need_re_compute [Why] When unplug one of monitors connected after mst hub, encounter null pointer dereference. It's due to dc_sink get released immediately in early_unregister() or detect_ctx(). When commit new state which directly referring to info stored in dc_sink will cause null pointer dereference. [how] Remove redundant checking condition. Relevant condition should already be covered by checking if dsc_aux is null or not. Also reset dsc_aux to NULL when the connector is disconnected. | 2024-09-04 | not yet calculated | CVE-2024-44955 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: sched/smt: Fix unbalance sched_smt_present dec/inc I got the following warn report while doing stress test: jump label: negative count! WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0 Call Trace: <TASK> __static_key_slow_dec_cpuslocked+0x16/0x70 sched_cpu_deactivate+0x26e/0x2a0 cpuhp_invoke_callback+0x3ad/0x10d0 cpuhp_thread_fun+0x3f5/0x680 smpboot_thread_fn+0x56d/0x8d0 kthread+0x309/0x400 ret_from_fork+0x41/0x70 ret_from_fork_asm+0x1b/0x30 </TASK> Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(), the cpu offline failed, but sched_smt_present is decremented before calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so fix it by incrementing sched_smt_present in the error path. | 2024-09-04 | not yet calculated | CVE-2024-44958 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tracefs: Use generic inode RCU for synchronizing freeing With structure layout randomization enabled for 'struct inode' we need to avoid overlapping any of the RCU-used / initialized-only-once members, e.g. i_lru or i_sb_list to not corrupt related list traversals when making use of the rcu_head. For an unlucky structure layout of 'struct inode' we may end up with the following splat when running the ftrace selftests: [<...>] list_del corruption, ffff888103ee2cb0->next (tracefs_inode_cache+0x0/0x4e0 [slab object]) is NULL (prev is tracefs_inode_cache+0x78/0x4e0 [slab object]) [<...>] ------------[ cut here ]------------ [<...>] kernel BUG at lib/list_debug.c:54! [<...>] invalid opcode: 0000 [#1] PREEMPT SMP KASAN [<...>] CPU: 3 PID: 2550 Comm: mount Tainted: G N 6.8.12-grsec+ #122 ed2f536ca62f28b087b90e3cc906a8d25b3ddc65 [<...>] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [<...>] RIP: 0010:[<ffffffff84656018>] __list_del_entry_valid_or_report+0x138/0x3e0 [<...>] Code: 48 b8 99 fb 65 f2 ff ff ff ff e9 03 5c d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff e9 33 5a d9 fc cc 48 b8 99 fb 65 f2 ff ff ff ff <0f> 0b 4c 89 e9 48 89 ea 48 89 ee 48 c7 c7 60 8f dd 89 31 c0 e8 2f [<...>] RSP: 0018:fffffe80416afaf0 EFLAGS: 00010283 [<...>] RAX: 0000000000000098 RBX: ffff888103ee2cb0 RCX: 0000000000000000 [<...>] RDX: ffffffff84655fe8 RSI: ffffffff89dd8b60 RDI: 0000000000000001 [<...>] RBP: ffff888103ee2cb0 R08: 0000000000000001 R09: fffffbd0082d5f25 [<...>] R10: fffffe80416af92f R11: 0000000000000001 R12: fdf99c16731d9b6d [<...>] R13: 0000000000000000 R14: ffff88819ad4b8b8 R15: 0000000000000000 [<...>] RBX: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RDX: __list_del_entry_valid_or_report+0x108/0x3e0 [<...>] RSI: __func__.47+0x4340/0x4400 [<...>] RBP: tracefs_inode_cache+0x0/0x4e0 [slab object] [<...>] RSP: process kstack fffffe80416afaf0+0x7af0/0x8000 [mount 2550 2550] [<...>] R09: kasan shadow of process kstack fffffe80416af928+0x7928/0x8000 [mount 2550 2550] [<...>] R10: process kstack fffffe80416af92f+0x792f/0x8000 [mount 2550 2550] [<...>] R14: tracefs_inode_cache+0x78/0x4e0 [slab object] [<...>] FS: 00006dcb380c1840(0000) GS:ffff8881e0600000(0000) knlGS:0000000000000000 [<...>] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [<...>] CR2: 000076ab72b30e84 CR3: 000000000b088004 CR4: 0000000000360ef0 shadow CR4: 0000000000360ef0 [<...>] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [<...>] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [<...>] ASID: 0003 [<...>] Stack: [<...>] ffffffff818a2315 00000000f5c856ee ffffffff896f1840 ffff888103ee2cb0 [<...>] ffff88812b6b9750 0000000079d714b6 fffffbfff1e9280b ffffffff8f49405f [<...>] 0000000000000001 0000000000000000 ffff888104457280 ffffffff8248b392 [<...>] Call Trace: [<...>] <TASK> [<...>] [<ffffffff818a2315>] ? lock_release+0x175/0x380 fffffe80416afaf0 [<...>] [<ffffffff8248b392>] list_lru_del+0x152/0x740 fffffe80416afb48 [<...>] [<ffffffff8248ba93>] list_lru_del_obj+0x113/0x280 fffffe80416afb88 [<...>] [<ffffffff8940fd19>] ? _atomic_dec_and_lock+0x119/0x200 fffffe80416afb90 [<...>] [<ffffffff8295b244>] iput_final+0x1c4/0x9a0 fffffe80416afbb8 [<...>] [<ffffffff8293a52b>] dentry_unlink_inode+0x44b/0xaa0 fffffe80416afbf8 [<...>] [<ffffffff8293fefc>] __dentry_kill+0x23c/0xf00 fffffe80416afc40 [<...>] [<ffffffff8953a85f>] ? __this_cpu_preempt_check+0x1f/0xa0 fffffe80416afc48 [<...>] [<ffffffff82949ce5>] ? shrink_dentry_list+0x1c5/0x760 fffffe80416afc70 [<...>] [<ffffffff82949b71>] ? shrink_dentry_list+0x51/0x760 fffffe80416afc78 [<...>] [<ffffffff82949da8>] shrink_dentry_list+0x288/0x760 fffffe80416afc80 [<...>] [<ffffffff8294ae75>] shrink_dcache_sb+0x155/0x420 fffffe80416afcc8 [<...>] [<ffffffff8953a7c3>] ? debug_smp_processor_id+0x23/0xa0 fffffe80416afce0 [<...>] [<ffffffff8294ad20>] ? do_one_tre ---truncated--- | 2024-09-04 | not yet calculated | CVE-2024-44959 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: core: Check for unset descriptor Make sure the descriptor has been set before looking at maxpacket. This fixes a null pointer panic in this case. This may happen if the gadget doesn't properly set up the endpoint for the current speed, or the gadget descriptors are malformed and the descriptor for the speed/endpoint are not found. No current gadget driver is known to have this problem, but this may cause a hard-to-find bug during development of new gadgets. | 2024-09-04 | not yet calculated | CVE-2024-44960 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Forward soft recovery errors to userspace As we discussed before[1], soft recovery should be forwarded to userspace, or we can get into a really bad state where apps will keep submitting hanging command buffers cascading us to a hard reset. 1: https://lore.kernel.org/all/bf23d5ed-9a6b-43e7-84ee-8cbfd0d60f18@froggi.es/ (cherry picked from commit 434967aadbbbe3ad9103cc29e9a327de20fdba01) | 2024-09-04 | not yet calculated | CVE-2024-44961 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Shutdown timer and prevent rearming when driver unloading When unload the btnxpuart driver, its associated timer will be deleted. If the timer happens to be modified at this moment, it leads to the kernel call this timer even after the driver unloaded, resulting in kernel panic. Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming. panic log: Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP Modules linked in: algif_hash algif_skcipher af_alg moal(O) mlan(O) crct10dif_ce polyval_ce polyval_generic snd_soc_imx_card snd_soc_fsl_asoc_card snd_soc_imx_audmux mxc_jpeg_encdec v4l2_jpeg snd_soc_wm8962 snd_soc_fsl_micfil snd_soc_fsl_sai flexcan snd_soc_fsl_utils ap130x rpmsg_ctrl imx_pcm_dma can_dev rpmsg_char pwm_fan fuse [last unloaded: btnxpuart] CPU: 5 PID: 723 Comm: memtester Tainted: G O 6.6.23-lts-next-06207-g4aef2658ac28 #1 Hardware name: NXP i.MX95 19X19 board (DT) pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0xffff80007a2cf464 lr : call_timer_fn.isra.0+0x24/0x80 ... Call trace: 0xffff80007a2cf464 __run_timers+0x234/0x280 run_timer_softirq+0x20/0x40 __do_softirq+0x100/0x26c ____do_softirq+0x10/0x1c call_on_irq_stack+0x24/0x4c do_softirq_own_stack+0x1c/0x2c irq_exit_rcu+0xc0/0xdc el0_interrupt+0x54/0xd8 __el0_irq_handler_common+0x18/0x24 el0t_64_irq_handler+0x10/0x1c el0t_64_irq+0x190/0x194 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,c0000000,40028143,1000721b Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- | 2024-09-04 | not yet calculated | CVE-2024-44962 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: btrfs: do not BUG_ON() when freeing tree block after error When freeing a tree block, at btrfs_free_tree_block(), if we fail to create a delayed reference we don't deal with the error and just do a BUG_ON(). The error most likely to happen is -ENOMEM, and we have a comment mentioning that only -ENOMEM can happen, but that is not true, because in case qgroups are enabled any error returned from btrfs_qgroup_trace_extent_post() (can be -EUCLEAN or anything returned from btrfs_search_slot() for example) can be propagated back to btrfs_free_tree_block(). So stop doing a BUG_ON() and return the error to the callers and make them abort the transaction to prevent leaking space. Syzbot was triggering this, likely due to memory allocation failure injection. | 2024-09-04 | not yet calculated | CVE-2024-44963 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix pti_clone_pgtable() alignment assumption Guenter reported dodgy crashes on an i386-nosmp build using GCC-11 that had the form of endless traps until entry stack exhaust and then #DF from the stack guard. It turned out that pti_clone_pgtable() had alignment assumptions on the start address, notably it hard assumes start is PMD aligned. This is true on x86_64, but very much not true on i386. These assumptions can cause the end condition to malfunction, leading to a 'short' clone. Guess what happens when the user mapping has a short copy of the entry text? Use the correct increment form for addr to avoid alignment assumptions. | 2024-09-04 | not yet calculated | CVE-2024-44965 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: binfmt_flat: Fix corruption when not offsetting data start Commit 04d82a6d0881 ("binfmt_flat: allow not offsetting data start") introduced a RISC-V specific variant of the FLAT format which does not allocate any space for the (obsolete) array of shared library pointers. However, it did not disable the code which initializes the array, resulting in the corruption of sizeof(long) bytes before the DATA segment, generally the end of the TEXT segment. Introduce MAX_SHARED_LIBS_UPDATE which depends on the state of CONFIG_BINFMT_FLAT_NO_DATA_START_OFFSET to guard the initialization of the shared library pointer region so that it will only be initialized if space is reserved for it. | 2024-09-04 | not yet calculated | CVE-2024-44966 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/mgag200: Bind I2C lifetime to DRM device Managed cleanup with devm_add_action_or_reset() will release the I2C adapter when the underlying Linux device goes away. But the connector still refers to it, so this cleanup leaves behind a stale pointer in struct drm_connector.ddc. Bind the lifetime of the I2C adapter to the connector's lifetime by using DRM's managed release. When the DRM device goes away (after the Linux device) DRM will first clean up the connector and then clean up the I2C adapter. | 2024-09-04 | not yet calculated | CVE-2024-44967 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tick/broadcast: Move per CPU pointer access into the atomic section The recent fix for making the take over of the broadcast timer more reliable retrieves a per CPU pointer in preemptible context. This went unnoticed as compilers hoist the access into the non-preemptible region where the pointer is actually used. But of course it's valid that the compiler keeps it at the place where the code puts it which rightfully triggers: BUG: using smp_processor_id() in preemptible [00000000] code: caller is hotplug_cpu__broadcast_tick_pull+0x1c/0xc0 Move it to the actual usage site which is in a non-preemptible region. | 2024-09-04 | not yet calculated | CVE-2024-44968 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: s390/sclp: Prevent release of buffer in I/O When a task waiting for completion of a Store Data operation is interrupted, an attempt is made to halt this operation. If this attempt fails due to a hardware or firmware problem, there is a chance that the SCLP facility might store data into buffers referenced by the original operation at a later time. Handle this situation by not releasing the referenced data buffers if the halt attempt fails. For current use cases, this might result in a leak of few pages of memory in case of a rare hardware/firmware malfunction. | 2024-09-04 | not yet calculated | CVE-2024-44969 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: SHAMPO, Fix invalid WQ linked list unlink When all the strides in a WQE have been consumed, the WQE is unlinked from the WQ linked list (mlx5_wq_ll_pop()). For SHAMPO, it is possible to receive CQEs with 0 consumed strides for the same WQE even after the WQE is fully consumed and unlinked. This triggers an additional unlink for the same wqe which corrupts the linked list. Fix this scenario by accepting 0 sized consumed strides without unlinking the WQE again. | 2024-09-04 | not yet calculated | CVE-2024-44970 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: btrfs: do not clear page dirty inside extent_write_locked_range() [BUG] For subpage + zoned case, the following workload can lead to rsv data leak at unmount time: # mkfs.btrfs -f -s 4k $dev # mount $dev $mnt # fsstress -w -n 8 -d $mnt -s 1709539240 0/0: fiemap - no filename 0/1: copyrange read - no filename 0/2: write - no filename 0/3: rename - no source filename 0/4: creat f0 x:0 0 0 0/4: creat add id=0,parent=-1 0/5: writev f0[259 1 0 0 0 0] [778052,113,965] 0 0/6: ioctl(FIEMAP) f0[259 1 0 0 224 887097] [1294220,2291618343991484791,0x10000] -1 0/7: dwrite - xfsctl(XFS_IOC_DIOINFO) f0[259 1 0 0 224 887097] return 25, fallback to stat() 0/7: dwrite f0[259 1 0 0 224 887097] [696320,102400] 0 # umount $mnt The dmesg includes the following rsv leak detection warning (all call trace skipped): ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8653 btrfs_destroy_inode+0x1e0/0x200 [btrfs] ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8654 btrfs_destroy_inode+0x1a8/0x200 [btrfs] ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ WARNING: CPU: 2 PID: 4528 at fs/btrfs/inode.c:8660 btrfs_destroy_inode+0x1a0/0x200 [btrfs] ---[ end trace 0000000000000000 ]--- BTRFS info (device sda): last unmount of filesystem 1b4abba9-de34-4f07-9e7f-157cf12a18d6 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs] ---[ end trace 0000000000000000 ]--- BTRFS info (device sda): space_info DATA has 268218368 free, is not full BTRFS info (device sda): space_info total=268435456, used=204800, pinned=0, reserved=0, may_use=12288, readonly=0 zone_unusable=0 BTRFS info (device sda): global_block_rsv: size 0 reserved 0 BTRFS info (device sda): trans_block_rsv: size 0 reserved 0 BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 4528 at fs/btrfs/block-group.c:4434 btrfs_free_block_groups+0x338/0x500 [btrfs] ---[ end trace 0000000000000000 ]--- BTRFS info (device sda): space_info METADATA has 267796480 free, is not full BTRFS info (device sda): space_info total=268435456, used=131072, pinned=0, reserved=0, may_use=262144, readonly=0 zone_unusable=245760 BTRFS info (device sda): global_block_rsv: size 0 reserved 0 BTRFS info (device sda): trans_block_rsv: size 0 reserved 0 BTRFS info (device sda): chunk_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_block_rsv: size 0 reserved 0 BTRFS info (device sda): delayed_refs_rsv: size 0 reserved 0 Above $dev is a tcmu-runner emulated zoned HDD, which has a max zone append size of 64K, and the system has 64K page size. [CAUSE] I have added several trace_printk() to show the events (header skipped): > btrfs_dirty_pages: r/i=5/259 dirty start=774144 len=114688 > btrfs_dirty_pages: r/i=5/259 dirty part of page=720896 off_in_page=53248 len_in_page=12288 > btrfs_dirty_pages: r/i=5/259 dirty part of page=786432 off_in_page=0 len_in_page=65536 > btrfs_dirty_pages: r/i=5/259 dirty part of page=851968 off_in_page=0 len_in_page=36864 The above lines show our buffered write has dirtied 3 pages of inode 259 of root 5: 704K 768K 832K 896K I |////I/////////////////I///////////| I 756K 868K |///| is the dirtied range using subpage bitmaps. and 'I' is the page boundary. Meanwhile all three pages (704K, 768K, 832K) have their PageDirty flag set. > btrfs_direct_write: r/i=5/259 start dio filepos=696320 len=102400 Then direct IO writ ---truncated--- | 2024-09-04 | not yet calculated | CVE-2024-44972 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: mm, slub: do not call do_slab_free for kfence object In 782f8906f805 the freeing of kfence objects was moved from deep inside do_slab_free to the wrapper functions outside. This is a nice change, but unfortunately it missed one spot in __kmem_cache_free_bulk. This results in a crash like this: BUG skbuff_head_cache (Tainted: G S B E ): Padding overwritten. 0xffff88907fea0f00-0xffff88907fea0fff @offset=3840 slab_err (mm/slub.c:1129) free_to_partial_list (mm/slub.c:? mm/slub.c:4036) slab_pad_check (mm/slub.c:864 mm/slub.c:1290) check_slab (mm/slub.c:?) free_to_partial_list (mm/slub.c:3171 mm/slub.c:4036) kmem_cache_alloc_bulk (mm/slub.c:? mm/slub.c:4495 mm/slub.c:4586 mm/slub.c:4635) napi_build_skb (net/core/skbuff.c:348 net/core/skbuff.c:527 net/core/skbuff.c:549) All the other callers to do_slab_free appear to be ok. Add a kfence_free check in __kmem_cache_free_bulk to avoid the crash. | 2024-09-04 | not yet calculated | CVE-2024-44973 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: fix panic caused by partcmd_update We find a bug as below: BUG: unable to handle page fault for address: 00000003 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 358 Comm: bash Tainted: G W I 6.6.0-10893-g60d6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/4 RIP: 0010:partition_sched_domains_locked+0x483/0x600 Code: 01 48 85 d2 74 0d 48 83 05 29 3f f8 03 01 f3 48 0f bc c2 89 c0 48 9 RSP: 0018:ffffc90000fdbc58 EFLAGS: 00000202 RAX: 0000000100000003 RBX: ffff888100b3dfa0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000002fe80 RBP: ffff888100b3dfb0 R08: 0000000000000001 R09: 0000000000000000 R10: ffffc90000fdbcb0 R11: 0000000000000004 R12: 0000000000000002 R13: ffff888100a92b48 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f44a5425740(0000) GS:ffff888237d80000(0000) knlGS:0000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000100030973 CR3: 000000010722c000 CR4: 00000000000006e0 Call Trace: <TASK> ? show_regs+0x8c/0xa0 ? __die_body+0x23/0xa0 ? __die+0x3a/0x50 ? page_fault_oops+0x1d2/0x5c0 ? partition_sched_domains_locked+0x483/0x600 ? search_module_extables+0x2a/0xb0 ? search_exception_tables+0x67/0x90 ? kernelmode_fixup_or_oops+0x144/0x1b0 ? __bad_area_nosemaphore+0x211/0x360 ? up_read+0x3b/0x50 ? bad_area_nosemaphore+0x1a/0x30 ? exc_page_fault+0x890/0xd90 ? __lock_acquire.constprop.0+0x24f/0x8d0 ? __lock_acquire.constprop.0+0x24f/0x8d0 ? asm_exc_page_fault+0x26/0x30 ? partition_sched_domains_locked+0x483/0x600 ? partition_sched_domains_locked+0xf0/0x600 rebuild_sched_domains_locked+0x806/0xdc0 update_partition_sd_lb+0x118/0x130 cpuset_write_resmask+0xffc/0x1420 cgroup_file_write+0xb2/0x290 kernfs_fop_write_iter+0x194/0x290 new_sync_write+0xeb/0x160 vfs_write+0x16f/0x1d0 ksys_write+0x81/0x180 __x64_sys_write+0x21/0x30 x64_sys_call+0x2f25/0x4630 do_syscall_64+0x44/0xb0 entry_SYSCALL_64_after_hwframe+0x78/0xe2 RIP: 0033:0x7f44a553c887 It can be reproduced with cammands: cd /sys/fs/cgroup/ mkdir test cd test/ echo +cpuset > ../cgroup.subtree_control echo root > cpuset.cpus.partition cat /sys/fs/cgroup/cpuset.cpus.effective 0-3 echo 0-3 > cpuset.cpus // taking away all cpus from root This issue is caused by the incorrect rebuilding of scheduling domains. In this scenario, test/cpuset.cpus.partition should be an invalid root and should not trigger the rebuilding of scheduling domains. When calling update_parent_effective_cpumask with partcmd_update, if newmask is not null, it should recheck newmask whether there are cpus is available for parect/cs that has tasks. | 2024-09-04 | not yet calculated | CVE-2024-44975 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: ata: pata_macio: Fix DMA table overflow Kolbjørn and Jonáš reported that their 32-bit PowerMacs were crashing in pata-macio since commit 09fe2bfa6b83 ("ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K"). For example: kernel BUG at drivers/ata/pata_macio.c:544! Oops: Exception in kernel mode, sig: 5 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 DEBUG_PAGEALLOC PowerMac ... NIP pata_macio_qc_prep+0xf4/0x190 LR pata_macio_qc_prep+0xfc/0x190 Call Trace: 0xc1421660 (unreliable) ata_qc_issue+0x14c/0x2d4 __ata_scsi_queuecmd+0x200/0x53c ata_scsi_queuecmd+0x50/0xe0 scsi_queue_rq+0x788/0xb1c __blk_mq_issue_directly+0x58/0xf4 blk_mq_plug_issue_direct+0x8c/0x1b4 blk_mq_flush_plug_list.part.0+0x584/0x5e0 __blk_flush_plug+0xf8/0x194 __submit_bio+0x1b8/0x2e0 submit_bio_noacct_nocheck+0x230/0x304 btrfs_work_helper+0x200/0x338 process_one_work+0x1a8/0x338 worker_thread+0x364/0x4c0 kthread+0x100/0x104 start_kernel_thread+0x10/0x14 That commit increased max_segment_size to 64KB, with the justification that the SCSI core was already using that size when PAGE_SIZE == 64KB, and that there was existing logic to split over-sized requests. However with a sufficiently large request, the splitting logic causes each sg to be split into two commands in the DMA table, leading to overflow of the DMA table, triggering the BUG_ON(). With default settings the bug doesn't trigger, because the request size is limited by max_sectors_kb == 1280, however max_sectors_kb can be increased, and apparently some distros do that by default using udev rules. Fix the bug for 4KB kernels by reverting to the old max_segment_size. For 64KB kernels the sg_tablesize needs to be halved, to allow for the possibility that each sg will be split into two. | 2024-09-04 | not yet calculated | CVE-2024-44976 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Validate TA binary size Add TA binary size validation to avoid OOB write. (cherry picked from commit c0a04e3570d72aaf090962156ad085e37c62e442) | 2024-09-04 | not yet calculated | CVE-2024-44977 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Free job before xe_exec_queue_put Free job depends on job->vm being valid, the last xe_exec_queue_put can destroy the VM. Prevent UAF by freeing job before xe_exec_queue_put. (cherry picked from commit 32a42c93b74c8ca6d0915ea3eba21bceff53042f) | 2024-09-04 | not yet calculated | CVE-2024-44978 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix missing workqueue destroy in xe_gt_pagefault On driver reload we never free up the memory for the pagefault and access counter workqueues. Add those destroy calls here. (cherry picked from commit 7586fc52b14e0b8edd0d1f8a434e0de2078b7b2b) | 2024-09-04 | not yet calculated | CVE-2024-44979 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix opregion leak Being part o the display, ideally the setup and cleanup would be done by display itself. However this is a bigger refactor that needs to be done on both i915 and xe. For now, just fix the leak: unreferenced object 0xffff8881a0300008 (size 192): comm "modprobe", pid 4354, jiffies 4295647021 hex dump (first 32 bytes): 00 00 87 27 81 88 ff ff 18 80 9b 00 00 c9 ff ff ...'............ 18 81 9b 00 00 c9 ff ff 00 00 00 00 00 00 00 00 ................ backtrace (crc 99260e31): [<ffffffff823ce65b>] kmemleak_alloc+0x4b/0x80 [<ffffffff81493be2>] kmalloc_trace_noprof+0x312/0x3d0 [<ffffffffa1345679>] intel_opregion_setup+0x89/0x700 [xe] [<ffffffffa125bfaf>] xe_display_init_noirq+0x2f/0x90 [xe] [<ffffffffa1199ec3>] xe_device_probe+0x7a3/0xbf0 [xe] [<ffffffffa11f3713>] xe_pci_probe+0x333/0x5b0 [xe] [<ffffffff81af6be8>] local_pci_probe+0x48/0xb0 [<ffffffff81af8778>] pci_device_probe+0xc8/0x280 [<ffffffff81d09048>] really_probe+0xf8/0x390 [<ffffffff81d0937a>] __driver_probe_device+0x8a/0x170 [<ffffffff81d09503>] driver_probe_device+0x23/0xb0 [<ffffffff81d097b7>] __driver_attach+0xc7/0x190 [<ffffffff81d0628d>] bus_for_each_dev+0x7d/0xd0 [<ffffffff81d0851e>] driver_attach+0x1e/0x30 [<ffffffff81d07ac7>] bus_add_driver+0x117/0x250 (cherry picked from commit 6f4e43a2f771b737d991142ec4f6d4b7ff31fbb4) | 2024-09-04 | not yet calculated | CVE-2024-44980 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: cleanup FB if dpu_format_populate_layout fails If the dpu_format_populate_layout() fails, then FB is prepared, but not cleaned up. This ends up leaking the pin_count on the GEM object and causes a splat during DRM file closure: msm_obj->pin_count WARNING: CPU: 2 PID: 569 at drivers/gpu/drm/msm/msm_gem.c:121 update_lru_locked+0xc4/0xcc [...] Call trace: update_lru_locked+0xc4/0xcc put_pages+0xac/0x100 msm_gem_free_object+0x138/0x180 drm_gem_object_free+0x1c/0x30 drm_gem_object_handle_put_unlocked+0x108/0x10c drm_gem_object_release_handle+0x58/0x70 idr_for_each+0x68/0xec drm_gem_release+0x28/0x40 drm_file_free+0x174/0x234 drm_release+0xb0/0x160 __fput+0xc0/0x2c8 __fput_sync+0x50/0x5c __arm64_sys_close+0x38/0x7c invoke_syscall+0x48/0x118 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x4c/0x120 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 irq event stamp: 129818 hardirqs last enabled at (129817): [<ffffa5f6d953fcc0>] console_unlock+0x118/0x124 hardirqs last disabled at (129818): [<ffffa5f6da7dcf04>] el1_dbg+0x24/0x8c softirqs last enabled at (129808): [<ffffa5f6d94afc18>] handle_softirqs+0x4c8/0x4e8 softirqs last disabled at (129785): [<ffffa5f6d94105e4>] __do_softirq+0x14/0x20 Patchwork: https://patchwork.freedesktop.org/patch/600714/ | 2024-09-04 | not yet calculated | CVE-2024-44982 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: validate vlan header Ensure there is sufficient room to access the protocol field of the VLAN header, validate it once before the flowtable lookup. ===================================================== BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626 nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline] nf_ingress net/core/dev.c:5440 [inline] | 2024-09-04 | not yet calculated | CVE-2024-44983 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix double DMA unmapping for XDP_REDIRECT Remove the dma_unmap_page_attrs() call in the driver's XDP_REDIRECT code path. This should have been removed when we let the page pool handle the DMA mapping. This bug causes the warning: WARNING: CPU: 7 PID: 59 at drivers/iommu/dma-iommu.c:1198 iommu_dma_unmap_page+0xd5/0x100 CPU: 7 PID: 59 Comm: ksoftirqd/7 Tainted: G W 6.8.0-1010-gcp #11-Ubuntu Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.15.2 04/02/2024 RIP: 0010:iommu_dma_unmap_page+0xd5/0x100 Code: 89 ee 48 89 df e8 cb f2 69 ff 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 31 f6 31 ff 45 31 c0 e9 ab 17 71 00 <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 c9 RSP: 0018:ffffab1fc0597a48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff99ff838280c8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffab1fc0597a78 R08: 0000000000000002 R09: ffffab1fc0597c1c R10: ffffab1fc0597cd3 R11: ffff99ffe375acd8 R12: 00000000e65b9000 R13: 0000000000000050 R14: 0000000000001000 R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff9a06efb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000565c34c37210 CR3: 00000005c7e3e000 CR4: 0000000000350ef0 ? show_regs+0x6d/0x80 ? __warn+0x89/0x150 ? iommu_dma_unmap_page+0xd5/0x100 ? report_bug+0x16a/0x190 ? handle_bug+0x51/0xa0 ? exc_invalid_op+0x18/0x80 ? iommu_dma_unmap_page+0xd5/0x100 ? iommu_dma_unmap_page+0x35/0x100 dma_unmap_page_attrs+0x55/0x220 ? bpf_prog_4d7e87c0d30db711_xdp_dispatcher+0x64/0x9f bnxt_rx_xdp+0x237/0x520 [bnxt_en] bnxt_rx_pkt+0x640/0xdd0 [bnxt_en] __bnxt_poll_work+0x1a1/0x3d0 [bnxt_en] bnxt_poll+0xaa/0x1e0 [bnxt_en] __napi_poll+0x33/0x1e0 net_rx_action+0x18a/0x2f0 | 2024-09-04 | not yet calculated | CVE-2024-44984 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: Fix out-of-bound access If an ATU violation was caused by a CPU Load operation, the SPID could be larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[] array). | 2024-09-04 | not yet calculated | CVE-2024-44988 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: tcp: prevent concurrent execution of tcp_sk_exit_batch Its possible that two threads call tcp_sk_exit_batch() concurrently, once from the cleanup_net workqueue, once from a task that failed to clone a new netns. In the latter case, error unwinding calls the exit handlers in reverse order for the 'failed' netns. tcp_sk_exit_batch() calls tcp_twsk_purge(). Problem is that since commit b099ce2602d8 ("net: Batch inet_twsk_purge"), this function picks up twsk in any dying netns, not just the one passed in via exit_batch list. This means that the error unwind of setup_net() can "steal" and destroy timewait sockets belonging to the exiting netns. This allows the netns exit worker to proceed to call WARN_ON_ONCE(!refcount_dec_and_test(&net->ipv4.tcp_death_row.tw_refcount)); without the expected 1 -> 0 transition, which then splats. At same time, error unwind path that is also running inet_twsk_purge() will splat as well: WARNING: .. at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 ... refcount_dec include/linux/refcount.h:351 [inline] inet_twsk_kill+0x758/0x9c0 net/ipv4/inet_timewait_sock.c:70 inet_twsk_deschedule_put net/ipv4/inet_timewait_sock.c:221 inet_twsk_purge+0x725/0x890 net/ipv4/inet_timewait_sock.c:304 tcp_sk_exit_batch+0x1c/0x170 net/ipv4/tcp_ipv4.c:3522 ops_exit_list+0x128/0x180 net/core/net_namespace.c:178 setup_net+0x714/0xb40 net/core/net_namespace.c:375 copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508 create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110 ... because refcount_dec() of tw_refcount unexpectedly dropped to 0. This doesn't seem like an actual bug (no tw sockets got lost and I don't see a use-after-free) but as erroneous trigger of debug check. Add a mutex to force strict ordering: the task that calls tcp_twsk_purge() blocks other task from doing final _dec_and_test before mutex-owner has removed all tw sockets of dying netns. | 2024-09-04 | not yet calculated | CVE-2024-44991 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: iommu: Restore lost return in iommu_report_device_fault() When iommu_report_device_fault gets called with a partial fault it is supposed to collect the fault into the group and then return. Instead the return was accidently deleted which results in trying to process the fault and an eventual crash. Deleting the return was a typo, put it back. | 2024-09-04 | not yet calculated | CVE-2024-44994 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: vsock: fix recursive ->recvmsg calls After a vsock socket has been added to a BPF sockmap, its prot->recvmsg has been replaced with vsock_bpf_recvmsg(). Thus the following recursiion could happen: vsock_bpf_recvmsg() -> __vsock_recvmsg() -> vsock_connectible_recvmsg() -> prot->recvmsg() -> vsock_bpf_recvmsg() again We need to fix it by calling the original ->recvmsg() without any BPF sockmap logic in __vsock_recvmsg(). | 2024-09-04 | not yet calculated | CVE-2024-44996 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix RX buf alloc_size alignment and atomic op panic The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment is affected by the alloc_size passed into napi_build_skb(). The size needs to be aligned properly for better performance and atomic operations. Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic operations may panic on the skb_shinfo(skb)->dataref due to alignment fault. To fix this bug, add proper alignment to the alloc_size calculation. Sample panic info: [ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce [ 253.300900] Mem abort info: [ 253.301760] ESR = 0x0000000096000021 [ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits [ 253.304268] SET = 0, FnV = 0 [ 253.305172] EA = 0, S1PTW = 0 [ 253.306103] FSC = 0x21: alignment fault Call trace: __skb_clone+0xfc/0x198 skb_clone+0x78/0xe0 raw6_local_deliver+0xfc/0x228 ip6_protocol_deliver_rcu+0x80/0x500 ip6_input_finish+0x48/0x80 ip6_input+0x48/0xc0 ip6_sublist_rcv_finish+0x50/0x78 ip6_sublist_rcv+0x1cc/0x2b8 ipv6_list_rcv+0x100/0x150 __netif_receive_skb_list_core+0x180/0x220 netif_receive_skb_list_internal+0x198/0x2a8 __napi_poll+0x138/0x250 net_rx_action+0x148/0x330 handle_softirqs+0x12c/0x3a0 | 2024-09-04 | not yet calculated | CVE-2024-45001 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: vfs: Don't evict inode under the inode lru traversing context The inode reclaiming process(See function prune_icache_sb) collects all reclaimable inodes and mark them with I_FREEING flag at first, at that time, other processes will be stuck if they try getting these inodes (See function find_inode_fast), then the reclaiming process destroy the inodes by function dispose_list(). Some filesystems(eg. ext4 with ea_inode feature, ubifs with xattr) may do inode lookup in the inode evicting callback function, if the inode lookup is operated under the inode lru traversing context, deadlock problems may happen. Case 1: In function ext4_evict_inode(), the ea inode lookup could happen if ea_inode feature is enabled, the lookup process will be stuck under the evicting context like this: 1. File A has inode i_reg and an ea inode i_ea 2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea 3. Then, following three processes running like this: PA PB echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // i_reg is added into lru, lru->i_ea->i_reg prune_icache_sb list_lru_walk_one inode_lru_isolate i_ea->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(i_reg) spin_unlock(&i_reg->i_lock) spin_unlock(lru_lock) rm file A i_reg->nlink = 0 iput(i_reg) // i_reg->nlink is 0, do evict ext4_evict_inode ext4_xattr_delete_inode ext4_xattr_inode_dec_ref_all ext4_xattr_inode_iget ext4_iget(i_ea->i_ino) iget_locked find_inode_fast __wait_on_freeing_inode(i_ea) ----? AA deadlock dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&i_ea->i_state) Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file deleting process holds BASEHD's wbuf->io_mutex while getting the xattr inode, which could race with inode reclaiming process(The reclaiming process could try locking BASEHD's wbuf->io_mutex in inode evicting function), then an ABBA deadlock problem would happen as following: 1. File A has inode ia and a xattr(with inode ixa), regular file B has inode ib and a xattr. 2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa 3. Then, following three processes running like this: PA PB PC echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // ib and ia are added into lru, lru->ixa->ib->ia prune_icache_sb list_lru_walk_one inode_lru_isolate ixa->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(ib) spin_unlock(&ib->i_lock) spin_unlock(lru_lock) rm file B ib->nlink = 0 rm file A iput(ia) ubifs_evict_inode(ia) ubifs_jnl_delete_inode(ia) ubifs_jnl_write_inode(ia) make_reservation(BASEHD) // Lock wbuf->io_mutex ubifs_iget(ixa->i_ino) iget_locked find_inode_fast __wait_on_freeing_inode(ixa) | iput(ib) // ib->nlink is 0, do evict | ubifs_evict_inode | ubifs_jnl_delete_inode(ib) ? ubifs_jnl_write_inode ABBA deadlock ?-----make_reservation(BASEHD) dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&ixa->i_state) Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING to pin the inode in memory while inode_lru_isolate( ---truncated--- | 2024-09-04 | not yet calculated | CVE-2024-45003 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: dcp: fix leak of blob encryption key Trusted keys unseal the key blob on load, but keep the sealed payload in the blob field so that every subsequent read (export) will simply convert this field to hex and send it to userspace. With DCP-based trusted keys, we decrypt the blob encryption key (BEK) in the Kernel due hardware limitations and then decrypt the blob payload. BEK decryption is done in-place which means that the trusted key blob field is modified and it consequently holds the BEK in plain text. Every subsequent read of that key thus send the plain text BEK instead of the encrypted BEK to userspace. This issue only occurs when importing a trusted DCP-based key and then exporting it again. This should rarely happen as the common use cases are to either create a new trusted key and export it, or import a key blob and then just use it without exporting it again. Fix this by performing BEK decryption and encryption in a dedicated buffer. Further always wipe the plain text BEK buffer to prevent leaking the key via uninitialized memory. | 2024-09-04 | not yet calculated | CVE-2024-45004 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: KVM: s390: fix validity interception issue when gisa is switched off We might run into a SIE validity if gisa has been disabled either via using kernel parameter "kvm.use_gisa=0" or by setting the related sysfs attribute to N (echo N >/sys/module/kvm/parameters/use_gisa). The validity is caused by an invalid value in the SIE control block's gisa designation. That happens because we pass the uninitialized gisa origin to virt_to_phys() before writing it to the gisa designation. To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0. kvm_s390_get_gisa_desc() is used to determine which gisa designation to set in the SIE control block. A value of 0 in the gisa designation disables gisa usage. The issue surfaces in the host kernel with the following kernel message as soon a new kvm guest start is attemted. kvm: unhandled validity intercept 0x1011 WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm] Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci] CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6 Hardware name: IBM 3931 A01 701 (LPAR) Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm]) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000 000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff 000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412 000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960 Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4 000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70 #000003d93deb011e: af000000 mc 0,0 >000003d93deb0122: a728ffea lhi %r2,-22 000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e 000003d93deb012a: 9101f0b0 tm 176(%r15),1 000003d93deb012e: a774fe48 brc 7,000003d93deafdbe 000003d93deb0132: 40a0f0ae sth %r10,174(%r15) Call Trace: [<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm] ([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]) [<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm] [<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm] [<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm] [<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm] [<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70 [<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0 [<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0 [<000003d9be0f9a90>] system_call+0x70/0x98 Last Breaking-Event-Address: [<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0 | 2024-09-04 | not yet calculated | CVE-2024-45005 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: char: xillybus: Don't destroy workqueue from work item running on it Triggered by a kref decrement, destroy_workqueue() may be called from within a work item for destroying its own workqueue. This illegal situation is averted by adding a module-global workqueue for exclusive use of the offending work item. Other work items continue to be queued on per-device workqueues to ensure performance. | 2024-09-04 | not yet calculated | CVE-2024-45007 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Linux--Linux | In the Linux kernel, the following vulnerability has been resolved: Input: MT - limit max slots syzbot is reporting too large allocation at input_mt_init_slots(), for num_slots is supplied from userspace using ioctl(UI_DEV_CREATE). Since nobody knows possible max slots, this patch chose 1024. | 2024-09-04 | not yet calculated | CVE-2024-45008 | 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 416baaa9-dc9f-4396-8d5f-8c081fb06d67 |
| Mozilla--Focus for iOS | Websites could utilize Javascript links to spoof URL addresses in the Focus navigation bar This vulnerability affects Focus for iOS < 130. | 2024-09-03 | not yet calculated | CVE-2024-8399 | security@mozilla.org security@mozilla.org |
| Mozilla--Thunderbird | When aborting the verification of an OTR chat session, an attacker could have caused a use-after-free bug leading to a potentially exploitable crash. This vulnerability affects Thunderbird < 128.2. | 2024-09-06 | not yet calculated | CVE-2024-8394 | security@mozilla.org security@mozilla.org |
| n/a--n/a | An issue was discovered in Trusted Firmware-M through 2.0.0. The lack of argument verification in the logging subsystem allows attackers to read sensitive data via the login function. | 2024-09-05 | not yet calculated | CVE-2023-51712 | cve@mitre.org cve@mitre.org |
| n/a--n/a | A Host header injection vulnerability in the password reset function of LimeSurvey v.6.6.1+240806 and before allows attackers to send users a crafted password reset link that will direct victims to a malicious domain. | 2024-09-03 | not yet calculated | CVE-2024-42903 | cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | A cross-site scripting (XSS) vulnerability in SysPass 3.2.x allows attackers to execute arbitrary web scripts or HTML via injecting a crafted payload into the name parameter at /Controllers/ClientController.php. | 2024-09-03 | not yet calculated | CVE-2024-42904 | cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | In OpenStack Ironic before 26.0.1 and ironic-python-agent before 9.13.1, there is a vulnerability in image processing, in which a crafted image could be used by an authenticated user to exploit undesired behaviors in qemu-img, including possible unauthorized access to potentially sensitive data. The affected/fixed version details are: Ironic: <21.4.3, >=22.0.0 <23.0.2, >=23.1.0 <24.1.2, >=25.0.0 <26.0.1; Ironic-python-agent: <9.4.2, >=9.5.0 <9.7.1, >=9.8.0 <9.11.1, >=9.12.0 <9.13.1. | 2024-09-06 | not yet calculated | CVE-2024-44082 | cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | RapidCMS v1.3.1 was discovered to contain a SQL injection vulnerability via the username parameter at /resource/runlogin.php. | 2024-09-06 | not yet calculated | CVE-2024-44838 | cve@mitre.org |
| n/a--n/a | RapidCMS v1.3.1 was discovered to contain a SQL injection vulnerability via the articleid parameter at /default/article.php. | 2024-09-06 | not yet calculated | CVE-2024-44839 | cve@mitre.org |
| n/a--n/a | DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the name parameter in the run_command function. | 2024-09-06 | not yet calculated | CVE-2024-44844 | cve@mitre.org |
| n/a--n/a | DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the value parameter in the filter_string function. | 2024-09-06 | not yet calculated | CVE-2024-44845 | cve@mitre.org |
| n/a--n/a | An issue was discovered in Mbed TLS before 2.28.9 and 3.x before 3.6.1, in which the user-selected algorithm is not used. Unlike previously documented, enabling MBEDTLS_PSA_HMAC_DRBG_MD_TYPE does not cause the PSA subsystem to use HMAC_DRBG: it uses HMAC_DRBG only when MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG and MBEDTLS_CTR_DRBG_C are disabled. | 2024-09-05 | not yet calculated | CVE-2024-45157 | cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue was discovered in Mbed TLS 3.x before 3.6.1. With TLS 1.3, when a server enables optional authentication of the client, if the client-provided certificate does not have appropriate values in if keyUsage or extKeyUsage extensions, then the return value of mbedtls_ssl_get_verify_result() would incorrectly have the MBEDTLS_X509_BADCERT_KEY_USAGE and MBEDTLS_X509_BADCERT_KEY_USAGE bits clear. As a result, an attacker that had a certificate valid for uses other than TLS client authentication would nonetheless be able to use it for TLS client authentication. Only TLS 1.3 servers were affected, and only with optional authentication (with required authentication, the handshake would be aborted with a fatal alert). | 2024-09-05 | not yet calculated | CVE-2024-45159 | cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | An issue was discovered in za-internet C-MOR Video Surveillance 5.2401. Due to improper input validation, the C-MOR web interface is vulnerable to reflected cross-site scripting (XSS) attacks. It was found out that different functions are prone to reflected cross-site scripting attacks due to insufficient user input validation. | 2024-09-05 | not yet calculated | CVE-2024-45176 | cve@mitre.org cve@mitre.org |
| n/a--n/a | SquaredUp DS for SCOM 6.2.1.11104 allows XSS. | 2024-09-03 | not yet calculated | CVE-2024-45180 | cve@mitre.org cve@mitre.org |
| n/a--n/a | The Electron desktop application of Rocket.Chat through 6.3.4 allows stored XSS via links in an uploaded file, related to failure to use a separate browser upon encountering third-party external actions from PDF documents. | 2024-09-02 | not yet calculated | CVE-2024-45621 | cve@mitre.org cve@mitre.org |
| n/a--n/a | Yubico YubiKey 5 Series devices with firmware before 5.7.0 and YubiHSM 2 devices with firmware before 2.4.0 allow an ECDSA secret-key extraction attack (that requires physical access and expensive equipment) in which an electromagnetic side channel is present because of a non-constant-time modular inversion for the Extended Euclidean Algorithm, aka the EUCLEAK issue. Other uses of an Infineon cryptographic library may also be affected. | 2024-09-03 | not yet calculated | CVE-2024-45678 | cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org cve@mitre.org |
| n/a--n/a | tgt (aka Linux target framework) before 1.0.93 attempts to achieve entropy by calling rand without srand. The PRNG seed is always 1, and thus the sequence of challenges is always identical. | 2024-09-06 | not yet calculated | CVE-2024-45751 | cve@mitre.org cve@mitre.org |
| n/a--n/a | RapidCMS v1.3.1 was discovered to contain a SQL injection vulnerability via the password parameter at /resource/runlogin.php. | 2024-09-06 | not yet calculated | CVE-2024-45771 | cve@mitre.org |
| NAC Telecommunication Systems Inc.--NACPremium | Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in NAC Telecommunication Systems Inc. NACPremium allows Blind SQL Injection.This issue affects NACPremium: through 01082024. | 2024-09-02 | not yet calculated | CVE-2024-6919 | iletisim@usom.gov.tr |
| NAC Telecommunication Systems Inc.--NACPremium | Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in NAC Telecommunication Systems Inc. NACPremium allows Stored XSS.This issue affects NACPremium: through 01082024. | 2024-09-02 | not yet calculated | CVE-2024-6920 | iletisim@usom.gov.tr |
| NAC Telecommunication Systems Inc.--NACPremium | Cleartext Storage of Sensitive Information vulnerability in NAC Telecommunication Systems Inc. NACPremium allows Retrieve Embedded Sensitive Data.This issue affects NACPremium: through 01082024. | 2024-09-02 | not yet calculated | CVE-2024-6921 | iletisim@usom.gov.tr |
| Node--https://github.com/nodejs/node | Node.js versions which bundle an unpatched version of OpenSSL or run against a dynamically linked version of OpenSSL which are unpatched are vulnerable to the Marvin Attack - https://people.redhat.com/~hkario/marvin/, if PCKS #1 v1.5 padding is allowed when performing RSA descryption using a private key. | 2024-09-07 | not yet calculated | CVE-2023-46809 | support@hackerone.com |
| Node.js--Node.js | A vulnerability has been identified in Node.js version 20, affecting users of the experimental permission model when the --allow-fs-read flag is used with a non-* argument. This flaw arises from an inadequate permission model that fails to restrict file watching through the fs.watchFile API. As a result, malicious actors can monitor files that they do not have explicit read access to. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js. | 2024-09-07 | not yet calculated | CVE-2023-30582 | support@hackerone.com |
| Node.js--Node.js | fs.openAsBlob() can bypass the experimental permission model when using the file system read restriction with the `--allow-fs-read` flag in Node.js 20. This flaw arises from a missing check in the `fs.openAsBlob()` API. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js. | 2024-09-07 | not yet calculated | CVE-2023-30583 | support@hackerone.com |
| Node.js--Node.js | A vulnerability has been discovered in Node.js version 20, specifically within the experimental permission model. This flaw relates to improper handling of path traversal bypass when verifying file permissions. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js. | 2024-09-07 | not yet calculated | CVE-2023-30584 | support@hackerone.com |
| Node.js--Node.js | A vulnerability in Node.js version 20 allows for bypassing restrictions set by the --experimental-permission flag using the built-in inspector module (node:inspector). By exploiting the Worker class's ability to create an "internal worker" with the kIsInternal Symbol, attackers can modify the isInternal value when an inspector is attached within the Worker constructor before initializing a new WorkerImpl. This vulnerability exclusively affects Node.js users employing the permission model mechanism. Please note that at the time this CVE was issued, the permission model is an experimental feature of Node.js. | 2024-09-07 | not yet calculated | CVE-2023-30587 | support@hackerone.com |
| Node.js--Node.js | Maliciously crafted export names in an imported WebAssembly module can inject JavaScript code. The injected code may be able to access data and functions that the WebAssembly module itself does not have access to, similar to as if the WebAssembly module was a JavaScript module. This vulnerability affects users of any active release line of Node.js. The vulnerable feature is only available if Node.js is started with the `--experimental-wasm-modules` command line option. | 2024-09-07 | not yet calculated | CVE-2023-39333 | support@hackerone.com |
| nodejs--node | A vulnerability has been identified in Node.js, affecting users of the experimental permission model when the --allow-fs-write flag is used. Node.js Permission Model do not operate on file descriptors, however, operations such as fs.fchown or fs.fchmod can use a "read-only" file descriptor to change the owner and permissions of a file. | 2024-09-07 | not yet calculated | CVE-2024-36137 | support@hackerone.com |
| nodejs--node | Bypass incomplete fix of CVE-2024-27980, that arises from improper handling of batch files with all possible extensions on Windows via child_process.spawn / child_process.spawnSync. A malicious command line argument can inject arbitrary commands and achieve code execution even if the shell option is not enabled. | 2024-09-07 | not yet calculated | CVE-2024-36138 | support@hackerone.com |
| NT-ware--uniFLOW Online | The registration process of uniFLOW Online (NT-ware product) apps, prior to and including version 2024.1.0, can be compromised when email login is enabled on the tenant. Those tenants utilising email login in combination with Microsoft Safe Links or similar are impacted. This vulnerability may allow the attacker to register themselves against a genuine user in the system and allow malicious users with similar access and capabilities via the app to the existing genuine user. | 2024-09-02 | not yet calculated | CVE-2024-1621 | 4586e0a2-224d-4f8a-9cb4-8882b208c0b3 4586e0a2-224d-4f8a-9cb4-8882b208c0b3 |
| QNAP Systems Inc.--Download Station | A cross-site scripting (XSS) vulnerability has been reported to affect Download Station. If exploited, the vulnerability could allow authenticated users to inject malicious code via a network. We have already fixed the vulnerability in the following version: Download Station 5.8.6.283 ( 2024/06/21 ) and later | 2024-09-06 | not yet calculated | CVE-2024-38640 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | A buffer copy without checking size of input vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated users to execute code via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.8.2823 build 20240712 and later QuTS hero h5.1.8.2823 build 20240712 and later | 2024-09-06 | not yet calculated | CVE-2024-32763 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QTS | An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow local network users to execute commands via unspecified vectors. We have already fixed the vulnerability in the following versions: QTS 5.1.8.2823 build 20240712 and later QuTS hero h5.1.8.2823 build 20240712 and later | 2024-09-06 | not yet calculated | CVE-2024-38641 | security@qnapsecurity.com.tw |
| QNAP Systems Inc.--QuMagie | An improper certificate validation vulnerability has been reported to affect QuMagie. If exploited, the vulnerability could allow local network users to compromise the security of the system via unspecified vectors. We have already fixed the vulnerability in the following version: QuMagie 2.3.1 and later | 2024-09-06 | not yet calculated | CVE-2024-38642 | security@qnapsecurity.com.tw |
| Unknown--Opti Marketing | The Opti Marketing WordPress plugin through 2.0.9 does not properly sanitise and escape a parameter before using it in a SQL statement via an AJAX action available to unauthenticated users, leading to a SQL injection. | 2024-09-08 | not yet calculated | CVE-2024-6928 | contact@wpscan.com |
| Unknown--TrueBooker | The TrueBooker WordPress plugin before 1.0.3 does not properly sanitise and escape a parameter before using it in a SQL statement via an AJAX action available to unauthenticated users, leading to a SQL injection. | 2024-09-08 | not yet calculated | CVE-2024-6924 | contact@wpscan.com |
| Unknown--TrueBooker | The TrueBooker WordPress plugin before 1.0.3 does not have CSRF check in place when updating its settings, which could allow attackers to make a logged in admin change them via a CSRF attack. | 2024-09-08 | not yet calculated | CVE-2024-6925 | contact@wpscan.com |
| Unknown--WP MultiTasking | The WP MultiTasking WordPress plugin through 0.1.12 does not have CSRF check in place when updating its settings, which could allow attackers to make a logged in admin change them via a CSRF attack | 2024-09-08 | not yet calculated | CVE-2024-6852 | contact@wpscan.com |
| Unknown--WP MultiTasking | The WP MultiTasking WordPress plugin through 0.1.12 does not have CSRF check when updating welcome popups, which could allow attackers to make logged admins perform such action via a CSRF attack | 2024-09-08 | not yet calculated | CVE-2024-6853 | contact@wpscan.com |
| Unknown--WP MultiTasking | The WP MultiTasking WordPress plugin through 0.1.12 does not have CSRF check when updating exit popups, which could allow attackers to make logged admins perform such action via a CSRF attack | 2024-09-08 | not yet calculated | CVE-2024-6855 | contact@wpscan.com |
| Unknown--WP MultiTasking | The WP MultiTasking WordPress plugin through 0.1.12 does not have CSRF check in place when updating its settings, which could allow attackers to make a logged in admin change them via a CSRF attack | 2024-09-08 | not yet calculated | CVE-2024-6856 | contact@wpscan.com |
| Unknown--WP MultiTasking | The WP MultiTasking WordPress plugin through 0.1.12 does not validate and escape some of its shortcode attributes before outputting them back in a page/post where the shortcode is embed, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks | 2024-09-08 | not yet calculated | CVE-2024-6859 | contact@wpscan.com |
| Veeam--Backup and Recovery | A deserialization of untrusted data vulnerability with a malicious payload can allow an unauthenticated remote code execution (RCE). | 2024-09-07 | not yet calculated | CVE-2024-40711 | support@hackerone.com |
| Veeam--Backup and Recovery | An improper input validation vulnerability that allows a low-privileged user to remotely remove files on the system with permissions equivalent to those of the service account. | 2024-09-07 | not yet calculated | CVE-2024-39718 | support@hackerone.com |
| Veeam--Backup and Recovery | A missing authorization vulnerability allows a local low-privileged user on the machine to escalate their privileges to root level. | 2024-09-07 | not yet calculated | CVE-2024-40709 | support@hackerone.com |
| Veeam--Backup and Recovery | A series of related high-severity vulnerabilities, the most notable enabling remote code execution (RCE) as the service account and extraction of sensitive information (savedcredentials and passwords). Exploiting these vulnerabilities requires a user who has been assigned a low-privileged role within Veeam Backup & Replication. | 2024-09-07 | not yet calculated | CVE-2024-40710 | support@hackerone.com |
| Veeam--Backup and Recovery | A path traversal vulnerability allows an attacker with a low-privileged account and local access to the system to perform local privilege escalation (LPE). | 2024-09-07 | not yet calculated | CVE-2024-40712 | support@hackerone.com |
| Veeam--Backup and Recovery | A vulnerability that allows a user who has been assigned a low-privileged role within Veeam Backup & Replication to alter Multi-Factor Authentication (MFA) settings and bypass MFA. | 2024-09-07 | not yet calculated | CVE-2024-40713 | support@hackerone.com |
| Veeam--Backup and Recovery | An improper certificate validation vulnerability in TLS certificate validation allows an attacker on the same network to intercept sensitive credentials during restore operations. | 2024-09-07 | not yet calculated | CVE-2024-40714 | support@hackerone.com |
| Veeam--Nutanix AHV | A server side request forgery vulnerability allows a low-privileged user to perform local privilege escalation through exploiting an SSRF vulnerability. | 2024-09-07 | not yet calculated | CVE-2024-40718 | support@hackerone.com |
| Veeam--One | A vulnerability that allows an attacker to access the NTLM hash of the Veeam Reporter Service service account. This attack requires user interaction and data collected from Veeam Backup & Replication. | 2024-09-07 | not yet calculated | CVE-2024-42019 | support@hackerone.com |
| Veeam--One | A Cross-site-scripting (XSS) vulnerability exists in the Reporter Widgets that allows HTML injection. | 2024-09-07 | not yet calculated | CVE-2024-42020 | support@hackerone.com |
| Veeam--One | An improper access control vulnerability allows an attacker with valid access tokens to access saved credentials. | 2024-09-07 | not yet calculated | CVE-2024-42021 | support@hackerone.com |
| Veeam--One | An incorrect permission assignment vulnerability allows an attacker to modify product configuration files. | 2024-09-07 | not yet calculated | CVE-2024-42022 | support@hackerone.com |
| Veeam--One | An improper access control vulnerability allows low-privileged users to execute code with Administrator privileges remotely. | 2024-09-07 | not yet calculated | CVE-2024-42023 | support@hackerone.com |
| Veeam--One | A vulnerability that allows an attacker in possession of the Veeam ONE Agent service account credentials to perform remote code execution on the machine where the Veeam ONE Agent is installed. | 2024-09-07 | not yet calculated | CVE-2024-42024 | support@hackerone.com |
| Veeam--Veeam Service Provider Console | An authentication bypass vulnerability can allow a low privileged attacker to access the NTLM hash of service account on the VSPC server. | 2024-09-07 | not yet calculated | CVE-2024-38650 | support@hackerone.com |
| Veeam--Veeam Service Provider Console | A code injection vulnerability can allow a low-privileged user to overwrite files on that VSPC server, which can lead to remote code execution on VSPC server. | 2024-09-07 | not yet calculated | CVE-2024-38651 | support@hackerone.com |
| Veeam--Veeam Service Provider Console | A code injection vulnerability that permits a low-privileged user to upload arbitrary files to the server, leading to remote code execution on VSPC server. | 2024-09-07 | not yet calculated | CVE-2024-39714 | support@hackerone.com |
| Veeam--Veeam Service Provider Console | A code injection vulnerability that allows a low-privileged user with REST API access granted to remotely upload arbitrary files to the VSPC server using REST API, leading to remote code execution on VSPC server. | 2024-09-07 | not yet calculated | CVE-2024-39715 | support@hackerone.com |
| WP Engine--Advanced Custom Fields | Cross-site scripting vulnerability exists in Advanced Custom Fields versions 6.3.5 and earlier and Advanced Custom Fields Pro versions 6.3.5 and earlier. If an attacker with the 'capability' setting privilege which is set in the product settings stores an arbitrary script in the field label, the script may be executed on the web browser of the logged-in user with the same privilege as the attacker's. | 2024-09-04 | not yet calculated | CVE-2024-45429 | vultures@jpcert.or.jp vultures@jpcert.or.jp vultures@jpcert.or.jp vultures@jpcert.or.jp |
Please share your thoughts
We recently updated our anonymous product survey; we’d welcome your feedback.